Related
Hi, guys
By my stupidity my mate s marshmallow downgrade to lolipop.Now I am in CRR-UL00185B303(Andoid 5.1.1)
I try many things to go forward ..i failed many times .even stuck my phone also(thanks my old TWRP backup ).Aalo I lost my lost my security settings..iam not able to lock the phone by pin or finger print
Any body can give any suggestion..I have one marshmallow TWRP backup ..but that fails at the end of data backup..I dont know why.If i can go back to B114 also good ,,then i can update to B146 then update to marshmallow..
Lot of thanks in advance..
Try a factory reset for finger print
All,
Please do not discuss nor recommend using someone else's TWRP backup on your device. You're just asking for a phone brick to occur.
If any further discussion arises, then this thread will be closed. No questions .
-snickler
[/COLOR]
snickler said:
All,
Please do not discuss nor recommend using someone else's TWRP backup on your device. You're just asking for a phone brick to occur.
If any further discussion arises, then this thread will be closed. No questions .
-snickler
Click to expand...
Click to collapse
With All Due Respect
I Dont think that would be the case ... i was kinda stuck on a chinese crr-L09 firmware with my model being crr-ul00 Middle east . and i used a twrp backup from a european crr-l09 and then managed to get back to my stock crr-ul00 middle east firmware :laugh:
andromodgod said:
[/COLOR]
With All Due Respect
I Dont think that would be the case ... i was kinda stuck on a chinese crr-L09 firmware with my model being crr-ul00 Middle east . and i used a twrp backup from a european crr-l09 and then managed to get back to my stock crr-ul00 middle east firmware :laugh:
Click to expand...
Click to collapse
That may be the case for certain situations, but if there's a case of many people bricking their phones over some info found on here that they think SHOULD work without it properly being tested over dozens of situations, that wouldn't be good at all.
snickler said:
That may be the case for certain situations, but if there's a case of many people bricking their phones over some info found on here that they think SHOULD work without it properly being tested over dozens of situations, that wouldn't be good at all.
Click to expand...
Click to collapse
i can´t remember where i´ve found those information. i had bookmarked the bing-translated site some time ago but then deleted it since it ended in some nonsense discussion.
it was mostly about an "update" to MM, where people tried to change the phone localization from UL00 to L09 and update to B303 but failed and then used the MM TWRP Backups of some others.
Some ended in an bootloop and others had a corrupt system with FRP lock. I couldn´t tell if this happened because of corrupted backup files or because the users f****** up the recovery process.
Bing couldn´t translate everything to make sense.
They were lucky that they made a backup of the original system and so they were able to get back a fully funktional system.
i just wanted to warn you
I was running the L09C432B303 MM Beta and tried a method to rollback to B145, it was the method where you get a B114 Full OTA and flash the system.img, recovery.img, cust.img and boot.img however it didnt work I I restored my TWRP backup, however since then my version number in settings shows as
CRR-L09C900B303
Does anyone know how to get this back to C432??
i have rollback now and its realy easy.
make fallow:
install adb
download fallow:
HuaweiUpdateExtractor and Firmware 145 (when you will update 303 too)
Bring your phone in fastboot mode (make it of and hold power down and power)
install and open Huawei Update Extractor and open the FW 145
extract fallow data:
boot.img
cust.img
recovery.img
system.img
rename it so how i have named it and flash it with adb to your Phone
fastboot flash cust cust.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
When you will stay at 145 you can make now a Hardreset in recovery mode when you will update to MM let it boot to lollipop and go to update manual / local and update your Phone with MM update.zip
when its down go to recovery and reset your phone.
Ready
wolfsstolz said:
i have rollback now and its realy easy.
make fallow:
install adb
download fallow:
HuaweiUpdateExtractor and Firmware 145 (when you will update 303 too)
Bring your phone in fastboot mode (make it of and hold power down and power)
install and open Huawei Update Extractor and open the FW 145
extract fallow data:
boot.img
cust.img
recovery.img
system.img
rename it so how i have named it and flash it with adb to your Phone
fastboot flash cust cust.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
When you will stay at 145 you can make now a Hardreset in recovery mode when you will update to MM let it boot to lollipop and go to update manual / local and update your Phone with MM update.zip
when its down go to recovery and reset your phone.
Ready
Click to expand...
Click to collapse
That isnt a rollback - you'll find that when on B145 you cant activate security settings such as fingerprint ID. All it does it allow you to reinstall MM Beta Update...nothing more
brumgav said:
I was running the L09C432B303 MM Beta and tried a method to rollback to B145, it was the method where you get a B114 Full OTA and flash the system.img, recovery.img, cust.img and boot.img however it didnt work I I restored my TWRP backup, however since then my version number in settings shows as
CRR-L09C900B303
Does anyone know how to get this back to C432??
Click to expand...
Click to collapse
Fixed.....I think my downloads were corrupting on my laptop...finally fixed by downloading full B145 firmware...extracting boot.img, recovery.img, cust.img, userdata.img, system.img using the huaweiupdateextractor tool and flashing them via fastboot, once that completed I used the same firmware to by putting in /dload/ folder and when that completed I flashed the b303 update...now my region is back to C432 and I updated to B321 version on MM
Difference?
brumgav said:
Fixed.....I think my downloads were corrupting on my laptop...finally fixed by downloading full B145 firmware...extracting boot.img, recovery.img, cust.img, userdata.img, system.img using the huaweiupdateextractor tool and flashing them via fastboot, once that completed I used the same firmware to by putting in /dload/ folder and when that completed I flashed the b303 update...now my region is back to C432 and I updated to B321 version on MM
Click to expand...
Click to collapse
That´s interesting, however anyone knows what´s the difference between C432(Europe) and C900(Global)?.
I´m asking because I updated C432B145 to MM and ended up in C900B303(now on C900B321). Only issue so far is that LTE band 4 is not working, but don´t know if it was before updating to 6.0, as I was using the phone in Europe(LTE B3/B7).
rickylambert said:
That´s interesting, however anyone knows what´s the difference between C432(Europe) and C900(Global)?.
I´m asking because I updated C432B145 to MM and ended up in C900B303(now on C900B321). Only issue so far is that LTE band 4 is not working, but don´t know if it was before updating to 6.0, as I was using the phone in Europe(LTE B3/B7).
Click to expand...
Click to collapse
Only difference I could see was more options available in mobile data settings for your data plan
hi u can help me for make to downgrade from "beta marshmallow" to "lollipop" with mate's please
maurocasto said:
hi u can help me for make to downgrade from "beta marshmallow" to "lollipop" with mate's please
Click to expand...
Click to collapse
It's not yet possible...read the forum that you're posting in
We all know about this trauma while reinstall the stock firmware or doing normal update to our phone, also we've try a lot of guides on Google and no one it's work? no problems, in this final solution I'll help you how to get device restores with worked baseband and no rebooting anymore, just sit, read carefully and apply the steps.
P.S.: if there're any similar guide feel free to remove it, I'm not sure about that.
Requirements:
TWRP 3.0.2 ( I use the one from Honor 4C which contain the option to wipe Cust partition).
Single Sim unbrick files or.
Dual Sim unbrick files. (to download the correct firmware for your variant just check Chapter 4: Unbricking.
Unlocked bootloader (you know how to do that).
Fastboot tools that you'll find inside unbrick files roms.
Balong patch: check attached files, put into phone memory in a folder called dload and flash via Local Update (do this step ONLY after flash the firmware and see BalongV100R001C50B311 or similar)
Compatible Roms:
Emui 3.1 both single and dual sim.
Emui 4.0 not tested yet, but should work.
Same thing for OTA update, in case of getting problems just download the full rom and extract
the cust partition of same installed ota version then follow steps solve reboot problems
Steps
Once the firmware is booted fine, you'll see the stock aosp background and missed applications and features which is gone, that's mean the cust partition is not flashed at 100%, here how to fix the problem.
Download the TWRP of Honor 4C (don't worry they are similar phone, tested by myself).
Rename the image to twrp.img and pust inside fastboot folder, reboot phone into fastboot mode and run fastboot flash recovery twrp.img .
Reboot into recovery, click on Wipe then choose ONLY Cust partition.
Reboot to Bootloader from Reboot menu inside recovery.
All you have to do is reflashing cust image by fastboot flash cust cust.img .
IF you see signal of sim and it operator name, your device and missed apps or features has been fixed and restored as well.
IF you see Balong bug in "Build Number" in about setting, just flash the update.app that you have to put it inside dload folder and download from attached files to resolve the problem, if you see this tutorial is helped you, just hit thank
Welcome everyone!
This thread has been created for extreme newbies/noobs and for their benefit. Not only noobs, but everyone is free to post questions and also give answers to those questions. Any type of question is allowed as long as it is related about the device. No off-topic discussions are allowed!
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
Honor 4x hanged (in some Indian kitkat version, not rooted) and after restart it is in bootloop. Honor logo appears then blue light starts to appear then restart.
Recovery mode and dload update not working.
After unlocking bootloader tried fastboot -w, still in bootloop.
Extracted Lollipop, Marshmallow, Kitkat - B161, B126 and flashed in fastboot. Possible to flash only recovery, boot, userdata & system. For others - failed : remote command not allowed. After flashing no change, still in bootloop.
Tried to boot to recovery from fastboot boot
- for lollipop and marshmallow recoveries it says "dtb not found"
- others including twrp, cm it is in bootloop.
Out of warranty.
Need help.
oppili said:
Honor 4x hanged (in some Indian kitkat version, not rooted) and after restart it is in bootloop. Honor logo appears then blue light starts to appear then restart.
Recovery mode and dload update not working.
After unlocking bootloader tried fastboot -w, still in bootloop.
Extracted Lollipop, Marshmallow, Kitkat - B161, B126 and flashed in fastboot. Possible to flash only recovery, boot, userdata & system. For others - failed : remote command not allowed. After flashing no change, still in bootloop.
Tried to boot to recovery from fastboot boot
- for lollipop and marshmallow recoveries it says "dtb not found"
- others including twrp, cm it is in bootloop.
Out of warranty.
Need help.
Click to expand...
Click to collapse
Oh ****, that seems like a frustrating situation. What made the device mess up so much? Have you gone to service centres?
Regards,
PoseidonKing
Not tried to flash or root. It just hanged while using.
Service centre said board gone (as always). MTK devices have a factory mode through which we can check working of all board parts. I did not find any way for this.
oppili said:
Not tried to flash or root. It just hanged while using.
Service centre said board gone (as always). MTK devices have a factory mode through which we can check working of all board parts. I did not find any way for this.
Click to expand...
Click to collapse
Sorry bro, can't help you out over here in this situation.... Best of Luck regarding your device. I would suggest pm'ing a forum moderator for your issue
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
HELP.!!Back to Stock Rom ????
I am struggling like anything to go back to stock rom. I am using Honor 4x Che1-L04 snapdragon. Pls send a link where can i find the instructions to do this. Or Better U expain.
EDIT:
Roll back to EMUI 4.0 success. Used the Hauwei update extractor and used CMD. Anyhow THANKS
NEW Problem:
How to enable ADOPTED STORAGE in honor 4x che1-L04 snapdragon edition.
In Xda they mentioned only about the kirin processor version.
Help!!!!!!!!!!
balongc52b311 after failing kangvip 6.7.1
hey there. will tell you my experience with failing to flashing kangvip 6.7.1 due to wiping problem
i wiped my cache, data, system even internal storage and yet failed to flashing kangvip 6.7.1 4 custom rom due to "cust" folder unable to mount giving me this:
error 1 can't mount /cust (Invalid argument)
so after failing to mount that folder and even deleting it by mistake,i got a new error:
error 1 can't mount cust no such file or directory
i lost hope and let my my honor 4x normally boot but it took too long and i was determined its stuck on bootloop :cyclops:
i woke up today finding it on 5% battery and giving me that first time setup as if all i did was a factory format BUT all in chinese. checked the build number and it was balongc52b311.
i tried mounting "cust" folder to r/w and rebooted into bootloader but it gave me the same first error. i tried deleting the folder and then rebooting into recovery and it gave me the 2nd error. created the folder "/cast" and then rebooted into recovery and it gave me the same first problem that the folder can't mount EVENTHO it was mounted successfully right before i rebooted into recovery (did this 3 times to make sure)
did some researching and found a solution for honor 4c http://forum.xda-developers.com/honor-4x/help/huawei-honor-4x-balong-hi6210sft-fixed-t3324335 or two BUT both for lolllipop and i'm marshmallow.
i'm already halfway at the method i mentioned above but i stopped after i realized it was for lollipop. i rooted my mobile and changed my build number to "Che2-L11C636B330". worth to mention that my model number remained already the same "Che2-L11".
the cust folder error is still there whenever i go to the bootloader
now i have no idea what to do, what firmware to download and if i have to downgrade first to lollipop and then upgrade to marshmallow again...
my marshmallow version was the middle east final version before this balong happened: Che2-L11C185B561 and i would like to go back to it again.. thank you in advance ( :
###*UPDATED BELOW*
fixed my problem trying the method here http://forum.xda-developers.com/honor-8/help/honor-8-rooted-twrp-modaco-rom-unable-t3462039/page2
>>>>worth to mention that i flashed my oeminfo for my UPDATE.APK REGION before flashing the extracted files from UPDATE.APP "wasn't mentioned in that method"
now i'm back to my original marshmallow version "middle east". good luck people.
abdurrahmanzaki said:
hey there. will tell you my experience with failing to flashing kangvip 6.7.1 due to wiping problem
i wiped my cache, data, system even internal storage and yet failed to flashing kangvip 6.7.1 4 custom rom due to "cust" folder unable to mount giving me this:
error 1 can't mount /cust (Invalid argument)
so after failing to mount that folder and even deleting it by mistake,i got a new error:
error 1 can't mount cust no such file or directory
i lost hope and let my my honor 4x normally boot but it took too long and i was determined its stuck on bootloop :cyclops:
i woke up today finding it on 5% battery and giving me that first time setup as if all i did was a factory format BUT all in chinese. checked the build number and it was balongc52b311.
i tried mounting "cust" folder to r/w and rebooted into bootloader but it gave me the same first error. i tried deleting the folder and then rebooting into recovery and it gave me the 2nd error. created the folder "/cast" and then rebooted into recovery and it gave me the same first problem that the folder can't mount EVENTHO it was mounted successfully right before i rebooted into recovery (did this 3 times to make sure)
did some researching and found a solution for honor 4c http://forum.xda-developers.com/honor-4x/help/huawei-honor-4x-balong-hi6210sft-fixed-t3324335 or two BUT both for lolllipop and i'm marshmallow.
i'm already halfway at the method i mentioned above but i stopped after i realized it was for lollipop. i rooted my mobile and changed my build number to "Che2-L11C636B330". worth to mention that my model number remained already the same "Che2-L11".
the cust folder error is still there whenever i go to the bootloader
now i have no idea what to do, what firmware to download and if i have to downgrade first to lollipop and then upgrade to marshmallow again...
my marshmallow version was the middle east final version before this balong happened: Che2-L11C185B561 and i would like to go back to it again.. thank you in advance ( :
###*UPDATED BELOW*
fixed my problem trying the method here http://forum.xda-developers.com/honor-8/help/honor-8-rooted-twrp-modaco-rom-unable-t3462039/page2
>>>>worth to mention that i flashed my oeminfo for my UPDATE.APK REGION before flashing the extracted files from UPDATE.APP "wasn't mentioned in that method"
now i'm back to my original marshmallow version "middle east". good luck people.
Click to expand...
Click to collapse
Thanks on the update about your success on restoring your phone. Surely some poor soul will get along the same problem and your post will help him out. Sorry for the late reply btw.
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
How to Root my honor 4x Che2-L11?
Hi everyone, I'm noob, so I need a step to step guide if there's such a thing
my android version is 6.0 and EMUI 4.0
I have bootloader code for unlocking the phone, thanks in advance guys, also happy new year :good:
Phone Honor 4x (che1-L04) Stuck in fastboot mode
My phone is stuck in fastboot mode. Couldn't get the bootloader unlock key online as it requires the product id which can be obtained by dialing a number which isn't possible. I have requested directly from the customer care number and the official chat portal as well but its been more than a week and still they are asking for 24 working hours. Is there any alternative method of getting the key or atleast the Product ID?
Model name :Che1-L04
Stuck in Fastboot & Rescue mode with the bootloader locked.
I got unlock key after 12 days. Honor 4x hanged after restart it is in bootloop.
3 button sd card update not working ?
oppili said:
I got unlock key after 12 days. Honor 4x hanged after restart it is in bootloop.
3 button sd card update not working ?
Click to expand...
Click to collapse
No the update.app isnt working I guess because I have already flashed the CM13 recovery image with the bootloader locked. However, I recieved the bootloader key yesterday from the email but when I tried unlocking by the fastboot command it said it is an invalid or wrong key. Is there any other way to take my phone back to stock condition atleast without actually unlocking the Bootloader?
Princeshubh said:
No the update.app isnt working I guess because I have already flashed the CM13 recovery image with the bootloader locked. However, I recieved the bootloader key yesterday from the email but when I tried unlocking by the fastboot command it said it is an invalid or wrong key. Is there any other way to take my phone back to stock condition atleast without actually unlocking the Bootloader?
Click to expand...
Click to collapse
1. Try "fastboot continue" it will directly boot without going to recovery.
2. If fastboot flash works flash recovery of the firmware installed in phone before bootloop.
3. If still not works flash boot, system, recovery (in this order) of firmware installed before bootloop.
Confirm unlock key with customer care if it is still locked.
I wanna know is there any other method to install xposed framework since the normal installation is not working for me.
Using Honor 4x Che1-l04 running on (stock ROM) Android marshmallow 6.0.1, have TWRP custom recovery and is rooted.
SumitGupta2442 said:
I wanna know is there any other method to install xposed framework since the normal installation is not working for me.
Using Honor 4x Che1-l04 running on (stock ROM) Android marshmallow 6.0.1, have TWRP custom recovery and is rooted.
Click to expand...
Click to collapse
no other way, unfortunatly.. one way or the other, you have to flash the zip...
ps: if you are on emui, first boot after flashing xposed will take a really long time.. mine took around 25 minutes to boot.. so dont consider it a boot loop, wait untill 30 minutes and you will be profitted
Mine was in boot screen for around 3 minutes and then rebooted into recovery. Same thing was happening again and again. So at last did the restore process from TWRP.
oppili said:
1. Try "fastboot continue" it will directly boot without going to recovery.
2. If fastboot flash works flash recovery of the firmware installed in phone before bootloop.
3. If still not works flash boot, system, recovery (in this order) of firmware installed before bootloop.
Confirm unlock key with customer care if it is still locked.
Click to expand...
Click to collapse
Its not working. Please help me I am still stuck....any way of installing the stock ROM back via fastboot mode with the phone showing 'Phone Locked'
Restoring TOO MUCH with twrp?
Can restoring too much with TWRP damage my phone?
jwalker9715 said:
Can restoring too much with TWRP damage my phone?
Click to expand...
Click to collapse
not really..
Bootloader : Unlocked
Recovery : Revolution Nougat Recovery for p9 lite
Device : GT3 NMO-L22 (NEM-L22 oeminfo flashed)
So I've soft bricked my phone pretty much, I have tried plenty of methods to try and rollback to MM but have had absolutely no luck. I have been able to flash boot images, recovery images and system image files extracted from nougat update.app files and marshmallow update.app files but the phone will hang on "device is now booting" .
Either the dload method will keep giving errors or the extracted files wont work I have tried flashing some roms but still nothing. sort of dont know what to do but would flashing another devices oem info help to install update.app files via dload method ?
Any help would be greatly appreciated cheers
take image files from b100 update.App
Hi i got exactly same problem as your, i tried everything for like 8 hours and nothing successful, then i tried "Huawei Multiool" and flash recovery for honor 5c emui 5.0 then i rebooted my phone and it works i was ****ing happy because twrm not work for me
Sorry for my english
btw it doesnt depend whats your model there are also custom recoveries for p9 lite
links please Ive found links for both suggestions but not sure if Ive found the right ones thanks
Update : Okay so I need help still guys and didnt want to start another thread but I still have been unable to find an update package that will install using dload method. Please help I've tried everything including extracted img files using huawei update extractor. like i said in the op i dont know which update to download as I have tried alot and none of them seem to be doing the trick. please any help would be much appreciated
Edit : Have also tried the recommended fixes but none have made a difference unless im downloading the wrong files of course every single update file gives me the same error using dload method "incompatibiltiy with current version please download the correct update package"
so after what i thought would be an impossible fix i've finally found my solution, I dont know if this will work for everyone else but its definitely the easiest method I found through trial and error and trying way to many other methods i was hoping would work but here it goes.
Through the twrp 3.0.2 recovery recommended above I flashed hw_EU.zip recommended by user DRUGER in another thread for changing firmware to EU NEM-L51
after that I simply downloaded both the update.zip and update_data_full_hw_eu.zip for NEM-l51C432B120 and extracted only the update.zip file and placed the update.app file in a dload folder on the root of my SD card
I then wiped every partition apart from internal storage, oeminfo and sd card.
After that I tried to flash the update.zip giving me error 7 but I ignored it and then went on to flash the update_data_full_hw_eu.zip after that I wiped the cache and powered off the phone.
After that I used the 3 button method to go through to the update mode and for the first time ever I was able to install the update with no hitches, I am now on B130 build and honestly couldn't be happier I tried so many different firmware recommended everywhere but this was the only method that worked for me, It may not be the original model firmware and it may not work for other people but it worked for me so Im glad.
Also I may have made some unnecessary steps along the way but its better to include everything I did in case someone else decides to give this a try Im just happy to have a working phone again
Hey I need Nem L22 OEM can you please share here?
Fixed your device?
Just the device with proper OEM you can dload with proper update. App of yours oem.
After dload, not booting, all you need is to reboot to stock recovery and giving it a factory reset.
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
I have the same problem but with a different firmware.. now only thing i can do is use dc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
MobileTechArena said:
I have the same problem but with a different firmware. now only thing i can do is usedc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
Click to expand...
Click to collapse
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
barnabaXXX said:
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
Click to expand...
Click to collapse
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Thanks for making it clear. Please tell me if it worked or not. Thanks.
barnabaXXX said:
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
Click to expand...
Click to collapse
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
barnabaXXX said:
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
Click to expand...
Click to collapse
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
barnabaXXX said:
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
Click to expand...
Click to collapse
Unfortunately I can't help you further than what I already posted.
But keep updating in case someone more knowledgeable peeks in.
similar problem....I was fairly good but play store was stuck in pending download....
I did a wipe in TWRP, and ended with a black screen...
I can boot to eRecovery, but it fails.and also to TWRP.
when attached to PC it keeps being seen and unseen as if its stuck in a power on cycle
Any help would be greatly appreciated.
Already Tested
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Hello did you already test ???
Here is the solution for every PRA-LX1: [http : // www . htcmania . com / showthread . php ? t=1326478] (sorry for the spaces, but I don't have enough posts written to post external links )
Unfortunately, it's from a spanish forum. I didn't found any problem to follow this tutorial, but maybe for someone it could be a little difficult.
Anyway, it works!
MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Where did you find the C432 firmware? I can't succees to find it
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Iocere said:
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Click to expand...
Click to collapse
Yeah, that's the way! It worked for me too!
juanmemo said:
Yeah, that's the way! It worked for me too!
Click to expand...
Click to collapse
Also i noticed everytime a OTA fails you get the full version offered on next boot. So you should get a full B164 aswell after it failed
JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
how can you boot into recovery ? i can only boot into twrp or fastboot & rescue or if i plug the huawei to the pc erecovery ???
---------- Post added at 12:16 AM ---------- Previous post was at 12:13 AM ----------
i have an huawei pra-lx1 c530 it used to boot into pra-lx1c530b111 rooted and twrp but now it doens't boot anymore, i'd like to flash to c530b160 but i can't find the firmware images
tiagoggama said:
Hello did you already test ???
Click to expand...
Click to collapse
Thanks men
I CONFIRM IT WORK PERFECTLY
For the second part go to this link for more detail :
https://boycracked.com/2016/03/14/h...-unbrick-firmware-any-huawei-android-devices/