Related
Hello,
Im using aosp 6.0.1. Then i instal supersu 2.78 stable. I don't type "SYSTEMLESS=true" on twrp, but supersu automatically installed as systemless mode.
How to prevent it?
exodius48 said:
Hello,
Im using aosp 6.0.1. Then i instal supersu 2.78 stable. I don't type "SYSTEMLESS=true" on twrp, but supersu automatically installed as systemless mode.
How to prevent it?
Click to expand...
Click to collapse
Try my system mode version.
exodius48 said:
Hello,
Im using aosp 6.0.1. Then i instal supersu 2.78 stable. I don't type "SYSTEMLESS=true" on twrp, but supersu automatically installed as systemless mode.
How to prevent it?
Click to expand...
Click to collapse
Pls help same problem how to fix
Tell if you've found any solution
Sent from my Redmi Note 3 using Tapatalk
dastan4eva said:
Pls help same problem how to fix
Tell if you've found any solution
Click to expand...
Click to collapse
Its imposible to fix. Depend on rom , supersu will install best root method because every rom has different supolicy.
Sent from my kenzo using XDA Labs
@topjohnwu has already released the Systemless Xposed Framework based on Magisk, an awesome universal systemless interface. But since official Xposed Framework is not compatible with MIUI, I am trying a hand on porting Xposed Framework for MIUI to Magisk with @SolarWarez's work.
At first I think app_process should be modified to adjust for magisk path detection. Fortunately, I found that app_process is the same as official release. So I have only a little work to do based on the work @topjohnwu has already done. Since I do not have a device running MIUI, I decide to upload it here to give it a test, although it should work.
Whether it works or not, please report!
Prerequisite:
Magisk is required to be installed on your device.
Magisk v8 - The Universal Systemless Interface
Support Devices:
Devices running MIUI with Magisk V7+
Downloads:
Like the original Systemless Xposed Framework, ARM/ARM64/X86 devices use the same flashable zip (X86-64 is being worked on)
As for system versions, please follow this:
Android 5.0: SDK21 Android 5.1: SDK22 Android 6.0: SDK23
Install Guide:
- Follow the instructions in Magisk thread to install Magisk
- Install Material Designed Xposed Installer instead of official Xposed Installer, official Xposed Installer will not detect the /magisk/xposed path.
- Make a nandroid backup
- Flash the compatible zip through a custom recovery
- Reboot and wait for the magic
- (For uninstallation) Remove the Xposed Magisk Module within Magisk Manager or flash the uninstall zip placed in Original Systemless Xposed Framework Thread
OTA:
It is reported that MIUI will verify the boot partition when applying OTA. So if you want to accept OTA, please flash the stock boot.img first.
Sources:
As I actually do not do any hex edit or decompile, and Xposed for MIUI is close-source, the zip you download is the source. But I want to place it here in case somebody wants it.
https://github.com/aviraxp/xposed_21_miui
https://github.com/aviraxp/xposed_22_miui
https://github.com/aviraxp/xposed_23_miui
Credits:
@rovo89 for creating the awesome Xposed Framework
@SolarWarez for making Xposed Framework compatible with MIUI
@topjohnwu for the amazing work on Magisk and Systemless Xposed Framework
All credits go to them.
If you just follow up the steps and encounter a bootloop/not working issue, please feel free to tell me. But since I am not a professional dev, what I can do is try my best to help you.
Reserved
Hi,
I'm very happy to see someone working on miui systemless. Thx for your job.
But I'm not sure to understand how to install all of this precisely. And I'm lost between Magic and Suhide.
Edit : I trying @MaArCiN074 files (link) without succes : http://forum.xda-developers.com/showpost.php?p=69242924&postcount=3162
MrOops said:
Hi,
I'm very happy to see someone working on miui systemless. Thx for your job.
But I'm not sure to understand how to install all of this precisely. And I'm lost between Magic and Suhide.
Edit : I trying @MaArCiN074 files (link) without succes : http://forum.xda-developers.com/showpost.php?p=69242924&postcount=3162
Click to expand...
Click to collapse
Seems miui has its own su file. Try to delete /system/xbin/su in file explorer.
Now, I have proper installation rom (without root). I have just /system/bin/
Nothing in side
Bro tried on mi4w with miui 8 and its working perfect!!
Sent from my MI 4W using Tapatalk
saiyammorakhiya said:
Bro tried on mi4w with miui 8 and its working perfect!!
Sent from my MI 4W using Tapatalk
Click to expand...
Click to collapse
Very thanks for the report.
aviraxp said:
Very thanks for the report.
Click to expand...
Click to collapse
Ur most wc! N thnk u
Sent from my MI 4W using Tapatalk
saiyammorakhiya said:
Bro tried on mi4w with miui 8 and its working perfect!!
Sent from my MI 4W using Tapatalk
Click to expand...
Click to collapse
Do you have install surpersu v2.78 RC1 in systemless or just phh-superuser-magisk-r259?
perfect on mi4c with miui8,OTA not test,THX
Working great
MrOops said:
Do you have install surpersu v2.78 RC1 in systemless or just phh-superuser-magisk-r259?
Click to expand...
Click to collapse
Just installed phh
Sent from my MI 4W using Tapatalk
Ok. Thx
Module xposed work but no root for my app like titanium backup, etc... :/
MrOops said:
Hi,
I'm very happy to see someone working on miui systemless. Thx for your job.
But I'm not sure to understand how to install all of this precisely. And I'm lost between Magic and Suhide.
Edit : I trying @MaArCiN074 files (link) without succes : http://forum.xda-developers.com/showpost.php?p=69242924&postcount=3162
Click to expand...
Click to collapse
I have done the same as in a first post (repacked original one with SolarWarez files), so if my version doesn't work for you, aviraxp's one shouldn't work too. The problem is related to different part, maybe Magisk or other framework, or you have made so many changes in android core. Maybe you can try to reflash MIUI and try again.
work fine on miui 8 mi4 lte
Guys...I need to know a thing about MAGISK.
I would install it on a stock dev china rom.
It has a partial root(I can't write on system partition)
Flashify works good to flash .img files (and maybe .zip files)
But, if I want to update OTA every week my rom, I CAN'T install twrp. (I have a redmi3, it has dm-verity and it cause a bootloop with original rom+twrp)
I want to know if I can install MAGISK zip with flashify, so I can use Xposed and ota updates withoit bootloop.
Thx @MaArCiN074 i Try this in two weeks. (I'm very busy )
Tested with phh supersu and automagisk. Installed material design Xposed apk. When I flash miui Xposed is telling me that can extract binaries and flash on my miui8. Help
Inviato dal mio Redmi Note 2 utilizzando Tapatalk
Hi, Ota fails, Mi5, MIUI8!!! Thx!
What about MM?
Any plans for Android 6.0? MIUI8 on Redmi Note 3 Pro (SD650)?
Hello guys. I'm tempted to install Magisk on my Zenfone 2 ZE551ML. I have the latest CM13 Nightly + Xposed and I want to ask if Magisk has any problem running alongside these two.
Another question is if I can still use the built in CM13 root.
Thanks for your answers!
Im running on CM 13 (ZenFone 2 Laser ZOOL) stable and it works fine.
The only problem is that with xposed active the safetynet check don't pass. But its just a matter of disabling xposed and rebooting when necessary.
I dont know if the differences are too significant, but hope it helps.
FHC1998 said:
Im running on CM 13 (ZenFone 2 Laser ZOOL) stable and it works fine.
The only problem is that with xposed active the safetynet check don't pass. But its just a matter of disabling xposed and rebooting when necessary.
I dont know if the differences are too significant, but hope it helps.
Click to expand...
Click to collapse
That means Magisk doesn't work with Xposed ? Or I just have to unninstall Xposed and then install again after installing Magisk ?
PedroCaseiro said:
That means Magisk doesn't work with Xposed ? Or I just have to unninstall Xposed and then install again after installing Magisk ?
Click to expand...
Click to collapse
Magisk itself works perfectly with Xposed installed, only Magisk Hide that doesn't hide Xposed.
So if you don't plan on using any app that checks Safety Net (Pokemon Go, Android Pay, for example) You won't have any problem.
FHC1998 said:
Magisk itself works perfectly with Xposed installed, only Magisk Hide that doesn't hide Xposed.
So if you don't plan on using any app that checks Safety Net (Pokemon Go, Android Pay, for example) You won't have any problem.
Click to expand...
Click to collapse
and what about the built in CM13 root ?
I think the newest Magisk auto removes it when you flash it.
But I had manually removed before installing magisk on mine.
But in any case, if I remember correctly you can just remove it thru the SuperSU app before flashing Magisk.
FHC1998 said:
I think the newest Magisk auto removes it when you flash it.
But I had manually removed before installing magisk on mine.
But in any case, if I remember correctly you can just remove it thru the SuperSU app before flashing Magisk.
Click to expand...
Click to collapse
I'll try it then and hope not to **** up my phone. Thanks
Sent from my Asus ZenFone 2 using XDA Labs
PedroCaseiro said:
I'll try it then and hope not to **** up my phone. Thanks
Click to expand...
Click to collapse
No problem. Just remember to make a nandroid backup first if you are worried.
I'm trying to install the Viper4Android 2.5.0.5 module in Magisk. I installed the module and the app and then rebooted, but the driver status in Viper4Android under enabled indicates a "no".
I've tried some of the settings, but it does not seem to work. The sound is all the same. Any idea how to get this to work? There were no additional instructions for getting V4A to work.
Nexus 6 running Pure Nexus 7.1.2 with Magisk version 12.0
I've had great success on several different devices with this module: https://forum.xda-developers.com/apps/magisk/module-viper4android-fx-2-5-0-5-t3577058
Didgeridoohan said:
I've had great success on several different devices with this module: https://forum.xda-developers.com/apps/magisk/module-viper4android-fx-2-5-0-5-t3577058
Click to expand...
Click to collapse
I can confirm that the above link works great..
I was hoping I didn't have to use that workaround, but I guess I have no choice. I don't know if anyone will agree with me, but I find it annoying to have to decipher and read through all these guides and forum posts to figure out how to get something to work. I wish things just "worked".
MiuKing said:
I was hoping I didn't have to use that workaround, but I guess I have no choice. I don't know if anyone will agree with me, but I find it annoying to have to decipher and read through all these guides and forum posts to figure out how to get something to work. I wish things just "worked".
Click to expand...
Click to collapse
Everyone has different devices, different setups, etc. It's never going to "just work" easily for everyone. That said, the link above works great and doesn't really have much reading to do....
Only issue I had was it not working initially, but I set the mode to "compatible" instead of "normal" it instantly started working. In case you have issues with it not starting like I did.
Hello, I have a OnePlus 3T (Oreo - 8.0.0 - OxygenOS Open 20 ) I was in the big sh*t installing this app but now it's working so what I do ?
I simply install 4/5 things :
- Viper4Android APK here ( http://www.mediafire.com/file/xonl4jha2e4vez1/ViPER4Android_FX_v2505.zip )
- BusyBox you can get it on the Play Store
- This Magisk module for OP3T but if you have an other phone search an other compatible module ( https://androidfilehost.com/?fid=673368273298977808 )
- The SELinux Switch [IMPORTANT] ( https://forum.xda-developers.com/devdb/project/?id=22073#downloads )
UNINSTALL ALL PREVIOUS VERSIONS OF V4A ON YOUR DEVICE.
Now I'm gona show you how to get this sh*t working
Simply install unzip the Viper4Android folder and install this apk :
ViPER4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk
(Maybe a newer version can be delivered in the future I think you can install it).
Then install BusyBox.
Open V4A and install the Drivers.
When it's done go to Magisk -> Modules -> + and install the zip module for your device.
/!\REBOOT /!\
Finally you just have to install The SELinux Switch.apk and switch your SELinux to Permissive (maybe you have to reboot but for me when I reboot my SELinux go back to Enforcing SELinux so I switch it back when I reboot).
[Note : I don't know if it's important but I was flashing a zip of V4A that's install me V4A as a system app and it wasn't working (error I/O) this is not important but it maybe install me other files so maybe you have to do this if it's not working at the end].
V4A is working now (don't forget to switch off your stock equalizer in Settings -> Sound -> Balance)
If you have any problem or questions contact me.
Franck7519 said:
Hello, I have a OnePlus 3T (Oreo - 8.0.0 - OxygenOS Open 20 ) I was in the big sh*t installing this app but now it's working so what I do ?
I simply install 4/5 things :
Click to expand...
Click to collapse
My dude, you are doing way more then you have to. Just install Ahrions magisk viper module. It has all the patches for OOS Oreo to work (it seems OnePlus made it impossible for viper to work on Enforcing with their Oreo release -.-)
Sent from my LG Nexus 5X using XDA Labs
Skittles9823 said:
My dude, you are doing way more then you have to. Just install Ahrions magisk viper module. It has all the patches for OOS Oreo to work (it seems OnePlus made it impossible for viper to work on Enforcing with their Oreo release -.-)
Click to expand...
Click to collapse
No because V4A is not working when SELinux is on enforcing bru this is why I install the switcher and it's working but if a problem comes I will test with your module.
Franck7519 said:
No because V4A is not working when SELinux is on enforcing bru this is why I install the switcher and it's working but if a problem comes I will test with your module.
Click to expand...
Click to collapse
The module I suggested automatically sets permissive on boot for OOS devices.
Sent from my LG Nexus 5X using XDA Labs
Skittles9823 said:
The module I suggested automatically sets permissive on boot for OOS devices.
Click to expand...
Click to collapse
It's better than my method yet I'm agree but I don't find your module can you send me a link ?
Franck7519 said:
It's better than my method yet I'm agree but I don't find your module can you send me a link ?
Click to expand...
Click to collapse
Look at the previous link in this thread. That's the one (it requires Magisk 15+ to work).
Sent from my LG Nexus 5X using XDA Labs
Skittles9823 said:
Look at the previous link in this thread. That's the one (it requires Magisk 15+ to work).
Click to expand...
Click to collapse
Ok thanks bru
Hey everyone
I've tried multiple roms. Nougat especially. But the one thing i'm desperate about is Amplify and apparently it's not working. I've tried on every rom the SDK 25 from Topjohnwu but it doesn't work. The one thing I need is Amplify.
So i want to go back to a marsmallow rom (by preference RR rom) so that i can install Xposed. Anyone got a link to good rom or a name...
Thanks in advance.
Greetings from someone who needs Amplify to minimize his wakelocks...
Hansbeeman said:
Hey everyone
I've tried multiple roms. Nougat especially. But the one thing i'm desperate about is Amplify and apparently it's not working. I've tried on every rom the SDK 25 from Topjohnwu but it doesn't work. The one thing I need is Amplify.
So i want to go back to a marsmallow rom (by preference RR rom) so that i can install Xposed. Anyone got a link to good rom or a name...
Thanks in advance.
Greetings from someone who needs Amplify to minimize his wakelocks...
Click to expand...
Click to collapse
Asking for "best | good ROM" is bullsh*t. Everyone has different needed.
Search for "CM 13 OnePlus 3T", make your own view, and flash the one you want.
Plus, create a thread for this kind of question is useless, you could have search by your own first.
casual_kikoo said:
Asking for "best | good ROM" is bullsh*t. Everyone has different needed.
Search for "CM 13 OnePlus 3T", make your own view, and flash the one you want.
Plus, create a thread for this kind of question is useless, you could have search by your own first.
Click to expand...
Click to collapse
I've searched for hours and the one you name, i've alreafy tried. When i put sdk 23 on it, i'm in bootloop... Any other suggestions?
Hansbeeman said:
I've searched for hours and the one you name, i've alreafy tried. When i put sdk 23 on it, i'm in bootloop... Any other suggestions?
Click to expand...
Click to collapse
SDK 23 of what ? I don't even know what you're talking about, "SDK 23" alone doesn't mean anything.
OMG! I thought this is friendly noob Q&A thread.
I was looking for some 6.0 rom compatible with xposed. I just found sultan´s cm13(the best for me), OOS 3.5.4 and RR 6.0 of Eliminater. be sure to use arm64 sdk23 but if you use magisk there is a thread specifically about xposed and magisk
casual_kikoo said:
SDK 23 of what ? I don't even know what you're talking about, "SDK 23" alone doesn't mean anything.
Click to expand...
Click to collapse
Sdk 23 of xposed framework in Magisk.
WOS17 said:
OMG! I thought this is friendly noob Q&A thread.
I was looking for some 6.0 rom compatible with xposed. I just found sultan´s cm13(the best for me), OOS 3.5.4 and RR 6.0 of Eliminater. be sure to use arm64 sdk23 but if you use magisk there is a thread specifically about xposed and magisk
Click to expand...
Click to collapse
I dont consider myself as noob. Nor as expert. But I already flashed cm13 and Oos 3.5.4. Installing magisk14.0.zip is always a succes. But when I go in Magisk under 'modules' and download SDK23 of Topjohnwu's systemless xposed module. After that I need to restart and i'm stuck in bootloop...
Normaly xposed should work for MM roms !?
Look at this https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268 and maybe consider magisk 13.3.
WOS17 said:
Look at this https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268 and maybe consider magisk 13.3.
Click to expand...
Click to collapse
Aha, thank you. I will try this and will let you know if it worked ! Would be so happy if this worked !
Hansbeeman said:
I dont consider myself as noob. Nor as expert. But I already flashed cm13 and Oos 3.5.4. Installing magisk14.0.zip is always a succes. But when I go in Magisk under 'modules' and download SDK23 of Topjohnwu's systemless xposed module. After that I need to restart and i'm stuck in bootloop...
Normaly xposed should work for MM roms !?
Click to expand...
Click to collapse
Consider flashing Xposed as a system mod, this doesn't affect SafetyNet, as long as you disable Xposed in its installer, when you want to use Android Pay or Pokemon Go. I also had bootloop problems when I tried to flash systemless Xposed, a system one works reliably.
przemcio510 said:
Consider flashing Xposed as a system mod, this doesn't affect SafetyNet, as long as you disable Xposed in its installer, when you want to use Android Pay or Pokemon Go. I also had bootloop problems when I tried to flash systemless Xposed, a system one works reliably.
Click to expand...
Click to collapse
I'm don't mind that Android Pay or pokémon go don't work. But Snapchat won't work either. It's an app I like to use.
I read a little bit on the thread someone above linked me and will try this. Will let you guys now. Now i'm back on my daily driver (RR Zenith 7.1.2). Will try to install xposed on it, and get Amplify to work.
Hansbeeman said:
I'm don't mind that Android Pay or pokémon go don't work. But Snapchat won't work either. It's an app I like to use.
I read a little bit on the thread someone above linked me and will try this. Will let you guys now. Now i'm back on my daily driver (RR Zenith 7.1.2). Will try to install xposed on it, and get Amplify to work.
Click to expand...
Click to collapse
Login to Snapchat before installing Xposed, they use SafetyNet only druing signing in.
Don't use outdated software for a buggy hack. Use Nougat, it has better battery than Marshmallow anyway.
Hansbeeman said:
Hey everyone
I've tried multiple roms. Nougat especially. But the one thing i'm desperate about is Amplify and apparently it's not working. I've tried on every rom the SDK 25 from Topjohnwu but it doesn't work. The one thing I need is Amplify.
So i want to go back to a marsmallow rom (by preference RR rom) so that i can install Xposed. Anyone got a link to good rom or a name...
Thanks in advance.
Greetings from someone who needs Amplify to minimize his wakelocks...
Click to expand...
Click to collapse
What are you talking about?
Why do you need a custom rom for an older Android version, when Xposed+Amplify work fine for stock 4.1.7 OS??
Unleashed by ONEPLUS 3T rooted
RASTAVIPER said:
What are you talking about?
Why do you need a custom rom for an older Android version, when Xposed+Amplify work fine for stock 4.1.7 OS??
Unleashed by ONEPLUS 3T rooted
Click to expand...
Click to collapse
How do you got Amplify to work? I got the newest systemless xposed v87.3 (just released). But Amplify still won't work...
Hansbeeman said:
How do you got Amplify to work? I got the newest systemless xposed v87.3 (just released). But Amplify still won't work...
Click to expand...
Click to collapse
Amplify needs to be converted to system app in order to work properly .
Unleashed by ONEPLUS 3T rooted
RASTAVIPER said:
Amplify needs to be converted to system app in order to work properly .
Unleashed by ONEPLUS 3T rooted
Click to expand...
Click to collapse
Did that. Didn't work ... Any tips ?
Hansbeeman said:
Did that. Didn't work ... Any tips ?
Click to expand...
Click to collapse
Give rights 777 for the Amplify folder at /system/priv-app .
Unleashed by ONEPLUS 3T rooted
RASTAVIPER said:
Give rights 777 for the Amplify folder at /system/priv-app .
Unleashed by ONEPLUS 3T rooted
Click to expand...
Click to collapse
This was something I didn't know. But I did it now. Still doesn't work ... Any other tips.
I have OP3T, Magisk 14.0, with SDK 87.3 (it works). I have Zenity Resurection Remix 7.1.2. Could it be that it has something to do with the inbuilt Wakeblock app in both the RR settings and as an individual app... ?
"added WakeBlock: Blocking the drain before it’s too late (Core v2.0) - big thanks to @GioBozza" (https://forum.xda-developers.com/on...ment/rom-zenity-resurrection-remix-n-t3551384)
Hansbeeman said:
This was something I didn't know. But I did it now. Still doesn't work ... Any other tips.
I have OP3T, Magisk 14.0, with SDK 87.3 (it works). I have Zenity Resurection Remix 7.1.2. Could it be that it has something to do with the inbuilt Wakeblock app in both the RR settings and as an individual app... ?
"added WakeBlock: Blocking the drain before it’s too late (Core v2.0) - big thanks to @GioBozza" (https://forum.xda-developers.com/on...ment/rom-zenity-resurrection-remix-n-t3551384)
Click to expand...
Click to collapse
Did u reboot the mobile after changing the rights of the folder?
In my case with stock 4.1.7 it works just fine.
Unleashed by ONEPLUS 3T rooted