Related
I found a problem with my kaiser phone last night. The problem is that if I listening to music with my bluetooth headset I am not able to connect to my WiFi at the same time. This problem is specific to A2DP because my headset can be connected to my phone and I can not browse the web with WiFi. Has anyone seen this problem before? Has there ever been a resolution for it?
stevencage7 said:
I found a problem with my kaiser phone last night. The problem is that if I listening to music with my bluetooth headset I am not able to connect to my WiFi at the same time. This problem is specific to A2DP because my headset can be connected to my phone and I can not browse the web with WiFi. Has anyone seen this problem before? Has there ever been a resolution for it?
Click to expand...
Click to collapse
I've seen this too -- when using A2DP, the WiFi connection goes down & won't re-establish itself until I turn off A2DP. I haven't found a resolution yet -- not that I'm looking for one as I almost never use A2DP, and when I do, I'm in the car, where WiFi isn't too useful.
See my post here which may be a related problem. I assume you have the same new HTC ROM: http://forum.xda-developers.com/showthread.php?t=396409
I have a similar issue. If I am streaming music, from my HP media server, over wifi and using my Plantronics 590A bluetooh headphones, after each song I am asked to log back onto the network and as each song comes to an end my device starts to search for a network connection. I don't have this issue when I use wired headphones. Clearly there is an issue when both bluetooth and wifi are used at the same time. I don't know if it's hardware or software but I'm not happy about it.
akey
HTC TyTN II (Kaiser/P4550)
Rom ver: 1.82.707.0 WWE
Rom date: 11/03/07
Radio ver: 1.27.15.32
WM 6 Professional
CE OS 5.2.1620 (18125.0.4.2)
It's normal. Without going too technical, WiFi and Bluetooth operate on the same frequencies. They will live together if they're not using too much bandwidth, but if the usage is heavy there will be problems.
A BT stereo headset represents a lot of data to send and thus bandwidth usage, which means the BT will use the spectrum heavily, stepping over the Wifi. Due to the many packet losses the Wifi connection cuts.
Other way around, if Wifi is under heavy load, Bluetooth might drop.
Nothing we can do, that's what happens when you pack 2 radios operating in the same frequency band so close to each other, or even maybe sharing the same antenna which might be the case in today's phones.
It is absolutely NOT normal. The reason I know this is that VoIP over WiFi has been running almost perfectly on my TyTN II for a year, until I installed the latest ROM by HTC which broke it.
I used to get no crackle on Bluetooth calls with WiFi turned on. Now I do.
I used to get great quality VoIP. Now it is beyond unusable.
Simply, their new ROM broke it. BT and WiFi used to live in harmony, until their buggy ROM came out the other day. I think there are many users who know this, and who expect a hotfix soon.
You're talking about calls, I assume using the BT headset profile, while the other people in the thread are using A2DP wireless stereo. They're very different in terms of bandwidth.
On mine the headset with WiFi is also fine, but not A2DP. You're apparently not having the same issue than what is mentione in this thread. Yours might be due to the ROM, but the A2DP thing is more likely to be related to what I explained. I could myself experience it with several ROMS (all WM6, never tried a 6.1).
kilrah said:
It's normal. Without going too technical, WiFi and Bluetooth operate on the same frequencies. They will live together if they're not using too much bandwidth, but if the usage is heavy there will be problems.
A BT stereo headset represents a lot of data to send and thus bandwidth usage, which means the BT will use the spectrum heavily, stepping over the Wifi. Due to the many packet losses the Wifi connection cuts.
Other way around, if Wifi is under heavy load, Bluetooth might drop.
Nothing we can do, that's what happens when you pack 2 radios operating in the same frequency band so close to each other, or even maybe sharing the same antenna which might be the case in today's phones.
Click to expand...
Click to collapse
My old TyTn II worked fine with BT and WiFi on at same time - never a problem. I always had WiFi on at home for emails etc... and always have my BT headset (Plantronics 8XX mono) working as I hate holding phone to my ear and get a lot of calls.
I recently bought another TyTn II and then unlocked it using advice form this forum (many thanks to all BTW!) and installed latest HTC rom and WM6.1 etc... Now I love many aspect of the new ROM but I can't use BT and WiFi at same time.
So from my experience it MUST be the new HTC ROM software issue.
Okay, chalk me up as another victim of this Wireless + A2DP = Crap Reception. I've tried three other Radios and the effect is the same.
I was using a rom I got in about April, and I could stream music from the internet over wireless listening to it on my Pantronics 590A's over bluetooth no issues (other than battery lol). Now with a rom I got this month, I can listen to music over bluetooth no problem, surf using wireless no issue but as soon as you mix them both it's all bad. Also, I need to re-pair my headphones whenever I want A2DP, where previously I could just turn on the headphones and have them connect. Also, no headset icon in the taskbar.
It's not a CPU issue as there's no excess usage when you both have them enabled. Personally I'm going to point the finger at the bluetooth stack here.
As far as I remembered when I first purchased the ATT Tilt with my Plantronic Voyager 855 I WAS able to stream via Wifi (Winamp Remote) and use my bluetooth without a problem. It's when I started to put cooked roms in the Tilt that it stopped working correctly...
Besides, I use a Macbook Pro via Wifi only and I listen to my Itune via my Plantronic Voyager 855 everyday. If it's true about WiFi overloading Bluetooth on the frequency. Why does it work fine on the MBP?
And Finally.... to make my point...
I also have an AT&T Fuze. Works fine there. Matter affact. I'm currently connected via bluetooth to my Fuze with my Voyager 855... turned off 3G/HSPDA on the Fuze. WiFi on the Fuze using Winamp Remote to connect to my PC streaming from there. Explain that....
Has anyone fixed this problem?
I'm experiencing the same problem on my kaiser aka xda stellar. When Wifi is turned on bluetooth A2DP stereo connection is dropped.
Hi Guys,
i have this problem for a long time and didn't find anything about it in web or in xda forums.
I have a HTC Dream + HBH-IS 800 Sony Ericsson Headset.
When i listen to music via A2DP the connection is not very stable...
the connection interrupts very often for about 2 or 3 seconds, then works for about 3 seconds.
This only happens when i am outside, not in buildings. I this the reason is because of interferences. The connection gets better when i move the G1 into a specific orientation (upper side up) and don't turn my head to the right
On my old Windows mobile phone i played around with bitpool (=ratio between quality and connection stability by constant bitrate) settings... is there a possibility to get the connection more stable, when playing around with this setting?!
How can this setting be changed on android?
Further information:
-ROM Cyanogen 4.2.5 but same problem on stock ROM
-HTC Dream has been replaced one by a new device -> same problem
-Headset was never exchanged, but worked perfectly on my old Touch Pro with WM 6.1
Thanks for your help
There is a known issue on the Bluetooth stack and is suppose to be fixed in the Elclair 2.0 fix, the temporary work around is to first pair and connect then disconnect and reconnect it again i'm having to do that several times a day when i use my RocketFish bluetooth stereo headset. Hope that helps
thanks for this workaround, will try it tomorrow and will post if it works for me too
hmm, didnt really work for me... no change after pairing disconnecting and connecting again.
i wonder why this only happens outside, not in buildings... another frequencys which interferences maybe?!
Be sure to disable wifi.
Not trying to hi-jack your thread. If you want me to open another i will. However this is a BT question as well.
my G1 is set to connect to my stereo in my car. Pioneer BT head unit. I find that i have to manually tell it to connect every time i get in the car. When i had a blackberry before it would just connect every time on its own without me doing anything once i made the initial connection.
Any ideas?
thanks.
Press1Now said:
There is a known issue on the Bluetooth stack and is suppose to be fixed in the Elclair 2.0 fix, the temporary work around is to first pair and connect then disconnect and reconnect it again i'm having to do that several times a day when i use my RocketFish bluetooth stereo headset. Hope that helps
Click to expand...
Click to collapse
Worked on Dell Streak A1.6
I have Dell BH200 headset as well, and I have the same exact problem its like the audio stutters but when I first connect it its more stutter than music so you can barely even understand the music until after 30secs when it starts to normal out.
ATM im runnning Stock 1.6 for G1, im going to try Cyanogenmod 6.0 tomorrow and see if anything changes.
but everyday I go back and forth with my laptop and phone since my headphones run for atleast 3-4 days.
wow, finally someone having the same problem.
and even the same description of the connection issues.
I recently bought a orange SanFran and, as the device is fairly cheap, a nokia bh-504 along with it.
The connection isnt stable even when I put it in my breast pocket.
As soon as I move my head to the right, the streaming stops. Completely.
I can easily stop the music when holding my hand in front of the right earpiece.
so i will try the disconnect / connect again "workaround", but I don't think that will help.
I paired the same headset with my gf's netbook and I could walk through the whole apartment and the signal was stable even through up to 4 walls.
so no one here knows how to tweak BT settings in android?
Got a brand new amazing bluetooth 4.0 speaker so I've been playing the hell out of some music. I've been noticing the phone has been noticeably way slower in internet function.
I was getting extremely frustrated so I ran a test. Turned off bluetooth and ran a Speed Test. 31mbps down without bluetooth. and 4.5mbps down with bluetooth on.
The connection was also bouncing around all over the place and not stable with bluetooth.
WTF?
I previously owned a Sony Z3v and had no complaints. I run and workout regularly so I often use bluetooth headphones while doing so. These in particular http://www.plantronics.com/us/product/backbeat-fit. I'm been having issues since day 1 with these disconnecting. I have to power them down and power them up again to reconnect. Even when they lose connection, they show they are connected but are non responsive. I had not trouble whatsoever with my sony experia.
Anyone else having these kind of issues? I've checked the forums and I don't see any reports. Is this isolated?
I only use Bluetooth when I'm in the shower with the beats pill but it works great for me.
Sent from my SM-G925V using Tapatalk
Not entirely related but I have had issues with my original Galaxy Gear disconnecting somewhat frequently when I disconnect my BT head unit or at other seemingly random times that sometimes require me to turn BT off and on again. It's not that huge of an issue usually but BT on my S6 is not perfect for sure.
Sent from my Galaxy S6 Edge
I am having Bluetooth disconnect issues with my car. Will connect and disconnect repeatedly for about 7 minutes and then stay connected. Very annoying. Have tried several fixes but nothing has worked.
I haven't had an issue with mine when using it for my gopro.
The issue is with Android using Bluetooth 4.0 and WiFi simultaneously. I've had these issues since owning the phone. For whatever reason if you connect your phone to a bluetooth speaker where both devices are BT 4.0, the WiFi will be extremely slow or not work at all.
If you don't believe me, try it. As soon as you connect the device, try to load something like a video or song over WiFi. Or even send a Facebook message. It'll stall. As soon as it stalls, turn off WiFi and it'll magically start working again over cellular data.
No issues here, usually stream to a Bose Color Sound device, getting connection through WiFi
I have issues with mine pretty regularly with my car. A reboot of the phone will sometimes fix it. It's annoying, sometimes it will disconnect from audio but not phone or vice versa. Or it will work perfect, I'll get a phone call and it all goes to crap. The remainder of the drive will generally result in fighting with it. Maybe it will reconnect, but most of the time it won't. Never have I had a phone with so many bluetooth issues.
Had issues with my truck head unit / phone BT. Phone would continually disconnect.
Tracked it down to the Messages transferring to head unit.
If I disabled Messages in the Bluetooth / Allow Access To area, it worked fine, but obviously messages wouldn't go to my truck.
I cleaned all messaging apps, factory reset truck head unit, no fix. eventually factory reset the phone, havn't had any problems since.
Deuces said:
Had issues with my truck head unit / phone BT. Phone would continually disconnect.
Tracked it down to the Messages transferring to head unit.
If I disabled Messages in the Bluetooth / Allow Access To area, it worked fine, but obviously messages wouldn't go to my truck.
I cleaned all messaging apps, factory reset truck head unit, no fix. eventually factory reset the phone, havn't had any problems since.
Click to expand...
Click to collapse
Stopped working again.
Anyone else have an issue with Bluetooth audio cutting out every few minutes then works fine again for a few?
Yes!
jellyhead said:
Anyone else have an issue with Bluetooth audio cutting out every few minutes then works fine again for a few?
Click to expand...
Click to collapse
Took forever to get it to pair with my Onkyo Receiver, then dropped the connection twice??
Just got my device yesterday, and I'm having issues as well. My Gear S3 keeps saying it's disconnected and will reconnect in a bit. Pretty annoying.
Moostafa29 said:
Just got my device yesterday, and I'm having issues as well. My Gear S3 keeps saying it's disconnected and will reconnect in a bit. Pretty annoying.
Click to expand...
Click to collapse
Annoying is putting it lightly, It seemed that my Gear S3 and the Onkyo Receiver are fighting for the BT connection??
For some reason this phone doesn't connect well with other Bluetooth devices nearby. I turned off 2 other Bluetooth devices inside the house and now the connection is good with my patio speaker.
No problems here. I always have my Gear S3 connected to the phone by BT, and often have a BT headset connected to the phone too.
I paired both my bt speakers yesterday and ran the dual audio from the phone for hours without issue.
Maybe the problem is device specific. I remember having the same issue with my note 7 and this BT adapter for my Onkyo receiver.
The only time my Gear S3 Frontier complains about being disconnected is when I'm out of range of the Note. The Note connects fine to my car ('14 BMW 535ix) and radar detector (can't have a BMW without one! :laugh, while remaining connected to my watch.
Yes, here also issues with connecting audio to car kit. Funny that I only noticed this after the first samsung oficial update.
It connects to the hands free phone, bit not to audio. Cleared Bluetooth system apps memory and cache and 8t worked again. Short time though. Problem is back again...
Now putting my hope on Samsung update.
Oh my gosh it's driving me crazy! One time BT stayed on 28 minutes. Usually it cuts off the call in 2-3 minutes!
Not sure what Note 8 types have BT issues, my N950U1 (SD), never has an issue. Maintains connection with Gear S2, always connects to car (audio and phone, Volvo XC60) and streams music and facilitates calls to wireless head buts/headphones. No hickups or disconnects whatsoever. Compared to Note 5 a huge improvement.