Is there any good tempered glass except from original?
Στάλθηκε από το ONEPLUS A5010 μου χρησιμοποιώντας Tapatalk
teopanta1 said:
Is there any good tempered glass except from original?
Στάλθηκε από το ONEPLUS A5010 μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
yes many,but i have used 3 of them with official but all have some problem then i go without tgp with carbon bumper case
vk_singh said:
yes many,but i have used 3 of them with official but all have some problem then i go without tgp with carbon bumper case
Click to expand...
Click to collapse
Which one of the three was the "best", in your opinion? Really can't handle going without bur the original is extremely poor, responsiveness-wise
Pfeffernuss said:
Which one of the three was the "best", in your opinion? Really can't handle going without bur the original is extremely poor, responsiveness-wise
Click to expand...
Click to collapse
Oem,case u,and other all have issue.
Tried today the one from Orzly, very good quality, it's perfect
I don't know man. I've only ever owned one tempered glass screen protector. It was the original OnePlus 3D one. And i HATED it. I can't stand compromising on how an actual screen feels to the touch. I would just get a bumper case with a good protrusion over the screen so the screen doesn't touch the table when i set the phone down.
Skar3 said:
Tried today the one from Orzly, very good quality, it's perfect
Click to expand...
Click to collapse
Me too was really impressed. Touch seems fine
big_b0sss said:
Me too was really impressed. Touch seems fine
Click to expand...
Click to collapse
Does it have adhesive over the entire surface?
ChrisJ said:
Does it have adhesive over the entire surface?
Click to expand...
Click to collapse
I don't think so only the sides
I tried IVSO one - garbage. Expected better quality since it's not curved, but covers actual screen. However, it doesn't adhere on the edges. I tried another one from the pack - adhesive was missing in some spots in the center.
---------- Post added at 04:19 PM ---------- Previous post was at 04:02 PM ----------
big_b0sss said:
I don't think so only the sides
Click to expand...
Click to collapse
Do you see rainbow effect or dot matrix?
antroid88 said:
I tried IVSO one - garbage. Expected better quality since it's not curved, but covers actual screen. However, it doesn't adhere on the edges. I tried another one from the pack - adhesive was missing in some spots in the center.
---------- Post added at 04:19 PM ---------- Previous post was at 04:02 PM ----------
Do you see rainbow effect or dot matrix?
Click to expand...
Click to collapse
Nope no matrix or rainbow. It's almost perfect except for the side black bars cuts out very little bit
big_b0sss said:
Nope no matrix or rainbow. It's almost perfect except for the side black bars cuts out very little bit
Click to expand...
Click to collapse
Nice! Already ordered this one. I also ordered one from Mr.Shield. Probably will give a shot to both of them. Will post update there.
big_b0sss said:
Nope no matrix or rainbow. It's almost perfect except for the side black bars cuts out very little bit
Click to expand...
Click to collapse
Do you know if the side black bars are larger than the OnePlus Tempered Glass and are they compatible with Spigen Rugged Armor case? Thank you.
big_b0sss said:
I don't think so only the sides
Click to expand...
Click to collapse
It does have adhesive in the whole screen just like the official one. It's very good, not dot matrix, no rainbow effect... I installed yesterday and I'm very happy with it.
Sent from my OnePlus5T using XDA Labs
joaoennes said:
It does have adhesive in the whole screen just like the official one. It's very good, not dot matrix, no rainbow effect... I installed yesterday and I'm very happy with it.
Click to expand...
Click to collapse
I wasn't sure because I had rainbow effect one the sides which made me think it might have adhesive just on the sides but rainbow effect went away next day. Everything looks great except for the black bars on the sides and dust seems to be stuck on the top cut outs
---------- Post added at 11:48 PM ---------- Previous post was at 11:46 PM ----------
Ker1m said:
Do you know if the side black bars are larger than the OnePlus Tempered Glass and are they compatible with Spigen Rugged Armor case? Thank you.
Click to expand...
Click to collapse
I didn't put the official one just these therefore I can't comment. I'm using official case with the glass protector no problem so far
with all TGSPs there is dirt around the edges. the best is the protection placed on it or buy a clear film like iqshield, nillkin, invisible shield etc...
Installed Ultimate Shield tempered glass today to my 5T and feels good!
+1 for Orzly
It's full adhesive and lays down perfectly. No dot matrix, haven't noticed any sensitivity issues.
It does cut a bit off but less than a millimeter. Not really to the point where it's bothersome (IMO).
Edit: the cut off is really noticable in termux. But most apps should have a bit of padding on the sides (per Android design guidelines).
I just removed my Orzy, going naked. The side masking is 1/16" narrower than the 5t masking, so text is cut off (especially if you're off center a bit).
Just Installed Nillkin temperglass on my device.
I've been using Nillkin for past few years and it's working great.
It's not full cover but no rainbow effect, dot matrix (I preferred to have clear screen)
At first I install and have some halo effect around the edge but right now I've solved this issue.
Nillkin is still the best option for me
Related
i didn't see this posted anywhere else......
i found this on amazon.com
http://www.amazon.com/Galaxy-Bumper...&redirect=true&ref_=oh_aui_detailpage_o00_s00
gotta say i was impressed, but when u apply it, u need to put it on straight, not at an angle, or the buttons wont align properly.
included some pics
I always contemplated that case but I had 2 concerns 1) does it affect your reception while on and 2) would it lift a rear screen protector
azelaya said:
I always contemplated that case but I had 2 concerns 1) does it affect your reception while on and 2) would it lift a rear screen protector
Click to expand...
Click to collapse
my reception seems the same, and i don't have a rear screen protector, just a front... and my front one is a case friendly armorsuit currently. i was just glad it wasnt one of those fake bumpers that actually just have a clear back on em.
I purchased that one from Amazon and another from AliExpress with a slightly different design. Verizon is my carrier and both cases negatively affected my reception, by 20 or so dBm. In my office this is the difference between being able to get 4G over 3G...and at home it knocks a bar off. Additionally the GPS/Compass seems to be occasionally affected. Since installation Waze (I use daily) occasionally loses compass direction when the car stops. The map will spin, recalculate, and then correct once I get moving again.
Outside of that they look and feel great. They add just enough width that I'm not accidentally touching the edge screen when I'm putting down and picking up my phone.
I would like to keep using mine, because of that Im going to start cutting slots into the frame where I believe the antenna's are to see if receptions improves. If I ruin the bumper or reception does not improve, no big loss...the one from Aliexpress cost me 10 bucks shipped.
---------- Post added at 12:00 PM ---------- Previous post was at 11:45 AM ----------
Here is a link to a video reviewing the one that I purchased. This isn't my channel, buts its how I found the bumper. The link to buy on Aliexpress in in the description of the video.
https://youtu.be/Z1ItJbhxZWY
azelaya said:
I always contemplated that case but I had 2 concerns 1) does it affect your reception while on and 2) would it lift a rear screen protector
Click to expand...
Click to collapse
I have a DBrands Carbon skin on the back of my phone and it fits just fine. Looks pretty awesome actually =)
I'd like to see a Rhinoshield bumper case; had one for my note 5 and it was awesome
cmart4 said:
I'd like to see a Rhinoshield bumper case; had one for my note 5 and it was awesome
Click to expand...
Click to collapse
I've never seen those before, they look pretty nice. I went ahead and emailed them, they have one for the S7, maybe one for the Edge is in the works?
@mixxxk can you comment on the "case friendliness" of that protector? I'm considering switching to it from the Zagg HD Dry since it interferes with some of my favorite cases.
Sent from my SM-G935F using Tapatalk
theROMinator said:
@mixxxk can you comment on the "case friendliness" of that protector? I'm considering switching to it from the Zagg HD Dry since it interferes with some of my favorite cases.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
I know you asked Mixxk, but it turns out I'm using the same protector. I'ved used it with this bumper and with Vena's vArmor case and had no issues with it lifting.
http://amzn.com/B01ACXSKAG
SJUnion said:
I know you asked Mixxk, but it turns out I'm using the same protector. I'ved used it with this bumper and with Vena's vArmor case and had no issues with it lifting.
http://amzn.com/B01ACXSKAG
Click to expand...
Click to collapse
The above link is correct, after what seems like I've tried a million protectors, company's started releasing "case friendly" variants... the best IMO is the armorsuit or iq shield. No lifting or peeling. I used a hair dryer to help the healing process and left it case free overnight.
theROMinator said:
@mixxxk can you comment on the "case friendliness" of that protector? I'm considering switching to it from the Zagg HD Dry since it interferes with some of my favorite cases.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Also, here's a few pics with the Armorsuit Case Friendly version with my UAG case.
SJUnion said:
I have a DBrands Carbon skin on the back of my phone and it fits just fine. Looks pretty awesome actually =)
Click to expand...
Click to collapse
Seems it does indeed take a slight hit in signal, but bars remain the same
Got some pics of mine. Got some close ups to show the edge of the "case friendly" screen protector too.
A bumper only makes sense for some phones, but with the glass back on the S7 I think protecting the back is important.
Left Side = Without Case, Right Side = With Case
meyerweb said:
A bumper only makes sense for some phones, but with the glass back on the S7 I think protecting the back is important.
Click to expand...
Click to collapse
I agree. I purchased the bumper hoping it would make the phone easier to handle and protect the metal frame of the phone from scratches. Impact protection is not something I expect from it.
---------- Post added at 08:11 PM ---------- Previous post was at 08:10 PM ----------
mixxxk said:
Seems it does indeed take a slight hit in signal, but bars remain the same
Click to expand...
Click to collapse
Yeah I would have no problem with those results.
cmart4 said:
I'd like to see a Rhinoshield bumper case; had one for my note 5 and it was awesome
Click to expand...
Click to collapse
I heard back from Rhinoshield, it doesn't look like we will get a bumper from them. See their response below.
"Hi Ariel,
Thank you for your interest in our product.
Unfortunately, due to the s7 Edge's contoured sides, it is looking quite unlikely that we will be able to do products for it.
We hope you will one day have a phone for which we can provide the best protection there is
Have a great day.
Best regards,
Alex - Customer Service Rep.
www.evolutivelabs.com"
SJUnion said:
Got some pics of mine. Got some close ups to show the edge of the "case friendly" screen protector too.
Click to expand...
Click to collapse
what brand of bumper are you using, didn't see and logo or brand marking.
Which color bumper frame will match best for the silver Galaxy S7 Edge?
1) silver
2) Black
3) Gunmetal
4) red
Which would you choose for the silver phone?
Because so many of you replied to my post in threads I'll make my own thread so it's easier to find and more people can see it!
lordred12345 said:
Because so many of you replied to my post in threads I'll make my own thread so it's easier to find and more people can see it!
Click to expand...
Click to collapse
Really need to know if this works with cases like Otterbox or orzyl grip pro, using Otterbox now but I have ordered both orzyl tempered glass screen protector and Grip-Pro Case so need to know if they work well with this
thelostlegend said:
Really need to know if this works with cases like Otterbox or orzyl grip pro, using Otterbox now but I have ordered both orzyl tempered glass screen protector and Grip-Pro Case so need to know if they work well with this
Click to expand...
Click to collapse
I'll let you know for the grip Pro when it arrives
I have rather sweaty hands and fingerprints and smudges are always a thing for me. How is it with this protector?
acheney1990 said:
I have rather sweaty hands and fingerprints and smudges are always a thing for me. How is it with this protector?
Click to expand...
Click to collapse
It's fine! No smudges or fingerprints appear when using it
lordred12345 said:
It's fine! No smudges or fingerprints appear when using it
Click to expand...
Click to collapse
Cool. Are the edges along the sides smooth where the protector meets the phone.
acheney1990 said:
Cool. Are the edges along the sides smooth where the protector meets the phone.
Click to expand...
Click to collapse
As in?
lordred12345 said:
As in?
Click to expand...
Click to collapse
Just meaning it's smooth. Not rough.
acheney1990 said:
Just meaning it's smooth. Not rough.
Click to expand...
Click to collapse
It's 2.5D so it has the same finish as the phone.
lordred12345 said:
Because so many of you replied to my post in threads I'll make my own thread so it's easier to find and more people can see it!
Click to expand...
Click to collapse
Great video, one question is the clear part of the screen protector also bonded to the screen, reason I ask is because I bought one off eBay with a very similar design to this but the clear part had no bonding therefore leaving a 'pocket of air', this was a week ago the only thing about really.
One question where did you get the 0.24mm ?I can only find the 0.33mm thickness ,even in the official site the 0.33mm is available.
acheney1990 said:
Just meaning it's smooth. Not rough.
Click to expand...
Click to collapse
It's smooth
Panick_mg said:
One question where did you get the 0.24mm ?I can only find the 0.33mm thickness ,even in the official site the 0.33mm is available.
Click to expand...
Click to collapse
Just the one from amazon...
Does it work with the original OnePlus case? Thanks.
send from my OnePlus ³
daavid1995 said:
Does it work with the original OnePlus case? Thanks.
send from my OnePlus ³
Click to expand...
Click to collapse
Yeah it does!
Do you have a link? I found it on amazon but the pics are the 0.33 mm
Mumin said:
Great video, one question is the clear part of the screen protector also bonded to the screen, reason I ask is because I bought one off eBay with a very similar design to this but the clear part had no bonding therefore leaving a 'pocket of air', this was a week ago the only thing about really.
Click to expand...
Click to collapse
+1 is the clear part also bonded to the OP3 sreen?
Chris.nl said:
+1 is the clear part also bonded to the OP3 sreen?
Click to expand...
Click to collapse
Nope
lordred12345 said:
Nope
Click to expand...
Click to collapse
I was originally worried about it not being bonded but your video made it look good.
---------- Post added at 04:39 PM ---------- Previous post was at 04:37 PM ----------
I ordered the Orzly protector from Amazon. Got a long wait time though, End of July or early August. Where did you order from?
Did anyone find a link for the .24 mm thickness?
I found only the .33 mm thickness on sale:
http://orzly.com/orzlyr-3d-pro-fit-glass-screen-protector-for-oneplus-3.html
https://www.amazon.com/Orzly®-Pro-F...id=1467657788&sr=8-1&keywords=orzly+oneplus+3
http://www.ebay.co.uk/itm/Orzly-2-5...387109?hash=item25beb5fa65:g:bi8AAOSwvg9Xdopw
I'm looking for a good thin, clear case to use with my Dbrand skin.
The case I have now fits a little too tight and the buttons are difficult to press. Its linked below for reference.
https://smile.amazon.com/gp/aw/d/B0...1472066600&sr=1&pi=AC_SX236_SY340_FMwebp_QL65
Sent from my ONEPLUS A3000 using Tapatalk
I have a dbrand skin and this is what it looks like in and out of my case, do you like?
lordred12345 said:
I have a dbrand skin and this is what it looks like in and out of my case, do you like?
Click to expand...
Click to collapse
Thanks for the pics! How does it fit inside the case with the skin? Do the buttons function like they did without the skin, or is there a difference?
My case was great without the skin, but now the buttons are too hard to press.
Sent from my ONEPLUS A3000 using Tapatalk
biglilsteve said:
Thanks for the pics! How does it fit inside the case with the skin? Do the buttons function like they did without the skin, or is there a difference?
My case was great without the skin, but now the buttons are too hard to press.
Click to expand...
Click to collapse
I haven't noticed a difference with the case on, just be VERY careful putting it on if you don't want to damage it
lordred12345 said:
I haven't noticed a difference with the case on, just be VERY careful putting it on if you don't want to damage it
Click to expand...
Click to collapse
Did you ever use the case without the skin, or have you only used it with the skin?
Sent from my ONEPLUS A3000 using Tapatalk
biglilsteve said:
Did you ever use the case without the skin, or have you only used it with the skin?
Click to expand...
Click to collapse
Yeah I used it without the skin ?
---------- Post added at 01:03 AM ---------- Previous post was at 12:59 AM ----------
I'm about to go to bed so here are my videos on the case and skin in case you have any questions
lordred12345 said:
Yeah I used it without the skin ?
---------- Post added at 01:03 AM ---------- Previous post was at 12:59 AM ----------
I'm about to go to bed so here are my videos on the case and skin in case you have any questions
Click to expand...
Click to collapse
Thank you! I was looking at that case anyway. This is helpful [emoji4]
Sent from my ONEPLUS A3000 using Tapatalk
i have tried Orzly Clear Case and HotCool Clear Case and i feel the Orzly one is thinner and feels more like the phone and both have about the same clarity, also the buttons don't feel as stiff, i also ordered some foreign one which claims to be even thinner, i don't care much about protection i'd rather have thinner b/c its mainly to keep my dBrand Skin in tact, i will report back once i get the new one and see how it is
Bradl79 said:
i have tried Orzly Clear Case and HotCool Clear Case and i feel the Orzly one is thinner and feels more like the phone and both have about the same clarity, also the buttons don't feel as stiff, i also ordered some foreign one which claims to be even thinner, i don't care much about protection i'd rather have thinner b/c its mainly to keep my dBrand Skin in tact, i will report back once i get the new one and see how it is
Click to expand...
Click to collapse
Yeah I'm in the same boat. Just want to preserve the skin and also protect the camera hump. I ordered the orzly flex case hoping the buttons won't be stiff. If they are I'll return it.
I'll be waiting on your feedback on the one you just ordered!
Sent from my ONEPLUS A3000 using Tapatalk
biglilsteve said:
Yeah I'm in the same boat. Just want to preserve the skin and also protect the camera hump. I ordered the orzly flex case hoping the buttons won't be stiff. If they are I'll return it.
I'll be waiting on your feedback on the one you just ordered!
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
yeah the one i got was not very good at all, u can feel the seams on the side and it was frosted in the back so it was not clear, but it was only 2.00 shipped from china lol, i still like the Orzly one best so far.
Bradl79 said:
yeah the one i got was not very good at all, u can feel the seams on the side and it was frosted in the back so it was not clear, but it was only 2.00 shipped from china lol, i still like the Orzly one best so far.
Click to expand...
Click to collapse
Lol not a huge loss. I can actually feel the seams on the side of mine so I hope the orzly one feels better. Thanks again for the advice.
Sent from my ONEPLUS A3000 using Tapatalk
biglilsteve said:
Lol not a huge loss. I can actually feel the seams on the side of mine so I hope the orzly one feels better. Thanks again for the advice.
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
u can still feel the seams on the orzly, but not too bad, i think u will be pleased with it
So I got the Orzly Flexi Case and it seems literally identical to the Love Ying clear case I already had. As a result, the buttons are identically difficult to press with the phone and dbrand skin being used. Oh well. I'll just have to get used to it.
biglilsteve said:
So I got the Orzly Flexi Case and it seems literally identical to the Love Ying clear case I already had. As a result, the buttons are identically difficult to press with the phone and dbrand skin being used. Oh well. I'll just have to get used to it.
Click to expand...
Click to collapse
Mine broke in, they were a little stuff in the beginning, I am trying to find something thinner and clearer, IDC if it's plastic
Bradl79 said:
Mine broke in, they were a little stuff in the beginning, I am trying to find something thinner and clearer, IDC if it's plastic
Click to expand...
Click to collapse
Seems like the hotcool one is the thinnest available. I just wish TPU didn't yellow.
Sent from my ONEPLUS A3000 using Tapatalk
biglilsteve said:
Seems like the hotcool one is the thinnest available. I just wish TPU didn't yellow.
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
Thank u, I will try that one out
lordred12345 said:
Yeah I used it without the skin ?
---------- Post added at 01:03 AM ---------- Previous post was at 12:59 AM ----------
I'm about to go to bed so here are my videos on the case and skin in case you have any questions
Click to expand...
Click to collapse
Thanks for the video. I see you have tried a few cases. Which one overall do you like best?
I was all set on the cruzerlite case as I have one on my current LG G3 and it's been great to be fair but the orzly fusion case looks nice too. Dont want anything too bulky.
superdon said:
Thanks for the video. I see you have tried a few cases. Which one overall do you like best?
I was all set on the cruzerlite case as I have one on my current LG G3 and it's been great to be fair but the orzly fusion case looks nice too. Dont want anything too bulky.
Click to expand...
Click to collapse
Ah well I found the cruzerlite case to be quite bulky so I think the fusion is perfect for ya
biglilsteve said:
Seems like the hotcool one is the thinnest available. I just wish TPU didn't yellow.
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
i have that one too and the orzly actually feels smaller, less bulky, lighter, and buttons don't feel so stiff
Bradl79 said:
i have that one too and the orzly actually feels smaller, less bulky, lighter, and buttons don't feel so stiff
Click to expand...
Click to collapse
Wow you've been through some cases then lol. Good to know. I decided to just keep the orzly. I'll get used to it! Kind of already am.
Sent from my ONEPLUS A3000 using Tapatalk
here is screen protector that 100% fits our Xiaomi Note 4 and holes are accurate seller gives money back guarantee too, if anyone wants may order at below link
http://www.ebay.com/itm/-/152398489675?
kindly share the accessories you love and fits Xiaomi Note 4
Sounds awesome to me! I'll definitely be purchasing one come payday! I'll post a review with pics when it arrives.
jameelmemon said:
here is screen protector that 100% fits our Xiaomi Note 4 and holes are accurate seller gives money back guarantee too, if anyone wants may order at below link
http://www.ebay.com/itm/-/152398489675?
kindly share the accessories you love and fits Xiaomi Note 4
Click to expand...
Click to collapse
Have you got one? Could you post some photos of it?
Yes I got 2 of them black and white but unfortunately I can't take pictures as iam using just one phone but it is just as show in pictures in product description
Here is some pictures of full screen tempered glass applied on my RMN4, in my country it's very cheap, only 2.5$
longnt2007 said:
Here is some pictures of full screen tempered glass applied on my RMN4, in my country it's very cheap, only 2.5$
Click to expand...
Click to collapse
Thanks looks like a great fit, is that the one that was linked above?
gsmyth said:
Thanks looks like a great fit, is that the one that was linked above?
Click to expand...
Click to collapse
No, I brought it from my local shop but it should be same. Btw I don't recommend use this full screen tempered glass because many disavantages: doesn't clear like good tempered glass like Gor or Nillkin, have a tiny matrix dot under glass (for adhesion), no oleophobic coating, easy scratches on screen surface (not really 9H) or broken on screen edge (newer version have TPU material on edge and tempered glass on center)
longnt2007 said:
No, I brought it from my local shop but it should be same. Btw I don't recommend use this full screen tempered glass because many disavantages: doesn't clear like good tempered glass like Gor or Nillkin, have a tiny matrix dot under glass (for adhesion), no oleophobic coating, easy scratches on screen surface (not really 9H) or broken on screen edge (newer version have TPU material on edge and tempered glass on center)
Click to expand...
Click to collapse
Damn! It looks so well in your photos though!
I think @Wilderone ordered one like you mention, was that you? Tempered glass with a softer material at the edges to help with the 2.5d curve.
gsmyth said:
Damn! It looks so well in your photos though!
I think @Wilderone ordered one like you mention, was that you? Tempered glass with a softer material at the edges to help with the 2.5d curve.
Click to expand...
Click to collapse
Yeah, sounds like the same as what I had, I pulled mine off eventually because of the small matrix dots as described & it's quite bad in some certain lights.
I'm naked now but use a flip case anyway so it's pretty safe from drops.
Sent from my Redmi Note 4 using Tapatalk
spr33 said:
Sounds awesome to me! I'll definitely be purchasing one come payday! I'll post a review with pics when it arrives.
Click to expand...
Click to collapse
that will be great
Hey guys,
What do you think about this arc tempered glass for RN4 ? Search it on To2C. website. I am a new member and I'm restricted to post links here
I think is the best option because Arc edge and because Nillkin :laugh: I think i will order 2 pcs just in case
All the 9h sucks and don't fit! Have 2 useless already
Sent from my Redmi Note 4 using Tapatalk
Yes buddy.... I also wasted 2 temper glass (online and offline).. y the temper not fitting at the edges!.. its so irritating... Can Anyone pls provide the perfect fitting temper (2.5d).. for rn4. ... From indian websites??
Sent from my Redmi Note 4 using XDA Free mobile app
I use a note4 glass now, it fits it's very good picture and clear. It's not perfect fit but better then the so called crap they call glass for Redmi note 4... (Use itupside down) so the speaker is clear.
Sent from my Redmi Note 4 using Tapatalk
---------- Post added at 04:15 PM ---------- Previous post was at 04:09 PM ----------
Samsung *
Sent from my Redmi Note 4 using Tapatalk
this type
Sent from my Redmi Note 4 using Tapatalk
Badly needs one tempered glass
Got one minor scratch on the screen
But not noticeable
INFIN1TY- said:
this type
Click to expand...
Click to collapse
Bro we are talking about Redmi Note 4 not Samsung Note 4
jameelmemon said:
here is screen protector that 100% fits our Xiaomi Note 4 and holes are accurate seller gives money back guarantee too, if anyone wants may order at below link
http://www.ebay.com/itm/-/152398489675?
kindly share the accessories you love and fits Xiaomi Note 4
Click to expand...
Click to collapse
I ordered this screen protector and confirm that 100% fits.
Black version will be very good for white front variants to hide the bezel around the screen.
longnt2007 said:
Here is some pictures of full screen tempered glass applied on my RMN4, in my country it's very cheap, only 2.5$
Click to expand...
Click to collapse
I got the same case. Aliexpress.. Awesome Colors & Feel rubbery... I got RED for my grey phone.....
https://www.aliexpress.com/item/New...32788408704.html?spm=2114.13010608.0.0.3e70hJ
I've gotta say, after trying 3-4 other silicon/PU cases, the one from Spigen has got to be the best.
I like that there is a lip around the screen so even with a tempered glass screen protector, the phone won't rest on the screen.
juscallmemickey said:
I've gotta say, after trying 3-4 other silicon/PU cases, the one from Spigen has got to be the best.
I like that there is a lip around the screen so even with a tempered glass screen protector, the phone won't rest on the screen.
Click to expand...
Click to collapse
is it bulky?
I had a spigen case for my previous phone (Nexus 6) with a beautiful design, but I don't like the mate 10 pro spigen case design...
juscallmemickey said:
I've gotta say, after trying 3-4 other silicon/PU cases, the one from Spigen has got to be the best.
I like that there is a lip around the screen so even with a tempered glass screen protector, the phone won't rest on the screen.
Click to expand...
Click to collapse
Got to agree, good quality from Spigen as usual. Only £10 from Amazon and looks better than all the no brand cases.
Sent from my BLA-L09 using Tapatalk
IRACONDIA said:
is it bulky?
I had a spigen case for my previous phone (Nexus 6) with a beautiful design, but I don't like the mate 10 pro spigen case design...
Click to expand...
Click to collapse
Not bulky at all. Maybe a few mm more than the included clear case.
The Spigen is the one you want. Trust me.
IRACONDIA said:
is it bulky?
I had a spigen case for my previous phone (Nexus 6) with a beautiful design, but I don't like the mate 10 pro spigen case design...
Click to expand...
Click to collapse
I kinda questioned the same about the odd rectangle part around the camera. Turns out that part releases heat when it's warm while gaming etc. It's like a heat sink fin since the motherboard is around the camera. It's a bit thick but that's the point. To protect the camera and the glass back and front. It's a dust trap though so need to clean it at times especially around the camera.
So I've have my mate 10 pro for a few days, and after looking at all the cases on eBay,Amazon,ect I've settled for this spigen case, it's the most I've pumped out for a case (£13.96 delivered UK) but the all glass body has me worried
Are you guys happy with the case now it's been out a month or so?
mad.jack10 said:
So I've have my mate 10 pro for a few days, and after looking at all the cases on eBay,Amazon,ect I've settled for this spigen case, it's the most I've pumped out for a case (£13.96 delivered UK) but the all glass body has me worried
Are you guys happy with the case now it's been out a month or so?
Click to expand...
Click to collapse
Yep, very happy. Dropped the phone a couple of times and no damage done. Looks smart. No issues at all.
Sent from my BLA-L09 using Tapatalk
Mario_Wiznycia said:
Yep, very happy. Dropped the phone a couple of times and no damage done. Looks smart. No issues at all.
Click to expand...
Click to collapse
Thanks, do you use a screen protector as well?
mad.jack10 said:
Thanks, do you use a screen protector as well?
Click to expand...
Click to collapse
Yes, currently using a tempered glass screen protector from Basstopuk purchased on Amazon.
Fit isn't great to be honest, so looking about for something better.
Sent from my BLA-L09 using Tapatalk
Mario_Wiznycia said:
Yes, currently using a tempered glass screen protector from Basstopuk purchased on Amazon.
Fit isn't great to be honest, so looking about for something better.
Click to expand...
Click to collapse
Thanks again.
I've just ordered this cheap on for now
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/253285577143
But I kinda like the look of these with the black strip
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/302558296765
My spigen case arrived today, Like others have said this case is worth the money,
Its not as bulky as I expected and it feels nice in hand.
Also my little finger fits nicely in the groove where the charging port is.
mad.jack10 said:
My spigen case arrived today, Like others have said this case is worth the money,
Its not as bulky as I expected and it feels nice in hand.
Also my little finger fits nicely in the groove where the charging port is.
Click to expand...
Click to collapse
Can you share pics and links please ?
Sent from my BLA-L29 using XDA Free mobile app
---------- Post added at 18:25 ---------- Previous post was at 18:23 ----------
mad.jack10 said:
Thanks again.
I've just ordered this cheap on for now
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/253285577143
But I kinda like the look of these with the black strip
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/302558296765
Click to expand...
Click to collapse
I've got 2.5d screen glass... bad idea not cover full, small edge all around stay not stick on screen then bad display
Avoid them very bad experience on 3 models.
Full coverage : never tried on mark 10pro. But thinking about to buy on.
Sent from my BLA-L29 using XDA Free mobile app
The spigen case is available on Amazon for about £10 in the UK.
https://www.amazon.co.uk/Spigen-Res...85307&sr=8-1&keywords=Spigen+mate+10+pro+case
Sent from my SM-T810 using Tapatalk
stephane.papin said:
Can you share pics and links please ?
Sent from my BLA-L29 using XDA Free mobile app
---------- Post added at 18:25 ---------- Previous post was at 18:23 ----------
I've got 2.5d screen glass... bad idea not cover full, small edge all around stay not stick on screen then bad display
Avoid them very bad experience on 3 models.
Full coverage : never tried on mark 10pro. But thinking about to buy on.
Click to expand...
Click to collapse
Yeah the 2.5d screen protector is garbage, I wish I hadn't removed the one that Huawei fitted because the glass one is too narrow for the screen its still peeling around the edges,
Here's the link for the case ,is a UK based eBay seller
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/112704278273
Fantastic case, there is only one thing I don't like.
I can't see my beautiful blue back of the phone and in the front there is nearly nothing but display. Is there a chance of getting a transparent spigen case?