Database Develop

Need help REMOTE COMMAND NOT ALLOWED (Can't go back to stock)

I have an L19C900B220 origanally C185, I tried changing the cust and got stuck on C900, and I also lost root access for some reason, so I tried to reboot to TWRP but it would just take me back to huawei recovery, so I went on SRK and tried to reflash TWRP and it gave me an error (Remote command not allowed) I tried to relock the bootloader same error, I tried to flash the revcovery.img through adb and got the same error, and I checked that OEM unlock was turned on, any ideas? Also DLOAD method gives me something along the lines of your deivce isn't compatible with this software or something
EDIT: NOW ON TWRP 3.1.0-0 can't mount data or system, can't do a data format either, don't know where to go from here, also lost access to use my phone so need an urgent fix, found out I'm still on NRD90M test-keys firmware
EDIT: Flashed recovery and boot, tried to flash system.img it said it worked in SRK, but my phone would be stuck on the bootloader warning screen

From where did you download your firmware? Use official website to download for right and not corrupted firmware.

kyle_2103 said:
I have an L19C900B220 origanally C185, I tried changing the cust and got stuck on C900, and I also lost root access for some reason, so I tried to reboot to TWRP but it would just take me back to huawei recovery, so I went on SRK and tried to reflash TWRP and it gave me an error (Remote command not allowed) I tried to relock the bootloader same error, I tried to flash the revcovery.img through adb and got the same error, and I checked that OEM unlock was turned on, any ideas? Also DLOAD method gives me something along the lines of your deivce isn't compatible with this software or something
Click to expand...
Click to collapse
I had the same issue, I had to use DC Phoenix to restore mine, which was a total pain

Impossible to install TWRP on Nougat rom

I have a big problem to install TWRP on my P9 EVA-L09C432B378..after unlocked the bootloader; activate debugging mode, I use SRKToolHuawei-Lod-Chong-V2.0-20161002 with success but i want to reboot in recovery, it's Huawei stock recovery, I try another method with command and ADB and TWRP 3.0.2.0 with success, but got same issue, no TWRP...So I decide to revert back to 6.0 and update again to B378 version and try again both methods but still same issue.....is there a solution????
thank's
EDIT : FINALLY, I answer myself because I find THIS and it worked on 1st try, so now I'm rooted but I can't still install TWRP....
try again with rooted device bit still the same...

Please help unbrick my phone

I have bricked my phone after Magisk install fail.
I first unlocked bootloader succesfully
then i installed twrp succesfully
then i flashed magisk using twrp - this failed and sent device to erecovery. (which won't find package)
i used twrp to wipe data, now i was able to boot, and it installed like a fresh EMUI. However, almost all apps were broken- could not download themes/camera shut down etc.
To fix this, i wanted to restore to stock and did the following: download update package for my VTR-L09 of EMUI b175 (I was on b162 before), used Huawei Update Extractor to extract files and flashed BOOT.IMG, SYSTEM.IMG and RECOVERY.IMG. This was done without error.
Now my phone won't boot at all. I am stuck at the 'your device can't be trusted' screen. I cannot go into recovery. When I connect via USB, I hear the chime in Windows but I can't seem to connect with ADB.
What to do now?? Am I hard-bricked? I hope that anyone knows how to deal with my phone bricked like this. Please help me to solve this issue.
Best of wishes.
Edit: I am able to enter forced recovery, however updates fail at 5%.
I am also able to fastboot with USB, however I am unsure what to do next.

I unbricked my phone! Many thanks to who ah way and his solution found here: https://forum.xda-developers.com/p10/how-to/guide-unbricking-p10-using-hwota-windows-t3714416
:victory:

why are you doing it when you dont understand it?
You cannot flash part of B175 firmwar eover B162 firmware.. OMG.
use the HWOTa to go back to stock and please stop playing with the device without propper knowledge

Unable to boot images via Fastboot

Hi,
Recently I updated my EMUI firmware via the official OTA system.
I had the bootloader unlocked prior to installing the update however afterwards the bootloader was locked. I have verified this in Fastboot.
I wish to flash Magisk on my P9 Plus, however, I have a bootloader unlock code (back when Huawei gave them out freely) however I don't want to unlock the bootloader as it will factory reset (I spent a long time setting everything up).
I tried flashing a TWRP image however the bootloader prevents it as it is not unlocked.
The only other method would to boot the custom recovery image however when executing fastboot boot recovery TWRP twrp-3.1.1-1-vie.img it gives FAILED (remote: Command not allowed). I had noticed this inability to boot images even when I had the bootloader unlocked (I did not want to overwrite the stock recovery or eRecovery for easier OTA updates).
I have the Chinese variant of the P9 Plus : VIE-AL10 Full Netcom Edition.
Is anyone else having this problem? Please let me know if or how to fix this.
Thanks

It's been a while since I last used fastboot boot but if i remember correctly the command is "fastboot boot recovey.img, without that" recovery" in between

if the bootloader is locked you cant flash magisk or any other, also you cant boot with any images

My H9L Is BootLoop

Hello all..
my name is daniel, i have an H9L. My H9L has been rooted and installed TWRP. I want to install a ROM called LineAgeOS, before that I have backed up the data. and I started to reset my H9L, when I wanted to install a ROM there was a problem, because the difference in my processor failed to install the ROM. and I hit it wrong, I restarted my H9L, now my H9L is on without a stock ROM, and it is strange that my TWRP is not working, just stuck in the TEAMWIN logo, can anyone help me to restore my H9L the original state, my H9L only works in the FASTBOOT MODE state, I tried to flash my H9L with ADB DRIVER but failed, I tried to flash with MICRO SD and made the dload folder but failed at 5%, what have I confused, is there anyone here who can help my problem, THANK YOU.

DjPangau said:
Hello all..
my name is daniel, i have an H9L. My H9L has been rooted and installed TWRP. I want to install a ROM called LineAgeOS, before that I have backed up the data. and I started to reset my H9L, when I wanted to install a ROM there was a problem, because the difference in my processor failed to install the ROM. and I hit it wrong, I restarted my H9L, now my H9L is on without a stock ROM, and it is strange that my TWRP is not working, just stuck in the TEAMWIN logo, can anyone help me to restore my H9L the original state, my H9L only works in the FASTBOOT MODE state, I tried to flash my H9L with ADB DRIVER but failed, I tried to flash with MICRO SD and made the dload folder but failed at 5%, what have I confused, is there anyone here who can help my problem, THANK YOU.
Click to expand...
Click to collapse
Have you tried Erecovery to restore stock?
On the bootloader unlocked warning screen press and hold volume+ for 3 secs.
Needs to use WiFi.

Try yo reflash twrp in fastboot mode. The command is fastboot flash recovery_ramdisdisk twrp. Img
Before you have to put twrp. img in the adb folder

I'm experiencing the same problem after trying to root my h9l through twrp the mistake I made is that I flashed the image in a wrong partition.
I can only access a fastboot mode with frp and phone unlocked, it cannot even display a charging screen. Once plugged it keeps on rebooting and hangs on error screen,
I have tried to flash kernel,ramdisk, recover_ramdisk and system images all on their respective partition, the flashing went well, but the phone didn't respond.
I've tried to flash boot.IMG (some one posted for h9l,) into Boot partition, but it revealed an error.
Any one please help what should I do to brings by device back to lite