Any workarounds for a voip app and microphone for a rooted book color?
the cool guys that know what they are doing are working on bluetooth, that seems to be the best bet to getting a microphone working with NC, cross your fingers!
what about a wired headset with a built in mic. does the nook have the connections to support this?
I think the two best options right now for voice applications are probably the Bluetooth and the slight possibility that the micro-USB port on the Nook seems to have quite a few extra pins on it, which may have left B&N open to a proprietary connector that would allow for additional device connectivity via the micro-USB port.
I've purchased a number of micro-USB adapters in order to plug various devices into the micro-USB port of the NC, with zero success (keyboards, USB headsets, mice, etc). Clearly that port isn't currently operating in that manner, and I'm sure there's a tech savy person that could drop in and give us a simple answer to why this is.
I was also curious about the headphone port possibly have mic capabilities, and was about to purchase a single post headset to test the theory, but then I took a (very unscientific) look at the headphones jack, and it would appear that there aren't enough ring connectors inside it to support an additional channel. Obviously the guys doing the tear-down would know far more about this than myself.
We'll see what turns up over the coming months.
Found this teardown post with spec list and it says that there is no mic input in the headphone jack. I know I read another teardown post which I cannot find that indicated the same thing. I agree that our best bet may be getting the bluetooth working.
KryptoNyte39 said:
I've purchased a number of micro-USB adapters in order to plug various devices into the micro-USB port of the NC, with zero success (keyboards, USB headsets, mice, etc). Clearly that port isn't currently operating in that manner, and I'm sure there's a tech savy person that could drop in and give us a simple answer to why this is.
Click to expand...
Click to collapse
Can you detail what sort of adapters you tried? Have you tried a gender changer (type a-a female-female) on the end of the nook cord attached to a keyboard?
Someone correct me if I am wrong but, in order for the usb to do something other than just charge and connect to the PC from the usb, you would have to activate USB host, which is not turned on in stock. Hence no of the fancy toys will work. There are a lot of funky pins on the connector so it may have to be some funky adapter, assuming you get usb host running. There are a lot of hackery potential, but until that project is completed, the wait for bluetooth continues.
Go Occip! (the guy hacking the bluetooth.)
Mike
This is what I've been thinking about. I don't have the ability to figure out how to activate the USB Host function, but I read several posts about how it worked on N1, D1, and Hero.
The thing I want to try is using a micro USB to 3.5mm minijack cable like those that came with the G1. It's the only thing I could think of that could logically be supported by the default system since it was necessary in 1.5 on that device.
I don't think anyone is using VOIP yet, but you may be very interested in this thread:
http://forum.xda-developers.com/showthread.php?t=989637
I'm running the CM7 image via SD card from that thread, and the Bluetooth works, and I can connect to my phone and my headset. Several people can connect to their standalone GPS units. Worth watching.
Anyone know if the micro USB port is even powered?
On a lot of phones, the USB connectors aren't powered by the device (like my HD2), so you have to hack together a proper setup that supplies power.
Hi guys,
been a passive viewer in the xda forums for a long time but never posted anything, so be easy on me - It's my first.
I would like to connect my galaxy s i9000 to the pc screen.
I know there's the TV out option, but it involves a 3.5" to RCA cable, and pc screens don't have RCA jacks.
Does anyone know of a way to do this? and if you know what kind of cable is required that will be great.
I'm using the CM9 rom, build 17 from theam hacksung.
Just to clarify, I want to connect to phone to the PC so I can view the phone on the PC screen.
Thanks in advance
Short answer is you can't.
Longer answer is you might.
Your monitor doesn't have RCA connectors but if you have a tuner installed inside your PC, you might be able to connect it to that and then use the software that came with the tuner to display it onto your monitor.
Another method would be to use a RCA to whatever input your display has converter but they are are usually pricey and after a search for RCA to HDMI/VGA/DVI I don't think they really exist.
Even if there was a 3.5mm to HDMI/VGA/DVI cable, it wouldn't work unless the display was designed to take a PAL or NTSC signal through those types of connections.
With cm9, you need to have 3.5mm to RCA cable plugged in then go into System Settings>Advanced>TV Out. The option is greyed out when no 3.5mm to RCA cable is plugged in and the option has to be checked every time you plug the cable in.
Thanks for the reply,
I knew about the tv-out option, but didn't think about using a tuner - that might work!
Another question, do you think that a micro usb - hdmi cable might work?
I saw a while back that samsung offered such a cable that was designed for that purpose exactly.
I've searched a lot of forums but havn't got a clear answer if this actually works, not have I seen a youtube video demonstrating this.
Does anyone know if using a micro usb - hdmi cable wokrs?
jons753 said:
I knew about the tv-out option, but didn't think about using a tuner - that might work!
Click to expand...
Click to collapse
Do you know what tuner you have? I'm not sure if yours will have it but there will be a yellow plug like the ones you find on a TV.
I'm %99.9 sure that the I9000 doesn't have HDMI out through USB. It would seem a bit excessive to have two video out ports. Although you did spark an interesting subject, if someone could whip together drivers to work with something like this we could potentially have HDMI through USB but I don't see it happening any time soon.
Here's another way to view your phone through your PC: http://mymobiler.com/
Hi to everyone. Sorry if I will not be brief, but this problem makes me going crazy.
My previous phone died prematurely, so I bought a shiny Oneplus 3T and I'm very satisfied with it. Problem is, that this new piece of technology has an USB-C connector instead of the good old microUSB one.
In my car (Opel) I put an USB extension cable from the Android Auto unit (Intellilink r4.0) to the inside of the center arm, and since now I used that cable to connect my previous phone to the unit. Cable is 1.8 m long (about 5 ft for English people) and worked very well.
Now there goes the trouble: to connect my new OnePlus, I bought a simple microUSB to C adapter... it works very well at home with my PC but... Android Auto unit doesn't recognize the phone.
It says "connect the USB cable". At the same time, phone is charging, so power is connected to it.
Ok, maybe there are inconsistencies with the USB converter, I thought.
So I purchased a USB A to C cable, 1.8 m long (just like my previous normal microUSB one).
No way. Unit insists to not recognize the connection!?
Now, to cut this long thing out... I tried any combination of things, extenders, adapters... the only way to make things work is to use max a 1 m (3,3 ft) long USB A to C cable. No longer than that. Neither with a short extension cable.
But with 1 m I can't reach the center arm! I need at least 1.2/1.4 m (4-4.5 ft) cable lenght.
So, this is it. Who can be the culprit? AA head unit? Or perhaps Oneplus 3T has a "weak" USB?
I wonder if anyone has experienced issues like this... and if there are workarounds. :fingers-crossed:
jonsat said:
Hi to everyone. Sorry if I will not be brief, but this problem makes me going crazy.
My previous phone died prematurely, so I bought a shiny Oneplus 3T and I'm very satisfied with it. Problem is, that this new piece of technology has an USB-C connector instead of the good old microUSB one.
In my car (Opel) I put an USB extension cable from the Android Auto unit (Intellilink r4.0) to the inside of the center arm, and since now I used that cable to connect my previous phone to the unit. Cable is 1.8 m long (about 5 ft for English people) and worked very well.
Now there goes the trouble: to connect my new OnePlus, I bought a simple microUSB to C adapter... it works very well at home with my PC but... Android Auto unit doesn't recognize the phone.
It says "connect the USB cable". At the same time, phone is charging, so power is connected to it.
Ok, maybe there are inconsistencies with the USB converter, I thought.
So I purchased a USB A to C cable, 1.8 m long (just like my previous normal microUSB one).
No way. Unit insists to not recognize the connection!?
Now, to cut this long thing out... I tried any combination of things, extenders, adapters... the only way to make things work is to use max a 1 m (3,3 ft) long USB A to C cable. No longer than that. Neither with a short extension cable.
But with 1 m I can't reach the center arm! I need at least 1.2/1.4 m (4-4.5 ft) cable lenght.
So, this is it. Who can be the culprit? AA head unit? Or perhaps Oneplus 3T has a "weak" USB?
I wonder if anyone has experienced issues like this... and if there are workarounds. :fingers-crossed:
Click to expand...
Click to collapse
Some of the specs for USB-C cables are less than 1m, depending on what the other connection/adapter is. I guess your PC & car outlets are different specs.
See
http://www.cypress.com/knowledge-ba...ngth-cables-usb-type-c-applications-kba204034
Or maybe your cable is not certified so may be more sensitive to outside interference eg from ignition system.
Uhmmm... very interesting information. I'll try to borrow a "certified" cable. Since now, I tried with normal cables (4 different sizes and brand) to no avail (more than 1 m lenght).
Thanks!
jonsat said:
Uhmmm... very interesting information. I'll try to borrow a "certified" cable. Since now, I tried with normal cables (4 different sizes and brand) to no avail (more than 1 m lenght).
Thanks!
Click to expand...
Click to collapse
Check what is the spec of your USB outlets on car and PC, are they different? Then cable may not make any difference to your result.
I'd think that if you have a will known brand cable it would be certified. The "full feature" cables have a chip inside that the device reads, it then sends data etc to that spec. I'm not really up to date with this stuff anymore.....
By the way, my new phone is a Oneplus 3T and I discovered that has many problems with AA in general. And (perhaps) even an USB-C port not completely complying to the standard.
Still, I will try other brands of cables in search of the good one.
Thanks again
Hi,
I had exactly the same issue as you but with the One Plus 3. Had a couple of aftermarket cables (USB - A to C). Sometimes, it connected for about 1-2 minutes but then i had to disconnect and reconnect the cable. Not fun when you are driving.
Also have an Opel (2017 Astra Sports Tourer K) with the Navi900. The only way i found out to solve this issue was to use the original, red cable that comes with the phone. Since i didn't want to lose the Dash charging or, everytime carry the cable with me, i bought a second cable (1,0m) from Oneplus store.
After i did that, i never had disconnections or problems recognizing the phone. 2 weeks driving with various amount of driving time and so far, zero issues.
Also helps if you are using any battery saving apps like greenify or droid optimizer, that you whitelist the android auto app from the auto closing ( i know there's a better name for it).
Hope it helps.
Thanks for your contribution, inccubbus. I think I read a post from you in Oneplus forum, perhaps.
Fact is that 1 mt cable to me is short, I was using 2 mt with my previous phone (LG with microusb port) and no problems at all! Perhaps I may try with the new 1,5 mt red cable from Oneplus store.
But all of this is just ridicolous. Adapters won't work... in example I tried a 20 cm microusb cable with adapter to usb-c and (guess what) no connection!? I start to think that Oneplus is the culprit.
No problem mate. Sorry to hear that you need a longer cable. Before I bought the OnePlus "official" cable, I bought a total of 4 cables from different brands and lengths. 50cm, 1m, 1,8m and 2m. Total of about 60€ to find out that I needed the one cable I already had.
This is borderline ridiculous. Never tried the original because... No fast charge in the car. Duh.
Hope that the official cable works for you. Fingers crossed!
I must add that, even with a short cable, connection drops every now and then with AA freezing.
Another known Oneplus 3T issue...
One thing that occurred to me: do you also have turned on the "automatically connect with Bluetooth" option? I did a test with that option on and the cable connected and, almost like clockwork, every 3-4 minutes I'd lose the connection. Turned that option off and everything came back to"normal".
Did some research and that option is only for cars that don't have a display/Android auto compatibility so the phone screen is the interface.
Sorry if I am writing something that all knew but, in the options doesn't say anything. I was under the impression that I could "cast" the phone to the display without needing the cable. Like Chromecast
@inccubbus, I noticed that issue... but nevertheless I have trouble of disconnections even without checking "automatically connect with BT". However, I have also a BT headset, and if that BT setting is enabled it will disconnects the headset too every few minutes. AA software is very rough.
@jonsat @inccubbus
Just come across this browsing, interesting
https://www.gizmodo.com.au/2016/02/cheap-usb-c-cables-could-kill-your-phone-or-laptop/
Not sure if this will be applicable to anyone else, but just in case. I started to get connection issues between my Nexus 6p and Pioneer stereo via the cable. Tried multiple cables, but all had the same issue to differing degrees. Then realised there was some lint in the phone USB c port, so cleaned it out with a tooth pick. That seems to have fixed it.
Sent from my Nexus 6P using XDA-Developers Legacy app
IronRoo said:
@jonsat @inccubbus
Just come across this browsing, interesting
https://www.gizmodo.com.au/2016/02/cheap-usb-c-cables-could-kill-your-phone-or-laptop/
Click to expand...
Click to collapse
Yes, very interesting although not directly related to topic. Thanks anyway.
Very interesting indeed. Even though the prices of the "aftermarket" cables I purchased were even more expensive than the OnePlus originals, I see what the article mean. Most people think they are just cables but, capacitance, impedance, amperage... All of these things usually are not "copied" from the original and can cause serious damage, since they need to be "universal" and suit different brands/models with different needs.
Thanks for sharing the article! I almost see the link with the issue discussed here.
Btw, I had one random disconnection on Sunday in the final 5 minutes of a 1 hour drive.
Disconnected the cable, reconnected it and, since then, 2 hours of driving with zero disconnections. I really can't find a pattern for these things.
jonsat said:
Hi to everyone. Sorry if I will not be brief, but this problem makes me going crazy.
My previous phone died prematurely, so I bought a shiny Oneplus 3T and I'm very satisfied with it. Problem is, that this new piece of technology has an USB-C connector instead of the good old microUSB one.
In my car (Opel) I put an USB extension cable from the Android Auto unit (Intellilink r4.0) to the inside of the center arm, and since now I used that cable to connect my previous phone to the unit. Cable is 1.8 m long (about 5 ft for English people) and worked very well.
Now there goes the trouble: to connect my new OnePlus, I bought a simple microUSB to C adapter... it works very well at home with my PC but... Android Auto unit doesn't recognize the phone.
It says "connect the USB cable". At the same time, phone is charging, so power is connected to it.
Ok, maybe there are inconsistencies with the USB converter, I thought.
So I purchased a USB A to C cable, 1.8 m long (just like my previous normal microUSB one).
No way. Unit insists to not recognize the connection!?
Now, to cut this long thing out... I tried any combination of things, extenders, adapters... the only way to make things work is to use max a 1 m (3,3 ft) long USB A to C cable. No longer than that. Neither with a short extension cable.
But with 1 m I can't reach the center arm! I need at least 1.2/1.4 m (4-4.5 ft) cable lenght.
So, this is it. Who can be the culprit? AA head unit? Or perhaps Oneplus 3T has a "weak" USB?
I wonder if anyone has experienced issues like this... and if there are workarounds. :fingers-crossed:
Click to expand...
Click to collapse
I don't have a OnePlus 3T, but my phone has a USB C connection (I have a ZTE ZMax Pro) and I haven't had any issues with the connections to AA (other than USB C is harder to plug in and unplug than before). I have a couple different USB C cables - one about 3-5 feet long, and the other about one foot - and both work fine. I'd guess your cables were the culprit. Hope this worked out for you!
EDIT: Oops, didn't read the replies so I see that my post was absolutely non-helpful. Sorry!
Hello, I have an idea how we can make the current Android Auto completely WIRELESS.
Idea is as follows:
Plug a micro Dongle in the car's USB port.
The Dongle will essentially be a WiFi Tranciever. (it may need custom code/firmware etc.)
The Dongle will talk to the Android Phone over WiFi (Because Bluetooth is already being used by Android Auto).
A custom program will be running on the Android phone to send ALL USB Data to the Dongle using WiFi.
Suggested Dongle models:
Xbee, Arduino with WiFi module, any other similar board, possibly any cheap Chinese WiFi USB dongle available on Ebay/Aliexpress.
Things to consider:
The Car's infotainment must recognize the Dongle when it is plugged in as a "USB device" (not a USB Stick/Flash Drive !!!)
The Dongle may need custom code/firmware that will start sending packets to the car's infotainment as soon as it is connected/powered up/car ignition is on, in order to Emulate a phone running android auto.
In the mean time, the app running on the phone will already be connected to the Dongle and the two will be talking to each other.
I you have any other suggestions, leave a comment bellow.
PS: Such devices (USB Over the Air) are actually available on the market, but are quite bulky. We need something smaller.
But even if it is big, we can use a Micro USB plug like this one with flat cable, that will run in the Phone tray, where the board will be hidden so it will not be visible at all!!! :good::laugh:
https://www.aliexpress.com/item/4000325524998.html
Just cut the other end of the flat cable if needed and solder as necessary.
Again, if you have specific ideas/suggestions leave a comment bellow.
https://www.indiegogo.com/projects/aawireless#/