Hello,
Today, I was cleaning the screen with my shirt and I noticed that the screen was exhibiting horizontal stripes. Could it be that p10 is sensitive to static electricity? Or my phone is defective?
Related
Hey guys, there seems to be something a little irregular with the screen. When I press on the screen anywhere, there is a spot on the screen that appears to be what looks like pressure being exerted on it. Just like how it looks when you press on the LCD screen of a laptop. This happens also when i press on the case at the top on the left side. The spot I am talking about is about 1 in down from the top of the screen and about 1.5cm to the right from the left of the screen. It is not easily seen unless the screen is displaying a very dark background.
There is a membrane over the surface of the screen that will flex as any pressure is applied to the touch screen, both by the pen and by the frame. If you look at it through polarized sunglasses you can see the effect of any pressure quite dramatically. Unless the screen is malfunctioning or there is color distortion, I don't see a problem.
liquidsilver said:
There is a membrane over the surface of the screen that will flex as any pressure is applied to the touch screen, both by the pen and by the frame. If you look at it through polarized sunglasses you can see the effect of any pressure quite dramatically. Unless the screen is malfunctioning or there is color distortion, I don't see a problem.
Click to expand...
Click to collapse
i dont think thats what hes talking about, he makes it sound like whne he touches the screen a "lcd ripple" appears somewhere else on the screen.
Mine does this when i slide hte keyboard, i can see one in the middle, it kinda worries me, especially since my last kaiser's screen broke and i didnt do anything, i just took it out of my pocket and it was like that.
So it's my second N6 and another problem. Firts they gave me replacement phone, because back cover became unglued and battery expanded. In this replacement, screen is not even. On white webpage right edge of the screen looks much colder, than the left edge. When on dark background, like grey right edge looks blueish and left edge looks normal. I took it on sevice and they told me this is on feature, not a defect or malfunction. Is there some program/kernel/anything, which can control screen edges seperately ? If I turn adaptive brightnes off and screen on brightnes on highest, the problem is much smaller.
In my first Nexus 6 I had screen that was more bright + yellowish at the bottom and darker + pinkish at top. Shop replaced my phone without complaints.
They sent mine to service, and they told that it's feature. Now they dont't answer my messages and I'm stuck with that defective unit.
Story: I have 2 horizontal stripes on my touchscreen, that do not react on touch. The Touchscreen service menu lets me "clean" the touchscreen to show exactly these 2 bars that cannot be touched/touch doesn't react. Hence I decided to change the display (LCD+digitizer, as separating them is to difficult for me)
Now: Phone disassembled to the point, where I can unplug the display on the back, remove it and plug the new one in. Working so far.
Then I try to glue the new display in (display glue tape applied) which means I have to bend the cable a bit to go under the display. Before I push it firmly on the glue I test it again: LCD not working anymore. I see vertical artefacts.
Basically: The boot screen shows the white "SONY" centred on black background. But there are also artefacts from the "SONY" to the top and bottom. Like lines of error pixels with random colors. Not completely solid but visibly exactly where the "SONY" is.
Those lines are not static. They appear where bright objects are and are always top to bottom. Start is similar to this (during run it is not as bad as in the video, for me it is mostly e.g. when the symbols from the launchbar (WIFI, GPS,...) or the battery is shown) https://www.youtube.com/watch?v=O2kBUXdGJtk
This happened to me twice now and I can't figure out, what I could have done wrong. Does anyone knows what happened here and how to avoid it?
Hi everyone, it's been ten days since I've had this phone after a few years with an S6. The problem is that I see a yellow shadow at the bottom of the screen, which is observed no matter what screen setting you set. Is very annoying because just when I open something with white background the shadow is noticeable at first sight and if you rotate it back vertically, the yellow tone disappears and gives the white tone that it is supposed to have. But not only that, if it slightly tilts, the shadow appears again and the yellow tint extends towards the top of the screen.
Is this a normal "problem" of IPS LCDs or is it just my phone (defective screen diffuser)?
Thank you.
Is anyone else experiencing light Bleed at the top middle of the screen when you unlock your phone? It doesn't matter what screen I'm on but whatever screen I open on, most of the time I have white light Bleed at the middle top of the screen that goes down about 1/8 if an inch.
Once o to to another screen, any screen it goes away.
TheFuzz said:
Is anyone else experiencing light Bleed at the top middle of the screen when you unlock your phone? It doesn't matter what screen I'm on but whatever screen I open on, most of the time I have white light Bleed at the middle top of the screen that goes down about 1/8 if an inch.
Once o to to another screen, any screen it goes away.
Click to expand...
Click to collapse
Motion sense glow.
https://cdn.mobilesyrup.com/wp-content/uploads/2019/10/pixel-4-review-motion-sense-glow-1024x768.jpg