Hello.
I am having a problem with my Mi5. any pc detect my device, it only will charge. I tried with 4 different cables and it didn't work either. I already try to make a factory reset but it didn't work. I think I really tried all that was possible to fix the issue but nothing works. If someone can give me an advice or a solution I would be really happy.
sorry, my english is not good
Thank you
iruxx said:
Hello.
I am having a problem with my Mi5. any pc detect my device, it only will charge. I tried with 4 different cables and it didn't work either. I already try to make a factory reset but it didn't work. I think I really tried all that was possible to fix the issue but nothing works. If someone can give me an advice or a solution I would be really happy.
sorry, my english is not good
Thank you
Click to expand...
Click to collapse
When usb connected you should have the choice to only charge it or use it as mtp. Do you have a notification when your phone is connected to your pc? If so click on it and differents options should appear. I had the same issue with my phone and the solution was to connect it on the motherboard (usb port behind the pc) when i connected it on the front port it wouldn't detect it as mtp device
mysa50 said:
When usb connected you should have the choice to only charge it or use it as mtp. Do you have a notification when your phone is connected to your pc? If so click on it and differents options should appear. I had the same issue with my phone and the solution was to connect it on the motherboard (usb port behind the pc) when i connected it on the front port it wouldn't detect it as mtp device
Click to expand...
Click to collapse
no, that is the problem, i don't have the notification, it only gives me the message that my phone is charging. I tried to change it in the developer tools under network options but it didn't work. It stay with the charging option.
iruxx said:
no, that is the problem, i don't have the notification, it only gives me the message that my phone is charging. I tried to change it in the developer tools under network options but it didn't work. It stay with the charging option.
Click to expand...
Click to collapse
Nothing in settings>storage? Did you try to connect it on the back of your pc?
mysa50 said:
Nothing in settings>storage? Did you try to connect it on the back of your pc?
Click to expand...
Click to collapse
yes :crying:
iruxx said:
yes :crying:
Click to expand...
Click to collapse
Which version of Windows are you using?
Did you try to download xiaomi drivers from official web site? And with mi pc suite ?
Where Can I download xiaomi drivers "official"?
Wysłane z mojego MI 5 przy użyciu Tapatalka
https://www.xiaomigeek.com/download-xiaomi-usb-driver-windows.html try this. Or maybe with adb drivers you Can find them on xda
Related
Hi everybody,
I installed the drivers manually but still I get the pop up of "USB Device not recognized".
I installed the drivers named as "LGUnitedMobileDriver_S498CA21_WHQL_ML_Ver_2.1".
Help please...
Change USB port? Do not connect to fron panel USB's?
hikmetataman said:
Hi everybody,
I installed the drivers manually but still I get the pop up of "USB Device not recognized".
I installed the drivers named as "LGUnitedMobileDriver_S498CA21_WHQL_ML_Ver_2.1".
Click to expand...
Click to collapse
You aren't mention what version of MS Wind0w$ you're using, and what ROM you used on your phone.
mgregor said:
Change USB port? Do not connect to fron panel USB's?
Click to expand...
Click to collapse
And same as mgregor, don't use front panel to connect USB.
Used drivers must be obsolete. Use 3.2.1 or 3.5 and be sure android platform modem is activated to be recognized by b2c
Try LG United Mobile Driver, there is a link on knzo's CWM recovery thread. And yes try a direct port on motherboard behind your cpu case.
Also try another usb cable.
Sent from my Optimus Black using Tapatalk
at this problem.... in my opinion is to check your usb cable or the usb port of your mobile...
if you cannot open the mobile,you can go to a mobile technician and tell him to resolder the usb port of your LG optimus....
My pc is a notebook.
Firstly thanks a lot.
mgregor said:
Change USB port? Do not connect to fron panel USB's?
Click to expand...
Click to collapse
I use notebook. I tried changing ports.
redy2006 said:
You aren't mention what version of MS Wind0w$ you're using, and what ROM you used on your phone.
And same as mgregor, don't use front panel to connect USB.
Click to expand...
Click to collapse
I use 32bit XP, I have a stock rom v10a.
Ilko said:
Used drivers must be obsolete. Use 3.2.1 or 3.5 and be sure android platform modem is activated to be recognized by b2c
Click to expand...
Click to collapse
I use 3.2.1 version of drivers. LG PC Suite IV or B2C can't recognize my phone.
lesp4ul said:
Try LG United Mobile Driver, there is a link on knzo's CWM recovery thread. And yes try a direct port on motherboard behind your cpu case.
Also try another usb cable.
Sent from my Optimus Black using Tapatalk
Click to expand...
Click to collapse
I tried a new usb cable but did not work.
juvanni said:
at this problem.... in my opinion is to check your usb cable or the usb port of your mobile...
if you cannot open the mobile,you can go to a mobile technician and tell him to resolder the usb port of your LG optimus....
Click to expand...
Click to collapse
It seems a bit risky my friend... I don't know what to do. Can I root my device without connecting to pc?? I want nova. Previously I rooted my wildfire with CM7. It was very different!
Be sure platform modem is activated in peripherals manager. This is what makes the phone being recognized by pc suite and b2c
Ilko said:
Be sure platform modem is activated in peripherals manager. This is what makes the phone being recognized by pc suite and b2c
Click to expand...
Click to collapse
It is activated but when I try to update driver it can not find any. Which driver should I use at that point? Maybe there is a problem in the connection point on the phone?? I am not use about taking my optimus to a mechanic.
Do you have another computer to test? Perhaps the problem was related to your Wind0w$ system...
hikmetataman said:
Can I root my device without connecting to pc??
Click to expand...
Click to collapse
Use WiFi, open forum and search GingerBreak, download and install it.
If your ROM are V10A, then it should work..
CMIIW.
redy2006 said:
Do you have another computer to test? Perhaps the problem was related to your Wind0w$ system...
Use WiFi, open forum and search GingerBreak, download and install it.
If your ROM are V10A, then it should work..
CMIIW.
Click to expand...
Click to collapse
I tried to connect my phone to an other XP result is the same "USB device not recognized". I tried Windows 7, Windows 7 did not even pop-up! Nothing happened! Only my phone was charging.
I am looking for gingerbreak but this problem is very annoying for transfering files. Each time I have to remove the SD card... Or myphoneexplorer(connected by wireless)...
Any advice?
Hi guys,
I finally managed to connect my phone to my pc. The problem was about the cables that I tried. Another original lg cable solved my problem.
But now I have an other problem. The brightness of my screen. It is usually at the minimum brightness and I can't change it. It does not change anything when I change the brightness settings. I tried other firmwares from http://luivit.altervista.org/firmwareP970/index.php but did not work still the same!
Help please...
Hi everyone, I need some help because I have a problem with my xperia Z1... My device doesn't want to connect to my computer through the USB cable... I've tried everything I knew, I've unchecked and rechecked USB debugging, I've tried to reflash the rom, I've tried reboot both of my computer and my phone, I've tried to switch between multiple USB cables and computers and it still does not work.
When I plug my phone in the USB port of my computer, there is some kind of loop : it connects and deconnects several time until I unplug it. Charging seems working fine and I have no clue of what's happening... I need help !
Device infos :
Xperia z1 c6903, locked bootloader, running android 4.4 kitkat on .757 firmware with the MonXdified rom, 32GB sd card, 16GB internal storage.
Help me please !
PS: Sorry for my english but I am french.
Did you install correct z1 driver?
Or try with another usb cable
Sent from my C6903 using XDA Free mobile app
hxq88 said:
Did you install correct z1 driver?
Or try with another usb cable
Sent from my C6903 using XDA Free mobile app
Click to expand...
Click to collapse
I've already installed the correct drivers and tried different usb cables... I don't know what to do now.
Kōsen said:
I've already installed the correct drivers and tried different usb cables... I don't know what to do now.
Click to expand...
Click to collapse
Any other PC to try without installing drivers?
eclyptos said:
Any other PC to try without installing drivers?
Click to expand...
Click to collapse
Already tried it, and it absolutely doesn't work...
Kōsen said:
Already tried it, and it absolutely doesn't work...
Click to expand...
Click to collapse
Go via Warranty, if you have it, if don't some technician to look into it.
I have a very very big problem: I cannot connect my phone to my x64 windows 7 PC. Can anybody help me ?
alexhdkn said:
I have a very very big problem: I cannot connect my phone to my x64 windows 7 PC. Can anybody help me ?
Click to expand...
Click to collapse
Do you have Motorola Device Manager installed? cause that would be step zero.
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
and try different ports.
alexhdkn said:
I have a very very big problem: I cannot connect my phone to my x64 windows 7 PC. Can anybody help me ?
Click to expand...
Click to collapse
Do you happen to be using the xposed module Lockscreen Disabler? USB would not work for me until I disabled it.
numanair said:
Do you happen to be using the xposed module Lockscreen Disabler? USB would not work for me until I disabled it.
Click to expand...
Click to collapse
i don't have root
dtg7 said:
Do you have Motorola Device Manager installed? cause that would be step zero.
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
and try different ports.
Click to expand...
Click to collapse
tried all and installed it many times
Check you phone settings.. Should have debugging enabled
Slapped my Moto
Try different cables and USB ports
numanair said:
Do you happen to be using the xposed module Lockscreen Disabler? USB would not work for me until I disabled it.
Click to expand...
Click to collapse
dtg7 said:
Do you have Motorola Device Manager installed? cause that would be step zero.
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
and try different ports.
Click to expand...
Click to collapse
xpsychox said:
Check you phone settings.. Should have debugging enabled
Slapped my Moto
Click to expand...
Click to collapse
why would i need to enable debugging settings to connect my phone?
nhizzat said:
Try different cables and USB ports
Click to expand...
Click to collapse
done! still nothing
alexhdkn said:
tried all and installed it many times
Click to expand...
Click to collapse
why would you need to install it many times??...
when you say a statement like "I cannot connect my phone to my PC" that really isn't saying much. but let's say you mean that your phone isn't being recognized as connected, plugged in as unknown device at all.
First thing you need to do is figure out who the culprit is, is it your android phone or your windows PC. Easy check: try plugging in your phone in another PC. at the very least it should pop up as a connected unknown device, or as your moto model number. if one PC doesn't show it try as many as you have access to.
You can also try plugging in other devices in your original windows PC and see if they're recognized.
so there are a few scenarios but I'll pick one scenario where your phone connects to the other PCs and your computer recognizes other devices. in this case (or even in most cases) I'd suspect a problem or conflict in the device manager of your PC. plug in your phone and go into control panel, device manager and look through it, look at the USB connections, look for any yellow error triangles, and if you notice something fishy uninstall the device and unplug and replug your phone.
keep trying at the end of the day you're the only one with physical access to your hardware so you're the one in the best position to troubleshoot it.
was doing it as a quick suggestion... as the previous posts says, u didn't tell us much info... we don't know what you've done, nor tried...
[SOLVED]
Try updating your USB drivers. Might help or try connecting to another pc
Sent from my Le X526 using Tapatalk
DayWalker said:
Try updating your USB drivers. Might help or try connecting to another pc
Sent from my Le X526 using Tapatalk
Click to expand...
Click to collapse
Please Read the 3rd line of my post. I have said already "I have also tried formatting my le 2 and my pc but still the same"
And also as i know about these things being a developer myself and having rooted and developed some things for some few phones before, i have also tried uninstalling the drivers completely also tried installing other drivers which i find compatible. But still the Same Problem....
Can you please do 1 thing, can you use a tool named DrvBk and backup your le 2 related drivers? And then give it to me so i can try installing that...
It will be very helpful of you.
Thanks in advance.
Rishabh Rao said:
Please Read the 3rd line of my post. I have said already "I have also tried formatting my le 2 and my pc but still the same"
And also as i know about these things being a developer myself and having rooted and developed some things for some few phones before, i have also tried uninstalling the drivers completely also tried installing other drivers which i find compatible. But still the Same Problem....
Can you please do 1 thing, can you use a tool named DrvBk and backup your le 2 related drivers? And then give it to me so i can try installing that...
It will be very helpful of you.
Thanks in advance.
Click to expand...
Click to collapse
Well i thought you only formatted le2 anyway yeah i supposed i could. Ill See to it
Sent from my Le X526 using Tapatalk
I dont think its the driver problem. The might be the USB code running on the phone is failing. I was unable to find driver(INF file with VID and PID) for LEECO Le 2(You can find PID/VID using USBVIEW). Suggest to use AIRDROID or SHAREIT that is if your WIFI is working Or USB OTG(I thing you have thought this).
DayWalker said:
Well i thought you only formatted le2 anyway yeah i supposed i could. Ill See to it
Click to expand...
Click to collapse
Thanks
caldran said:
I dont think its the driver problem. The might be the USB code running on the phone is failing. I was unable to find driver(INF file with VID and PID) for LEECO Le 2(You can find PID/VID using USBVIEW). Suggest to use AIRDROID or SHAREIT that is if your WIFI is working Or USB OTG(I thing you have thought this).
Click to expand...
Click to collapse
Yes but im just confused about 1 thing i even did factory reset and even full wipe and flash on my le2 and also usb works well in fastboot mode. So i can't figure out what's the problem.....
And also i would have got the driver INF file
But the phone is just giving no driver to my pc
And pc says device descriptor request failed. So means pc can't even identify phone. so how can i get the pid or vid cause i dont even have any drivers....
And share it or airdroid wont work for me as my pc doesn't have a wifi card
So rerouting file thru my modem would be very slow for transferring file of more than 10 gb size. So it would take hours maybe for that
So only solution i have now if usb not solved is to buy a new usb otg cable as my old one got ripped. So if i dont get any solution within a few days, then thats my only option :crying:
Rishabh Rao said:
Thanks
Click to expand...
Click to collapse
Here's the link of my Driver Backup. Hope it would help.
https://drive.google.com/open?id=0B_U5K4aTA3J3cWQ1Y2tTajc3Nms
First check your pc usb port is work perfectly
sandip121 said:
First check your pc usb port is work perfectly
Click to expand...
Click to collapse
Please Read the Post properly and then comment..
I have said already
IF according to u my pc usb port is not well, then how could i connect it in fastboot and how could it work there?
And also i have even tried it in different ports but still the same.
What happened with the drivers? Were you able to get your phone back to work?
Sent from my Le X526 using Tapatalk
DayWalker said:
What happened with the drivers? Were you able to get your phone back to work?
Sent from my Le X526 using Tapatalk
Click to expand...
Click to collapse
No actually not
My usb is still the same
But @caldran gave me the idea of using airdroid
And thats working well
I dont get speeds of usb with it
But atleast
Something is better than nothing right...
So i gotta live with it....
Anyway thanks for ur help
Hey bro, try pda.net
BhaiDon said:
Hey bro, try pda.net
Click to expand...
Click to collapse
Bro if you dont know the solution, then please dont give foolish answers....
Read the full post again before answering please......:silly:
And if phone will disconnect as soon as connected even in AT mode then how could PdaNet Work, BTW FYI i tried it already.... By my AIO Toolkit.
Bro, My Le2 was also not connecting to PC..same problem as you
But Then I tried pda.net both on my pc & phone..and whooooop....my phone connected to pc
And by the way, I am new to XDA, but not foolish....
I run my own mobile repair centre at Ahmedabad:good:
BhaiDon said:
Bro, My Le2 was also not connecting to PC..same problem as you
But Then I tried pda.net both on my pc & phone..and whooooop....my phone connected to pc
And by the way, I am new to XDA, but not foolish....
I run my own mobile repair centre at Ahmedabad:good:
Click to expand...
Click to collapse
Bro im sorry if i hurt u by any means, i didn't mean it.
I just wanted to say that PdaNet doesnt work for me
And actually i thing ur problem was with drivers.
But now i realize mine isnt
My problem is maybe in the usb port/hardware of my le2
It connects well in fastboot mode
But now when i connect in android or recovery mode it says not recognized
Anyways thanks for trying to help me
Sent from my Le 2 using XDA Labs
Rishabh Rao said:
Bro im sorry if i hurt u by any means, i didn't mean it.
I just wanted to say that PdaNet doesnt work for me
And actually i thing ur problem was with drivers.
But now i realize mine isnt
My problem is maybe in the usb port/hardware of my le2
It connects well in fastboot mode
But now when i connect in android or recovery mode it says not recognized
Anyways thanks for trying to help me
Click to expand...
Click to collapse
Its alright bro
I don't know if this'll work for you
i had the same problems all i did was Right click and updated driver then
click on browse driver
then click on let me pick
Then select MTP USB driver and then click next
It worked for me and it may be too standard but try it might work
lesterjoel123 said:
I don't know if this'll work for you
i had the same problems all i did was Right click and updated driver then
click on browse driver
then click on let me pick
Then select MTP USB driver and then click next
It worked for me and it may be too standard but try it might work
Click to expand...
Click to collapse
No bro it doesn't work.
Tried a 100 times already
My nexus 6 is rooted. 10 days back it stopped charging from my turbo charger. I accidentally wiped everything including the OS and the internal storage from TWRP mode. Now when I am connecting the device to my laptop it is saying usb not recognized( device descriptor request failed). I have tried everything to solve this. I have updated all drivers and tried out in different devices with different usb cables but all in vain. I also tried to mount otg in TWRP mode but I can't check the mount usb otg box in recovery mode. Please help me out.
amlanbaruah555 said:
My nexus 6 is rooted. 10 days back it stopped charging from my turbo charger. I accidentally wiped everything......
Click to expand...
Click to collapse
Start with wireless charging; there must be some energy in the N6 to communicate with other devices. And clean the USB connector with a small brush wetted with isopropanol or alcohol.
If what @NLBeev recommends doesn't work, you may have no choice but to flash a stock ROM image using ADB. So long as you left your bootloader unlocked, flashing a stock image should restore your device to a running state.
Guys my device is charging from other chargers so there is no problem in charging it. To use adb sideload my device needs to be recognised by my pc but it doesn't. How do I sideload my device then?
Did you install the USB driver Google provides?
Yeah i have installed all the drivers.
amlanbaruah555 said:
Yeah i have installed all the drivers.
Click to expand...
Click to collapse
Cable OK? Try a different one.
USB-port OK? Use a different PC.
When using Windows 10 and having driver issues; uninstall and delete the drivers from the PC and let Windows 10 search the internet for updated drivers.
NLBeev said:
Cable OK? Try a different one.
USB-port OK? Use a different PC.
When using Windows 10 and having driver issues; uninstall and delete the drivers from the PC and let Windows 10 search the internet for updated drivers.
Click to expand...
Click to collapse
I have tried everything but nothing is working. Is there any other way?
Not that I can think of. You may have a bad USB port on the device, which means a trip to the nearest repair center.
amlanbaruah555 said:
I have tried everything but nothing is working. Is there any other way?
Click to expand...
Click to collapse
Have you cleaned the USB port?
Yes I have cleaned it. I even went to the service centre once and they said that your mofherboard needs to be changed. But my motherboard is fine.
How do you know your motherboard is fine? Clearly your motherboard isn't fine if the USB port isn't working.
Strephon Alkhalikoi said:
How do you know your motherboard is fine? Clearly your motherboard isn't fine if the USB port isn't working.
Click to expand...
Click to collapse
Yeah maybe. So do I need to change my motherboard then? How much will it cost?
You would need to replace the motherboard, but I don't know how much they cost. Sorry.