I have got moto-x xt1052 running lollipop Asia version
Network works fine in gsm (2G) mode but it shows no service in 3G and LTE mode
Vodafone IN 2G works not 3G and 4G, Reliance JIO doesn't works since it has only LTE
I tried resetting the phone and flashed the stock rom
Run test in *#*#INFO#*#* mode, in SMSC it shows my number
Even flashed the modem files but also it show no service
How can i get back LTE mode?, help me guys
Since a few days ago, my Moto X also has no service, regardless of what the preferred mode is set to. It simply sees no carriers at all. Anybody got an idea how I can debug this? One idea is that the GSM antenna has disconnected itself somehow, but I don't even know where it is.
Related
Hi All,
I am starting a new thread for India specific networks on the Bionic.
I am new to this so please don't mind if i write anything stupid which i may haven't understood yet.
I got my Droid Bionic running on Stock ICS from States to India and inserted a couple of GSM sims which worked fine for a while without any tweaks. I used my device for one whole day(made calls didn't test data) and when in the morning i woke up there was no network. At that time in *#*#info#*#* it was showing as detecting network but as soon as the location updated, GSM would show out of service.
What i have done so far:
1. I flashed Eclipse ICS v 1.2 ROM and got network though very weak but couldn't make no calls.
2. I got ICARUS HD - 1.6.1 and applied the tweaks as mentioned in phone and got network stength increased but still no calls but a strange thing happened when i tweaked with build prop editor running ICARUS HD, when i changed to WCDMA Preferred and turned radio off and on it registered on the network gave full strength and GSM: showed in service as well, though this was only for 10-15 seconds and i couldn't test call.
3. Now I'm running CM 10 - released on Jan 18th and to my amaze I can use 2G Data though GSM state is Emergency Calls Only.
Following might be helpful to understand:
Current Network: TATA DOCOMO
Signal Strength: -99 dBm 5 asu
Neighboring CID: Unknown
Cellinfo: Blank
Roaming: Not Roaming
GSM Service: Emergency Calls Only
GPRS Service: Connected
Network type: EDGE(Also shows EDGE2 at times)
Message Waiting: False
Call redirect: false
Call Status: Idle
Preferred network type:
WCDMA preferred
I have changed to gsm only, gsm auto and all others applicable to no help.
I am trying to run my phone in India on network: Tata Docomo which probably operates on 1800 or it could be 1900 on 3G.
One thing which i am sure of now is that this phone certainly has all GSM capabilities and its some tweak which is required which i cant figure out. I have personally seen my phone making calls and now its running data as well.
Please help me on this!
Seems like settings changed with build prop to run on T-Mobile or AT&T dont seem to work for networks in India. Tmobile operates on 1900 and Tata Docomo on 1800
One thing which wont let me sleep is that why did it run perfectly at first and why did it fail if i did nothing to it. Can the network block the IMEI or something of that sort happened. It's been two sleepless nights for me now, now praying to the Radio God!! LOL!
Did you manage to get it to work? You might be right in thinking that it might be related to IMEI. Did you try and find out if the IMEI is considered valid by your operator since this is not a true worldphone its IMEI might not be in their database?
uhm said:
Did you manage to get it to work? You might be right in thinking that it might be related to IMEI. Did you try and find out if the IMEI is considered valid by your operator since this is not a true worldphone its IMEI might not be in their database?
Click to expand...
Click to collapse
Didn't work. I had to give up on it. There was actually no way in which i could get it checked with the network.
I sold it off on Craigslist last July!
I now have bought another one to test. Waiting to get back to India to test it again.
Not all bionic works with gsm, only wcdma. It's HW A after 36/11 and HW B
texan_mirage said:
Didn't work. I had to give up on it. There was actually no way in which i could get it checked with the network.
I sold it off on Craigslist last July!
I now have bought another one to test. Waiting to get back to India to test it again.
Click to expand...
Click to collapse
It's quite interesting that it did work perfectly initially and then with CM10, the data worked. Did CM10 rom include its own radio as well?
I found something interesting in this thread (not related to Bionic):
http://forum.xda-developers.com/showthread.php?t=945312
Good luck with your new Bionic! Does it work okay with GSM carriers in the US?
I finally got to try it and unfortunately it didn't work for me. Mine is HW A '12 Bionic and I am on ICS. If I go outside my house and search for networks, I get to see only one network(not mine). I see extremely weak signal in the phone info screen and also it shows gsm out of service. I tried 3 sims from different operators. Inside my house, nothing ever shows up. In other phones, I get to see many operators. Seems like it's definitely a signal strength issue if the gsm 900/1800mhz and wcdma 2100mhz bands are not locked. I'm not sure at this point what is the real cause. I even tried flashing just the radios from GB versions as complete downgrading is supposed to brick the device. Needless to say it didn't help. I'm still investigating and experimenting.
uhm said:
I finally got to try it and unfortunately it didn't work for me. Mine is HW A '12 Bionic and I am on ICS. If I go outside my house and search for networks, I get to see only one network(not mine). I see extremely weak signal in the phone info screen and also it shows gsm out of service. I tried 3 sims from different operators. Inside my house, nothing ever shows up. In other phones, I get to see many operators. Seems like it's definitely a signal strength issue if the gsm 900/1800mhz and wcdma 2100mhz bands are not locked. I'm not sure at this point what is the real cause. I even tried flashing just the radios from GB versions as complete downgrading is supposed to brick the device. Needless to say it didn't help. I'm still investigating and experimenting.
Click to expand...
Click to collapse
Hi,
I have now tried everything possible with the Bionic to run it on GSM network in India but it has failed to respond. I tried both hardware versions and can confirm that it is not registered as a world phone like most of new Verizon devices.
The worst thing which still bothers me is how and why did it work once(Yes, I made and receive calls on Docomo network in India). It will still show network strength , detect network but not register. I cant find no answers to it and have given up on this. The model is now obsolete and is clearly not a world phone in my dictionary but I won't deny it having GSM capability having seen it work personally. I have finally dumped the other bionic as well.
Good luck with your experimentation though!
I have an unlocked Galaxy S4 active i9295 and I cannot get the 4G or the LTE working since I do not have even the option I only have WCDMA/GSM I travel around the world with this phone and now I am in Ireland on 3 and still I am getting H+ showing and not LTE or 4G. Is there a way to activate 4G or is there any special 4G sims ?
I would check your APN settings, seeing how you are unlocked, the proper APN may not be installed to match your Sim, check with your carrier, to make sure they are 4G and LTE capable and get their settings.
Sent Via Smoke Signals
Try ShowServiceMode. It should help to unlock LTE band. It worked for me here in Poland, because local career's LTE was locked by my Russian firmware. But using this program I can only switch between phone calls (GSM/3G) and LTE, they cannot work simultaneously.
Thank you guys. One major thing is that why I can even see the option in the settings? If anyone else has some information please help out.
Thanks
I just purchased a Verizon-branded VS980, for use with Cityfone (on the Rogers network). I have no problems with voice calls, and my APN settings seem to have automatically populated from my SIM card and look correct. I believe this phone should be able to pick up LTE (700mhz) in my area, and it should support the hspa frequencies.
Anyway, I have rooted and installed cyanogenmod, but that had no effect. I've selected just LTE networks, just HSPA, or just GSM - it connects to HSPA and GSM, but I get data on neither. It shows GSM Disconnects: =======Data======= on the phone info screen
It was like this with the stock rom, and I have rooted and updated the ROM to Cyaonogenmod to see if that would change anything. It made no difference. I am using baseband 24A if that matters.
Can someone tell me what I'm missing?
I seem to cant get any LTE connection on my at&t moto x.ive downloaded the phone testing app and i cant change it to LTE/GSM or any LTE connection for that matter it stays on GSM auto. Any help or ideas please? As of right now im only getting hspa/hspa+ connection
Google your carriers APN settings and see if yours match.
Other than that, it can only be a Sim card issue or carrier issue. Assuming you mean an AT&T model phone on at&t's network.
Or is it on another network? If so.... You may not have the bands supported on the phone that your carrier uses. Nothing you can do about that if so.
So here's the deal, I have scoured the intarwebs and can't seem that find a solution to my problem, so as such I will toss my problems before you.
I have a Verizon Nexus 6 stock ROM, bootloader unlocked and rooted, TWRP with the current Franco Kernel. No other mods. So here's the issue, I can get LTE, but when the phone hands over to 3g service I get stuck there. The phone remains in 3g until I am forced to go to the cellular network menu and choose lte/gsm/umts so that it ignores CDMA. Once it finds lte again (almost instantly) I can return to global or even the lte/CDMA and have no issues until LTE drops and I have to do it again. I have even gone and got a new SIM with no fix.
Any ideas on a solution