Database Develop

[ROOT] SuperSU

This thread was originally for Pixel-specific rooting instructions, but by now the SuperSU ZIP and TWRP are fully supported:
- Fastboot boot TWRP
- Install latest SuperSU ZIP (v2.79-SR3 at the time of writing)
Note that at this time I recommend against fastboot flashing TWRP. With the Pixel's new partition layout, the recovery files are inside the boot partition, and so is SuperSU. If you flash both, SuperSU's internal boot image backup will not be of the original boot image, but of TWRP. This means that neither the 'full unroot' option in SuperSU, nor incremental OTA update through FlashFire, will work as expected.
OR
- Use CF-Auto-Root for Pixel (not released at the time of writing, but should be released soon)

Thank you once again for root, do you finally get to enjoy your new Pixel?

Woooooooooooooo! I am so fricken excited for this.

can someonone please post the exact steps they are using?
I just unlocked my bootloader. then tried flashing the root-boot img file, it did the reboots, but when i complete android setup, theres no SuperSU and if i install the .apk, it still does not detect root...
just reflashed stock boot.img, locked and unlocked bootloader. waiting for instrustion.
thanks!

Here is everything you need.
spunks3 said:
can someonone please post the exact steps they are using?
I just unlocked my bootloader. then tried flashing the root-boot img file, it did the reboots, but when i complete android setup, theres no SuperSU and if i install the .apk, it still does not detect root...
just reflashed stock boot.img, locked and unlocked bootloader. waiting for instrustion.
thanks!
Click to expand...
Click to collapse
http://www.xda-developers.com/root-is-now-available-for-the-google-pixel-and-pixel-xl/
Here is everything you need.

Once again you're the man Chainfire, thanks for all your hard work
- An unnamed tester needed to do the whole thing twice for the root to stick. While I assume this was Jeff's own fault, we can never be sure. -lol
---------- Post added at 09:17 PM ---------- Previous post was at 09:14 PM ----------
spunks3 said:
can someonone please post the exact steps they are using?
I just unlocked my bootloader. then tried flashing the root-boot img file, it did the reboots, but when i complete android setup, theres no SuperSU and if i install the .apk, it still does not detect root...
just reflashed stock boot.img, locked and unlocked bootloader. waiting for instrustion.
thanks!
Click to expand...
Click to collapse
According to the post..
The images for the Pixels need to be 'fastboot boot'ed, not flashed. After a few minutes (have patience) and a couple of (automatic) reboots, Android should boot fully rooted. Read the README in the ZIP.

clockcycle said:
Once again you're the man Chainfire, thanks for all your hard work
---------- Post added at 09:17 PM ---------- Previous post was at 09:14 PM ----------
According to the post..
The images for the Pixels need to be 'fastboot boot'ed, not flashed. After a few minutes (have patience) and a couple of (automatic) reboots, Android should boot fully rooted. Read the README in the ZIP.
Click to expand...
Click to collapse
needed to set everything up and enable usb debugging - thennnn boot into bootloader and flash boot-to-root.img.
all is well!

Running just fine, thank you Chainfire!
Sent from my Pixel using Tapatalk

Worked like a charm! Thanks @Chainfire. I had just posted my pixel up for sale. Guess I'll keep it a while longer.

root issues
Pixel 32gig bought from google store unlocked bootloader and did as tutorial said, i have superSU icon but not asking for root privilage, apps saying no root?

You are the best Chainfire I've met today.
---------- Post added at 08:59 PM ---------- Previous post was at 08:58 PM ----------
mrnovanova said:
Worked like a charm! Thanks @Chainfire. I had just posted my pixel up for sale. Guess I'll keep it a while longer.
Click to expand...
Click to collapse
And I was eyeing a 5X... maybe not now!

So far when I flash EX kernel root stops working and when I reboot the phone to root it again kernel reverts back to stock. Lol! Guess I can't have both.

mrnovanova said:
So far when I flash EX kernel root stops working and when I reboot the phone to root it again kernel reverts back to stock. Lol! Guess I can't have both.
Click to expand...
Click to collapse
You're doing something wrong, it all works fine.
fastboot flash ElementalX and then fastboot boot Chainfire's boot-to-root.img

flar2 said:
You're doing something wrong, it all works fine.
fastboot flash ElementalX and then fastboot boot Chainfire's boot-to-root.img
Click to expand...
Click to collapse
Yup. It seems I was just booting the kernel image without flashing it. All good now followed directions on your last post where you say fastboot flash boot and not fastboot boot. I think that made all the difference.
Sent from my Pixel using XDA-Developers mobile app

More donations to come, after I return from Cruise

Will Xposed framework work? Or do we need to wait for twrp?

maflin18 said:
Will Xposed framework work? Or do we need to wait for twrp?
Click to expand...
Click to collapse
I'm wondering the same thing, but I'm pretty certain we need twrp. From what I understand there's a working version out there for the pixels, so it shouldn't be long before it's released.
Sent from my Pixel using XDA Labs

do i have to use fastboot boot boot-to-root.img or do i have to put it in slot a?

varun.gid said:
do i have to use fastboot boot boot-to-root.img or do i have to put it in slot a?
Click to expand...
Click to collapse
Slot a for kernel and fastboot boot boot-to-root for root worked for me.
Sent from my Pixel using XDA-Developers mobile app

maflin18 said:
Will Xposed framework work? Or do we need to wait for twrp?
Click to expand...
Click to collapse
Why ask the same question in more than one thread ?
Have you even read anything in the xposed thread ?
Your answer is in the xposed thread, not here
Sent from my Pixel using XDA-Developers mobile app

STOCK RECOVERY IMAGE FOR ZenFone MAX PRO M1 OREO .

I AM JUST SHARING THIS RECOVERY.IMG WHICH I GOT FROM THE FASTBOOT FIRMWARE .
ANYONE WHO HAS ROOTED THE UNOFFICIAL WAY AND WANTS TO FLASH BACK STOCK RECOVERY OVER TWRP OR RWR CAN FLASH THIS .
COMMAND TO FLASH VIA COMPUTER - fastboot flash recovery recovery.img
OR
FLASH DIRECTLY VIA TWRP OR RWR AND BOOT TO SEE IF IT'S FLASHED OR NOT
https://drive.google.com/file/d/1_xvKx3Fx_rhp6UEDFFe_b3zawvo9JnyB/view?usp=sharing

can you share link to the latest fastboot firmware?
---------- Post added at 01:55 PM ---------- Previous post was at 01:54 PM ----------
can you share the latest fastboot firmware?

Harry_00s.HS said:
I AM JUST SHARING THIS RECOVERY.IMG WHICH I GOT FROM THE FASTBOOT FIRMWARE .
ANYONE WHO HAS ROOTED THE UNOFFICIAL WAY AND WANTS TO FLASH BACK STOCK RECOVERY OVER TWRP OR RWR CAN FLASH THIS .
COMMAND TO FLASH VIA COMPUTER - fastboot flash recovery recovery.img
OR
FLASH DIRECTLY VIA TWRP OR RWR AND BOOT TO SEE IF IT'S FLASHED OR NOT
https://drive.google.com/file/d/1_xvKx3Fx_rhp6UEDFFe_b3zawvo9JnyB/view?usp=sharing
Click to expand...
Click to collapse
Thanks btw have u tested?
---------- Post added at 09:28 PM ---------- Previous post was at 09:27 PM ----------
austinpinto said:
can you share link to the latest fastboot firmware?
---------- Post added at 01:55 PM ---------- Previous post was at 01:54 PM ----------
can you share the latest fastboot firmware?
Click to expand...
Click to collapse
Asus website has latest rom zip ..

anisgvr said:
Thanks btw have u tested?
---------- Post added at 09:28 PM ---------- Previous post was at 09:27 PM ----------
Asus website has latest rom zip ..
Click to expand...
Click to collapse
That's recovery file .

austinpinto said:
can you share link to the latest fastboot firmware?
---------- Post added at 01:55 PM ---------- Previous post was at 01:54 PM ----------
can you share the latest fastboot firmware?
Click to expand...
Click to collapse
I'll share it need to test once .

austinpinto said:
can you share link to the latest fastboot firmware?
---------- Post added at 01:55 PM ---------- Previous post was at 01:54 PM ----------
can you share the latest fastboot firmware?
Click to expand...
Click to collapse
Following are the links for the fastboot images of Asus Zenfone Max Pro M1 aka ZB601KL(ZB602KL) Indian/ Indonesian
CSC_ZB601KL_ZB602KL_Image.zip
WW_ZB601KL(ZB602KL)_14.2016.1802.247_20180419_AFT.zip
AFT (Asus FlashTool)
FLASH AT YOUR OWN RISK!! DO NOT BLAME OP, ME or XDA.
CHEERS!!!

KangkaD said:
Following are the links for the fastboot images of Asus Zenfone Max Pro M1 aka ZB601KL(ZB602KL) Indian/ Indonesian
CSC_ZB601KL_ZB602KL_Image.zip
WW_ZB601KL(ZB602KL)_14.2016.1802.247_20180419_AFT.zip
AFT (Asus FlashTool)
FLASH AT YOUR OWN RISK!! DO NOT BLAME OP, ME or XDA.
CHEERS!!!
Click to expand...
Click to collapse
did you try it before ?

Did anyone tried it ?

Er.gajendra said:
Did anyone tried it ?
Click to expand...
Click to collapse
Tried by me itself and it was working i mean i was able to get back stock recovery .

which one to use CSC or WW Version, my bootloader is locked and stock recovery is applied.

myapky said:
which one to use CSC or WW Version, my bootloader is locked and stock recovery is applied.
Click to expand...
Click to collapse
for locked devices CSC works

process failed in fastboot. I think its for firmware, i'm on latest firmware version Version WW-14.2016.1804.305
CSC & WW posted here are on Version WW-14.2016.1802.247 by which downgrade of firmware not possible and process fails.

Bro after flashing stock recovery through TWRP ,then can I flash ota through that stock recovery..then will my bootloader will get locked or will it be unlocked
---------- Post added at 05:03 AM ---------- Previous post was at 05:01 AM ----------
Can I even flash stock rom update on a unlocked bootloader through stock recovery

Dilshantanki said:
Bro after flashing stock recovery through TWRP ,then can I flash ota through that stock recovery..then will my bootloader will get locked or will it be unlocked
Click to expand...
Click to collapse
First of all if you just flash stock rec from twrp over modified system you won't be able to flash official OTA's you need to remove the modifications from the system in order to get and flash OTA's from stock recovery .

myapky said:
process failed in fastboot. I think its for firmware, i'm on latest firmware version Version WW-14.2016.1804.305
CSC & WW posted here are on Version WW-14.2016.1802.247 by which downgrade of firmware not possible and process fails.
Click to expand...
Click to collapse
Flash full Fastboot firmware and if you want to lock bootloader and go completely stock you can do that as well .

is this stock recovery working , its from which firmware version ?

black screen
please help, getting black screen after flashing

E:couldn't load bitmap fill_ball (error -7)
Warning: No file_contexts
Supported API: 3
what is this it shows every time i boot into stock recovery menu in the left down corner of the phone= not rooted

soft brick
Oooppsss. Wrong thread

Harry_00s.HS said:
First of all if you just flash stock rec from twrp over modified system you won't be able to flash official OTA's you need to remove the modifications from the system in order to get and flash OTA's from stock recovery .
Click to expand...
Click to collapse
If i flash this recovery via twrp and locked my bootloader then can i use official ota firmware from asus website??

October update is out - QP1A.190711.148

October 2019 Release | Q 10 - Q Release 2 - QP1A.190711.148 | Open Market
https://www.essential.com/developer/current-builds

chanh2018 said:
October 2019 Release | Q 10 - Q Release 2 - QP1A.190711.148 | Open Market
https://www.essential.com/developer/current-builds
Click to expand...
Click to collapse
Won't root for me.

you mean magisk not working with this build?

mcdull said:
you mean magisk not working with this build?
Click to expand...
Click to collapse
No, it's not working for ME.
Sent from my PH-1 using XDA Labs

avd said:
Won't root for me.
Click to expand...
Click to collapse
Were you able to root the previous 10 build? I have the 148 rooted with Magisk canary, same as the previous two builds (just root, no TWRP). Not sure if it makes a difference, but I don't do OTA updates. I always download and flash the OTA image in adb sideload, then flash the patched boot.img in fastboot.

kt-Froggy said:
Were you able to root the previous 10 build? I have the 148 rooted with Magisk canary, same as the previous two builds (just root, no TWRP). Not sure if it makes a difference, but I don't do OTA updates. I always download and flash the OTA image in adb sideload, then flash the patched boot.img in fastboot.
Click to expand...
Click to collapse
oh cool, so flashing boot images work with the latest canary of MM?! will do that then this evening as well :fingers-crossed:

JimmyCash030 said:
oh cool, so flashing boot images work with the latest canary of MM?! will do that then this evening as well :fingers-crossed:
Click to expand...
Click to collapse
Yes, it does work for me. I've always been doing updates like this, on 9 and 10. Download both OTA and the full image, extract boot.img from the full image, patch it with Magisk, then sideload OTA image in adb, reboot, and finally fastboot flash the patched boot.img. Never had a problem. The only thing is that you have to use Magisk canary build with 10; stable or beta doesn't work.

kt-Froggy said:
Yes, it does work for me. I've always been doing updates like this, on 9 and 10. Download both OTA and the full image, extract boot.img from the full image, patch it with Magisk, then sideload OTA image in adb, reboot, and finally fastboot flash the patched boot.img. Never had a problem. The only thing is that you have to use Magisk canary build with 10; stable or beta doesn't work.
Click to expand...
Click to collapse
yeah worked for me as well with the latest canary MM !!

Magisk 19.4 works just fine on latest 148 build if need be I can upload magisk rooted boot. Img

https://www.androidfilehost.com/?fid=1899786940962605417
MD5:49484e6733bba257051eef831eb25689
This is for QP1A.19711.148
Magisk-Patched-Boot.img

allenjthomsen said:
https://www.androidfilehost.com/?fid=1899786940962605417
MD5:49484e6733bba257051eef831eb25689
This is for QP1A.19711.148
Magisk-Patched-Boot.img
Click to expand...
Click to collapse
getting back to the topic at hand, I flashed this, then TWRP on top of this.
Booted back into recovery.
Reflashed stock boot image.
Now I got to plug this in and swap slots to reinstall TWRP.
Is possible that magisk and twrp are back to not playing nice to each other again?
(I'll test this out if I get a chance to swap slots)
---------- Post added at 11:11 AM ---------- Previous post was at 10:49 AM ----------
avd said:
getting back to the topic at hand, i flashed this, then twrp on top of this.
Booted back into recovery.
Reflashed stock boot image.
Now i got to plug this in and swap slots to reinstall twrp.
Is possible that magisk and twrp are back to not playing nice to each other again?
(i'll test this out if i get a chance to swap slots)
Click to expand...
Click to collapse
now i'm just sitting here looking at the boot animation. Will let it go a little further to see if it starts.

Honestly i couldnt tell you i only rooted havent used twrp much yet because of the lack of android 10 custom roms havent seen a need to use it as of yet.
---------- Post added at 07:19 PM ---------- Previous post was at 07:18 PM ----------
And any further information on this would be great.

allenjthomsen said:
Honestly i couldnt tell you i only rooted havent used twrp much yet because of the lack of android 10 custom roms havent seen a need to use it as of yet.
---------- Post added at 07:19 PM ---------- Previous post was at 07:18 PM ----------
And any further information on this would be great.
Click to expand...
Click to collapse
pretty much everything for this phone resides in t.me/ESSENTIALPH1DEV

avd said:
getting back to the topic at hand, I flashed this, then TWRP on top of this.
Booted back into recovery.
Reflashed stock boot image.
Now I got to plug this in and swap slots to reinstall TWRP.
Is possible that magisk and twrp are back to not playing nice to each other again?
(I'll test this out if I get a chance to swap slots)
---------- Post added at 11:11 AM ---------- Previous post was at 10:49 AM ----------
now i'm just sitting here looking at the boot animation. Will let it go a little further to see if it starts.
Click to expand...
Click to collapse
Thou shalt always flash thy magisk last...
Even if you already had magisk... Flash it again

rignfool said:
Thou shalt always flash thy magisk last...
Even if you already had magisk... Flash it again
Click to expand...
Click to collapse
Flashing the patched image provided just sits there looking at the boot animation.
I'll play with it tonight.
It's a Sprint phone. Could that be the issue?
Sent from my PH-1 using XDA Labs

I flashed September build like this no problem however when I try and adb the October build I cannot get into recovery, when trying it just boots back into system however I can get into fastboot, any ideas?

I'm no expert but did this ans it worked:
1. In TWRP recovery (created nandroid and wiped cache)
2. Flashed full update zip from official download link, then TWRP, then wipe cache
3. Reboot system and let it settle
4. Reboot into TRWP and flashed Canary Channel zip file
5. Wipe cache
6. Reboot system
Hope this helps.

jionny said:
I flashed September build like this no problem however when I try and adb the October build I cannot get into recovery, when trying it just boots back into system however I can get into fastboot, any ideas?
Click to expand...
Click to collapse
Try using the fastboot image (not the OTA the image one) from the essential site.
Download it, remove the "fastboot or something wipe userdata maybe?" line from the flashall.bat script (or from flashall.sh if you're on Mac/Linux)
Then run the flashall.bat or flashall.sh script (again .bat for Win, .sh for the rest)
Should get you working again, albeit without root & twrp
---------- Post added at 10:55 PM ---------- Previous post was at 10:54 PM ----------
rignfool said:
Thou shalt always flash thy magisk last...
Even if you already had magisk... Flash it again
Click to expand...
Click to collapse
? I always have trouble remembering, not anymore it seems

gavinfernandes2012 said:
Try using the fastboot image (not the OTA the image one) from the essential site.
Download it, remove the "fastboot or something wipe userdata maybe?" line from the flashall.bat script (or from flashall.sh if you're on Mac/Linux)
Then run the flashall.bat or flashall.sh script (again .bat for Win, .sh for the rest)
Should get you working again, albeit without root & twrp
---------- Post added at 10:55 PM ---------- Previous post was at 10:54 PM ----------
I always have trouble remembering, not anymore it seems
Click to expand...
Click to collapse
Are you able to give more precise instructions on fastboot instructions?

jionny said:
Are you able to give more precise instructions on fastboot instructions?
Click to expand...
Click to collapse
Nevermind, got the instructions from essentials site. flashed via fastboot which erased everything had to do a complete setup again

Please Help, A2 boot loop after flash patched boot img

Hello,
I was rooted my device with magisk, after I have install Android 10 OTA the root deleted!
I'm used to flash the patched boot img from this thread and my device now won't open and it stopped on the android one screen :crying:
What can I do to solve this problem!

He doesn't even say which version it is. You should only flash the patched boot of the ROM version you have installed. E.g. V10.0.17.0 or V11.0.5.0. Check your ROM build number in phone details and search for a patched boot that matches that version.
Or patch the boot yourself, it's not that difficult.
People should learn how to patch boot themselves so they're sure about the version, instead of relying on other people. Too many errors happen, resulting in lots of bootloops.
---------- Post added at 09:33 AM ---------- Previous post was at 09:29 AM ----------
Sorry, forgot to add a word on a possible solution.
Please try to get to fastboot or EDL and flash stock ROM again, then root and patch again with correct version.

Need stock firmware

I need stock firmware for my Moto G6 XT1925-5 OPSS27.82-87-6
And compatible working and tested TWRP.
I want to reflash this Phone, and get rid bootloader unlock warning.
Any help with that?

Morricorne said:
I need stock firmware for my Moto G6 XT1925-5 OPSS27.82-87-6
And compatible working and tested TWRP.
I want to reflash this Phone, and get rid bootloader unlock warning.
Any help with that?
Click to expand...
Click to collapse
This is the signed firmware you are looking for:
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Official TWRP is available on https://eu.dl.twrp.me/ali/.
You should start with version 3.2.3-0 for your old Oreo build.
---------- Post added at 10:29 PM ---------- Previous post was at 10:22 PM ----------
Morricorne said:
I want to reflash this Phone, and get rid bootloader unlock warning.
Any help with that?
Click to expand...
Click to collapse
Try this tool for Windows
https://forum.xda-developers.com/moto-g/themes-apps/app-motorola-boot-logo-maker-source-t2848667/
In case of any problems with the tool I could repack a logo.bin with the images that you prefer.

WoKoschekk said:
This is the signed firmware you are looking for:
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Official TWRP is available on https://eu.dl.twrp.me/ali/.
You should start with version 3.2.3-0 for your old Oreo build.
Click to expand...
Click to collapse
Thanks for answear. I test this fw in next week.
Now im on official newest 9.0 for moto g6.
I find place with stock moto g6 firmware. Tried flash oldest 8.0 rom. But fastboot give me cannot downgrade message. Thats why i decided flash newest avaible fw.
I flashed official TWRP recovery for g6 too.
And try flash zip file. But i cant decrypt storage. And i have error with format data. I Just give up with remove Bootloader warning. And use stock 9.0
I dont have enough data package to download this fw. But i try this fw in future. Thanks for helpi just wanted only remove this Bootloader warning. Cause im buy this moto with already unlocked Bootloader. I have moto g5 too. With unlocked Bootloader. I replaced this warning with black moto logo. And its work. But i cant do the same thing with moto g6

Morricorne said:
Thanks for answear. I test this fw in next week.
Now im on official newest 9.0 for moto g6.
I find place with stock moto g6 firmware. Tried flash oldest 8.0 rom. But fastboot give me cannot downgrade message. Thats why i decided flash newest avaible fw.
I flashed official TWRP recovery for g6 too.
And try flash zip file. But i cant decrypt storage. And i have error with format data. I Just give up with remove Bootloader warning. And use stock 9.0
I dont have enough data package to download this fw. But i try this fw in future. Thanks for help
Click to expand...
Click to collapse
Do not downgrade from Pie to Oreo! Once Pie is installed there is no way back to Oreo.
TWRP can't decrypt /data on Moto G6. Start TWRP, don't enter a password and hit cancel. Go to "Wipe > Format Data (do not use 'Advanced'!!) > type 'yes' and swipe to confirm".
Next reboot to recovery twice!
Now /data is unencrypted and you must flash the no-verity/disable_forceencrypt.zip in order to stay unencrypted. A reboot to system without that .zip will encrypt your /data again.
---------- Post added at 10:56 PM ---------- Previous post was at 10:53 PM ----------
Flashing newest Magisk v20.4 will cause a bootloop. Use v19.3 instead and update Magisk through Magisk Manager when v19.3 is installed without any issues.

WoKoschekk said:
Do not downgrade from Pie to Oreo! Once Pie is installed there is no way back to Oreo.
TWRP can't decrypt /data on Moto G6. Start TWRP, don't enter a password and hit cancel. Go to "Wipe > Format Data (do not use 'Advanced'!!) > type 'yes' and swipe to confirm".
Next reboot to recovery twice!
Now /data is unencrypted and you must flash the no-verity/disable_forceencrypt.zip in order to stay unencrypted. A reboot to system without that .zip will encrypt your /data again.
---------- Post added at 10:56 PM ---------- Previous post was at 10:53 PM ----------
Flashing newest Magisk v20.4 will cause a bootloop. Use v19.3 instead and update Magisk through Magisk Manager when v19.3 is installed without any issues.
Click to expand...
Click to collapse
OK thanks i try this in next week

WoKoschekk said:
Do not downgrade from Pie to Oreo! Once Pie is installed there is no way back to Oreo.
TWRP can't decrypt /data on Moto G6. Start TWRP, don't enter a password and hit cancel. Go to "Wipe > Format Data (do not use 'Advanced'!!) > type 'yes' and swipe to confirm".
Next reboot to recovery twice!
Now /data is unencrypted and you must flash the no-verity/disable_forceencrypt.zip in order to stay unencrypted. A reboot to system without that .zip will encrypt your /data again.
---------- Post added at 10:56 PM ---------- Previous post was at 10:53 PM ----------
Flashing newest Magisk v20.4 will cause a bootloop. Use v19.3 instead and update Magisk through Magisk Manager when v19.3 is installed without any issues.
Click to expand...
Click to collapse
Where i can find this disable forceencrypt zip?

Morricorne said:
Where i can find this disable forceencrypt zip?
Click to expand...
Click to collapse
https://github.com/Zackptg5/Disable...Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip

WoKoschekk said:
Do not downgrade from Pie to Oreo! Once Pie is installed there is no way back to Oreo.
TWRP can't decrypt /data on Moto G6. Start TWRP, don't enter a password and hit cancel. Go to "Wipe > Format Data (do not use 'Advanced'!!) > type 'yes' and swipe to confirm".
Next reboot to recovery twice!
Now /data is unencrypted and you must flash the no-verity/disable_forceencrypt.zip in order to stay unencrypted. A reboot to system without that .zip will encrypt your /data again.
---------- Post added at 10:56 PM ---------- Previous post was at 10:53 PM ----------
Flashing newest Magisk v20.4 will cause a bootloop. Use v19.3 instead and update Magisk through Magisk Manager when v19.3 is installed without any issues.
Click to expand...
Click to collapse
Cant format data TWRP 3.3.1-0

Flashed decryption zip, magisk system start.
Can enter TWRP again.
Imei work but no Service.
Wtf?

Morricorne said:
Flashed decryption zip, magisk system start.
Can enter TWRP again.
Imei work but no Service.
Wtf?
Click to expand...
Click to collapse
It's not a decryption.zip, it's a forceencryption-disabler.
---------- Post added at 08:27 AM ---------- Previous post was at 08:20 AM ----------
I guess you don't reboot to system after flashing the stock ROM, do you?
One of the last fastboot commands was "fastboot erase userdata". The missing reboot command is the reason for your problem!

WoKoschekk said:
It's not a decryption.zip, it's a forceencryption-disabler.
---------- Post added at 08:27 AM ---------- Previous post was at 08:20 AM ----------
I guess you don't reboot to system after flashing the stock ROM, do you?
One of the last fastboot commands was "fastboot erase userdata". The missing reboot command is the reason for your problem!
Click to expand...
Click to collapse
Nope its a not compatible with android 9 version. I found this on xda
https://forum.xda-developers.com/moto-g6/help/service-root-t4004467
**** that. I reflash everything to Stock cause i dont need magisk and root. I only need get rid Bootloader Unlock warning. What i almost finished. Now i look for modified logo.bin

Morricorne said:
Nope its a not compatible with android 9 version. I found this on xda
https://forum.xda-developers.com/moto-g6/help/service-root-t4004467
**** that. I reflash everything to Stock cause i dont need magisk and root. I only need get rid Bootloader Unlock warning. What i almost finished. Now i look for modified logo.bin
Click to expand...
Click to collapse
Post a picture and I will convert it for you to a logo.bin

WoKoschekk said:
Post a picture and I will convert it for you to a logo.bin
Click to expand...
Click to collapse
I may send you original logo bin
I have this now

A resolution of 1080x2160 would be perfect.
---------- Post added at 09:44 AM ---------- Previous post was at 09:42 AM ----------
Morricorne said:
I may send you original logo bin
I have this now
Click to expand...
Click to collapse
Send it

WoKoschekk said:
A resolution of 1080x2160 would be perfect.
---------- Post added at 09:44 AM ---------- Previous post was at 09:42 AM ----------
Send it
Click to expand...
Click to collapse
Finished everything flashed. Bootlogo too. And i get ride unknown password when Phone boot too. I dont use any password. Then i dont know whats wrong. Phone ask me everytime when i reboot my device. Now this is gone. No more modding moto g6. Better is stay on stable working stock. Then cant use phone. Man what a day. Time to relax i almost throw this damn phone on the floor.