Database Develop

HTC ONE stuck on recovery

Hi,
I hvae HTC ONE after trying to install custom rom and they didn't work (status 7) but now I can't load the system it automatically boot into recovery mode, also I can't factory rest in fastboot menu. plz help

Thread moved.

You have to download a custom rom like Viper or ARHD. Notice that you have to get the right recovery to flash diffrent roms. When using ARHD you have to use TRWP 2.6.3.3 recovery!
So make sure you are using the right recovery.
Some custom roms need to flash the boot.img via command prompt / terminal

Boachti said:
You have to download a custom rom like Viper or ARHD. Notice that you have to get the right recovery to flash diffrent roms. When using ARHD you have to use TRWP 2.6.3.3 recovery!
So make sure you are using the right recovery.
Some custom roms need to flash the boot.img via command prompt / terminal
Click to expand...
Click to collapse
Thank you for your replay, Now I lost root on my recovery I can't do anything it says unable plz help

Please be more precise
Your bootloader is still unlocked?
You aren't able to acces into recovery or what ?
What rom do you currently have installed ?
And which recivery have you now installed ?
---------- Post added at 10:06 AM ---------- Previous post was at 09:57 AM ----------
http://www.joe0.com/2013/10/07/htc-one-how-to-re-root-after-4-3-ota-update/
This can help you

Boachti said:
Please be more precise
Your bootloader is still unlocked?
You aren't able to acces into recovery or what ?
What rom do you currently have installed ?
And which recivery have you now installed ?
---------- Post added at 10:06 AM ---------- Previous post was at 09:57 AM ----------
http://www.joe0.com/2013/10/07/htc-one-how-to-re-root-after-4-3-ota-update/
This can help you
Click to expand...
Click to collapse
I unlocked bootloader and Installed HD Revolution HD but after finishing the rom it says:
You lose Root, do you want to fix?
1. No
2. Yes fix
and I accidentally clicked No,
now I can't do anything in recovery because I don't have root permission and I can not load into normal system because it will restart into recovery.

Ok so it always reboot into recovery
---------- Post added at 10:35 AM ---------- Previous post was at 10:28 AM ----------
Flash your custom recovery again
Download the latest twrp recovery
http://techerrata.com/browse/twrp2/m7
This should fix it
---------- Post added at 10:43 AM ---------- Previous post was at 10:35 AM ----------
If you get asked again than chose this time yes ^^

Boachti said:
Ok so it always reboot into recovery
---------- Post added at 10:35 AM ---------- Previous post was at 10:28 AM ----------
Flash your custom recovery again
Download the latest twrp recovery
http://techerrata.com/browse/twrp2/m7
This should fix it
---------- Post added at 10:43 AM ---------- Previous post was at 10:35 AM ----------
If you get asked again than chose this time yes ^^
Click to expand...
Click to collapse
yes, now I did rebootRUU and it change to
relocked security warning tampered
what should i do?

Unlock the bootloadee again with a new unlock.bin
So you have to redo the process at http://www.htcdev.com/bootloader/
You have to use the new unlock.bin that you will receive from htcdev

Boachti said:
Unlock the bootloadee again with a new unlock.bin
So you have to redo the process at http://www.htcdev.com/bootloader/
You have to use the new unlock.bin that you will receive from htcdev
Click to expand...
Click to collapse
... no need to get unlock code again. the old one will also work fine ...

Devilish_Angel said:
... no need to get unlock code again. the old one will also work fine ...
Click to expand...
Click to collapse
No I had the situation where it didn't work

Boachti said:
No I had the situation where it didn't work
Click to expand...
Click to collapse
... well i doubt that. but its the strange world. isnt it ? ...

Devilish_Angel said:
... well i doubt that. but its the strange world. isnt it ? ...
Click to expand...
Click to collapse
Anyway it doeasn't matter ^^

How to go back to MIUI?

Hi there, I have a Mi5 device that has:
* Bootloader Unlocked & Root
* Resurrection Remix, TWRP
I am going to give this device to someone else and I want to go back to MIUI ROM, stock recovery and have the bootloader locked again. What method should I use to do that, Fastboot? Thanks.

I cannot post links, so: google for following string: "Here - Xiaomi MIUI Official Forum" and open first result
There will be an official Xiaomi fastboot flashing guide.
You will need to dowload "Xiaomi Mi 5 Latest Global Stable Version Fastboot File"
SavageDamage said:
Hi there, I have a Mi5 device that has:
* Bootloader Unlocked & Root
* Resurrection Remix, TWRP
I am going to give this device to someone else and I want to go back to MIUI ROM, stock recovery and have the bootloader locked again. What method should I use to do that, Fastboot? Thanks.
Click to expand...
Click to collapse
---------- Post added at 06:49 PM ---------- Previous post was at 06:46 PM ----------
There is an option in MiFlash tool to re-lock bootloader

serrj said:
I cannot post links, so: google for following string: "Here - Xiaomi MIUI Official Forum" and open first result
There will be an official Xiaomi fastboot flashing guide.
You will need to dowload "Xiaomi Mi 5 Latest Global Stable Version Fastboot File"
---------- Post added at 06:49 PM ---------- Previous post was at 06:46 PM ----------
There is an option in MiFlash tool to re-lock bootloader
Click to expand...
Click to collapse
Thanks for that. It worked.

Bricked P8 lite 2017

Hello guys,
this is my first thread and I have a serious problem:
First, I unlock the bootloader and flash TWRP on it. It seems working, because every time it's booting there comes a message, that I can't trust this device, cause it's unlocked.
The problem is, when i go in fastboot mode, it says "FRP locked") and in the dev-options I can't change the setting (oem unlock). Now when its connected with PC (fastboot Mode), and I try everytime to flash Data there is this error: "FAILED (remote: Command not allowed)"
So...I format all data with TWRP (no OS anymore). Now I know there is no custom ROM for this device out. I was totally fckd up.
I download the update.zip (Stock Rom update) from another Thread and unpack boot.img, recovery.img and system.img from update.app (cause I don't know how to flash it otherwise).
I tried to flash every 3 img. data with TWRP - only the boot.img and recovery.img was installed. Now my device is Bricked because of Im stupid.
So I can only try to flash data with holding vol+ and vol- and power. I also tried eRecovery, but everytime, I tells me that there was a problem by downloading the package.
The fastboot mode is useless, cause there is this bug (read above).
Can you tell me, is there a method to flash update.zip, or another way, or is this device totally broken?
Thanks!!:crying:

Which firmware you had before brick?

MobileTechArena said:
Which firmware you had before brick?
Click to expand...
Click to collapse
I think it was the EMUI 5.0.1 Version (newest) with Android 7.0

70X1C said:
I think it was the EMUI 5.0.1 Version (newest) with Android 7.0
Click to expand...
Click to collapse
PRA-LX1?

MobileTechArena said:
PRA-LX1?
Click to expand...
Click to collapse
Exacly

70X1C said:
Exacly
Click to expand...
Click to collapse
Download here rescue system file, restore that in TWRP. Then flash stock.boot.img via fastboot flash boot boot.stock.img command , then you can update to B110 OTA.
---------- Post added at 04:18 PM ---------- Previous post was at 04:15 PM ----------
To make TWRP to find rescue files, first backup recovery or something in TWRP, then TWRP will make new folder with backup files that you can raplace with files from rescue system.

MobileTechArena said:
Download here rescue system file, restore that in TWRP. Then flash stock.boot.img via fastboot flash boot boot.stock.img command , then you can update to B110 OTA.
---------- Post added at 04:18 PM ---------- Previous post was at 04:15 PM ----------
To make TWRP to find rescue files, first backup recovery or something in TWRP, then TWRP will make new folder with backup files that you can raplace with files from rescue system.
Click to expand...
Click to collapse
The problem is, that I flash the stock recovery on the device (I have no TWRP anymore)
And there is this problem with fastboot..(read above)

70X1C said:
The problem is, that I flash the stock recovery on the device (I have no TWRP anymore)
And there is this problem with fastboot..(read above)
Click to expand...
Click to collapse
Then try to put UPDATE.APP into dload and do Force update.

70X1C said:
The problem is, that I flash the stock recovery on the device (I have no TWRP anymore)
And there is this problem with fastboot..(read above)
Click to expand...
Click to collapse
Is you FRP locked? Try to unlock bootloader again, fastboot oem unlock "your unlock code". Then try to flash TWRP again. Don't bother with Dload and forced update as that doesn't work.

MobileTechArena said:
Is you FRP locked? Try to unlock bootloader again, fastboot oem unlock "your unlock code". Then try to flash TWRP again. Don't bother with Dload and forced update as that doesn't work.
Click to expand...
Click to collapse
I have no idea of the cause, but dload never worked for me too.

This only works if you can boot to Android and Developer Options menu opens for you (if they don't you'll end up with bricked device).
Boot into the Fastboot mode and relock your device (Command: "fastboot oem relock (unlock code)" ).
Then you'll be able to unlock the OEM Lock from the Developer Options menu. (And after it you can go back to Fastboot and unlock the bootloader again to reinstall the TWRP).

You still need help?

MobileTechArena said:
Download here rescue system file, restore that in TWRP. Then flash stock.boot.img via fastboot flash boot boot.stock.img command , then you can update to B110 OTA.
---------- Post added at 04:18 PM ---------- Previous post was at 04:15 PM ----------
To make TWRP to find rescue files, first backup recovery or something in TWRP, then TWRP will make new folder with backup files that you can raplace with files from rescue system.
Click to expand...
Click to collapse
Where exactly is the rescue system file? I can't seem to find it

theholycutu said:
Where exactly is the rescue system file? I can't seem to find it
Click to expand...
Click to collapse
Looks like they removed it from that site. If i find it somewhere i will share it.
.

MobileTechArena said:
Looks like they removed it from that site. If i find it somewhere i will share it.
.
Click to expand...
Click to collapse
Thanks a lot

theholycutu said:
Where exactly is the rescue system file? I can't seem to find it
Click to expand...
Click to collapse
https://mega.nz/#!k0MzQL5T!yHj-2n9DuGvb-ZdsemOgw4k3vQTMy7CJXIGFAhJlplo
Sorry I have seen the thread just before.
Please let me know when you downloaded it. I'll take it out again.

ChinHon said:
https://mega.nz/#!k0MzQL5T!yHj-2n9DuGvb-ZdsemOgw4k3vQTMy7CJXIGFAhJlplo
Sorry I have seen the thread just before.
Please let me know when you downloaded it. I'll take it out again.
Click to expand...
Click to collapse
I downloaded it thanks a lot

:good:

please help me. i also have a bricked p8 lite 2017. but i can boot into. TWRP,fastboot,system upgrade
---------- Post added at 10:15 PM ---------- Previous post was at 10:08 PM ----------
man i also have a bricked p8 lite 2017, did you solve your problem? help me please

EXE bahotin said:
please help me. i also have a bricked p8 lite 2017. but i can boot into. TWRP,fastboot,system upgrade
---------- Post added at 10:15 PM ---------- Previous post was at 10:08 PM ----------
man i also have a bricked p8 lite 2017, did you solve your problem? help me please
Click to expand...
Click to collapse
I get ERROR: 255 and I have tried a lot of options and still haven't got to any solutions.. still attempting to solve it, too

I need help sony z3+

I have the single sim version, i unlock the bootloader and install trwp, after i boot to trwp and allow sistem read, i canot boot any more the phone enters in a bootloop, i need some help, to get it back, and install trwp and get it working.

riper2510 said:
I have the single sim version, i unlock the bootloader and install trwp, after i boot to trwp and allow sistem read, i canot boot any more the phone enters in a bootloop, i need some help, to get it back, and install trwp and get it working.
Click to expand...
Click to collapse
After unlocking bootloader, you need to flash patched kernel of your phone version, else it will be bootlooped. First find out the DRM fixed patched kernel of the version you have, then flash it using fastboot commands with a computer. It just take a couple of minutes only. Patched ketnel is available for most of the versions in this page only. search for it.
---------- Post added at 10:08 AM ---------- Previous post was at 10:06 AM ----------
[email protected] said:
After unlocking bootloader, you need to flash patched kernel of your phone version, else it will be bootlooped. First find out the DRM fixed patched kernel of the version you have, then flash it using fastboot commands with a computer. It just take a couple of minutes only. Patched ketnel is available for most of the versions in this page only. search for it.
Click to expand...
Click to collapse
Check this thread for more information & help: Link

[email protected] said:
After unlocking bootloader, you need to flash patched kernel of your phone version, else it will be bootlooped. First find out the DRM fixed patched kernel of the version you have, then flash it using fastboot commands with a computer. It just take a couple of minutes only. Patched ketnel is available for most of the versions in this page only. search for it.
---------- Post added at 10:08 AM ---------- Previous post was at 10:06 AM ----------
Check this thread for more information & help: Link
Click to expand...
Click to collapse
Thanks i done it yesterday what i do?
flash stock flashtool with all wipe selection.
rebuild the kernel with drm off and patched.
test the kernel
flash the kernel with fastboot
flash trwp with fastboot
form there flash the lastest version of supersu
and voila that is

[email protected] said:
After unlocking bootloader, you need to flash patched kernel of your phone version, else it will be bootlooped. First find out the DRM fixed patched kernel of the version you have, then flash it using fastboot commands with a computer. It just take a couple of minutes only. Patched ketnel is available for most of the versions in this page only. search for it.
---------- Post added at 10:08 AM ---------- Previous post was at 10:06 AM ----------
Check this thread for more information & help: Link
Click to expand...
Click to collapse
Do you know if i can install ota ?

Need stock firmware

I need stock firmware for my Moto G6 XT1925-5 OPSS27.82-87-6
And compatible working and tested TWRP.
I want to reflash this Phone, and get rid bootloader unlock warning.
Any help with that?

Morricorne said:
I need stock firmware for my Moto G6 XT1925-5 OPSS27.82-87-6
And compatible working and tested TWRP.
I want to reflash this Phone, and get rid bootloader unlock warning.
Any help with that?
Click to expand...
Click to collapse
This is the signed firmware you are looking for:
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Official TWRP is available on https://eu.dl.twrp.me/ali/.
You should start with version 3.2.3-0 for your old Oreo build.
---------- Post added at 10:29 PM ---------- Previous post was at 10:22 PM ----------
Morricorne said:
I want to reflash this Phone, and get rid bootloader unlock warning.
Any help with that?
Click to expand...
Click to collapse
Try this tool for Windows
https://forum.xda-developers.com/moto-g/themes-apps/app-motorola-boot-logo-maker-source-t2848667/
In case of any problems with the tool I could repack a logo.bin with the images that you prefer.

WoKoschekk said:
This is the signed firmware you are looking for:
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Official TWRP is available on https://eu.dl.twrp.me/ali/.
You should start with version 3.2.3-0 for your old Oreo build.
Click to expand...
Click to collapse
Thanks for answear. I test this fw in next week.
Now im on official newest 9.0 for moto g6.
I find place with stock moto g6 firmware. Tried flash oldest 8.0 rom. But fastboot give me cannot downgrade message. Thats why i decided flash newest avaible fw.
I flashed official TWRP recovery for g6 too.
And try flash zip file. But i cant decrypt storage. And i have error with format data. I Just give up with remove Bootloader warning. And use stock 9.0
I dont have enough data package to download this fw. But i try this fw in future. Thanks for helpi just wanted only remove this Bootloader warning. Cause im buy this moto with already unlocked Bootloader. I have moto g5 too. With unlocked Bootloader. I replaced this warning with black moto logo. And its work. But i cant do the same thing with moto g6

Morricorne said:
Thanks for answear. I test this fw in next week.
Now im on official newest 9.0 for moto g6.
I find place with stock moto g6 firmware. Tried flash oldest 8.0 rom. But fastboot give me cannot downgrade message. Thats why i decided flash newest avaible fw.
I flashed official TWRP recovery for g6 too.
And try flash zip file. But i cant decrypt storage. And i have error with format data. I Just give up with remove Bootloader warning. And use stock 9.0
I dont have enough data package to download this fw. But i try this fw in future. Thanks for help
Click to expand...
Click to collapse
Do not downgrade from Pie to Oreo! Once Pie is installed there is no way back to Oreo.
TWRP can't decrypt /data on Moto G6. Start TWRP, don't enter a password and hit cancel. Go to "Wipe > Format Data (do not use 'Advanced'!!) > type 'yes' and swipe to confirm".
Next reboot to recovery twice!
Now /data is unencrypted and you must flash the no-verity/disable_forceencrypt.zip in order to stay unencrypted. A reboot to system without that .zip will encrypt your /data again.
---------- Post added at 10:56 PM ---------- Previous post was at 10:53 PM ----------
Flashing newest Magisk v20.4 will cause a bootloop. Use v19.3 instead and update Magisk through Magisk Manager when v19.3 is installed without any issues.

WoKoschekk said:
Do not downgrade from Pie to Oreo! Once Pie is installed there is no way back to Oreo.
TWRP can't decrypt /data on Moto G6. Start TWRP, don't enter a password and hit cancel. Go to "Wipe > Format Data (do not use 'Advanced'!!) > type 'yes' and swipe to confirm".
Next reboot to recovery twice!
Now /data is unencrypted and you must flash the no-verity/disable_forceencrypt.zip in order to stay unencrypted. A reboot to system without that .zip will encrypt your /data again.
---------- Post added at 10:56 PM ---------- Previous post was at 10:53 PM ----------
Flashing newest Magisk v20.4 will cause a bootloop. Use v19.3 instead and update Magisk through Magisk Manager when v19.3 is installed without any issues.
Click to expand...
Click to collapse
OK thanks i try this in next week

WoKoschekk said:
Do not downgrade from Pie to Oreo! Once Pie is installed there is no way back to Oreo.
TWRP can't decrypt /data on Moto G6. Start TWRP, don't enter a password and hit cancel. Go to "Wipe > Format Data (do not use 'Advanced'!!) > type 'yes' and swipe to confirm".
Next reboot to recovery twice!
Now /data is unencrypted and you must flash the no-verity/disable_forceencrypt.zip in order to stay unencrypted. A reboot to system without that .zip will encrypt your /data again.
---------- Post added at 10:56 PM ---------- Previous post was at 10:53 PM ----------
Flashing newest Magisk v20.4 will cause a bootloop. Use v19.3 instead and update Magisk through Magisk Manager when v19.3 is installed without any issues.
Click to expand...
Click to collapse
Where i can find this disable forceencrypt zip?

Morricorne said:
Where i can find this disable forceencrypt zip?
Click to expand...
Click to collapse
https://github.com/Zackptg5/Disable...Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip

WoKoschekk said:
Do not downgrade from Pie to Oreo! Once Pie is installed there is no way back to Oreo.
TWRP can't decrypt /data on Moto G6. Start TWRP, don't enter a password and hit cancel. Go to "Wipe > Format Data (do not use 'Advanced'!!) > type 'yes' and swipe to confirm".
Next reboot to recovery twice!
Now /data is unencrypted and you must flash the no-verity/disable_forceencrypt.zip in order to stay unencrypted. A reboot to system without that .zip will encrypt your /data again.
---------- Post added at 10:56 PM ---------- Previous post was at 10:53 PM ----------
Flashing newest Magisk v20.4 will cause a bootloop. Use v19.3 instead and update Magisk through Magisk Manager when v19.3 is installed without any issues.
Click to expand...
Click to collapse
Cant format data TWRP 3.3.1-0

Flashed decryption zip, magisk system start.
Can enter TWRP again.
Imei work but no Service.
Wtf?

Morricorne said:
Flashed decryption zip, magisk system start.
Can enter TWRP again.
Imei work but no Service.
Wtf?
Click to expand...
Click to collapse
It's not a decryption.zip, it's a forceencryption-disabler.
---------- Post added at 08:27 AM ---------- Previous post was at 08:20 AM ----------
I guess you don't reboot to system after flashing the stock ROM, do you?
One of the last fastboot commands was "fastboot erase userdata". The missing reboot command is the reason for your problem!

WoKoschekk said:
It's not a decryption.zip, it's a forceencryption-disabler.
---------- Post added at 08:27 AM ---------- Previous post was at 08:20 AM ----------
I guess you don't reboot to system after flashing the stock ROM, do you?
One of the last fastboot commands was "fastboot erase userdata". The missing reboot command is the reason for your problem!
Click to expand...
Click to collapse
Nope its a not compatible with android 9 version. I found this on xda
https://forum.xda-developers.com/moto-g6/help/service-root-t4004467
**** that. I reflash everything to Stock cause i dont need magisk and root. I only need get rid Bootloader Unlock warning. What i almost finished. Now i look for modified logo.bin

Morricorne said:
Nope its a not compatible with android 9 version. I found this on xda
https://forum.xda-developers.com/moto-g6/help/service-root-t4004467
**** that. I reflash everything to Stock cause i dont need magisk and root. I only need get rid Bootloader Unlock warning. What i almost finished. Now i look for modified logo.bin
Click to expand...
Click to collapse
Post a picture and I will convert it for you to a logo.bin

WoKoschekk said:
Post a picture and I will convert it for you to a logo.bin
Click to expand...
Click to collapse
I may send you original logo bin
I have this now

A resolution of 1080x2160 would be perfect.
---------- Post added at 09:44 AM ---------- Previous post was at 09:42 AM ----------
Morricorne said:
I may send you original logo bin
I have this now
Click to expand...
Click to collapse
Send it

WoKoschekk said:
A resolution of 1080x2160 would be perfect.
---------- Post added at 09:44 AM ---------- Previous post was at 09:42 AM ----------
Send it
Click to expand...
Click to collapse
Finished everything flashed. Bootlogo too. And i get ride unknown password when Phone boot too. I dont use any password. Then i dont know whats wrong. Phone ask me everytime when i reboot my device. Now this is gone. No more modding moto g6. Better is stay on stable working stock. Then cant use phone. Man what a day. Time to relax i almost throw this damn phone on the floor.