I have a SM-G900V that was on a custom 4.4.4 ROM. I'm selling the phone and wanted to give a stock but updated phone to the guy.
I downloaded the latest for 6.0.1 for the Verzion G900V and flashed it in Odin. It got a write fail. I tried again and it went further but then got another write fail.
Now when I try to boot the phone it goes to Software update failed error. I can boot again by long holding the power button. The phone is still recognized in Odin.
The bootloader was unlocked
The emmc was 15.
The build number of the custom ROM was: Build: KTU84P- G900VRU1ANI2
I'll keep searching for a solution but the guy I'm selling the phone to is freaking out so any and all help would be much appreciated.
update
I tried flashing the same build as what was on the phone AN12 and it failed with an Auth fail error in Odin. I did some research and saw that could be a CSC problem. I tried using Kies because I read you can find the CSC code that way. I couldn't get Kies to 'talk' to the phone. It saw that a phone was connected but it wouldn't created the connection. I tried firmware recovery but I need the serial number and Samsung in its infinite wisdom doesn't put the serial number on the sticker inside the phone (at least it doesn't on US Verizon).
It's a phone from Verizon (originally bought on contract) in the US and I have been using US Verizon downloads from either updato or sammobile (for the 4.4.4)
I could realy use some help. I'd like not to bork the phone by just trying hail mary solutions.
Hey all. I decided to pick up a Note 8 Snapdragon variant LDU on eBay to see if I can get it to work on a stock rom. After researching through numerous posts on XDA and videos on YouTube, I took the plunge and decide to see for myself. I wanted to use a stock rom to get past the 70% battery cap on LDU's.
Some people claimed they were able to get it to run a stock rom and some failed. (Yes, this is a LDU. I bought it from a liquidator on eBay).
Here's exactly what I did (I've tried flashing many different roms, but to no avail).
1. Tried to enable OEM unlocking through developer options using date method = did not work.
2. Found me2151's thread on rooting Snapdragon variant of Note 8 = bootloop with QVPASS = 1 QVDONE = 1 prior to Samsung Note8 logo
3. Found a comment on me2151's thread saying they had the same bootloop... Solution was to check "phone bootloader update" (link here)
4. Tried above method in the comments and checked phone bootloader update = did not work, still on bootloop
5. Downloaded a stock rom for N950XU with Frija. ROM is N950USQS5CRL1, released 2018-12-27
6. Flashed the rom using ODIN v3.13.1_3B patched = did not work, "Security Error: This phone has been flashed with unauthorized software & is locked. Call your mobile operator for additional support. Please note that repair/return for this issue may have additional cost."
7. I'm still able to go into download mode despite that error, but I have no idea what to flash now...
Any help is appreciated! Just want to get it to boot to Android, don't even care if it's the retail rom.
Hey ,I have the same issue, also bought the phone from a liquidator last week, Did you find any workaround?
azrael235 said:
Hey ,I have the same issue, also bought the phone from a liquidator last week, Did you find any workaround?
Click to expand...
Click to collapse
We might have bought it from the same place then.
Which bootloader version is your phone on? If you didn't flash a newer ROM and is still on bootloader rev 1, then you may be able to fix it.
hi, i was able to remove modem fail error by flashing a modified version of cp file
Hi guys,
I have a question about obtaining Android 10 AT&T firmware for the SM-960U. I'm currently having an issue where I bought the Samsung Galaxy Note 9 N960U1 factory unlocked from Samsung themselves. My current carrier is AT&T. However, I've realized for a while that my area doesn't have a good signal (1 bar to no service) due to the location where I am. I am trying to install AT&T's firmware with the boot logo and its software's bloatware to obtain Wi-Fi calling. However, I am having trouble. Currently, I've flashed my N960U1 with AT&T's U1 Android 10 firmware from the site using Odin. I see that it's been flashed successfully after doing a clean install and see AT&T firmware in the phone. However, it did not give me an AT&T boot logo screen or give me the Wi-Fi calling option. This is carrier unbranded. It's still the same like it's from the factory unlock no carrier firmware. So, after doing some research, I see that what I have to do is: clean flash AT&T's U1 firmware on the device (which I did), then, finally, install the U firmware to bring on the AT&T boot logo screen and WiFi calling. However, I am unable to do the 2nd part, because the only available firmware for U firmware (AT&T's bloatware) is Android 8. Due to the bootloader being version 4 in Android 10 and version 2 in android 8, I cannot downgrade even on a cracked Odin version. The phone gives me a SW REV error and odin gives me a write error. I worked on this for 8 hours, don't try to fight me on this lol. This is because Odin understands that the phone can't be downgraded due to the bootloader version being higher. This can be seen in the firmware names when comparing (Android 8: N960USQU1ARG6. Android 10: N960U1UES4DTD1).
In summary, I need to find the SM-960U AT&T carrier-branded Android 10 firmware. Right now, on Sam Mobile for N960U, the only firmware that comes up is Android 8. Downloading the latest firmware for the SM-N960U1 on Sam Mobile doesn't help me obtain wifi calling and the AT&T boot logo. Any suggestions? I really need help and appreciate it if you guys could help me. I can't find AT&T's U anywhere. Thanks!
You can flash any U firmware they are the same. As long as you have At&t sim it will provision to your sim. Since you are U1 you will need to do factory reset before flashing with Odin. You can use USC..Tmobile..Verizon. Dont use User data when flashing just use BL..AP..CP..CSC. At&t doesnt post their locked firmware for whatever reason.
Sent from my SM-N960U using Tapatalk
butchieboy said:
You can flash any U firmware they are the same. As long as you have At&t sim it will provision to your sim. Since you are U1 you will need to do factory reset before flashing with Odin. You can use USC..Tmobile..Verizon. Dont use User data when flashing just use BL..AP..CP..CSC. At&t doesnt post their locked firmware for whatever reason.
Sent from my SM-N960U using Tapatalk
Click to expand...
Click to collapse
Awesome. I’m going to try this tomorrow. I’ll update this post with the results! Thanks for the help.
butchieboy said:
You can flash any U firmware they are the same. As long as you have At&t sim it will provision to your sim. Since you are U1 you will need to do factory reset before flashing with Odin. You can use USC..Tmobile..Verizon. Dont use User data when flashing just use BL..AP..CP..CSC. At&t doesnt post their locked firmware for whatever reason.
Sent from my SM-N960U using Tapatalk
Click to expand...
Click to collapse
Hi guys! After 18 straight hours of fiddling and researching, not getting a definite answer from XDA and Sammobile forums since my phone was on the latest bootloader v4: I've finally been able to find out how to do this, thanks to butchieboy and a culmination other forums, I've finally been able to successfully figure this out!
Basically, here are the steps to successfully do it if you're on Android 10/bootloader v4 and want to make the switch without downgrading the software on a lower bootloader. Make sure you do a clean reinstall beforehand. Everything should be off the phone.
1. Download and flash U1 firmware from samfw as a clean install. I used ATT's U1 firmware (follow the instructions below to do so). I did this first and was confused about why I didn't get the bloatware after. However, this is only the first step.
2. I found the latest firmware from Verizon for the SM-960U (not U1), and downloaded patched Odin 3.13.1b onto my computer. I downloaded these both from samfw's website. You'll need the patched version to be able to switch from U1 to U firmware. I used Verizon's instead of T-Mobile's because they had posted the latest version for Android 10.
3. Run Odin as admin, make sure you're using a computer with open USB ports for data transfer (one of my computers gave me an error, switched to another one, it worked fine). Make sure you use a good data transfer cable also.
4. Enable USB debugging on the device, and reboot the phone into recovery mode. Don't connect it to the computer yet. Do not remove the SIM card during any part of this process. Leave it inserted the entire time.
4. Load up BL..AP..CP..CSC as butchieboy states. Do not use home_csc and do not use userdata. They are not needed. CSC needs to be used because it has to be a clean install in order for this to work properly. By not using userdata, the device will load up the appropriate carrier bloatware automatically using the SIM card provided!
5. Go ahead and connect the phone via a data transfer cable. You will see a serial COM port labeled in blue connected on top. Now flash Verizon's U firmware
6. The phone should successfully flash via Odin, and it will reboot
7. I had gotten into this weird recovery state at first when it rebooted. I forgot the error name on the bottom and was confused at first it was SW REV or something I think. However, I think the reason for this is because the phone doesn't know which carrier setting to apply just yet. There were options to reboot, update from SD card, and more.
8. Select "reboot" using the power button!
9. You'll see the AT&T logo as the phone reboots! Not sure why my phone didn't end up erasing, it just apparently did an update.
The first thing I see after the apps loaded was... the WiFi calling setup screen... Victory! Thanks to everybody who posted on online forums. And thanks to butchieboy for the straightforward answer. I hope this helps anybody online looking to do the same thing whether it's their Note 9 or any other device. Good luck!
robertj51 said:
Hi guys! After 18 straight hours of fiddling and researching, not getting a definite answer from XDA and Sammobile forums since my phone was on the latest bootloader v4: I've finally been able to find out how to do this, thanks to butchieboy and a culmination other forums, I've finally been able to successfully figure this out!
Basically, here are the steps to successfully do it if you're on Android 10/bootloader v4 and want to make the switch without downgrading the software on a lower bootloader:
1. Download and flash U1 firmware from samfw as a clean install. I used ATT's U1 firmware (follow the instructions below to do so). I did this first and was confused about why I didn't get the bloatware after. However, this is only the first step.
2. I found the latest firmware from Verizon for the SM-960U (not U1), and downloaded patched Odin 3.13.1b onto my computer. I downloaded these both from samfw's website. You'll need the patched version to be able to switch from U1 to U firmware. I used Verizon's instead of T-Mobile's because they had posted the latest version for Android 10.
3. Run Odin as admin, make sure you're using a computer with open USB ports for data transfer (one of my computers gave me an error, switched to another one, it worked fine). Make sure you use a good data transfer port also.
4. Enable USB debugging on the device, and reboot the phone into recovery mode. Don't connect it to the computer yet.
4. Load up BL..AP..CP..CSC as butchieboy states. Do not use home_csc and do not use userdata. They are not needed. CSC needs to be used because it has to be a clean install in order for this to work properly. By not using userdata, the device will load up the appropriate carrier bloatware automatically using the SIM card provided!
5. Go ahead and connect the phone via a data transfer cable. You will see a serial COM port in blue connected on top. Now flash Verizon's U firmware
6. The phone should successfully flash via Odin, and it will reboot
7. I had gotten into this weird recovery state at first when it rebooted. I forgot the error name on the bottom and was confused at first it was SW REV or something I think. However, I think the reason for this is because the phone doesn't know which carrier setting to apply just yet. There were options to reboot, update from SD card, and more.
8. Select "reboot" using the power button!
9. You'll see the AT&T logo as the phone reboots! Not sure why my phone didn't end up erasing, it just updated.
The first thing I see after the apps loaded was... the WiFi calling setup screen... Victory! Thanks to everybody who posted on online forums. And thanks to butchieboy for the straightforward answer. I hope this helps anybody online looking to do the same thing whether it's their Note 9 or any other device. Good luck!
Click to expand...
Click to collapse
I am really glad I found your post and I'm going to attempt this same procedure today. Quick question, does it matter if / when your SIM is inserted into the phone? Just wondering if I need to leave it in or out during this process or whether that will even have an affect? Is your Wi-Fi calling still working currently, btw?
Carl_Sagan_Cosmos said:
I am really glad I found your post and I'm going to attempt this same procedure today. Quick question, does it matter if / when your SIM is inserted into the phone? Just wondering if I need to leave it in or out during this process or whether that will even have an affect? Is your Wi-Fi calling still working currently, btw?
Click to expand...
Click to collapse
Hey Carl! Sorry for the late response. I'm glad you found my post as well!
I apologize for this, I should've mentioned this in my original post: please leave the AT&T SIM card inserted in the device the entire time during this process! When the phone reboots after Odin flashes, the first thing it searches for is what SIM is inserted so it can flash the appropriate carrier setting. Do not remove the SIM during any part of the process from start to finish.
Secondly, yes! The WiFi calling feature is working great on the phone. I'm glad after two years of having the phone I was able to get the feature this month. Good luck. Please let me know if you were successful in flashing the firmware, I'd really like to hear your results! My notifications are turned back on for this thread.
robertj51 said:
Hi guys! After 18 straight hours of fiddling and researching, not getting a definite answer from XDA and Sammobile forums since my phone was on the latest bootloader v4: I've finally been able to find out how to do this, thanks to butchieboy and a culmination other forums, I've finally been able to successfully figure this out!
Basically, here are the steps to successfully do it if you're on Android 10/bootloader v4 and want to make the switch without downgrading the software on a lower bootloader. Make sure you do a clean reinstall beforehand. Everything should be off the phone.
1. Download and flash U1 firmware from samfw as a clean install. I used ATT's U1 firmware (follow the instructions below to do so). I did this first and was confused about why I didn't get the bloatware after. However, this is only the first step.
2. I found the latest firmware from Verizon for the SM-960U (not U1), and downloaded patched Odin 3.13.1b onto my computer. I downloaded these both from samfw's website. You'll need the patched version to be able to switch from U1 to U firmware. I used Verizon's instead of T-Mobile's because they had posted the latest version for Android 10.
3. Run Odin as admin, make sure you're using a computer with open USB ports for data transfer (one of my computers gave me an error, switched to another one, it worked fine). Make sure you use a good data transfer cable also.
4. Enable USB debugging on the device, and reboot the phone into recovery mode. Don't connect it to the computer yet. Do not remove the SIM card during any part of this process. Leave it inserted the entire time.
4. Load up BL..AP..CP..CSC as butchieboy states. Do not use home_csc and do not use userdata. They are not needed. CSC needs to be used because it has to be a clean install in order for this to work properly. By not using userdata, the device will load up the appropriate carrier bloatware automatically using the SIM card provided!
5. Go ahead and connect the phone via a data transfer cable. You will see a serial COM port labeled in blue connected on top. Now flash Verizon's U firmware
6. The phone should successfully flash via Odin, and it will reboot
7. I had gotten into this weird recovery state at first when it rebooted. I forgot the error name on the bottom and was confused at first it was SW REV or something I think. However, I think the reason for this is because the phone doesn't know which carrier setting to apply just yet. There were options to reboot, update from SD card, and more.
8. Select "reboot" using the power button!
9. You'll see the AT&T logo as the phone reboots! Not sure why my phone didn't end up erasing, it just apparently did an update.
The first thing I see after the apps loaded was... the WiFi calling setup screen... Victory! Thanks to everybody who posted on online forums. And thanks to butchieboy for the straightforward answer. I hope this helps anybody online looking to do the same thing whether it's their Note 9 or any other device. Good luck!
Click to expand...
Click to collapse
What to do if i don't have at&t sim card, not even usa sim card, i'm in egypt and brought my n960u from usa, i installed u1 firm but realized that no wifi calling or volte so tried to install tmobile carrier firm and nothing appeared then tried at&t and also nothing appeared, neither the options nor the boot logo for tmobile or at&t.
what to do please help!
Thanks in advance
abulnass said:
What to do if i don't have at&t sim card, not even usa sim card, i'm in egypt and brought my n960u from usa, i installed u1 firm but realized that no wifi calling or volte so tried to install tmobile carrier firm and nothing appeared then tried at&t and also nothing appeared, neither the options nor the boot logo for tmobile or at&t.
what to do please help!
Thanks in advance
Click to expand...
Click to collapse
If you are trying to flash T-Mobile or AT&T bloat ware without a carrier SIM card, it will not work.
Hi. What if I have an AT&T sim card, but I'm also outside US. Not sure if the sim card is active or not.
My biggest worry was, I just had my phone factory unlocked so I can use a local sim card here in the country.
Will this work? And if it will, will my phone go back to being locked by AT&T?
Hi, I tried this process the way you have it listed and it is not working. I keep getting a device info error in Odin. Tried the newest firmware and an older version
robertj51 said:
Hi guys! After 18 straight hours of fiddling and researching, not getting a definite answer from XDA and Sammobile forums since my phone was on the latest bootloader v4: I've finally been able to find out how to do this, thanks to butchieboy and a culmination other forums, I've finally been able to successfully figure this out!
Basically, here are the steps to successfully do it if you're on Android 10/bootloader v4 and want to make the switch without downgrading the software on a lower bootloader. Make sure you do a clean reinstall beforehand. Everything should be off the phone.
1. Download and flash U1 firmware from samfw as a clean install. I used ATT's U1 firmware (follow the instructions below to do so). I did this first and was confused about why I didn't get the bloatware after. However, this is only the first step.
2. I found the latest firmware from Verizon for the SM-960U (not U1), and downloaded patched Odin 3.13.1b onto my computer. I downloaded these both from samfw's website. You'll need the patched version to be able to switch from U1 to U firmware. I used Verizon's instead of T-Mobile's because they had posted the latest version for Android 10.
3. Run Odin as admin, make sure you're using a computer with open USB ports for data transfer (one of my computers gave me an error, switched to another one, it worked fine). Make sure you use a good data transfer cable also.
4. Enable USB debugging on the device, and reboot the phone into recovery mode. Don't connect it to the computer yet. Do not remove the SIM card during any part of this process. Leave it inserted the entire time.
4. Load up BL..AP..CP..CSC as butchieboy states. Do not use home_csc and do not use userdata. They are not needed. CSC needs to be used because it has to be a clean install in order for this to work properly. By not using userdata, the device will load up the appropriate carrier bloatware automatically using the SIM card provided!
5. Go ahead and connect the phone via a data transfer cable. You will see a serial COM port labeled in blue connected on top. Now flash Verizon's U firmware
6. The phone should successfully flash via Odin, and it will reboot
7. I had gotten into this weird recovery state at first when it rebooted. I forgot the error name on the bottom and was confused at first it was SW REV or something I think. However, I think the reason for this is because the phone doesn't know which carrier setting to apply just yet. There were options to reboot, update from SD card, and more.
8. Select "reboot" using the power button!
9. You'll see the AT&T logo as the phone reboots! Not sure why my phone didn't end up erasing, it just apparently did an update.
The first thing I see after the apps loaded was... the WiFi calling setup screen... Victory! Thanks to everybody who posted on online forums. And thanks to butchieboy for the straightforward answer. I hope this helps anybody online looking to do the same thing whether it's their Note 9 or any other device. Good luck!
Click to expand...
Click to collapse
right at the beginning using odin it threw me an error, but it's probably because I used CSC home ...? How can I verify on Samsung Note 9 if I have an unlocked bootloader ..?
Edit: He used CSC not CSC home and an older version of odin. And I have a sim from Europe and it works great.
I need help, i have a sm n960u factory unlocked at&t branded using straight talk at&t sim. I have no volte or wifi calling settings. With special code they are greyed out and provisioned. Is there any way i can fix this issue?
Hello all.
My S20FE (SM-G780F) has not updated from OneUi 3 and Android 11. It always says that I'm using the latest software. I've tried factory resetting the phone and using Smart Switch to no avail.
I'm in the UK. Never lived anywhere else. I reside here permanently. It's where I bought my phone brand new.
I checked the service provider software version and it says ZT0/ZTO,ZTO/EUX . However, when I use the dialler method to check the same information it says the CSC is BTL3.
I researched and ZTO seems to refer to Brazil. I've never been to Brazil or anywhere in that vicinity so I don't know why it says ZTO as the service provider information.
Could this be why I'm having issues updating? If the phone thinks it's Brazilian then it would stop me updating if I'm in the UK? Is that correct?
Samsung suggested I send it to them to flash the drive but they require a proof of purchase and as I bought the phone over 2 years ago I can't for the life of me find the original order email.
Just for clarification the phone has never been rooted or modded and all software etc is "official." I've looked into flashing the software with Odin. Would I need ro download the update file for the CSC my phone says it is or for the CSC it should be? Do I only download the latest update or would I have to stack them and download all the previous ones my phone missed too?
Please help before I tear my hair out.
flashing the phone yourself with Odin is very easy, there are dozens of YouTube vids to get an idea from. actually downloading the firmware is more difficult.
whoever sold you the phone is who you should be angry at, it obviously wasn't intended for use here. let me know if you want help flashing!
Same thing happened to my Mom's phone (a Galaxy A series device).
Use this guide and manually flash the latest firmware.