Related
Guys, I get it. The atrix HD is an old phone and by making this thread I am digging up the past, but I've searched everywhere on this site and still don't have an answer. First of all before you read this, please note that I am very new to this flashing business and don't understand a lot of the tech lingo you guys use all over this forum. Excuse me for being stupid.
The problem I am having is that every time I try to reboot into cwm recovery, it takes me to a screen that I will include a screenshot of down below.
Before I started any of this, I rooted my phone using towelroot, unlocked my boatloader (I think) using motopocalypse's file.
I then downloaded CWM 6.0.4.4. Recovery for the Atrix HD . I then used the app Flashify (yes I know. I'm dumb) to backup my stuff such as my kernel and all that and then tried to install the .IMG file from my SD card. It downloaded and then asked me if I wanted to reboot. I clicked yes and then it went on this screen that said something about recovery failure and it gave me status code 0. I'll post the picture don't worry. I tried using the ROM manager app to install cwm but it did the exact same thing
Guys I know I'm not very good at this, but could someone please explain to me how to flash a custom recovery without a computer on the Atrix HD? And please include simple small steps, because I'm not the smartest at this crap. Also if you could not use so much tech lingo that would be greatly appreciated.
Thanks guys
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sinlesstitan said:
Guys, I get it. The atrix HD is an old phone and by making this thread I am digging up the past, but I've searched everywhere on this site and still don't have an answer. First of all before you read this, please note that I am very new to this flashing business and don't understand a lot of the tech lingo you guys use all over this forum. Excuse me for being stupid.
The problem I am having is that every time I try to reboot into cwm recovery, it takes me to a screen that I will include a screenshot of down below.
Click to expand...
Click to collapse
Hi
First of all, I can't see the screenshot that you posted for some reason. Could you upload it again?
Also, about your problem, if you already unlocked the bootloader, this is what you need to do:
First of all, make sure you have correctly installed the Motorola drivers. You can get them on the motorola site. You will need a computer to do this, preferably one with Windows on it.
Then, if everything is right with the drivers, turn off the phone. Then you need to press and mantain the volume-down button and then press and mantain the power button. Mantain both buttons pressed until you see a dark screen with some letters on it. Make sure it reads somewhere "Bootloader UNLOCKED". If it does, you are doing great.
Next, check the file that I uploaded. As you can see, it has your name on it and it's a .zip file. You will need to extract the content, preferably on a new folder on the root of your drive (Assuming you are using Windows, that would be C:/nameofthefolder/).
Next, you will need to open a console window. There are many ways to do it, but you can search for it on Windows. When you find the icon (a black one), right clic and use "Run as administrator". Then you need to navigate to the folder in which you saved the files. In the console, type "cd .." and press enter until you get to the root of the drive, then "cd nameofthefolder" to get there.
Now, to the good part. If your phone is still in fastboot mode (the black screen with white letters), you will type the following in the console and press enter: "fastboot flash recovery philz_touch_6.43.4-moto_msm8960.img" without the "". What this will do is send a flash command to your phone and it will flash the recovery indicated. It will show some message and then in about 4 seconds it will be done. And that's it. If it doesn't works or it says that it can't find "fastboot" or something, make sure you are in the right folder.
To enter the recovery, turn off the phone, press volume-up button and power button, mantain both until you see a purple screen with some options. That's the recovery. And from there, you can install a zip, a new ROM, and do some nice things, but be careful.
If you have any other inquiry, let me know.
mauchito said:
Hi
First of all, I can't see the screenshot that you posted for some reason. Could you upload it again?
Also, about your problem, if you already unlocked the bootloader, this is what you need to do:
First of all, make sure you have correctly installed the Motorola drivers. You can get them on the motorola site. You will need a computer to do this, preferably one with Windows on it.
Then, if everything is right with the drivers, turn off the phone. Then you need to press and mantain the volume-down button and then press and mantain the power button. Mantain both buttons pressed until you see a dark screen with some letters on it. Make sure it reads somewhere "Bootloader UNLOCKED". If it does, you are doing great.
Next, check the file that I uploaded. As you can see, it has your name on it and it's a .zip file. You will need to extract the content, preferably on a new folder on the root of your drive (Assuming you are using Windows, that would be C:/nameofthefolder/).
Next, you will need to open a console window. There are many ways to do it, but you can search for it on Windows. When you find the icon (a black one), right clic and use "Run as administrator". Then you need to navigate to the folder in which you saved the files. In the console, type "cd .." and press enter until you get to the root of the drive, then "cd nameofthefolder" to get there.
Now, to the good part. If your phone is still in fastboot mode (the black screen with white letters), you will type the following in the console and press enter: "fastboot flash recovery philz_touch_6.43.4-moto_msm8960.img" without the "". What this will do is send a flash command to your phone and it will flash the recovery indicated. It will show some message and then in about 4 seconds it will be done. And that's it. If it doesn't works or it says that it can't find "fastboot" or something, make sure you are in the right folder.
To enter the recovery, turn off the phone, press volume-up button and power button, mantain both until you see a purple screen with some options. That's the recovery. And from there, you can install a zip, a new ROM, and do some nice things, but be careful.
If you have any other inquiry, let me know.
Click to expand...
Click to collapse
Thanks for replying man it really means a lot. I will definitely try this later today and I'll let you know if I run into any problems. Also, I sent you a private message with a link to the picture on it, due to the fact I'm new here, xda developers won't let me post pictures on a thread yet.
Sinlesstitan said:
Thanks for replying man it really means a lot. I will definitely try this later today and I'll let you know if I run into any problems. Also, I sent you a private message with a link to the picture on it, due to the fact I'm new here, xda developers won't let me post pictures on a thread yet.
Click to expand...
Click to collapse
I just saw your screenshot. It looks like your bootloader is still locked. It must say "UNLOCKED" for you to install a custom recovery. There is a thread around here to do that, I honestly don't remember how to do it since I did it like 2 years ago, but search on this forum and you will find it. In case you can't unlock your bootloader, let me know and we'll see what we can do.
Look the image that I just uploaded. This is what you are looking for. This is how it should say. Note that it says "Device is UNLOCKED. Status Code: 3". Yours says "LOCKED".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is my first walkthrough so I will do my best to do this properly. The Honor Note 8 does not have a forum yet, and this is the third thread for this phone. Hopefully we can get a forum up soon.
PLEASE NOTE THAT UNLOCKING BOOTLOADER WILL WIPE YOUR DEVICE AND POSSIBLY VOID YOUR WARRENTY!!!
I'M NOT RESPONSIBLE IF SOMETHING DOESN'T WORK.
Unlock Bootloader
Follow the steps here to begin the Bootloader Unlock process:
https://www.dc-unlocker.com/how-to-read-huawei-bootloader-unlock-code
1. a) Install the application
1. b) Follow the steps on the above page to put phone into "Manufacture Mode"
1. c) Under "Select Manufacturer", choose "Huawei Phones" and under "Select Model", choose the model of your phone
1. d) Click on "Buy Credits". You should end up being emailed a username and password, return to the Unlocker Client, and input those two
1. e) The Unlocker Client should return the bootloader unlock code
2. a) Enable Developer Options by clicking on the build number multiple times
2. b) Turn on USB Debugging
3. Prepare TWRP custom recovery before preceeding further. You can get it from here: https://drive.google.com/open?id=0B4xzs81XsmURVTRnUDJHdl9CQlE
3. Prepare and install ADB and Fastboot tools. I used this one http://forum.xda-developers.com/showthread.php?t=2588979
4. Go into the folder with your recovery and open a CMD (if you used system-wide ADB as linked above, otherwise place recovery in your ADB folder)
5. Put the phone into Bootloader mode with:
Code:
adb reboot bootloader
. This will take you to the bootloader mode (white screen with some small text)
6. Now type:
Code:
fastboot oem unlock <UNLOCK_CODE>
where
Code:
<UNLOCK_CODE>
is the bootloader code that the Unlocker Client gave you
Loading TWRP Custom Recovery
7. Your phone may reboot when the process is complete. We want to go back into Bootloader mode, so follow Step 5 again to go back to bootloader mode
8. Now type:
Code:
fastboot flash recovery <NAME_OF_YOUR_RECOVERY.img>
The recovery will flash over to your device. We want to reboot into the recovery mode.
9. Now type:
Code:
fastboot reboot
but just before you hit ENTER on that command, start holding VOLup and VOLdown at the same time (as explained below)
This phone has two recoveries on it, which is great since it makes it really hard to brick. In order to access custom recovery, you need to hold down both VOL buttons during boot process (from the very beginning) in order to access the custom recovery.
Once you have entered TWRP, you will most likely notice that it is in CHINESE. If you don't read chinese, follow the steps below to change to English UI in TWRP:
Change to English UI in TWRP
10. TWRP has two columns of 4 buttons, 8 buttons total. I have labeled the buttons as per their position as below:
1 2
3 4
5 6
7 8
11. Click button 6 to go to the Settings, then click on the "Globe" icon, then switch to english and click the button in the bottom right corner.
BACKUP!!
12. I highly recommend you now do a TWRP backup and place the backup on an External SD card (not the internal memory). This will save your ass if you mess anything up or it doesn't work for you. Do a full backup (select ALL of the options).
Installing Xposed
Grab the Installer APK here: http://forum.xda-developers.com/showthread.php?t=3034811
and the Framework zip here: http://dl-xda.xposed.info/framework/sdk23/arm64/
Put both files onto your SD card.
13. Boot into your rom, install the APK file (you may need to enable "unknown sources")
14. Then boot back into TWRP. Do this by restarting the phone, and just as the screen goes black, hold down both VOL buttons until you see text on the screen.
15. Install the framework, wipe cache/dalvik and reboot the phone
ROMs
There are several roms, all of which can be found here: http://forum.xda-developers.com/general/general/huawei-honor-note-8-roms-t3487575
I will try to update this post with instructions on how to install them once I have the process down properly.
Thanks to:
@benmeroff for his posting of all of those ROMs and his work on the original thread.
The link to the xposed installer is dead
jdantow said:
Installing Xposed
Grab the Installer APK here: http://forum.xda-developers.com/show....php?t=3034811
Click to expand...
Click to collapse
Just another small reminder this Xposed apk link is broken. Could I just download any Xposed apk or was this link for a specific version for the Note 8?
Thanks
remix435 said:
The link to the xposed installer is dead
Click to expand...
Click to collapse
Thank you! I updated the link, can you confirm it is working now from your end? Thanks so much!
The thread ID is 3034811 so if you take
Code:
http://forum.xda-developers.com/showthread.php
and add
Code:
?t=3034811
it should work for you
jlomein said:
Just another small reminder this Xposed apk link is broken. Could I just download any Xposed apk or was this link for a specific version for the Note 8?
Thanks
Click to expand...
Click to collapse
Thank you! I updated the link, can you confirm it is working now from your end? Thanks so much!
The thread ID is 3034811 so if you take
Code:
http://forum.xda-developers.com/showthread.php
and add
Code:
?t=3034811
it should work for you
Hopefully either a camera port or a camera hack can come about from developing. Anybody know about possible camera hack thats the only thing (IMO) this phone needs
jdantow said:
Thank you! I updated the link, can you confirm it is working now from your end? Thanks so much!
Click to expand...
Click to collapse
Thanks, downloaded Xposed 3.1.1 apk from that link now.
Cheers
hi
after i flashed trwp and did back up i stuck in bootloop
tried to flash kingvip rom - no luck. tried to recover from back up but stil in boot loop.
can anyone help me, please
Anyone happen to have the img for the modem? I believe mine may be corrupted.
hi i will my boodloader unlock my Note 8. The phone will not unlock. I have the ulock key. I hvae the Build Nummber B027.
Hi guys, a question...
The is no way I can install this drivers that are required... if I click the setup icons nothing happens at all, and if i try manually all i get is 4x "Android device" in the device manager, and locating drivers in the designated folders does not help, it still says "windows did not find the driver for your device...."
Anyone maybe had a similar problem/solution?
Thanksss
Bubreg said:
Hi guys, a question...
The is no way I can install this drivers that are required... if I click the setup icons nothing happens at all, and if i try manually all i get is 4x "Android device" in the device manager, and locating drivers in the designated folders does not help, it still says "windows did not find the driver for your device...."
Anyone maybe had a similar problem/solution?
Thanksss
Click to expand...
Click to collapse
Just google huawei drivers.... I had the same question but when i installed HiSuite the drivers was inside - it work fine, but it will always pop up when you connecting phone...
falc1 said:
Just google huawei drivers.... I had the same question but when i installed HiSuite the drivers was inside - it work fine, but it will always pop up when you connecting phone...
Click to expand...
Click to collapse
Thank you man, worked like a charm! I got the bootloader code... but since it's gonna wipe everything if I unlock it, I'm gonna wait until the next weekend most probably, too busy these days.
Hi guys,
i was able to unlock the bootloader but i can't flash the recovery and every time i try it display "remote: command not allowed".
Good morning.
I hope for Christmas to be a holder of Honor Note 8.
To unlock the bootloader you need to pay 4 euro through dc-unlocker.com program?
Thank you
m3sari0 said:
Hi guys,
i was able to unlock the bootloader but i can't flash the recovery and every time i try it display "remote: command not allowed".
Click to expand...
Click to collapse
Same thing happend to me
I relocked the bootloader then unlock it again and it works
player1990 said:
Same thing happend to me
I relocked the bootloader then unlock it again and it works
Click to expand...
Click to collapse
thanks man it worked.
TWRP - changing language
OP - thank you for this thread. Was able to follow the steps and get most of the things accomplished.
One thing that i am having trouble with is - changing the TWRP language from Chinese to English. In button #6, the globe icon is not even clickable. All others are, but that one is not. Any ideas? Thanks!
EDIT: I got it to work. It seems some icons in the corners of the screen can be a little hard or slow to respond... if you (a future reader) are having the same issue - try kind of mini swiping in circles over that icon and it will eventually respond.
Hi,
I requested the unlock code on the Huawei site but I get this error:
The Huawei ID used to apply for the unlock code has not been used on the device for more than 14 days.
How can I do?
Some might apply to me
MarkAndroid said:
Hi,
I requested the unlock code on the Huawei site but I get this error:
The Huawei ID used to apply for the unlock code has not been used on the device for more than 14 days.
How can I do?
Some might apply to me
Click to expand...
Click to collapse
You have to wait 14 days or pay for the credits on DC-unlocker app
Hello everyone,
I bricked my Z2 Pro and after hours of searching and trying to fix it by flashing stock ROM via EDL I'm desperate so I would be grateful for any help.
My Z2 came with some custom ROM from shop with 1.9 version on it without OTA so I decided to flash it with different ROM. I unlocked the bootloader, flashed TWRP and SU, but flashing Gedeon ROM via TWRP ended with an error (error code 7 or 11 if I remember correctly). So I decided to flash stock ROM following
this guide.
QFIL recognized the device correctly as Qualcomm HS-USB QDLoader 9008, but I kept receiving this error:
02:20:14: ERROR: function: sahara_rx_data:194 Unable to read packet header. Only read 0 bytes.
02:20:14: ERROR: function: sahara_main:854 Sahara protocol error
02:20:14: ERROR: function: main:265 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
So I followed this guide that recommends to use MiFlash instead of QFIL.
After few unsuccessful updates (it wasn't able to open the port) it finally finished downloading the ROM (2.0.057 ST) with this message at the end: The operation completed successfully.(0x00000000: ApplyPatch sector NUM_DISK_SECTORS-1., offset 16, value CRC32(NUM_DISK_SECTORS-1.,92), size 4)
It took about 55s.
However after I unplugged Z2 from the USB cable and hit the power button, nothing happened. Since the update the screen is off, the LED light is off. Even if I hold the power off button for one minute.
When I plugged the phone back, it was still recognized as QDloader 9008, so it is apparently stuck in the EDL mode.
I tried all stock ROMs from here multiple times with the same result. Multiple times with the "successful update" message, but nothing happens.
EDIT: Now, after few tries the of the same process it is not even updating the ROM at all. It says "Open serial port failed" and afterwards "Missing hello packet, try to recover" (I waited about 5 min, but the message didn't change).
Please help
I hope for a solution without the need to unplug the battery, but if it will be necessary, I will do it.
Thank you!
Creshaw said:
Hello everyone,
I bricked my Z2 Pro and after hours of searching and trying to fix it by flashing stock ROM via EDL I'm desperate so I would be grateful for any help.
My Z2 came with some custom ROM from shop with 1.9 version on it without OTA so I decided to flash it with different ROM. I unlocked the bootloader, flashed TWRP and SU, but flashing Gedeon ROM via TWRP ended with an error (error code 7 or 11 if I remember correctly). So I decided to flash stock ROM following
this guide.
After few unsuccessful updates (although it recognized the device correctly as Qualcomm HS-USB QDLoader 9008, it wasn't able to access it via the relevant port) it finally updated the ROM (2.0.057 ST) with successful message at the end (the flash itself took about 55s). However after I unplugged Z2 from the USB cable and hit the power button, nothing happened. The screen is off, the LED light is off. Even if I hold the power off button for one minute.
When I plugged the phone back, it was still recognized as QDloader 9008, so it is apparently stuck in the EDL mode.
I tried all stock ROMs from here multiple times with the same result. Still successful update, but nothing happens.
Please help
I hope for a solution without the need to unplug the battery, but if it will be necessary, I would do it.
Thank you!
Click to expand...
Click to collapse
Can you verify if you followed step 1.1.2.
1.1.2 If you opend QFIL swich to the FireHoseConfiguration and enter the following settings:
syedtahir16 said:
Can you verify if you followed step 1.1.2.
1.1.2 If you opend QFIL swich to the FireHoseConfiguration and enter the following settings:
Click to expand...
Click to collapse
Yes, everything step by step. I even have the same version of QFIL (QPST is build 437 instead of suggested 434 - I suppose that won't be causing any problem). I tried to reboot my PC, different USB ports, reinstall drivers (as I previously had Lenovo USB driver and before the flash I installed the ZUK driver as well as without the ZUK drivers it wasn't recognized as QDLoader).
Zukfans.eu
Btw I'm unable to sign up to zukfans.eu to place my question there as well as. It asks for CAPTCHA verification, however there is no CAPTCHA shown, only the verification question "what zuk have you ?". I filled in there 'ZUK Z2 Pro', copied the question in there etc., used 4 different broswers on 2 devices and networks, no luck. And it is not possible to log in via FB as well.
I was working on it until 4AM last night and today I completely forgot to describe the important part about MiFlash
Please see in the original post.
Thanks for your your reply!
Creshaw said:
I was working on it until 4AM last night and today I completely forgot to describe the important part about MiFlash
Please see in the original post.
Thanks for your your reply!
Click to expand...
Click to collapse
I'm not sure about Miflash. I used QFIL.
Also, I wrote a small tutorial. See if that helps:
http://zukfans.eu/community/threads...rom-zuk-z2-pro-z2121-only.57/page-8#post-7282
If you are unable to use that link. Below is an extract:
"The QFIL zip contained the ROM twice. so you can load the contents.xml from the parent folder or the other folder within the zip too.
Make sure you extract the ROM in a short part i.e. "C:\Z2Pro\
1) Firstly, the tricky part having the tool recognize the qualcomm port.
Solution: Uninstall the tool, USB drivers (i.e. Zuk drivers), any existing qualcomm drivers.
Reboot.
Install Zuk drivers.
Install the tool. (According to the guide, the tool will also install the drivers for qualcomm, but for some reason it did not)
Install the qualcomm drivers.
2) Fortunately, my phone was not bricked. So I could easily get into edl mode using "adb reboot edl"
3) While trying to get this to work, some RELINK driver was installed instead of qualcomm. Uninstall that if you see that.
4) Anyway, back to our troubleshooting. So you would think that you are all set and your qualcomm port should be recognized, but no. It failed to recognize. So try this:
Reboot PC.
Reboot Phone.
5) Now Proceed. Hopefully by now you have see your qualcomm port. Great.
6) This is the trickiest part. You need to click on the "Download Content" "IMMEDIATELY" "AS SOON AS" you hit enter on "adb reboot edl".
[Image]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7) Yay. You see very nice progress in the little progress section on QFIL. You think you'ved nailed it.. But no, you could again end up getting another error. (Unfortunately I forgot to get a screenshot). Anyway, you would see this multiple times, that the "File access is very slow"; I'm not sure if only I received that error or if it is generic.
8) When you get an error at this point. Try a different port. Luckily, I got it to work on my second attempt on another attempt.
My review on the stock ROM:
Honestly, the custom ROM installed by the seller worked way better for me. This stock ROM had a lot of chinese apps (which of course I can uninstall). But somehow, the custom ROM from the seller felt better. Luckily I had a nandroid backup and I went back to it. The only drawback apart from OTA, being on the latest etc etc is that I cannot use the heartrate sensor (which is no big deal for me).
I guess I'll wait for another AOSP or another custom ROM or probably something with Android N before I upgrade again.
Hope this helps."
Thanks for getting back to me. I remember reading this before, however I cannot apply it to the current situation (but I tried anyway).
However there is an update to share. After some time I was able to go through the full download via MiFlash as before (with the 'successful' message) and moreover, flashing via QFIL finally started to produce something promising, however at the end it showed this message (no change to the state of the phone):
View attachment 131237287087498319.log
Next try showed the same error message as before:
View attachment 131237297946525488.log
SOLVED!
Hallelujah! After many many many tries (just doing the same over and over and over) the stock ROM (2.0.048) was finally uploaded (using QFIL)!
I was trying to hold power off and/or volume buttons while and after connecting to PC just to try different things and maybe that helped as well.
If someone will experience the same issue as me, I have one advice - don't loose your faith, don't give up!
And if you are thinking about flashing via MiFlash, simply just don't.
Creshaw said:
Hallelujah! After many many many tries (just doing the same over and over and over) the stock ROM (2.0.048) was finally uploaded (using QFIL)!
I was trying to hold power off and/or volume buttons while and after connecting to PC just to try different things and maybe that helped as well.
If someone will experience the same issue as me, I have one advice - don't loose your faith, don't give up!
And if you are thinking about flashing via MiFlash, simply just don't.
Click to expand...
Click to collapse
Glad you got it figured out! Enjoy your Z2 Pro
Hello there, I'm having a similar problem that the owner of this thread had, but the difference is that the adb doesn't detects my device.
I've tried to reinstall all the drivers, and downloaded the Android SDK tools, but still doesn't works...
Any idea about what to do? The device is with the screen in black, no led blinks or anything like that, and when connected to the PC, only detrects the Qualcomm 9008 port...
Thank you in advance.
Now after some research, I found out that the "ADB interface" is not showing in Windows device manager
I tried to install it manually, but can't find a way to get it working, and after the flash, USB debugging was set on, so can't figure out what could be happening...
Is it possible it's completely dead?
Any idea?
--
Thanks to valuable help from Emmaus and DanRO from zukfans.eu I managed to render my phone operable once more and now it runs flawlessly. This recovery is a life-saver for anyone experiencing bricking or malfunction issues:
https://yadi.sk/d/DfTYl-jz3Cxg76
_The first thing to do is to enter fastboot menu (pressing vol rockers will help)
_Then you will need to unlock bootloader with the dedicated commands:
fastboot -i 0x2b4c flash unlock unlock_bootloader.img
fastboot -i 0x2b4c oem unlock-go
For noobs or newcomers: Be informed that you will need the OEM bootloader image from ZUK website through giving your credential and phone's serial number for unlocking, you can see the instructions on the forum or by googling it.
_After unlocking your bootloader you should flash the aforementioned and link-given recovery with the following commands:
fastboot -i 0x2b4c flash recovery twrp_name.img
(Replace "twrp_name" with the name of the downloaded image and without quotes)
_Once you successfully enter TWRP Recovery menu, you can either flash a TWRP-flashable file or else, by tapping reboot button you can select EDL (9008) option to open 9008 port on QPST for being able to flash any official firmware.
_Check your internal storage on flashing TWRP-flashable ROMs. In my case, after I flashed recovery and then a CM-based ROM (AICP), I saw that the phone had only a 9GB-size as internal storage. If you happen to face the same issue, just flash an official firmware on QPST, as this problem occurs due to bad partitioning, at least that is what it seems.
Ask anything for any further details.
Thanks.
Can't power off....help!
Hi all.
My Z2 Plus is old 4 day! Buyed from Gearbest, i flashed the latest stock CN Firmware with QFIL, unlocked bootloader, installed CN TWRP and flashed GizRom 1.1 from Franck076,
After this, i backupped all from TWRP and flashed Francko76 Global v7 and Mokee Official 7.1.1 for test. To return to normal use, i restored the backup GizChina Rom 1.1 and i rebooted.
DISASTER!
My Zuk Z2 screen is black, no flashing led, it's vibrate every 25/30 seconds andt there's no way that i can power off! I read so many guides to unbrick, but all say that the phone is switched off. In every tested so it continues to vibrate...
Please, help me!
Also I am Now Bricked
When Z2Pro was hung up during QFIL connection with EDL mode, It cannot but wait until battery empty because it does not reaction to the reboot with the VOL PowerBtn's switch either.
if Disassemble the Z2pro then remove buttery,maybe re-QFIL.
Anyone,want you to tell me if you know the method for reboot z2pro.whthout Disassemble it.
maofedeli said:
Hi all.
My Z2 Plus is old 4 day! Buyed from Gearbest, i flashed the latest stock CN Firmware with QFIL, unlocked bootloader, installed CN TWRP and flashed GizRom 1.1 from Franck076,
After this, i backupped all from TWRP and flashed Francko76 Global v7 and Mokee Official 7.1.1 for test. To return to normal use, i restored the backup GizChina Rom 1.1 and i rebooted.
DISASTER!
My Zuk Z2 screen is black, no flashing led, it's vibrate every 25/30 seconds andt there's no way that i can power off! I read so many guides to unbrick, but all say that the phone is switched off. In every tested so it continues to vibrate...
Please, help me!
Click to expand...
Click to collapse
Have you figured out a way?
Hi all,
received a Z2 pro, flashed with multi language rom, without OTA upgrades. When sim inserted, there was no connection to the network. After several attempts, i decided to send it back.
Ordered from another shop a new 2 ro, ( i know, very stupid to try twice) and this time, when tried to flash it from multi language rom, with an official one, it was bricked. Deep flash trick and.....
Tried several times to open HS-USB QDloader 9008 and once every 20 times it was a success. But, Sahara error all the time in qfil and hallo packet error in miflash. I'm out of ideas,.... Do you hve any?
Guys,
My ZUK Z2 Pro (bootloader unlocked) after finish loading the entire system (android) and appear the home screen, it reboots itself. When its boot it connected to PC, it does not reboot and after 5s I can remove cable and use it without problems. If the cable is in charge adapter, it also has the same problem.
Summary: I always need to turn on it connected in PC (with drivers installed) and wait 5s after finished loading all OS + startup APPs to not reboot alone. I install TWRP for good but no change to install custom ROM as it comes in loop after loading bootloader. Only ROMs that are stock, installed using QFIL works.
Do you have any idea?
Btw: I was using Mokee Rom without problems but after starting somes Frameworks apps te rom bricked out.
No 9008
Hello, i am new here and posted a reply in a different place. I think the wrong thread, so i will write here too.
I have a Zuk Z2 Pro. Unlocked bootloader, TWRP (twrp-3.2.1-0-z2_row.img) and installed several roms to try out. Then i read about a new ZUI and wanted to flash it. But, i made a mistake and now my phone is bricked. I read all about unbricking and flashing wit QFIL, but (and like others) my pc does not recognize my phone anymore. I can not work with adb (windows commands) and in QFIL i can not get the needed 9008 port. I installed all the needed stuff, but nothing.
Can someone help me out please. I already followed all the stept in some tutorials, but i get stuck with this 9008, which will not appear.
Phone does not start up. Recovery is gone, only menu with fastboot, recovery etc. is there. And the ZUI screen (from the rom i wanted to install) but the screen does not respond anymore, so i can not begin with setting the phone.
Is there a solution so i can flash with QFIL?
Or another solution?
Thanks,
Alex
Update 18-03-2018
This worked for me to get the needed 9008 port for flashing with QFIL:
- Open QFIL
- Phone must be off
- Connect usb cable to pc (not to phone yet)
- press volume up + power button and immediately connect usb cable to phone
- phone will vibrate 3 time (screen stays black/off)
- pc recognizes phone (there is this familiar sound of your pc)
- In QFIL you wil see port 9008
- just flash and wait till it's done
Off course you must have drivers etc installed on your pc, all the needed stuff for flashing. Don't forget to charge you phone.
I bricked my lenovo z2 plus, it is not booting to ROM or fastboot, it only vibrates after I hold the power button, and keeps vibrating every 10 sec, can anybody help me??
[GUIDE] Unbrick Tool for OnePlus 5 with OOS 9.0.9 & OOS 9.0.11 (Untouched full stock)
Hello Everyone !!
=>A hard bricked OP5 has nothing but a black screen (nothing ever comes on the screen, not even a boot logo), it might vibrate when a power button is pressed and held for 20 seconds, has no Recovery partition, no adb mode, and no fastboot partition (It might be a flickering OnePlus logo). The device might be detected in Linux and you might be able to even send commands to it. In Windows, the bricked OP5 should be detected as QHUSB_BULK,Unknown Device,Qualcomm something. You might have a bricked OP5 as a result of flashing a kernel meant for a different device (or a ROM meant for another device that included a kernel), tinkering with the boot logo or bootloader, or your attempt of unlocking the bootloader resulted in corrupting the boot partition. Most of the times, it is needed because OEM Unlocking is disabled, and phone can't boot and no recovery.
=>The solution for OP5 hardbrick is similar to OP3,OP3T- you just need a Qualcomm driver and a recovery package.it'll help to get out from one of the most weird state of the phone.(file is exact file from OnePlus)
METHOD
This method is easy to use and flashes OxygenOS 5.1.7 and OxygenOS 9.0.9 on your phone. It wipes all your data and restores all partitions to stock. It will work in any condition unless it is a hardware damage.
Step 1 :- DOWNLOADS :-
OOS 9.0.9: https://mega.nz/file/O4dGFI4b#mbqq8VqUiPwoN85ajTV-H2pDNccD58-ccejQnTQHIBE
OOS 9.0.11:https://mega.nz/file/ekUURaII#FPoezmYL1hPJUkb2Hf90ZqW07iEaCza6etnTPSKJOos
Step 2 :- Extract Drivers and Recovery Tool files on Desktop.
Step 3 :- If you are using Windows other than Windows XP,turn off Driver Signature Enforcement.To do so,follow this guide :- http://www.howtogeek.com/167723/how-...igned-drivers/
Step 4 :- Press the power button for 40 seconds to turn off the phone.
Step 5 :- Press only volume up button for 10 seconds and while keeping it pressed,connect your phone to PC.Keep volume up pressed till your device shows in device manager as [Unknown Device,QHUSB_BULK (under Unknown Devices) or Qualcomm HS USB ...... (under COMs and Ports)].
Step 6 :- Right Click on your device in the device manager and select Update Device Software. Choose the .inf file manually from x86 or x64 folder as the case implies and select Qualcomm 9008 from the listed devices.If you are unable to see 9008,see the end of post for various other methods to show Qualcomm 9008.
Step 7 :- When the device shows as Qualcomm 9008 ,go to the extracted Recovery Package and run the MSM Download Tool as administrator.
Step 8 :- Click start at top left corner and wait for it to finish (green text will come).
Step 9 :- Disconnect phone from PC and boot into system.
How to Make the device show as Qualcomm 9008
1.) Make sure driver signature enforcement is disabled.
2.) Try these drivers,one of them might work too :-
https://www.androidfilehost.com/?fid=24052804347799753
https://www.androidfilehost.com/?fid=24269982086990168
https://www.androidfilehost.com/?fid=24349802275800175
https://www.androidfilehost.com/?fid=24349802275800173
https://www.androidfilehost.com/?fid=24349802275800171
3.)Download this :- http://www.mediafire.com/file/4aqwyi3g1d6wc67/Qualcomm+1.00.11.rar
Keep phone disconnected from PC.
Open the folder "qc" and install the Test Certificate in the following Stores: Trusted Root, Trusted Publisher, Third-Party Root and Personal
Run the Qualcomm setup wizard (also located in the qc folder)
When completed, restart your PC again with Driver Signature Disabled. (Optional but preferred)
The driver should now automatically install. If not, go to device manager and right click "Unknown Device" and click "Update Driver" Search up the QC folder and press ok. The driver should now install.
P.S.: I found the fix for bootloader menu which was changing after flashing through this tool. Just flash the zip in the recovery from the link below after flashing the rom through this tool, and you are good to go.
Please boot your device, set it up then go back to recovery and flash this file.
https://mega.nz/file/n10kkKCQ#LmCm_TDDyZ9cdZPf2pk0mSSV1bgvZflENQG0ubl15SY
NOTE: When the tool gives the "Sahara error", DON'T DISCONNECT THE PHONE from your PC, and press vol up and power button. It maybe seem stupid as a fix but generally it works.
IMP NOTE: There is a quick update, recently I also got stuck at param processing while flashing my device. So uploading the tool which works well. Here is the link. https://mega.nz/file/C1Nw3Cyb#znHfATPuRN4rAy1ZnDO4kMcftEkQ1P6enGxRGSiBh2E
IMP NOTE: There is a quick update, the tool is updated with latest TREBLE OS.
CREDITS @vasu97 - for helping and motivating me to create this thread
@Mar-cel - for bootloader fix zip
Click thanks IF i helped you
Where did you get this file, after I restored it, the bootblock unlock menu changed, is that normal?
Yes it is normal, mine also changed. May be they changed something in latest tool
Hi! First of all, thx for this post. I am getting Error 258 when i execute the tool. I am getting " Qualcomm HS-USB QDLoader 9008" in device manager, is that right? When i'm executing the program, he begins to download cache.img, and then stop and shows me this error :T Gonna send some pics to better ilustrate it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can you help me? Thx again.
EDIT: I forgot to mention that my cellphone turns on the led, in color green, when the tool starts to running.
cidsantiago said:
Hi! First of all, thx for this post. I am getting Error 258 when i execute the tool. I am getting " Qualcomm HS-USB QDLoader 9008" in device manager, is that right? When i'm executing the program, he begins to download cache.img, and then stop and shows me this error :T Gonna send some pics to better ilustrate it.
Can you help me? Thx again.
EDIT: I forgot to mention that my cellphone turns on the led, in color green, when the tool starts to running.
Click to expand...
Click to collapse
hv u tried running this tool as administrator abd ur fone shud not turn on any of the led while flashing.. if u r on twrp try format data .. and then try flashing it thru tool.. or may be its bad download at ur side. redownload again.. and try
cidsantiago said:
Hi! First of all, thx for this post. I am getting Error 258 when i execute the tool. I am getting " Qualcomm HS-USB QDLoader 9008" in device manager, is that right? When i'm executing the program, he begins to download cache.img, and then stop and shows me this error :T Gonna send some pics to better ilustrate it.
View attachment 4445915
View attachment 4445916
Can you help me? Thx again.
EDIT: I forgot to mention that my cellphone turns on the led, in color green, when the tool starts to running.
Click to expand...
Click to collapse
Don't worry about green led light while flashing with tool its normal behavior, and about error...maybe because of bad download for sure,try attaching your phone again or check the drivers again...and look at the firs comment - seems like tool is working fine.
djnim said:
hv u tried running this tool as administrator abd ur fone shud not turn on any of the led while flashing.. if u r on twrp try format data .. and then try flashing it thru tool.. or may be its bad download at ur side. redownload again.. and try
Click to expand...
Click to collapse
Yes, i ran it as administrator. M phone was totally bricked, i only got signal in him when i connected at the PC. But i always had this error :T I downloaded it at least 5 times, and got always the same results.
vasu97 said:
Don't worry about green led light while flashing with tool its normal behavior, and about error...maybe because of bad download for sure,try attaching your phone again or check the drivers again...and look at the firs comment - seems like tool is working fine.
Click to expand...
Click to collapse
I did it all, believe me. Reinstalled the drivers multiples times, differents PCS, differents USB ports... I think it was a hardware problem.
I already sent my phone to RMA, so i think it was solved, one way or another But thanks for your replies
cidsantiago said:
Yes, i ran it as administrator. M phone was totally bricked, i only got signal in him when i connected at the PC. But i always had this error :T I downloaded it at least 5 times, and got always the same results.
I did it all, believe me. Reinstalled the drivers multiples times, differents PCS, differents USB ports... I think it was a hardware problem.
I already sent my phone to RMA, so i think it was solved, one way or another But thanks for your replies
Click to expand...
Click to collapse
ohh.. i got tensed as it is my very first thread .
best method to return sotck complete
Thanks for the clear instructions, you have just saved my phone
Dude, thanks for the guide. But kindly check your links in the post. Some are dead ( especially : the mediafire link you gave at last )
Hi
Thank you so much !
AnDrOiDnEoV said:
Dude, thanks for the guide. But kindly check your links in the post. Some are dead ( especially : the mediafire link you gave at last )
Click to expand...
Click to collapse
That's correct. The right link is this: http://www.mediafire.com/file/4aqwyi3g1d6wc67/Qualcomm+1.00.11.rar
Hi, thanks for making this guide with such clear instructions!
I've done every step according to the guide, but I keep facing this issue:
Just to clarify I did run it as administrator.
Are you going to update (5.1.2)?
esedix02 said:
Are you going to update (5.1.2)?
Click to expand...
Click to collapse
If i Get it then yes for sure
Op updated with the bootloader fix, which helps to revert to old bootloader menu.
Op updated with new tool which includes OOS 5.1.2.
Mate she worked a charm! I wasn't bricked but wanted to restore to full stock after issues with open beta rims, firmware and AOSP roms. Was the simplest way to achieve a fresh start
it downloads the ROM while flashing? Or ROM is included in given link by OP?
Hi, my wife gifted me that Chopin phone form China, after a wrong "flash and lock" global firmware now my phone is stuck on bootloader.
According to this thread:
Redmi Note 10 Pro 5G brick
Redmi Note 10 Pro 5G Chinese version with fastboot unlocked. After unsuccessful firmware. At startup, it goes into fastboot, you can load it into recovery. Wipe doesn't help. When trying to flash through fastboot MiFlashPro "FAILED (remote: 'not...
forum.xda-developers.com
I have all the files needed to setup sp flash and try to put again the Rom in the phone, which is now not unlocked and no usb debugging on.
Can someone please give me a tutorial on how to use those files? My phone still not recognised in sp flash com port, I don't know how to do.
If anyone will help me it will be so appreciated, thanks!
If you need to disable authorisation, did you run the MTK Auth Bypass tool and get the message "Protection disabled"? That's what I had to do before SP Flash Tool would flash the phone (without disconnecting it or rebooting), and I also had to set the baud rate to 921600, although that was all under Linux, and the phone was still unlocked.
it's complicated. with phone locked fastboot commands don't work. with my hold mi a3 fastboot flashing unlock command work. but with miui and mtk chipset probably it's useless. but u can try. if u boot into bootloader with mediatek driver the pc should recognize your phone also if it's blocked
1: Unzip this attached file into a folder. run it.
2: select the unlock bootloader and start, then connect you phone via usb with all three buttons pressed. (Phone must be off before connect, )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3: Your bootloader will be unlocked.
4: Close the program and re-start again, this time, select auth bypass and start, then repeat the phone connection. after at the bottom line, it show bypass ok.
from here you may flash again rom via Miflash or SPflash.
P.S: I think the file size is too big, I can not attach it here. Sorry! P.M me if you wish.
Thanks for the help, the problem I'm facing it's Auth tool cont recognise the phone, when I open the shell keep saying waiting for the device.
Driver are mtk with Libus installed, dunno.
When I restart the phone immediately have the logo then, if volume up I can log mi assistant or with volume down the bootloader screen.
Bonscia said:
Thanks for the help, the problem I'm facing it's Auth tool cont recognise the phone, when I open the shell keep saying waiting for the device.
Driver are mtk with Libus installed, dunno.
When I restart the phone immediately have the logo then, if volume up I can log mi assistant or with volume down the bootloader screen.
Click to expand...
Click to collapse
1. Check your device driver for USB, suggest you re-install the MTK usb driver.
2. First run the program, select the Auth by pass then press start.
3. Make sure phone is in "power off" state, press Vol+, Vol- and power (all three at the same time), and don't release it, plug in USB cable and wait.... Don't release these three buttons until it is Auth by pass OK.
During this process, take a look at device manager, there must be one item like portable device - USB ( Com 3). keep flashing.
sure u add reinstall mtk driver
Tried many drivers, always same result:
Driver says the device can't start. Tried to install lisbus too but no changes.
Bonscia said:
Tried many drivers, always same result:
View attachment 5499127
View attachment 5499129
Driver says the device can't start. Tried to install lisbus too but no changes.
Click to expand...
Click to collapse
you "must" remove (uninstall) the driver first then re-install the MTK usb driver again.
kirinin said:
you "must" remove (uninstall) the driver first then re-install the MTK usb driver again.
Click to expand...
Click to collapse
I did that many times, with win 10 no drivers signed mode, with many different mtk drivers but nothing was working. I'll try clean my windows and then start again with the drivers.
Bonscia said:
I did that many times, with win 10 no drivers signed mode, with many different mtk drivers but nothing was working. I'll try clean my windows and then start again with the drivers.
Click to expand...
Click to collapse
is a win10 problem that i also haved. hard to solve. u can try windows 7 via virtualbox (solved a lot of my problems in the past) or format and install a modded version of win10 (but i dont suggest this)
Virtual box looks no longer available, I'll install a fresh copy of win 7 in another partition, never give up lol
virtualbox is available for all system. i have a win7 virtualized under my linux pc, and miflash works fine. no bugs. if my tips makes you happy dont try. is not my problem, i didnt bricked my phone. i dont make things without know what i'm doing. good look. u can buy a new phone if u prefere
wetito said:
virtualbox is available for all system. i have a win7 virtualized under my linux pc, and miflash works fine. no bugs. if my tips makes you happy dont try. is not my problem, i didnt bricked my phone. i dont make things without know what i'm doing. good look. u can buy a new phone if u prefere
Click to expand...
Click to collapse
? I've just told you I've tried to download virtual box for win 10 but it's not avaible now or server was temporarily down for the download, so my only way it's to set up a fresh copy on win 7 on my pc, I can't understand your hanger answer.
kirinin said:
1: Unzip this attached file into a folder. run it.
2: select the unlock bootloader and start, then connect you phone via usb with all three buttons pressed. (Phone must be off before connect, )
View attachment 5498521
3: Your bootloader will be unlocked.
4: Close the program and re-start again, this time, select auth bypass and start, then repeat the phone connection. after at the bottom line, it show bypass ok.
View attachment 5498523
from here you may flash again rom via Miflash or SPflash.
P.S: I think the file size is too big, I can not attach it here. Sorry! P.M me if you wish.
Click to expand...
Click to collapse
Hi, can you share this Zip file with link drive or mega?
Thanks in advance
Which zip file? I have only this one
https://forum.xda-developers.com/attachments/mtk_bypass_final-rar.5444529/I
finally flashed the Rom with so flash but now the phone reboot in assistance mode sayings "NV data corrupted" I'm about to cry
Hi, I've followed your instructions, I've finally flashed the Rom into the phone, but now phone bootloop into recovery, it says "nvdata is corrupted", I've took the scatter file from the Rom folder, how to fix that problem now? Thanks.
Link with files is this, I've seen other link don't work
Redmi Note 10 Pro 5G brick
Redmi Note 10 Pro 5G Chinese version with fastboot unlocked. After unsuccessful firmware. At startup, it goes into fastboot, you can load it into recovery. Wipe doesn't help. When trying to flash through fastboot MiFlashPro "FAILED (remote: 'not...
forum.xda-developers.com
Download MTK Universal Tool V5 | MediaTek All in One Tool Latest Free
MTK Universal V5 Tool is a small MediaTek All in One Tool designed to disable user locks, bypass FRP, Auth Bypass, Format Data (user data format),
www.gadgetsdr.com
Bonscia said:
Hi, I've followed your instructions, I've finally flashed the Rom into the phone, but now phone bootloop into recovery, it says "nvdata is corrupted", I've took the scatter file from the Rom folder, how to fix that problem now? Thanks.
Click to expand...
Click to collapse
try wipe data. also u can control the active slot. try change it and reboot
Hi, finally I can install the Recovery V12.5.16.0.RKPCNXM rom and the engineering rom but have no baseband and no IMEI. Tried many times to put my IMEI codes with no luck, looks I need the mt6893 modem file to use sn writer but no way to find them on net, can someone share those files please? Thanks