Database Develop

Roll back to b609 from b805

Hi. Anybody nows how to rollback from b805 to b609? I tried to flash it from dload but the update always fails. The b805 beta has to many bugs and I want to downrade to b609 or b133

konstantinosmis said:
Hi. Anybody nows how to rollback from b805 to b609? I tried to flash it from dload but the update always fails. The b805 beta has to many bugs and I want to downrade to b609 or b133
Click to expand...
Click to collapse
Originally Posted by andromodgod
I Downgraded to B609 .
First Using Huawei Update Extractor Extract The System Boot and Recovery img .... then reboot into CWM and Wipe Everything ... I.e System data boot cust sdcard .. everything ....
then go to advanced and reboot into bootloader mode and flash B609 imgs ..... then reboot and u will be in B609 .... now i am going to again install B609 Using Update.app and then gonna upgrade to B805

majcomtech said:
Originally Posted by andromodgod
I Downgraded to B609 .
First Using Huawei Update Extractor Extract The System Boot and Recovery img .... then reboot into CWM and Wipe Everything ... I.e System data boot cust sdcard .. everything ....
then go to advanced and reboot into bootloader mode and flash B609 imgs ..... then reboot and u will be in B609 .... now i am going to again install B609 Using Update.app and then gonna upgrade to B805
Click to expand...
Click to collapse
i`m in the same situation .. nou a dont have keybd, wless etc and cant downgrade to B609
i`ve tried to flash system.img B609 withh fastboot, but the file is to big
please help

Just flash CWM 6.0.5.0 recovery. then install My-ROM 3.0. after installling My-ROM 3.0. Flash stock recovery 3.0 and proceed with B609 UPDATE.APP. then update again to B805.

thx, now i install B609 stock

Hi Folks,
I want also rollback but it dont work i dont can flash cmw see picture.
Can anybody please help me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

rubberduck84 said:
Hi Folks,
I want also rollback but it dont work i dont can flash cmw see picture.
Can anybody please help me.
Click to expand...
Click to collapse
is your bootloader unlocked ?? Most Of The Users Unlocked Bootloaders When We was rooting Emui 2.3

I have a locket bootloader
Sent from my HUAWEI P7-L10 using XDA Free mobile app

andromodgod said:
is your bootloader unlocked ?? Most Of The Users Unlocked Bootloaders When We was rooting Emui 2.3
Click to expand...
Click to collapse
I have this problem when flashing system.img and my bootloader is unlocked

Hello guys,
I'm in the same situation, could you please with some steps or a tutorial how to revert it.

Huawei P8 Lite Android 6.0 Marshmallow B564 Root

Huawei P8 Lite Android 6.0 Marshmallow B564 Root
I want to create a topic about how to root new version of Android 6.0 B564 P8 Lite phone. :cyclops:
Write here any suggestion please:

damian12866 said:
Huawei P8 Lite Android 6.0 Marshmallow B564 Root
I want to create a topic about how to root new version of Android 6.0 B564 P8 Lite phone. :cyclops:
Write here any suggestion please:
Click to expand...
Click to collapse
A moment i'm try and say you.
What TWPR versión have you instaled?
The 3.0.2 it's for MM android and the 2.7.8 it's for android Lollipoo

damian12866 said:
Huawei P8 Lite Android 6.0 Marshmallow B564 Root
I want to create a topic about how to root new version of Android 6.0 B564 P8 Lite phone. :cyclops:
Write here any suggestion please:
Click to expand...
Click to collapse
:good::good::good::good:
Files:
1. BETA-SuperSU-v2.62: https://mega.nz/#!nJ9FXAjD!Jgelz-zLH...cNaPT-GD2ICsxA
2. BETA-SuperSU-v2.66: https://mega.nz/#!uNsxwIbB!AXQzZL67N...jATIYyvrYshTsQ
3. UPDATE-unSU: https://mega.nz/#!3ZMCBDpJ!Lj9Fc1YMI...46ZNE-esov2Rbg
Thanks John Miller for the files upload.
Process follow by me
1.- The C432B564 in the phone
2.- I flash the TWRP 3.0.2 ADB flasboot mode
2.- In the TWPR i install the SuperSu-v2.62
3.- I turn off the phone
4.- I turn on my phone in TWPR and i install SuperSu-v2.66
5.- I reboot the phone and here it is
Regards
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

lokopepe said:
:good::good::good::good:
Files:
1. BETA-SuperSU-v2.62: https://mega.nz/#!nJ9FXAjD!Jgelz-zLH...cNaPT-GD2ICsxA
2. BETA-SuperSU-v2.66: https://mega.nz/#!uNsxwIbB!AXQzZL67N...jATIYyvrYshTsQ
3. UPDATE-unSU: https://mega.nz/#!3ZMCBDpJ!Lj9Fc1YMI...46ZNE-esov2Rbg
Thanks John Miller for the files upload.
Process follow by me
1.- The C432B564 in the phone
2.- I flash the TWRP 3.0.2 ADB flasboot mode
2.- In the TWPR i install the SuperSu-v2.62
3.- I turn off the phone
4.- I turn on my phone in TWPR and i install SuperSu-v2.66
5.- I reboot the phone and here it is
Regards
View attachment 3767872 View attachment 3767873
View attachment 3767874
Click to expand...
Click to collapse
Thank you a lot dude! )))

lokopepe said:
:good::good::good::good:
Files:
1. BETA-SuperSU-v2.62: https://mega.nz/#!nJ9FXAjD!Jgelz-zLH...cNaPT-GD2ICsxA
2. BETA-SuperSU-v2.66: https://mega.nz/#!uNsxwIbB!AXQzZL67N...jATIYyvrYshTsQ
3. UPDATE-unSU: https://mega.nz/#!3ZMCBDpJ!Lj9Fc1YMI...46ZNE-esov2Rbg
Thanks John Miller for the files upload.
Process follow by me
1.- The C432B564 in the phone
2.- I flash the TWRP 3.0.2 ADB flasboot mode
2.- In the TWPR i install the SuperSu-v2.62
3.- I turn off the phone
4.- I turn on my phone in TWPR and i install SuperSu-v2.66
5.- I reboot the phone and here it is
Regards
View attachment 3767872 View attachment 3767873
View attachment 3767874
Click to expand...
Click to collapse
What is a purpose of that last file? Unroot?
And Thank you!

Bazilli said:
What is a purpose of that last file? Unroot?
And Thank you!
Click to expand...
Click to collapse
I think it's SuperSu Uninstaller

damian12866 said:
I think it's SuperSu Uninstaller
Click to expand...
Click to collapse
Yes

I did same as lokopepe but instead of outdated BETA-SuperSU-v2.66, i used newer v2.74-2-BETA-System-mode.zip from here http://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
I can confirm that it works also. Most important is to remember flash BETA-SuperSU-v2.62 first.

On twrp.me I find only the huawei P8, does it work for the p8 lite or I have to find a kirin variant? and what's the difference with a kirin ?

axel59123 said:
On twrp.me I find only the huawei P8, does it work for the p8 lite or I have to find a kirin variant? and what's the difference with a kirin ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/p8lite/general/twrp-3-0-0-0-p8-lite-kirin-t3343320
Here you have TWRP for our device.

where can I download TWRP 3.0.2 for P8 Lite?

ReneGee said:
where can I download TWRP 3.0.2 for P8 Lite?
Click to expand...
Click to collapse
https://mega.nz/#!2JYV1KjI!i4O0wIBHNrpCIA1v56Ot_sCBGB7tKkRyGyP-fCMabe0
There you go the 3.0.2 by peleato
Sent from my ALE-L21 using XDA-Developers mobile app

when i type adb reboot bootloader it shows phone offline any solution plz ?

TornadoMiMo said:
when i type adb reboot bootloader it shows phone offline any solution plz ?
Click to expand...
Click to collapse
Have you enabled usb debug in developer settings?

Thanks a ton, lokopepe and Bazilli. I can confirm following their instructions works flawlessly on B564. I have TWRP 3.0.2 and SuperSU 2.74 now, all working. You might get a bootloop after installing SuperSU v2.62, but don't worry about it and just install the next one. Should be fine then.
So, noob question time. Once a new system update appears, what would be the safest way to get it? I assume unroot and go back to stock recovery before receiving it?
Can I do full unroot from within SuperSU, or should I use the provided file? Also, how do I revert to stock recovery? I imagine it's a matter of extracting recovery.img from the full stock B564 ROM and flashing that onto the phone?

wdua said:
Thanks a ton, lokopepe and Bazilli. I can confirm following their instructions works flawlessly on B564. I have TWRP 3.0.2 and SuperSU 2.74 now, all working. You might get a bootloop after installing SuperSU v2.62, but don't worry about it and just install the next one. Should be fine then.
So, noob question time. Once a new system update appears, what would be the safest way to get it? I assume unroot and go back to stock recovery before receiving it?
Can I do full unroot from within SuperSU, or should I use the provided file? Also, how do I revert to stock recovery? I imagine it's a matter of extracting recovery.img from the full stock B564 ROM and flashing that onto the phone?
Click to expand...
Click to collapse
If the update is a full update package (about 1.4Gb) you don't need to go back to stock recovery to install it. You don't even need to un-root.
As it replaces all partitions with its own images in the full update, it doesn't matter. You only have to re-flash twrp and root afterwards.

Bazilli said:
I did same as lokopepe but instead of outdated BETA-SuperSU-v2.66, i used newer v2.74-2-BETA-System-mode.zip from here http://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
I can confirm that it works also. Most important is to remember flash BETA-SuperSU-v2.62 first.
Click to expand...
Click to collapse
its works bro..
thanxs in advance

Hi everyone,
Just to inform newbies like me, the combo to get into TWRP is :
- Volume (+)
- Volume (-)
- Power
all together at boot.
I'm on C4332B564 but cannot boot into TWRP after install.. how can I do ?
- I just unlocked the bootloader
- I flash twrp.img (3.0.2) via ADB : fastboot flash recovery twrp.img
- The phone stays in the white screen with "Phone unlocked"
- I reboot but the phone goes only in the EMUI eRecovery, not TWRP.
thanks a lot !
Click to expand...
Click to collapse

magicyoda said:
Hi everyone,
Just to inform newbies like me, the combo to get into TWRP is :
- Volume (+)
- Volume (-)
- Power
all together at boot.
Click to expand...
Click to collapse
I think you need to rename twrp.img to recovery.img, and than "fastboot flash recovery recovery.img"
After that you go into recovery by pressing volume up + power.

Hello,
Do we need to move eu.chainfire.supersu-1 folder from "/data/app" to "/system/app" to keep root?

Help please!!! Huawei honor 4x bricked

Hi Friends, Yesterday i rooted my Honor 4x ( che1-L04v100R001C900B180 ) and tried install TWRP recovery via flashify. after that phone is currently in boot loop and restarting again and again . I cannot go to the recovery, but have access to fastboot. But the bootloader is locked. I will be unbelievably grateful if anybody can help me.

Try "fastboot continue" in fastboot &rescue mode.
If still in bootloop Request bootloader unlock key from hihonor web chat by giving IMEI & SN. Inform about bootloop if they ask for product id.
After unlocking try flashing Recovery uploaded by Neeraj in https://forum.xda-developers.com/honor-4x/help/requesting-che1-l04-b180-kitkat-t3529941 by fastboot.

remember, for a bootloader locked device, you should not do anything like flashing twrp or rooting without unlocking bootloader.
but right now, you can do two things,
you can fast boot the official firmware..that is extract update.app, you will find the boot.img , system,img , data.img , and flash through fastboot one by one, but that's a bit risky
and you can do unlock the bootloader, flash twrp through fast boot (remember , not to do with flashify again) and flash any custom rom of your choice.
good luck

Official firmware
thilak devraj said:
remember, for a bootloader locked device, you should not do anything like flashing twrp or rooting without unlocking bootloader.
but right now, you can do two things,
you can fast boot the official firmware..that is extract update.app, you will find the boot.img , system,img , data.img , and flash through fastboot one by one, but that's a bit risky
and you can do unlock the bootloader, flash twrp through fast boot (remember , not to do with flashify again) and flash any custom rom of your choice.
good luck
Click to expand...
Click to collapse
Thanks for the advice. But i have look every where for the official firmware of Honor 4x ( che1-L04v100R001C900B180 ) but i cant find it ,does any one know where i can get it at?

AKHILRS said:
Thanks for the advice. But i have look every where for the official firmware of Honor 4x ( che1-L04v100R001C900B180 ) but i cant find it ,does any one know where i can get it at?
Click to expand...
Click to collapse
honor official website.. use google

FIRMWARE
thilak devraj said:
honor official website.. use google
Click to expand...
Click to collapse
Honor removed it from the website. there is no firmware available for my build number - che1-L04v100R001C900B180.

AKHILRS said:
Honor removed it from the website. there is no firmware available for my build number - che1-L04v100R001C900B180.
Click to expand...
Click to collapse
do not check for the entire build number.. just check for che1-L04, you will definitely find it

Stock firmware available for these build numbers .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Can i use che1-L04 firmware with different build number ?

AKHILRS said:
Can i use che1-L04 firmware with different build number ?
Click to expand...
Click to collapse
Yes. They should work. Before that flash the stock recovery through fast boot. Then place the dload folder with update.ap package in the root of the SD card . Power off the smartphone then press volume up+volume down+power down button simultaneously which will lead to the flashing to the ROM

https://forum.xda-developers.com/honor-4x/how-to/roll-to-emui-cm13-honor-4x-che1-l04-t3507998
If you have no other method, try using this, last hope.

jerryhou85 said:
https://forum.xda-developers.com/honor-4x/how-to/roll-to-emui-cm13-honor-4x-che1-l04-t3507998
If you have no other method, try using this, last hope.
Click to expand...
Click to collapse
IMHO, this won't work as the bootloader is not unlocked. All you can do is just flash the recovery AFAIK.
---------- Post added at 10:19 AM ---------- Previous post was at 10:15 AM ----------
Before you flash anything, take the backup of modemst1,modemst2 and fsg. They contain NV parameters, IMEI,MAC addresses for WiFi,BT and other stuffs

Embeddednut said:
IMHO, this won't work as the bootloader is not unlocked. All you can do is just flash the recovery AFAIK.
---------- Post added at 10:19 AM ---------- Previous post was at 10:15 AM ----------
Before you flash anything, take the backup of modemst1,modemst2 and fsg. They contain NV parameters, IMEI,MAC addresses for WiFi,BT and other stuffs
Click to expand...
Click to collapse
Correct, this won't work with locked bootloader..But since the phone is gone anyway...

AKHILRS said:
Honor removed it from the website. there is no firmware available for my build number - che1-L04v100R001C900B180.
Click to expand...
Click to collapse
(Che1-L04, Android 6.0, EMUI 4.1, C675B520, India) Download
1) Create a folder 'dload' in root directory of your sdcard, copy this firmware to this 'dload' folder.
2) Press Vol Up + Vol Down + Power button for 10-20 seconds, then release Power button but keep pressing Vol up + Vol Down.

Solved!!! I also face same issue.Try with EDL mode. Download corresponding firmware extract it. you see the dload folder copy the folder to sd card. power off mobile and press all the 3keys(power,Volume up,Volume down). It boot into Emergency downloadmode. Firmware link: http://www.stechguide.com/download-honor-4x-marshmallow-firmware/

Great that u solved it

Me too.
Sent from my Honor 8 using XDA Labs

Kang-Vip ROM [05-05-17] {+Fix)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Based on B140 of TL00/DL00 of Huawei P10+
Work on all Huawei P10 (any variant) and Huawei P10+ (any variant)
READ ALL POST FOR RESOLVE YOUR QUESTIONS.​
Requisites:
Bootloader unlocked
Have TWRP Recovery
Download the files
Charecterist:
Call Recorder.
Intelligent Assistant.
Smart-E.
Custom Launcher Design
Advanced Reboot Menu.
K Settings (for custom settings)
Root.
DPI.
Better Battery Life.
And more, more....
Images:
The images are from the original post, in chinese, but the ROM are in all languajes, and the KangVip Settings APP on English.
Notes:
The fix contain the boot pre-rooted for run on all Europe/USA variants, with functional camera, and delete all chinese app's (know bloatware) and install the 360.apk modified for launch KangSettings app without waste resources, add's GPlay Services and GPlay Sotore, fixed the AdBlocker and Recovery Flash with Recovery Flasher on Kang-Vip, this fix it's from me, i created the fix for my P10+, and work for other's P10/+
How-To install:
Download the files
Copy to external storage
Reboot on TWRP
Install the "ROM" file
Install "FIX" file
Reboot
*The first run its slow (aprox 10 minuts).
Downloads:
ROM: https://mega.nz/#!wZcGRaaQ!pv5GD3Y9o6FvlNNc5TKDt1Nqp_1BLzQrABhJqiiL7hU
Fix: https://mega.nz/#!QU1m1DjR!Szmu5t0Owr7LV9w9MO0bZvV43YKL5H0X4C2DXyt3b-A
Regards.

Thank you so much. Theme are bugs or problem?

420hazee said:
Thank you so much. Theme are bugs or problem?
Click to expand...
Click to collapse
no problem there.

Hay man thanks.
Looks great.

Excellent! Used these roms on my old P9.
Which root does it use? SuperSU or Phh's?

When i flash i get error. why?
---------- Post added at 04:13 PM ---------- Previous post was at 04:08 PM ----------
Failed to mount '/system' (invalid argument). i get this error why?

Looks like I will have to give this a try soon ! Would love to increase battery life

420hazee said:
When i flash i get error. why?
---------- Post added at 04:13 PM ---------- Previous post was at 04:08 PM ----------
Failed to mount '/system' (invalid argument). i get this error why?
Click to expand...
Click to collapse
You need to mount "system" at the TWRP before starting to flash.
The button "Mount" is in the main menu in TWRP.

bozikakis said:
You need to mount "system" at the TWRP before starting to flash.
The button "Mount" is in the main menu in TWRP.
Click to expand...
Click to collapse
Obviously i had do it, but i got this error. Never seen before. I can't understand why.

420hazee said:
Obviously i had do it, but i got this error. Never seen before. I can't understand why.
Click to expand...
Click to collapse
I have same error message.
It's solving the latest version of stock recovery flash and then follow the instructions flashing the b140.
Stock recovery b140 B113
Badwolfe add the stock recovery link. Ok

M.KK said:
I have same error message.
It's solving the latest version of stock recovery flash and then follow the instructions flashing the b140.
Stock recovery b140 B113
Badwolfe add the stock recovery link. Ok
Click to expand...
Click to collapse
Wait what i have to do? Install the stock recovery on twrp? And after stock the kangvip rom and fix?

420hazee said:
Wait what i have to do? Install the stock recovery on twrp? And after stock the kangvip rom and fix?
Click to expand...
Click to collapse
Huawei haa.
No I saying to you
1 flash stock recovery b140.
2 flash twrp.
3 flash rom and fix.
Ok

M.KK said:
Huawei haa.
No I saying to you
1 flash stock recovery b140.
2 flash twrp.
3 flash rom and fix.
Ok
Click to expand...
Click to collapse
I'm onVKY-l29C636B124 will it work?
where can i find the stock recovery b140?

420hazee said:
I'm onVKY-l29C636B124 will it work?
where can i find the stock recovery b140?
Click to expand...
Click to collapse
Badwolfe

M.KK said:
Badwolfe
Click to expand...
Click to collapse
Well, so i have to flash in twrp the stock recovery b140 and, after in the stock recovery b140 reflash the twrp and, after when i will flash the kangvip rom i will get no error?

420hazee said:
Well, so i have to flash in twrp the stock recovery b140 and, after in the stock recovery b140 reflash the twrp and, after when i will flash the kangvip rom i will get no error?
Click to expand...
Click to collapse
Yes
Stock recovery is a partion file and Huawei update the firmware the change the partion user build number is chang to b140 ok.
Twrp working with stock recovery.
Then you flash the twrp you have already stock recovery one side. Ok
And i think I guide to be a school child. Ok

M.KK said:
Yes
Stock recovery is a partion file and Huawei update the firmware the change the partion user build number is chang to b140 ok.
Twrp working with stock recovery.
Then you flash the twrp you have already stock recovery one side. Ok
And i think I guide to be a school child. Ok
Click to expand...
Click to collapse
I don't get it still error "can't mount system" Can you tell me about detail, please
my devices P10+ VKY-L29C636B133

BadWolfYe said:
Images:
The images are from the original post, in chinese, but the ROM are in all languajes, and the KangVip Settings APP on English.
Regards.
Click to expand...
Click to collapse
Bro, it there any chance to see the screenshots of your firmware in english?

Here is my B140 but i use different method from the OP i use VKY system flash directly from fastboot.
Sent from my VKY-L29 using Tapatalk

bozikakis said:
Bro, it there any chance to see the screenshots of your firmware in english?
Click to expand...
Click to collapse
It's fully English and rooted.
You can uninstall Chinese applicants.
And b happy all thing in there you can wont.
This is the good way to flashing the b140 only system can flash. Don't boot. Img

How to unroot and uninstall TWRP - Huawei P8 lite 2017 [PRA-LX1]

Hello everyone!
This is my first thread here at XDA and I hope you can help me fix a few things with my phone. Three days ago I purchased the Huawei P8 lite 2017 [PRA-LX1] PRA-LX1C02B142 and without knowing about all the problems other users are having with rooting this device, I did exactly that. I rooted my device and installed TWRP. As you can guess, I facing a few problems and a little bit of lagging. I want to fully restore my device. To restore the EMUI 5, unroot my device and, of course, lock the bootloader again.
Is that possible? To install the officical ROM and fully restore my device as it was when I brought it? If not, what's the best I can do? My device is fully working but I can't change themes, sometimes lags etc.
I'm a newbie, so any help will be much appreciated!

Get your latest firmware
Use the Huawei update extractor to extract the update.app
Extract
system.img
Boot.img
Recovery.img
And use fastboot to flash them...
and then do a factory reset from the stock recovery menu (optional but recommended)
Sent from my PRA-LA1 using Tapatalk

hamzio7 said:
Get your latest firmware
Use the Huawei update extractor to extract the update.app
Extract
system.img
Boot.img
Recovery.img
And use fastboot to flash them...
and then do a factory reset from the stock recovery menu (optional but recommended)
Sent from my PRA-LA1 using Tapatalk
Click to expand...
Click to collapse
I've download the Huawei Update Extractor and installed it on my PC. I extracted the update.app I found on a website and now I don't know in what order to extract the system.img, boot.img and recovery.img. Do I flash them one by one in an exact order?

meymigrou said:
I've download the Huawei Update Extractor and installed it on my PC. I extracted the update.app I found on a website and now I don't know in what order to extract the system.img, boot.img and recovery.img. Do I flash them one by one in an exact order?
Click to expand...
Click to collapse
Just flah them i don't think that the order changes anything​
Sent from my PRA-LA1 using Tapatalk

hamzio7 said:
Just flah them i don't think that the order changes anything​
Sent from my PRA-LA1 using Tapatalk
Click to expand...
Click to collapse
I've tried to flash the files into my device but they were corrupted. I am trying to find where to download the stock rom and I can't find it anywhere. Any ideas?

meymigrou said:
I've tried to flash the files into my device but they were corrupted. I am trying to find where to download the stock rom and I can't find it anywhere. Any ideas?
Click to expand...
Click to collapse
Here you can download full stock ROM that you need.. Download First one, FullOTA-MF, Extract and flash Boot.img, Recovery.img and System.img via fastboot. You can leave bootloader unlocked.

MobileTechArena said:
Here you can download full stock ROM that you need.. Download First one, FullOTA-MF, Extract and flash Boot.img, Recovery.img and System.img via fastboot. You can leave bootloader unlocked.
Click to expand...
Click to collapse
Thank you for your reply! I downloaded the FullOTA-MF file and extracted it. I tried to flash the files onto my device but I am getting this error: FAILED (remote: Command not allowed).
I've searched and they say that I have to enable the USB Debugging mode and the OEM Unlocking from the settings of my device. I have enabled the USB Debugging but I can't enable the OEM Unblocking as it stays grey and doesn't give me the option to enable it. What should I do?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

meymigrou said:
Thank you for your reply! I downloaded the FullOTA-MF file and extracted it. I tried to flash the files onto my device but I am getting this error: FAILED (remote: Command not allowed).
I've searched and they say that I have to enable the USB Debugging mode and the OEM Unlocking from the settings of my device. I have enabled the USB Debugging but I can't enable the OEM Unblocking as it stays grey and doesn't give me the option to enable it. What should I do?
Click to expand...
Click to collapse
Try to repeat unlocking bootloader in fastboot first - "fastboot oem unlock <Unlock Password>". Then power on device and enable that.
EDIT: But if your phone is in working condition maybe there's easier/safer way to remove root. As i had the same situation any my phone bricked after i flashed boot, recovery and system. It took me 3 days to restore it from bricking.

MobileTechArena said:
Try to repeat unlocking bootloader in fastboot first - "fastboot oem unlock <Unlock Password>". Then power on device and enable that.
EDIT: But if your phone is in working condition maybe there's easier/safer way to remove root. As i had the same situation any my phone bricked after i flashed boot, recovery and system. It took me 3 days to restore it from bricking.
Click to expand...
Click to collapse
My phone is in working condition but it's not just about the root. It's the whole firmware thing. After I rooted my device a lot changed. I just want to easily fully restore it back to normal.

MobileTechArena said:
Try to repeat unlocking bootloader in fastboot first - "fastboot oem unlock <Unlock Password>". Then power on device and enable that.
EDIT: But if your phone is in working condition maybe there's easier/safer way to remove root. As i had the same situation any my phone bricked after i flashed boot, recovery and system. It took me 3 days to restore it from bricking.
Click to expand...
Click to collapse
I've tried the "fastboot oem unlock" but it didn't work. It gives me the same error. Any other ideas?

meymigrou said:
I've tried the "fastboot oem unlock" but it didn't work. It gives me the same error. Any other ideas?
Click to expand...
Click to collapse
I had the same problem, That's FRP lock, when you go to bootloader what you see under FRP.
I used DC-Phoenix tool to flash those images (it's a paid tool, 15€ for 72h of work). It lets you flash images when FRP is locked.
.

MobileTechArena said:
I had the same problem, That's FRP lock, when you go to bootloader what you see under FRP.
I used DC-Phoenix tool to flash those images (it's a paid tool, 15€ for 72h of work). It lets you flash images when FRP is locked.
.
Click to expand...
Click to collapse
Yes! It says that the FRP is locked. Unfortunately I can't afford to purchase the tool as I am totally broke thanks to my brother's college expenses, is there any other tool that could do the same? Or any other way?

meymigrou said:
Yes! It says that the FRP is locked. Unfortunately I can't afford to purchase the tool as I am totally broke thanks to my brother's college expenses, is there any other tool that could do the same? Or any other way?
Click to expand...
Click to collapse
You can try REDLOTUS tool from P10 forum. Just follow instructions on Github, but i didn't test if it works in fastboot or just when phone is already working.

Hi guys, does anyone know if I do the erecovery this will unroot my phone as well?
thanks a lot

I had the same problem...all you have to do is relocking your bootloader...but first of all you need to have the stock recovery(very important).
If you don't have the stock recovery you can't relock your bootloader
If you have root permission you can flash stock recovery using dd command or flashify
So...this is how it goes...boot to the stock recovery
Do a factory reset
Go to bootloader and use fastboot for this command
Fastboot oem relock xxxxxxxxxxxxxxxx
X's are your bootloader unlock code
Then the phone will ask you to do a factory reset
Agree and boot...
Go to deveoper options and enable OEM unlocking
Re unlock your device.
Sent from my PRA-LA1 using Tapatalk

hamzio7 said:
I had the same problem...all you have to do is relocking your bootloader...but first of all you need to have the stock recovery(very important).
If you don't have the stock recovery you can't relock your bootloader
If you have root permission you can flash stock recovery using dd command or flashify
So...this is how it goes...boot to the stock recovery
Do a factory reset
Go to bootloader and use fastboot for this command
Fastboot oem relock xxxxxxxxxxxxxxxx
X's are your bootloader unlock code
Then the phone will ask you to do a factory reset
Agree and boot...
Go to deveoper options and enable OEM unlocking
Re unlock your device.
Sent from my PRA-LA1 using Tapatalk
Click to expand...
Click to collapse
What is your build my friend? I have PRA-LA1C185B212. can you send me link where i can download boot.img recovery.img and system.img with this build. Or do you have backup of your system. Can you please send it to me. I have a problem with my gapps and i want to revert it back to stock rom with that build rom. Thanks in advance.