Hi!
I've tried finding anything related to why Dolby Atmos isn't working on Oreo based ROMS? It works for like half a second then Dolby Atmos crashes?
Atmos will not be supported for Oreo until an OEM ( Lenovo) officially builds it. It'll keep crashing, and there won't be fixes. Don't flash any shady zips you see on the net
My signature may say I use Dolby Atmos and an Oreo ROM, but that's just me too lazy to get off my bum to correct it xD.
Cheers!
thes3usa said:
Atmos will not be supported for Oreo until an OEM ( Lenovo) officially builds it. It'll keep crashing, and there won't be fixes. Don't flash any shady zips you see on the net
My signature may say I use Dolby Atmos and an Oreo ROM, but that's just me too lazy to get off my bum to correct it xD.
Cheers!
Click to expand...
Click to collapse
Thanks for the information! Is there anyway for us to increase BT-audio? since headphone volume can be adjusted with kernels...
Indigoeyes said:
Thanks for the information! Is there anyway for us to increase BT-audio? since headphone volume can be adjusted with kernels...
Click to expand...
Click to collapse
May be possible by modifying /system/etc/mixer_paths_tasha.xml file
przemcio510 said:
May be possible by modifying /system/etc/mixer_paths_tasha.xml file
Click to expand...
Click to collapse
I've tried searching for anything related to BT-audio in mixer_paths_tasha but without any results
Indigoeyes said:
Thanks for the information! Is there anyway for us to increase BT-audio? since headphone volume can be adjusted with kernels...
Click to expand...
Click to collapse
You can try with Viper4Android...
Related
Hi Guys,
I have taken the liberty to post Dolby Atmos ported from LeEco Le pro 3 so it can be used for our custom rom’s.
I have tested and working ( including dirty flash over Le Max 2)
Big thanks to original owner @ahrion
dax_lepro3
Collective Dolby Atmos Port Thread
It would probably be more efficient to link my entire thread than just upload the specific Atmos to it. However I have an update coming for that specific one either tomorrow or today in which the original link is removed and replaced with a new link + mirror.
ahrion said:
It would probably be more efficient to link my entire thread than just upload the specific Atmos to it. However I have an update coming for that specific one either tomorrow or today in which the original link is removed and replaced with a new link + mirror.
Click to expand...
Click to collapse
Thanks bro. This is an awesome work.
I will have it linked when you upload the stable version.
saraprobe said:
Thanks bro. This is an awesome work.
I will have it linked when you upload the stable version.
Click to expand...
Click to collapse
Link my thread.
ahrion said:
It would probably be more efficient to link my entire thread than just upload the specific Atmos to it. However I have an update coming for that specific one either tomorrow or today in which the original link is removed and replaced with a new link + mirror.
Click to expand...
Click to collapse
By the way what does deep buffer do?
saraprobe said:
By the way what does deep buffer do?
Click to expand...
Click to collapse
On some ROMs/devices streaming + V4A or Dolby does not work. It appears to be working but you can't hear the difference, flashing the deep_buffer fix deletes audio_policy.conf lines. On some devices this could cause a bootloop. If you don't have that problem, there's no need to flash.
ahrion said:
On some ROMs/devices streaming + V4A or Dolby does not work. It appears to be working but you can't hear the difference, flashing the deep_buffer fix deletes audio_policy.conf lines. On some devices this could cause a bootloop. If you don't have that problem, there's no need to flash.
Click to expand...
Click to collapse
One thing i have noticed with Lemax 2 port was volume tend to fluctuate in when its low. has anyone reported this?
saraprobe said:
One thing i have noticed with Lemax 2 port was volume tend to fluctuate in when its low. has anyone reported this?
Click to expand...
Click to collapse
I would assume this varies by device. However I wouldn't differentiate it with the one that comes with your stock rom. I include a modified version of the dax_default.xml in which I remove the volume heightening restriction and turn on audio regulation/modifications.
ETA: This allows your audio to reach higher highs, lower lows, and more consistent mids. Rather than a locked sound. Turn the left EQ bar all the way up and use V4A and you'll hear your bass thump without being too overbearing.
ahrion said:
I would assume this varies by device. However I wouldn't differentiate it with the one that comes with your stock rom. I include a modified version of the dax_default.xml in which I remove the volume heightening restriction and turn on audio regulation/modifications.
ETA: This allows your audio to reach higher highs, lower lows, and more consistent mids. Rather than a locked sound. Turn the left EQ bar all the way up and use V4A and you'll hear your bass thump without being too overbearing.
Click to expand...
Click to collapse
I noticed stock was locked in Leeco lepro 3
saraprobe said:
I noticed stock was locked in Leeco lepro 3
Click to expand...
Click to collapse
Right. I removed that restriction.
ahrion said:
Right. I removed that restriction.
Click to expand...
Click to collapse
Which one? old upload or new one coming up?
saraprobe said:
Which one? old upload or new one coming up?
Click to expand...
Click to collapse
I removed it in all the Dolby Atmos I've ported.
ahrion said:
I removed it in all the Dolby Atmos I've ported.
Click to expand...
Click to collapse
cool no worries
Hi @ahrion i tried to flash yours over stock rom which has Dolby but i am getting FC.
Can i manually place files or is anything i can do to get it going?
saraprobe said:
Hi Guys,
I have taken the liberty to post Dolby Atmos ported from LeEco Le pro 3 so it can be used for our custom rom’s.
I have tested and working ( including dirty flash over Le Max 2)
Big thanks to original owner @ahrion
dax_lepro3
Collective Dolby Atmos Port Thread
Click to expand...
Click to collapse
It its work on miui rom?
jimbo1212 said:
It its work on miui rom?
Click to expand...
Click to collapse
Try with magisk
Ok i will try it
hi
i try with cydras 20s :sound good (music,film...).but i lost sound in phone :/
coke15 said:
hi
i try with cydras 20s :sound good (music,film...).but i lost sound in phone :/
Click to expand...
Click to collapse
Uninstall or disable Audio FX, then reboot...
Hi. Thanks but i can't find audio fx? No audio fx on apps,neither with titanium?
Where is it hiden?
Hello!
I truly love music so I want the best quality ever! ARISE seems to have differents effects depending on the phone you're using so I'd like to know: for you what is the best ARISE config for OP5?
Thanks a lot!
Hate to say it, but what works for one person will probably sound like crap to you. Aside from different headphones, we all perceive sound differently and have different tastes in what sounds good
Sent from my ONEPLUS A5000 using Tapatalk
Thanks for your answer, Arise is such a big mod that I don't know where to start, especially with ICESound mod! But I will test
Believe it or not, the stock Dirac Sound thing is the best for OOS IMO.
I've tried ARISE with many different settings. My preference is stock without ARISE.
Here is my setting, you can try it
Viper DDC : AKG 501
Firequlaizer : acustic
Field surround : 4-5
Headphone surround : level 1
Viper bass : natural 50-6
Viper clarity : natural default
Thanks everyone for your answers! I'm actually testing Dirac
I like paschfirefx ground zero most on my op3.
furious.builder said:
Thanks everyone for your answers! I'm actually testing Dirac
Click to expand...
Click to collapse
what's Dirac?
gonsa said:
what's Dirac?
Click to expand...
Click to collapse
It's an audio mod, it's available inside Arise
I prefer
arise + Icesound pure present
that all. and leave viper default setting
furious.builder said:
It's an audio mod, it's available inside Arise
Click to expand...
Click to collapse
Where is it?
I flashed this mod https://forum.xda-developers.com/showpost.php?p=72972799&postcount=4 but it isn't there.
gonsa said:
Where is it?
I flashed this mod https://forum.xda-developers.com/showpost.php?p=72972799&postcount=4 but it isn't there.
Click to expand...
Click to collapse
If you correctly configured arise-configuration.prop, it has been installed. It doesn't have a config app, it's more like an "install and forget" mod
Just installed viper 4 arise and it is not processing,any solution?
What do you have installed in addition of Viper ? Dolby Atmos ?
NekroLime said:
Just installed viper 4 arise and it is not processing,any solution?
Click to expand...
Click to collapse
Inside v4a go to settings, enable Dev mode, disable se Linux
8hodgsonkh said:
Inside v4a go to settings, enable Dev mode, disable se Linux
Click to expand...
Click to collapse
Followed the steps and the problem still there
NekroLime said:
Followed the steps and the problem still there
Click to expand...
Click to collapse
Toggle viper off and on after you disable se Linux and it should start working
8hodgsonkh said:
Toggle viper off and on after you disable se Linux and it should start working
Click to expand...
Click to collapse
Alright,thanks for your reply, problem fixed,it was caused by the icesound thinggy
NekroLime said:
Alright,thanks for your reply, problem fixed,it was caused by the icesound thinggy
Click to expand...
Click to collapse
Glad to hear you got it working
Has anyone tried V4A on the Xiaomi Mi Max 2? What are your settings or presets for the phone speakers or wired headsets?
I have tried it with a few different impulse response files to try and improve the sound of both my phone speakers and my headphones. For the speakers: I have noticed an major improvement in the loudness when the volume is at 0- 50%, but at 100% volume, there is minimal difference between the with and without V4A, it fact the clarity is much better without V4A. Is this normal for you guys?
FangXIII said:
Has anyone tried V4A on the Xiaomi Mi Max 2? What are your settings or presets for the phone speakers or wired headsets?
I have tried it with a few different impulse response files to try and improve the sound of both my phone speakers and my headphones. For the speakers: I have noticed an major improvement in the loudness when the volume is at 0- 50%, but at 100% volume, there is minimal difference between the with and without V4A, it fact the clarity is much better without V4A. Is this normal for you guys?[/QUOT
Not in my case thou
Click to expand...
Click to collapse
Is it possible if you could share your setup?
Ashutosh4555 said:
FangXIII said:
Has anyone tried V4A on the Xiaomi Mi Max 2? What are your settings or presets for the phone speakers or wired headsets?
I have tried it with a few different impulse response files to try and improve the sound of both my phone speakers and my headphones. For the speakers: I have noticed an major improvement in the loudness when the volume is at 0- 50%, but at 100% volume, there is minimal difference between the with and without V4A, it fact the clarity is much better without V4A. Is this normal for you guys?[/QUOT
Not in my case thou
Click to expand...
Click to collapse
Is it possible if you could share your preset/settings?
Click to expand...
Click to collapse
Here
Ashutosh4555 said:
Here
Click to expand...
Click to collapse
How did you install viper4android and which exact version? I am asking because I had many problems installing it lately.
Kantastisch said:
How did you install viper4android and which exact version? I am asking because I had many problems installing it lately.
Click to expand...
Click to collapse
Depending on your version, could be that some will work and some not. if you are on Miui, just go and search for Divine Beats, the latest version, and flash it via TWRP. No need for wipe.
Kantastisch said:
How did you install viper4android and which exact version? I am asking because I had many problems installing it lately.
Click to expand...
Click to collapse
if you are using magisk for root, then try Viper4Android magisk module.
ekin_strops said:
Depending on your version, could be that some will work and some not. if you are on Miui, just go and search for Divine Beats, the latest version, and flash it via TWRP. No need for wipe.
Click to expand...
Click to collapse
No magisk and lineage 14.1
---------- Post added at 02:16 PM ---------- Previous post was at 02:15 PM ----------
reversegear said:
if you are using magisk for root, then try Viper4Android magisk module.
Click to expand...
Click to collapse
No magisk and lineage 14.1
ekin_strops said:
Depending on your version, could be that some will work and some not. if you are on Miui, just go and search for Divine Beats, the latest version, and flash it via TWRP. No need for wipe.
Click to expand...
Click to collapse
I don't understand this. Somebody help. I just got my mi max 2 with China Rom pre-installed and rooted it by unlocking bootloader and flashing twrp. Now my phone is rooted. On my search for installing Viper4android I came across this thread.
Can someone explain step by step on how I can install viper4android on my phone using this particular idea (divine beats flashing coz I don't understand how to search for it).
Hoping to learn more on this forum.
Thanks
Telegram
this is a official telegram link for viper4arise (a.k.a viper4android) https://t.me/joinchat/AAAAAEItMnhsCBOoelTXMw
if some has a link for dobly atmos to work on oreo,please fill me in
I don't think it is possible with a software patch. There may have been some hardware elements involved with the SGS9 Dolby Atmos sound.
iceepyon said:
I don't think it is possible with a software patch. There may have been some hardware elements involved with the SGS9 Dolby Atmos sound.
Click to expand...
Click to collapse
did they found a way?
here you go dolby by me for all roms
https://drive.google.com/file/d/1x_vtiX1J00i915hChbx7a0oB-0bDYNBb/view?usp=sharing
Flash by twrp recovery
Regards
DJrAZ
alex393 said:
here you go dolby by me for all roms
https://drive.google.com/file/d/1x_vtiX1J00i915hChbx7a0oB-0bDYNBb/view?usp=sharing
Flash by twrp recovery
Regards
DJrAZ
Click to expand...
Click to collapse
For all samsung oreo?
alex393 said:
here you go dolby by me for all roms
https://drive.google.com/file/d/1x_vtiX1J00i915hChbx7a0oB-0bDYNBb/view?usp=sharing
Flash by twrp recovery
Regards
DJrAZ
Click to expand...
Click to collapse
how does this work?, the zip is a dolby fix not dolby zip itself. so do i need to flash dolby and then this fix for dolby?
does it work on note 8 F oreo?, please help.
Hey man I believe that if you have the F variant that Magisk for sure has a Oreo compatible Atmos zip. I know for a fact due to having a SD variant Note 3 w/TWRP and Magisk. Prior to getting the module, I couldn't figure out wtf was the issue either lol. Actually more upsetting at the time , but yeah my man not sure if you're rooted on Magisk, but if so it's right there under the modules section. Btw the UI on the 8.0 &up is MUCH improved visually (IMO) than those of lesser versions of android. Hope that helps man.
http://forum.xda-developers.com/android/software/app-dolby-atmos-axon-7-oreo-port-t3740508
didnt working give me a guide on samsung oreo roms
All the things related to mods, can be found in the apropiate section, if you can not find anything there, most probably it does not exist, just dont insist in this section
Hi i search a module of Dolby Atmos for boost the volume work on android 11 plz?
Thanks
don't have my FE yet but I believe Dolby Atmos is already in the stock rom unless I've got my wires crossed somehow.
You are correct. Rather nice mod, which you can control if you want, (like on off, just for games etc.) Oh, plus it does come with its Own EQ....
izimen said:
Hi i search a module of Dolby Atmos for boost the volume work on android 11 plz?
Thanks
Click to expand...
Click to collapse
yeah don't give up your search, I don't think much of the Atmos that comes with this phone. search here for threads and don't just rely on magisk.
godofsalt said:
You are correct. Rather nice mod, which you can control if you want, (like on off, just for games etc.) Oh, plus it does come with its Own EQ....
Click to expand...
Click to collapse
Hi sir ..i need too this dolby atmos without root apk for Android 11.
Please share whats working on android 11.
Zeshan13356 said:
Hi sir ..i need too this dolby atmos without root apk for Android 11.
Please share whats working on android 11.
Click to expand...
Click to collapse
he was talking about a system app that's included in OneUI, in all likelihood it wouldn't work as a user install.
Zeshan13356 said:
Hi sir ..i need too this dolby atmos without root apk for Android 11.
Please share whats working on android 11.
Click to expand...
Click to collapse
AS Mr. 3mel had mentioned, it is a factory install app. It is not a User installed app. Can only say that, since I really don't know what you are trying to do or accomplish! Hope I have given you the Info you are looking for...