Database Develop

Problems charging whith the iphone charger

Living in Sweden, I cant use the original charger (without an adapter), so I'm using the iphone charger to charge my Nexus S. The iphone charger is 5v 1A, vs 5v 750mA on the original charger. It works, but it takes forever and forever. around 14 hours from almost drained to +90%. If anything, shouldn't it go faster?
Something broken, or am I missing something?

Swede here...Buy a European micro USB adapter?

Long charge times have plagued the Galaxy S line of phones since the origina i9000; seems to have improved on the NS for me, but it doesn't charge nearly as fast as an iPhone (but iPhone has smaller battery).
Yes, I'd expect a 1 amp charger to go at least as fast.
I'm curious if your phone charges faster on the USB port of your computer than you're getting with that charger.
Are you sure there's nothing wrong with the charger or cord you're using?

As soon as I saw .75a on the provided samsung charger I chucked it back into the box and have been using the 1a charger from my HTC aria instead.....I still get pretty slow charge times compared to my N1 but nowhere near as slow as you are getting!! (14 hours) I too would be interested to know how well/poorly your NS charges through a pc usb or another charger, it sounds like you may even have a problem with your device :s
That samsung charger is just a POS all around IMHO tho....its ugly as sin (freaking huge) and only .75a?? cmaaaaannnnnnnnnnn, samsung!!!

I'm using the little iPhone USB charger as well and my phone still takes over 3 hours to charge. Charging time is horrendous.

My charging problems occur perhaps every tenth time I try to charge it... So something with the negotiation seems thinkable...

Couldn't this hurt the battery/internals?

Wireless charger and some questions.

http://www.amazon.com/gp/product/B00F6SPYJS/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I recently purchased this from Amazon. Not a bad buy for $22, but some quirks. I noticed that if you are going to charge with a case on, you need an optimal charger and cable. With anything less than that, the charger will repeatedly cycle on and off. With case off a 1amp charger will work, with case on you need a 2amp charger and good cable. Also, the sweet spot on the phone is somewhat small, so it needs to be positioned with some precision, can't just be dropped onto the charger.
Here's the one problem and I don't know if its the charger or G2. The phone charges fairly rapidly. So if I awaken in the middle of the night for some reason which I will not discuss here, the phone will be fully charged and the charging will shut down. However, over the rest of the night the charger doesn't turn on and the phone charge trickles down to something around 97%. Even if I take the phone off the charger, the charging won't immediately start up again. I haven't determined if there is a point at which wireless charging will be re-enabled but all works well when I replace it on the charger the following night.

This is the charger. I have a Samsung Qi S4 charger and it will continue to trickle charge throughout the night. When I pull mine off in the AM, it's at 100%.
The more expensive chargers have multiple coils in there to allow "drop and charge" and also have better charging programming to trickle charge.
The cheaper ones work well, but as you mentioned, are a little trickier to find the sweet spot and just turn off when reached 100%. The cheap ones are good for travel and office charging, but I'd buy a better one for bedtime charges.
http://www.amazon.com/Lerway-Wireless-Power-Charger-Lumia920/dp/B00E9MUNWU/ref=pd_sim_cps_32
These get good reviews and are cheaper. I don't own one to know how it operates, but reviews look good. Ebay also has one that I think is the same device for $10.
Here is my Samsung Qi Plate:
http://www.amazon.com/Wireless-Indu...TF8&qid=1387389091&sr=1-1&keywords=samsung+qi
I think the Samsung can be had for 50% off using coupon code: RV18623
You have to sign in with your Google ID or create an account. I just tried it and said 1 per account.
http://www.samsung.com/us/mobile/cell-phones-accessories/EP-P100IJWUST2

player911 said:
This is the charger. I have a Samsung Qi S4 charger and it will continue to trickle charge throughout the night. When I pull mine off in the AM, it's at 100%.
The more expensive chargers have multiple coils in there to allow "drop and charge" and also have better charging programming to trickle charge.
The cheaper ones work well, but as you mentioned, are a little trickier to find the sweet spot and just turn off when reached 100%. The cheap ones are good for travel and office charging, but I'd buy a better one for bedtime charges.
http://www.amazon.com/Lerway-Wireless-Power-Charger-Lumia920/dp/B00E9MUNWU/ref=pd_sim_cps_32
These get good reviews and are cheaper. I don't own one to know how it operates, but reviews look good. Ebay also has one that I think is the same device for $10.
Here is my Samsung Qi Plate:
http://www.amazon.com/Wireless-Indu...TF8&qid=1387389091&sr=1-1&keywords=samsung+qi
I think the Samsung can be had for 50% off using coupon code: RV18623
You have to sign in with your Google ID or create an account. I just tried it and said 1 per account.
http://www.samsung.com/us/mobile/cell-phones-accessories/EP-P100IJWUST2
Click to expand...
Click to collapse
Thanks. Yeah, I was thinking of doing that. Using the coil at my work desk and the more reliable plugin at bedtime. At least with a plug in and suboptimal cable, I'll get a slow charge warning but eventually completely charged in the AM.

You won't get the Slow Charge message at all using Qi. In fact I use a standard USB 5V wall plug that spits out 500mah. It complains just using the cable, but not the cable and Qi.
I recommend slow charging bedside anyway (either wired or Qi). You'll get a MUCH longer lasting battery that way. Fast Charging is also Fast Depleting.

[Q] Quick Charge 2.0

So yesterday I bought a 2.0 charger off of amazon with the choe brand name. According to the ad it works with nearly every android phone, including the HTC one m8. For the past year I have been using a charger from my last phone which was a crappy flip phone and thought nothing of it, but I am wondering does this charger truly work?? According to app "Ampere" it is much slower. Also, I've read reports about phones heating up and that's what mine did last night, is that normal? How long should it take for me to full charge my HTC one m8?

It will heat up, that is normal. It'll use most of its 2.4A between 20 and 70% and then slow down. Your total charge time shouldn't take more than 1 hour, and make sure you're using the supplied cable.

Thanks for the response! So if it doesn't charge 1 to 100 in 1 hour than is something wrong? Also will a charger like this have any effect on how long my battery lasts? My last charger for whatever reason was for my last flip phone believe it or not, I never bought a new one.

Black_magic100 said:
Thanks for the response! So if it doesn't charge 1 to 100 in 1 hour than is something wrong? Also will a charger like this have any effect on how long my battery lasts? My last charger for whatever reason was for my last flip phone believe it or not, I never bought a new one.
Click to expand...
Click to collapse
no I wouldn't say that.
my 2.0 QC will get it done in about 1-2 hours compared to the 3-5 or so it took with stock charger.

0-100% will take more than an hour. I've timed mine a few times from 0-100%, not using the phone at all and in airplane mode waking it up every 5 minutes to check percentage, volts, and charge rate using Gsam batt monitor.
Comparing the two chargers (OEM HTC QC 2.0, and original HTC charger- which I believe is QC 1.0) the QC 2.0 is definitely faster. Even though there is nothing on the phone telling you it is using the higher wattage charging mode, it is. So, 0 to 100% using HTC's QC2, usually takes around 1:20 minutes if I remember right. As in the other post, it starts out rather slow to around 20%, then kicks in to high gear until around 80%, then slows back down all the way to 100% so as to not overcharge the battery and harm it. It really is amazing the speed that it charges at. It does get rather warm, which is normal, but shouldn't hurt the phone.
Now, completely draining and recharging these batteries frequently is not good for them and will decrease the useful life sooner. Keeping it somewhere around 80 % is ideal but realistically not practical and the manufacturers know that. That's why they build in overcharge circuitry protection so leaving the charger on all the time "shouldn't" harm the battery. Draining it down to zero and doing a full recharge cycle on it frequently WILL decrease the lifespan. The batterie's useful life is basically determined by a finite number of charge cycles.
There's tons of info on charging and batteries out there if you are looking for more reading too.

Anyone heard of the brand Auzen? It's popping up alot on aliexpress and around asian market. Not too much reviews yet on that brand.

don't play with quick chargers .I bloated my m8 batt once trying it .it charge at 2.4a .our device max is 1.5a.
If you insist using it then don't full charge with it n monitor closely .

That's impressive, I use a QC2.0 car charger, I use a variety of wall chargers that run from 1.0A to 2.3A at 5V.
So far, my battery is still very happy.
Sounds like you got a cheap knock off charger or your battery/charging circuitry was damaged/faulty and/or your ROM/firmware weren't proper, for that kind of damage to occur.

I don't think Ampere works. I once did a test (last month) and had 6 different USB cables and I wanted to see which was the best, every time I used one I got a different reading, from 200 up to 1600. Even using my Anker Quick Charge 2.0 I only got 400 so it stated.

I have been using Aukey QuickCharge 2.0 and gives pretty decent charge times.

I have a QUICK Changer 2.0. works great.. have some tips...
You know there is some colors on cable conectors ends you have to choose the right one..
- If the cable is not a quality one can result to slow charging.
Black ----- 1.0. most in stock phones
White------ 2.0. the right for fast charging...
The time on reaching 100% on battery,well Quickly charger 2.0 will reach 80% on your battery fast and it will change the next 20% slower...
There is some app in playstore can help can see the amperage live in mA..
Connect your charger to get the battery charging current or disconnect it and get the negative discharging current... and you can see your battery charging current mA is constantly changing because even on charging phone still using current (negative discharging current) and this is always changing.
On my case I see higher mA reading only under really low battery...

I have a problem with my m8 and aukey 2.0 quick charger....
After firmware update to 6.12.xxx.xxx mm , the app ampere tell me max 1600ma before update its tell 2000ma .. Its a bug or a feature of the new firmware base...??? I have cyanogenmod 13

Im using the same aukey 2.0 quick charger. Works perfect.

M8 is 1.5a max .if you use 2.0a logically you're overcharging it. Just wait for it to get bloat n replace the whole bat. worth it ?

Hi, i just wanted to say something. After many bad chargers i bought, i found the Nillkin chargers (2Amps)and Nillkin cables (2.1Amp) the best and best quality. I am always testing with good Usb voltage tester and it can charge up to 1.5 amps max on M8 and on LG G3 1.8 Amps. As long as the charger is 5.0V, amps can variate and it doesnt hurt your battery, it just charges slower or faster. In my case its charging 1% per minute on both phones. It doesn't matter if the cable is black, white, green... cables must be thick, around 18AWG that support high ampers which mean faster charging. thin cables are sh!#. And for car i also found the Scosche dual charger great for every device with Nillkin 30cm cables and Kenu airframe holder.
You can use 2.4A chargers on M8 without problem as it will only receive 1.5amps.
GL

I'm using Anker PowerPort 1+. It's very good and you can use for iPhone iPad & almost Android devices.
I bought it here: http://www.amazon.com/Anker-Charger-PowerPort-Samsung-Wireless/dp/B014F3D8FQ

henryrk said:
M8 is 1.5a max .if you use 2.0a logically you're overcharging it.
Click to expand...
Click to collapse
That logic is incorrect. The phone will only draw as many amps as its rated for (1.5 amps) regardless of what the charger is rated to supply. Think of the charger amp rating as the "maximum it can supply" instead of "what it will always supply".

henryrk said:
M8 is 1.5a max .if you use 2.0a logically you're overcharging it. Just wait for it to get bloat n replace the whole bat. worth it ?
Click to expand...
Click to collapse
Ampere shows max charge rate for me at 2000ma. Where do you get the idea it will overcharge?

Droid Turbo Turbo Charge , Quick Charge 2.0 question

So few days ago got the phone , but always charged it through USB port. Now finally tried turbo charger and it definitely isn't "turbo". I know most of those Turbo claims what I saw were just selling strategy , but I'm pretty sure I'm not even getting 1% - 1 minute. Latest Marshmallow OTA.
So , on a relatively new battery , how fast does your phones charge ? You can write with phone turned off and on..
Also looking at the charger it says for output :
Standard output :5V =1.6A
Turbo output :9v=1.6A
Turbo2 output :12v = 1.2A
This deosn't make any sense to me, while raising volts may solve some power losses through cable , amps are what charges your phone faster or slower , and 1.6A , isn't really a big deal not to mention 1.2A. Reading somewhere that quick charge 2,0 supports up to 3amps draw..
I have One Plus one and it's original charger is 2.1A (quick charge 1.0 ) , with custom kernel bumped charging rate all the way up and good cable I'm seeing about 2Amps of charging in real life , or little more than 1% per minute . I was expecting motorola to charge faster or at least even , even though they are 3100 vs 3900mAh batteries.. Not to mention I can easily mod OnePlus One and get same SOT and battery overall as motorola's, while on motorola I'm stuck with stupid locked bootloader . Original idea was to sell OnePlus One because of Motorola, but I don't know now anymore..

The volts and amps listed on an electrical device are typically its max or rated output, NOT what it "always" delivers. That being said, most power supplies will deliver their rated voltage most of the time, but the current is determined by the charged device (through it's effective resistance)... so as long as you run below the rated current, you'd be fine.
Secondly, from what I'm reading, the OPO doesn't have quick-charge technology (ref: https://www.reddit.com/r/oneplus/co...lcomm_quickcharge_20/?st=ix64k1gy&sh=6d7492c9 ) so I'm not sure what you're talking about there. Again, the charger may say 2.1A, but that doesn't mean it's actually delivering that much all the time. I have a relatively old Kindle Fire with a 2.1A charger, but I know it doesn't charge very fast even with that device.
If you want to talk about Volts and Amps, you need to use actual volt/amp meters to see what you're getting.. Note, there is an app for Android (called Ampere) that claims to report amp-rates, but it also has a caveat saying that the current should not be taken as completely accurate, for various reasons.
Lastly, note that QC doesn't actually run when you are at higher charge levels... I think it's above 80% or something? After that level, it returns to "standard charging" mode for this "top-off" phase of the battery charge cycle. So, if you're seeing slow charge rates there, it's to be expected.

The Turbo has a relatively massive battery. Mine takes...somewhere upwards of 3ish hours on turbo charging to replenish.

1 hour 15 minutes
that's what it takes to go from 0 to 100% using Turbo Charger 2.0

Thank you all for answering, this is exactly why I started this thread. Already see here some interesting results!
schwinn8 said:
The volts and amps listed on an electrical device are typically its max or rated output, NOT what it "always" delivers. That being said, most power supplies will deliver their rated voltage most of the time, but the current is determined by the charged device (through it's effective resistance)... so as long as you run below the rated current, you'd be fine.
Secondly, from what I'm reading, the OPO doesn't have quick-charge technology (ref: https://www.reddit.com/r/oneplus/co...lcomm_quickcharge_20/?st=ix64k1gy&sh=6d7492c9 ) so I'm not sure what you're talking about there. Again, the charger may say 2.1A, but that doesn't mean it's actually delivering that much all the time. I have a relatively old Kindle Fire with a 2.1A charger, but I know it doesn't charge very fast even with that device.
If you want to talk about Volts and Amps, you need to use actual volt/amp meters to see what you're getting.. Note, there is an app for Android (called Ampere) that claims to report amp-rates, but it also has a caveat saying that the current should not be taken as completely accurate, for various reasons.
Lastly, note that QC doesn't actually run when you are at higher charge levels... I think it's above 80% or something? After that level, it returns to "standard charging" mode for this "top-off" phase of the battery charge cycle. So, if you're seeing slow charge rates there, it's to be expected.
Click to expand...
Click to collapse
Thanks! Actually, OnePlus ONE DOES have quick charge 1.0 which is 5v up to 2.1A. Snapdragon 801 supports quick charge 2.0 but OPO didn't implement it with phone. There are billions of topic on this at OPO forum and a lot of people done tests including myself. The problem with OPO is it's very sensitive on cable so it works best with OEM cable and it somehow recognizes it. There is app called OPO charging current so I monitored with it and synapse . Kernel setup hardware to be able to recive very max 2100mA no mather which cable. Stock ONEplus charger. Some cheap cables gave me from 300 - 600 mA max with screen on . I found at home some cable that looked cheap but said charge only, tried and it charged around 1600mA with screen on and around 1800 screen off. Later got Anker 21 AWG and results were even better , aroun 1800-1900mA screen on and close to maximum 2000mA screen off. Phone was charging 1% in less than a minute. Thought turbo can charge at same rate. After all , it's "boosted" lol.
I know it doesn't do quick charge after around 75% , I tried at 30%. Given all that , 1600mA which is maximum I see on the Motorola's charger is not something special if we disregard Voltage..
Einsteindks said:
The Turbo has a relatively massive battery. Mine takes...somewhere upwards of 3ish hours on turbo charging to replenish.
Click to expand...
Click to collapse
Sparksys said:
1 hour 15 minutes
that's what it takes to go from 0 to 100% using Turbo Charger 2.0
Click to expand...
Click to collapse
Again this is very interesting. Already here we see 2 totally different results with one being almost as double fast.. Sparksys , you are on stock charger and stock cable?
Because if you charge from 0-100 in 1h 15min, thats around 3.2Amps charging current , while our buddy Einsteindks here gets around 1.3Amps and max amp I see on "rola's charger is 1.6Amps. I'm confused now.
Also can somebody post picof stock droid turbo USB cable shipped in bundle? I think I don't have stock cable, it says right at the plug phone side "be hello". No other labels or anything..

EjđiSixo said:
Thank you all for answering, this is exactly why I started this thread. Already see here some interesting results!
Thanks! Actually, OnePlus ONE DOES have quick charge 1.0 which is 5v up to 2.1A. Snapdragon 801 supports quick charge 2.0 but OPO didn't implement it with phone. There are billions of topic on this at OPO forum and a lot of people done tests including myself. The problem with OPO is it's very sensitive on cable so it works best with OEM cable and it somehow recognizes it. There is app called OPO charging current so I monitored with it and synapse . Kernel setup hardware to be able to recive very max 2100mA no mather which cable. Stock ONEplus charger. Some cheap cables gave me from 300 - 600 mA max with screen on . I found at home some cable that looked cheap but said charge only, tried and it charged around 1600mA with screen on and around 1800 screen off. Later got Anker 21 AWG and results were even better , aroun 1800-1900mA screen on and close to maximum 2000mA screen off. Phone was charging 1% in less than a minute. Thought turbo can charge at same rate. After all , it's "boosted" lol.
I know it doesn't do quick charge after around 75% , I tried at 30%. Given all that , 1600mA which is maximum I see on the Motorola's charger is not something special if we disregard Voltage..
Again this is very interesting. Already here we see 2 totally different results with one being almost as double fast.. Sparksys , you are on stock charger and stock cable?
Because if you charge from 0-100 in 1h 15min, thats around 3.2Amps charging current , while our buddy Einsteindks here gets around 1.3Amps and max amp I see on "rola's charger is 1.6Amps. I'm confused now.
Also can somebody post picof stock droid turbo USB cable shipped in bundle? I think I don't have stock cable, it says right at the plug phone side "be hello". No other labels or anything..
Click to expand...
Click to collapse
I was guess-timating. Been a while since I've done the full recharge.

Einsteindks said:
I was guess-timating. Been a while since I've done the full recharge.
Click to expand...
Click to collapse
According to your guess-timate and max rated power I see on the charger, that seems about right and realistic guess BUT there also isn't anything TURBO about it. I'ts the average charging speed of every device today (1.5A) which doesn't have any kind of quick charge option. Even quick charge 1.0 is faster with 2.1A at 5v . Thats why I opened this topic, I'm confused.
Only voltage is higher on turbo charger than let's say my OPO charger but amps are lower and voltage doesn't have that much of an impact on charging speed, amps do!

When I have my Turbo in my truck at night, and running about a dozen things at once, in addition to all the background stuff, NO 'regular' charger can keep up with the power demand, and the battery undergoes a insanely slow discharge. By itself, the battery lasts 3 or 4 hours, tops. With the turbocharger, the battery charges at a modest rate, maybe 10% per 30 minutes...while under high demand.

Einsteindks said:
When I have my Turbo in my truck at night, and running about a dozen things at once, in addition to all the background stuff, NO 'regular' charger can keep up with the power demand, and the battery undergoes a insanely slow discharge. By itself, the battery lasts 3 or 4 hours, tops. With the turbocharger, the battery charges at a modest rate, maybe 10% per 30 minutes...while under high demand.
Click to expand...
Click to collapse
That seems ok.
I encourage others to post their charging times so we can compare!
Thanks

Since no other turbo users jumped in...
At the time of starting the topic I have disabled some Verizon's bloatware (completely stock, locked turbo). After reflashing completely stock FW , and with untouched software, droid really did charged turbo fast. More than 1% per minute and around 0-60% for 30min just as advertised for quick charge 2.0 . So if anyone was wondering, that should be benchmark.
On the other hand, phone is almost impossible to charge with any other type of "normal" charger..

My Turbo, running stock MM/root/Xposed with a large load of apps, will charge 20-30% per hour on a normal 1A charger, while lying on the desk with the screen off. It charges at a similar rate via Qi wireless charging. This is plenty for daily overnight charging. My usage habits are such that I usually have 20-40% battery left when I get home from work in the evening.
In a different usage case, when I play Ingress (a real battery eater, screen on + 3D animated graphics + GPS + data) the Qi charger in my car holds discharge to about 5-10% per hour.
I've never had a turbo charger to compare, but I've never found the normal charger or Qi charger to be significantly lacking.

Spott07 said:
My Turbo, running stock MM/root/Xposed with a large load of apps, will charge 20-30% per hour on a normal 1A charger, while lying on the desk with the screen off. It charges at a similar rate via Qi wireless charging. This is plenty for daily overnight charging. My usage habits are such that I usually have 20-40% battery left when I get home from work in the evening.
In a different usage case, when I play Ingress (a real battery eater, screen on + 3D animated graphics + GPS + data) the Qi charger in my car holds discharge to about 5-10% per hour.
I've never had a turbo charger to compare, but I've never found the normal charger or Qi charger to be significantly lacking.
Click to expand...
Click to collapse
Right, I've also used "normal" charger before. Now, I have all QuickCharge plug chargers -- but I still use Qi wireless charging every day, as does my wife.
I also plug in via USB port on my computer and it charges fine.

okay the way the turbo charging works is that it's like a tier system at very very low charge percentages it works the fastest and slows off after about 60 or 70 percent it just charges like a regular charger all the magic happens at the lower charges. another thing is that unless the cable you are using is total garbage it won't matter at all. it is all the phone and the ac adapter that do the work any variations in the cable will be negligible. I am monitoring my battery through the custom kernel (bhb27 and its app) and it says right now at 81% charge on a turbo charging that I am getting +1172.x mA if my battery was lower this value would be much much higher
lastly I recommend only using the turbo charger when you really need power quickly. if you are just plugging in your phone for the night it makes no sense and will actually be bad for your battery health. the faster it charges the more it heats up and heat is not good for the battery health when I plug my phone in at night I use a .5 amp charger and my phone says that it will need like 8 or 9 hours to charge (this may be exsessive but the quick chargers heat up my phone a lot I also use a 1 and 2 amp charger nearby

Charging speed

To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the Xiaomi Poco F2 Pro (Redmi K30 Pro) can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!

With the supplied charger and cable the charging time is very impressive ("Turbo Charge") with a normal QC3.0 charger charge time is still very good but comparable to most other QC3.0 devices.
Something to note is the device does get noticeably warm when using the supplied charger in the "Turbo Charge" mode.

Takes about an hour for me with included charger.

murakh said:
With the supplied charger and cable the charging time is very impressive ("Turbo Charge") with a normal QC3.0 charger charge time is still very good but comparable to most other QC3.0 devices.
Something to note is the device does get noticeably warm when using the supplied charger in the "Turbo Charge" mode.
Click to expand...
Click to collapse
yes i noticed it get warm to hot-ish
isn't that bad for the battery?
moreover i noticed that if you charge while turned off it does not get hot

itti_sam said:
yes i noticed it get warm to hot-ish
isn't that bad for the battery?
moreover i noticed that if you charge while turned off it does not get hot
Click to expand...
Click to collapse
That's normal because you're not using it, if using while charging it will be hot as your running apps, tasks etc... at the same time. This will increase the heat as sensors will be running also.

Has anyone tried to use other cables that has the same turbo charge effect like the included cable? The included cable is too short, usually I use 2 meters long cable.
I have tried the baseus 5A 40W cable but it only support quick charging and not turbo.

I've tested charging wattage using original 33W charger and original USB cable via specialized USB tester, and I noticed it provides only 25W (about 9.6V/2.65A). It shows "Turbo Charge" indeed, but it's still only 75% efficient. Anyone care to explain this? Is this normal? I've read that only Zoom edition can be charged at 33W, so I expected non-Zoom edition will charge at least with 30W. I tried two other USB cables, and still only 25W. Later today I will try to charge it with Blitzwolf 30W PD charger and see how it goes with that one...

I haven't really tested charge speeds. So far the battery life has been exceptional and the main reason I opted for this phone without the high res screen and refresh rate, as see battery as more essential. I would much prefer charging at a slow speed to preserve battery life. A good app for this is AccuBattery. It measures how many mAh's being charged and discharged after each charge and keeps a graph. It will estimate battery health also.

Yeah I know about AccuBattery, I've been using it in the past. But a real physical tester device is always more precise. I do sw/hw development for a living so I know for a fact. Indeed, battery life is very good because optimized MIUI and pretty big battery, but it would be even better if charging speed was also up to the specs. Meanwhile I've tested charging speed using Blitzwolf 30W PD2.0 charger (K30Pro should support PD3.0 and be backward compatible), and situation is even worse - only about 15-16W at QC3.0 I believe. So no Turbo Charge was initiated. I mean 25W with original charger is still good, but I expected advertised charging speed. I'll do more tests when I catch some time.

Thats normal, because it don't charge all the time with 30W. Compare it with WARP Charge 30T it is faster. OnePlus 8 got 30W and 4300 mAh, F2 Pro is faster with bigger bettery but it's almost the same.
How old is your Blitzwolf charger?

I know it shouldn't charge @30W above 80-90%, but sure it should at 20-ish where I'm at about now. It's also not even cool to the touch, so there's no apparent reason to slow it to 25W. My Blitzwolf charger is about a year old, but I only used it couple of times, so it should be as good as new.

itti_sam said:
yes i noticed it get warm to hot-ish
isn't that bad for the battery?
moreover i noticed that if you charge while turned off it does not get hot
Click to expand...
Click to collapse
Batteries don't like heat but it is actively monitored and it will slow down charging when it crosses temperature threshold.

That's why I mentioned my phone is not even cool to the touch (let alone hot), so my case is not temperature related. I'll try to charge it while turned off, though it was pretty much in idle doing nothing when I did the test, ie. not stressed at all by any factor. All in all, I mean if everyone else gets 25W out of original charger, I won't bother anymore. Also, if it charges from 10-90% in around 1 hour, I won't waste any more time on this either, since it's good enough for me. I was just curious why it charges at 25W, when 30W (and 33W for Zoom edition) was advertised. Altough it wouldn't be the first time something was advertised at launch, and not achievable in real-case scenario.

Burs said:
I'll try to charge it while turned off...
Click to expand...
Click to collapse
Fun fact: phone doesn't charge when powered off?! That's a first. Is it just me, or am I getting too old? For the whole time I'm talking about my Redmi, not to confuse it with Poco, if that matters at all. Maybe Poco works differently.

On my Huawei device you also can not turn off an charge but this starts with Android 10.

takes about 1 hour and 20 minutes for me, I think the high temperature here, summer season, is the reason for this slow charging speed.

From 20-100% in about an hour. Few minutes less actually. Battery is big, that's all ok.

F2 turn off and are dead with 0% (can't turn on). Timer 60 min. and after 60 min. I got 96% with original charger. The phone don't turn on, like it always do.
@Burs a friend told me "on my Anker charger I only can use PD over the third usb port, with the type c port it will charge over QC 3.0 and not over PD" maybe thats why you get ~16W?

When my Redmi was turned off completey, it was hooked up to my USB tester for about a minute. I doubt it would trigger after some minutes, and only then start charging. For the whole time it was connected, I was getting 5V / 0.015A readings on the display. That's pretty much USB tester drawing the power from the phone battery, not the charger! So that would mean charging was completely disabled making the phone behave as a power bank lol. Weird enough, right?
My Blitzwolf charger has only two ports. One PD2.0 (USB-C) and one QC3.0 (USB-A). I've tried three sets of USB cables (one even 5A) on both ports, and best I could get out of it was about 15W. I think I'll have to order another one with PD3.0 and Turbo Charge compatibility.

Heh I'm planning on just using my old 1A slow chargers because they're dotted around the house and work, will probably not even plug fast charger in. Magnetic cables are just so convenient.