Hello everyone!
We are pushing out the incremental roll-out of OxygenOS 5.0.1 for OnePlus 3 and 3T. Here are some of the highlights of this build:
System
Added support for aptX HD
Added Wi-Fi hotspot device manager
Added "adaptive mode" screen calibration
Updated Android security patch to December
General bug fixes and stability improvements
For those who were on previous versions for OnePlus 3 and 3T, we appreciate your active feedback and attempts to reach out to us. With your help, we have been able to better optimize and improve several key areas. Thank you for your patience and as always, we look forward to hearing your continued feedback in the bug reporting forum here: https://forums.oneplus.net/feedback/.
As always, this OTA will be incremental. The OTA will reach a small percentage of users today, and we'll begin a broader rollout in a few days.
Your feedback is appreciated. We may not always be able to respond to every comment in the forums, but please be assured that we take your comments and feedback seriously. Hope you enjoy and let us know how you feel about the update in the comments below.
Never Settle.
Jimmy Z.
Staff Member OxygenOS PM
Thanks for info :good:
As always, this OTA will be incremental. The OTA will reach a small percentage of users today, and we'll begin a broader rollout in a few days.
If you are on 5.0 try a vpn (opera vpn: https://play.google.com/store/apps/details?id=com.opera.vpn&hl=en set germany, canada..., and check system update from settings) to grab the OTA or try Oxygen Updater: https://play.google.com/store/apps/details?id=com.arjanvlek.oxygenupdater
Or Flash the OOS 5.0: http://oxygenos.oneplus.net.s3.amaz...6_OTA_060_all_1711160505_4058f102bbfb40b9.zip and update to 5.0.1
Edit.
Official download link is out!
http://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_5.0.1/
Someone have the full rom zip?
Edo 91 said:
Someone have the full rom zip?
Click to expand...
Click to collapse
Available just for OP3T
https://drive.google.com/uc?id=1lKmMWXLJkTdWuvDKuxmNbyQQrcR5eAjd&export=download
Maybe should wait for OP3 link as the roll out for 3 was late.
Quick look video here
This is great news!
So far batter drain has not been an issue on mobile standby which is nice. Though I am airing on the side of pessimistic as it wasn't on the first cycle for oreo either then became a problem after.
Colour change for the quick tiles is back to white which is great as well but sadly they have left them gimped and as toggle switches, no quick menu for wifi for example.
As long as they fixed the mobile standby drain persistently I will be happy!
Hi at all,
This is link for Download Full ROM OP3:
https://mega.nz/#!AhR3kAJK!NeECl3OYrudTNNSM_Oc1LSsL7qXYntQY_SBMRzI_Ocs
Enjoy!!!
Show a ss of adaptive display option pls
Here ya go...
No problem if I dirty flash the full 5.0.1 firmware from last beta ?
Bryandu13 said:
No problem if I dirty flash the full 5.0.1 firmware from last beta ?
Click to expand...
Click to collapse
Hmm, don't know...
Usualy the rule is dirty flash OpenBeta from OOS or clean flash OOS from OpenBeta.
Backup and try
Anyone dirty flashed with latest magisk? Some users reported bootloop with Magisk 15.1 [emoji51]
Sent from my ONEPLUS A3000 using Tapatalk
massalim said:
Anyone dirty flashed with latest magisk? Some users reported bootloop with Magisk 15.1 [emoji51]
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
Dont't flash rom+magisk 15.1 !
Flash rom+magisk 15.0 or below (14.6...), boot to system, then update magisk from magisk manager (tick Preserve Force Encryption).
Bryandu13 said:
No problem if I dirty flash the full 5.0.1 firmware from last beta ?
Click to expand...
Click to collapse
Why not try to read the thread about OB? I think you will find the answer of your question there...
Sent from my ONEPLUS A3003 using XDA Labs
Can someone post a link to OnePlus 3 full zip ROM from official site, please?
Zielony360 said:
Can someone post a link to OnePlus 3 full zip ROM from official site, please?
Click to expand...
Click to collapse
No official yet. Check 1st page.
Great update
Guys, do you have led working while in silent mode?
Updated with latest blu_spark TWRP from 4.5.0. OxygenOS 5.0.1 + Magisk 15.0 + FrancoKernel r33. Works fine so far.
I downloaded full zip with Oxygen Updater app.
Related
"Hi all,
OxygenOS 4.1.5 was withdrawn, we are pushing out the incremental roll-out of OxygenOS 4.1.6 (7.1.1) OTA for OnePlus 3 and 3T instead.
Here are some highlights
New additions:
• Added system push notifications for important information from OnePlus
Updates:
• Updated network settings for select carriers
• Updated OnePlus Community app to v1.8
• Updated Android Security Patch level to 1st May 2017
• Modified WiFi no internet indication icon
Bug fixes:
• Fixed storage issue present on 3rd party filemanagers
• Fixed VoLTE issue on certain Jio SIM cards
• Fixed connection issue on Android Auto
Optimizations:
• Battery
• Proximity sensor
• Camera low light focus
• Expanded screenshot
Other changes:
• Enhanced system stability
For those who were on previous versions for OnePlus 3 and 3T, we appreciate your active feedback and attempts to reach out to us. With your help, we have been able to better optimize and improve several key areas. Thank you for your patience and as always, we look forward to hearing your continued feedback in the bug reporting forum here: https://forums.oneplus.net/feedback/.
As always, this OTA will be incremental. The OTA will reach a small percentage of users today, and we'll begin a broader rollout in a few days.
Your feedback is appreciated. We may not always be able to respond to every comment in the forums, but please be assured that we take your comments and feedback seriously. Hope you enjoy!
Please make sure to fill out our user survey here: https://goo.gl/forms/Pvr6KisTvbFoqZkl1
Never Settle."
Any change for touch latency?
How about Active Display 2? Or is that coming in 4.2.0 after OP5 launch?
hiredantispammer said:
Any change for touch latency?
How about Active Display 2? Or is that coming in 4.2.0 after OP5 launch?
Click to expand...
Click to collapse
None of those have been implemented yet in the stable branch however touch latency does feel a bit better from the previous updates.
Sent from my OnePlus3T using XDA Labs
Does it have the new launcher like openbeta?
mirrors?
Full zip: https://drive.google.com/open?id=0BxGPM6xL3ncmMUdFX2VjbTFYQXc
Full zip MEGA Link
md5sum: e8e709972614ccf6fedb3a75971a1b7c
Hi, I'm on previous official, blueTwrp and rooted with SuperSU. I understand OTA is lost so if I would like to update to latest:
1. Flash incremental and twrp
2. Reboot to recovery and flash magisk
Correct?
Thx
Sent from my ONEPLUS A3003 using Tapatalk
anyone try dirty flashing from beta 17 to OOS 4.1.5? Issues?
andyman_187 said:
anyone try dirty flashing from beta 17 to OOS 4.1.5? Issues?
Click to expand...
Click to collapse
Dirty flashing from beta to stable is a no go...
Στάλθηκε από το ONEPLUS A3003 μου χρησιμοποιώντας Tapatalk
andyman_187 said:
anyone try dirty flashing from beta 17 to OOS 4.1.5? Issues?
Click to expand...
Click to collapse
I did so with previous beta and stable builds. It can work without issues, but it can also cause trouble.
As always -> full nandroid backup and try it yourself!
Nice to see development going on, but still a few important features missing from Open Beta: touch latency improvement, automatic night mode and game mode.
I appreciate a lot all of these, so I guess I'll stay with Open Beta as it works very well, fast and stable.
I'm curious about the lowlight focus improvements which are not in the beta yet.
official download link: http://otafsc.h2os.com/patch/amazon...16_OTA_053_all_1706041811_938156857a4e65b.zip
Just got the OTA by using the Germany VPN. :victory:
All I'm looking for is the great battery life of 3.2.8. Everything since then has been rubbish in comparison. :crying:
Credit to One Plus for the updates. Lets hope they keep coming once the OP5 is released.
rzat01 said:
Hi, I'm on previous official, blueTwrp and rooted with SuperSU. I understand OTA is lost so if I would like to update to latest:
1. Flash incremental and twrp
2. Reboot to recovery and flash magisk
Correct?
Thx
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
My usual procedure is to flash the full zip, magisk and then reboot.
Wold said:
My usual procedure is to flash the full zip, magisk and then reboot.
Click to expand...
Click to collapse
Thx, updated, twrp, flashed full and magisk. All good.
Sent from my ONEPLUS A3003 using Tapatalk
Finally Android Auto is supposedly fixed??
Just last week, after having the phone for a year, I FINALLY got fed up and unlocked and rooted the phone to get off OOS so I could have functioning Android Auto.
Well since the phone is unlocked now I guess I'll try out Freedom once they update to 4.1.5.
Sent from my ONEPLUS A3000 using Tapatalk
Can somebody tell me if the latest OnePlus Slate font option is present in the new 4.1.5 or not? Just curious, but can't find it in any changelog so far
what does this mean? seems concerning.....
New additions:
• Added system push notifications for important information from OnePlus
"Hey everyone,
Here are the latest open beta builds for OnePlus 3 and 3T.
Release notes
Launcher
Improved search tags in App drawer
Added "New installs" category tag in App drawer
Improved app list for hidden space and toolbox
Camera
Optimized switching between front and rear camera
Multimedia
Added capability to scrub/seek through AAC audio file timelines
Please keep in mind that this is beta software. These builds are sometimes not as stable as our official OTAs generally are. By installing this update, you accept the potential risks.
And please remember to tell us about any bugs you may find using the bug report forums, found here. https://forums.oneplus.com/feedback/
Please note:
If you have already flashed an Open Beta (you are currently running the latest Open Beta) you will receive this new build as an OTA.
If you are not running open beta software and would like to, please refer to the flashing instructions and the full ROM found on the downloads page here: http://downloads.oneplus.com/ (requires full data wipe before updating from stable to open beta)
Once you migrate to the Beta path, you will continue to receive Open Beta OTAs. You will no longer receive the regular Official Stable OTAs.
Moving back to the Official OTA path from the Beta path will require a full install and clean flash (FULL WIPE of all data and cache)
Please note that this is the last open beta for OnePlus 3 and OnePlus 3T, we will provide a stable version of OnePlus 3/3T for beta testers to migrate back to stable version of OxygenOS later this month to ensure beta testers will receive regular Android security patch update and so on.
Make sure to let us know how you feel about the beta builds here in the thread too, we are watching."
Gdrive Link for beta 34 credit to @theduke7 :
https://drive.google.com/file/d/1o8jJPsqAKhjRWJWmv9cymksghAJ7YwrA/view
https://dl.xda-developers.com/4/2/0/0/2/6/2/Screenshot_20170703-141050.png?key=jM3BUdtEIPxZKh7O00c-CQ&ts=1499071824
Ota file anyone?
No kernel source released yet?? or no kernel changes on this beta 19???
G drive link full zip beta 20
https://drive.google.com/file/d/0B9UeupRxu1D_cDRGa1FjczFXQ2M/view?usp=drivesdk
As usual you people are so quick. Thanks a lot.
And Oxygen so slow...
On OnePlus site 04.07.2017. On the zip file 27.06.2017, like ob from Hydrogen OS..
Works Fine!
I did a full wipe, clean flash. Reflash Twrp 3.1.1.38 by eng stk. On a second reboot to system, phone goes back to stock recovery.
I reflash recovery from laptop with ADB in Fastboot. All good.
mysky911 said:
No kernel source released yet?? or no kernel changes on this beta 19???
Click to expand...
Click to collapse
Haven't heard Oneplus releasing kernel source for beta builds. I've only ever heard they release for the stable branch
null0seven said:
And Oxygen so slow...
On OnePlus site 04.07.2017. On the zip file 27.06.2017, like ob from Hydrogen OS..
Click to expand...
Click to collapse
So they're supposed to release immediately without testing the builds, stop being a noob
Does bootloader needs to be unlocked to sideload update from stock recovery ?
Do I have to turn on USB debugging ?
I'm on stock 4.1.6, with locked bootloader, want to go to beta builds.
Don't shoot me for this noob question, I just own a op3 for 2 days....
Renosh said:
Haven't heard Oneplus releasing kernel source for beta builds. I've only ever heard they release for the stable branch
Click to expand...
Click to collapse
OP did released kernel source for OB18 on middle June...
https://github.com/OnePlusOSS/android_kernel_oneplus_msm8996/commits/oneplus/QC8996_N_7.1_Beta
abhi0502 said:
G drive link full zip
https://drive.google.com/file/d/0B9UeupRxu1D_Ukl5Z0FCdlpfQ0U/view?usp=drivesdk
Click to expand...
Click to collapse
Lots of thanks man
abhi0502 said:
G drive link full zip
https://drive.google.com/file/d/0B9UeupRxu1D_Ukl5Z0FCdlpfQ0U/view?usp=drivesdk
Click to expand...
Click to collapse
Thanks man! The official link keeps failing on me and I am currently on FreedomOS so OTA isn't an option. Hopefully this will download.
Anyone having trouble re-rooting op3 after this update? Latest supersu fails to install on twrp after I flashed this update.
genaroneto said:
Anyone having trouble re-rooting op3 after this update? Latest supersu fails to install on twrp after I flashed this update.
Click to expand...
Click to collapse
Hi,
Try magisk, it's fine
Or maybe the latest supersu 2.82 SR1?
Sent from my OnePlus3 using XDA Labs
laupuy said:
Hi,
Try magisk, it's fine
Or maybe the latest supersu 2.82 SR1?
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Thank you, it worked perfectly.
i reflashed TWRP blu spart but after one boot again reverted back to stock. any solution. OB19
Justfarooq said:
i reflashed TWRP blu spart but after one boot again reverted back to stock. any solution. OB19
Click to expand...
Click to collapse
I am not sure how your flashing steps are but what I do when flashing oxygen os is usually flashing twrp img right after flashing oxygen os, then reboot to recovery, finally reboot to system. This way i never lose TWRP.
On a second reboot to system you will loose twrp. Stock recovery takes over.
Yes, after flashing the rom i reflash twrp. This happen on H2o ob16 & Oos ob19
I reflash twrp from laptop. Reboot to recovery, NOT to system !
From oneplus ::
Hello everyone!
We are pushing out the incremental roll-out of OxygenOS 5.0, our first official Android O OTA update for the OnePlus 3 and 3T. Here are some of the highlights of this build:
System
Update to Android O (8.0)
Added Parallel Apps
Added Picture in Picture
Added Auto-fill
Added Smart text selection
New Quick Settings design
Updated security patch to September
Launcher
Added notification dots
New app folder design
Now able to upload photos directly to Shot on OnePlus
For those who were on previous versions for OnePlus 3 and 3T, we appreciate your active feedback and attempts to reach out to us. With your help, we have been able to better optimize and improve several key areas. Thank you for your patience and as always, we look forward to hearing your continued feedback in the bug reporting forum here: https://forums.oneplus.net/feedback/.
As always, this OTA will be incremental. The OTA will reach a small percentage of users today, and we'll begin a broader rollout in a few days.
Your feedback is appreciated. We may not always be able to respond to every comment in the forums, but please be assured that we take your comments and feedback seriously. Hope you enjoy and let us know how you feel about the update in the comment below.
Thank you.
Click to expand...
Click to collapse
Download links
Oneplus 3 download links::
Oxygen OS 5.0 full ROM zip :: https://drive.google.com/open?id=1w2zhRt-DfJuBsdMdEGyg6t-cUYS-dsQg
Oxygen OS 5.0 OTA(incremental from 4.5.1) zip :: https://drive.google.com/open?id=1w2zhRt-DfJuBsdMdEGyg6t-cUYS-dsQg
Oneplus 3T download links::
Oxygen OS 5.0 full ROM zip :: https://drive.google.com/file/d/1AfnQPT3-zGj85fVDH3Go3q5Ph9PzfDD4/view
Oxygen OS 5.0 OTA(incremental from 4.5.1) zip :: https://drive.google.com/file/d/1AfnQPT3-zGj85fVDH3Go3q5Ph9PzfDD4/view
A sleepless Sunday night ? Updated!
Sent from ma OnePlus3
Has anyone tried to dirty flash OOS 5 over OB27 ?
Edit : dirty flash works and also magisk 14.3 :good:
Battery seems a lot better to nougat, no more random wakelocks. Not sure I like the quick tiles but otherwise a nice update!
Hey, can anyone please help me with the installation? I cant install it using the latest official TWRP as well as latest BluSpark TWRP.
akhilarora666 said:
Hey, can anyone please help me with the installation? I cant install it using the latest official TWRP as well as latest BluSpark TWRP.
Click to expand...
Click to collapse
On the latest bluspark TWRP all is good. Come on.
I went from OB 27 to Stable 4.5.1 just to download the full zip.
After that updated to 5.0.
It's pretty straight forward.
On other news, I have asked about this on the 3T thread as well.
I had already found this quirk on OB Oreo, was truly hopping that the stable would have this as ok as it should.
Can anyone confirm that Google drive backup has this information?
It's under settings/backup & reset/Google account
and it for sure shouldn't look like this.
Chaplan said:
On the latest bluspark TWRP all is good. Come on.
I went from OB 27 to Stable 4.5.1 just to download the full zip.
After that updated to 5.0.
It's pretty straight forward.
On other news, I have asked about this on the 3T thread as well.
I had already found this quirk on OB Oreo, was truly hopping that the stable would have this as ok as it should.
Can anyone confirm that Google drive backup has this information?
It's under settings/backup & reset/Google account
and it for sure shouldn't look like this.
Click to expand...
Click to collapse
I tried with the latest TWRP, but it gets stuck half the way. I waited for 20 minutes, it was stuck.
Bluetooth audio codecs can't be changed from Developer options. Oxygenos clean install Oreo
Wonder why
Was on Open Beta 27 with Blu_spark's twrp and r206 kernel.
- Downloaded full OOS 5.0 rom zip
- Flashed stock recovery
- Did local upgrade via the System Update
- reflashed blu_spark TWRP
- SuperSU 2.82 SR5
- reflashed blu_spark's r206 kernel
Profit
pompidoi said:
Was on Open Beta 27 with Blu_spark's twrp and r206 kernel.
- Downloaded full OOS 5.0 rom zip
- Flashed stock recovery
- Did local upgrade via the System Update
- reflashed blu_spark TWRP
- SuperSU 2.82 SR5
- reflashed blu_spark's r206 kernel
Profit
Click to expand...
Click to collapse
Are you encrypted?
vivian&ondine said:
Are you encrypted?
Click to expand...
Click to collapse
With blue spark if you flash DM verity and Force encryption disabler without reboot u keep encryption
Sent from my ONEPLUS A3003 using XDA-Developers Legacy app
I'm on OOS 4.5.1 with TWRP and root. When an update comes out, I usually just wipe cache/dalvik, flash the full updated ROM and flash SuperSU, all using TWRP. Since this is a major update going from Nougat to Oreo, is it still OK to use this method?
What about Android system notification? I can't get rid of it.
Edit: found a "solution". I've Installed an app from G play called Hide running in the backgroud...Apparently, this is an Oreo issue present in any device.
PS: I'm not the developer of that app
claudiuch said:
What about Android system notification? I can't get rid of it.
Click to expand...
Click to collapse
Either wait for 8.1 or use an app to hide it.
http://www.androidpolice.com/2017/0...ndroid-oreos-running-background-notification/
Tap-a-talked from my OP3
claudiuch said:
What about Android system notification? I can't get rid of it.
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.iboalali.sysnotifsnooze
Can you flash it using akhil narang twrp version?
Download quota for op3 full OTA exceeded
Someone Please put up fresh links for the Oreo 8.0 build, the OP's drive account won't let anyone else download
Anyone knows if this works for updating from old 4.x to 5.x:
1. Flash full zip from within TWRP (Oreo compatible one)
2. Reboot to recovery after flashing OS
3. Flash Magisk (14.3 beta I want to flash)
4. Whipe dalvic+cache
5. Reboot to system
That's how I updated my previous Oos updates (without the things between brackets)... Never had issues before and this way also didn't trigger the dm-verity warning. But I see so many people having issues during open beta I rather be sure before I try...
OxygenOS Open Beta 6 for the OnePlus 7 Pro.
OxygenOS Open Beta 6 for the OnePlus 7 Pro bump up the security patch level to November 2019. The update also adds a “Disable” option for Zen Mode in Settings, so you won’t have to resort to ADB just to get rid of the app.
Changelog
The complete changelog for the Open Beta 6 update is as below:
System:
Fixed the visibility of the fingerprint icon
Fixed the issue with the interruption of Music in the ambient display
Improved the animation effect of fingerprint icon
Updated Android security patch to 2019.11
Improved system stability and General bug fixes
Zen Mode:
Added the “Disable” option in the app info section
OnePlus Care (India Only):
Bind your phone to get rewards, premium experience, and exclusive offers
OnePlus 7 Pro
Incremental OTA zip for OxygenOS Open Beta 5 –> Open Beta 6 (Download)
OxygenOS Open Beta 6 Full OTA zip
Original Source site:
https://www.xda-developers.com/onep...6-november-security-patch-zen-mode-disabling/
o0ocloudako0o said:
Update log for OnePlus 7 (Pro) Open Beta 4 (Oxygen OS 10) OTA Update:
System
Fixed the screen flashing issue with setup while adding the fingerprint
Fixed the issue of the accidental muting of a vehicle navigation system with a Bluetooth connection
Fixed the disabling of mobile data after an upgrade
Optimized visual effects of the permission’s pop-up window
Optimized the black and white screen issues with some apps
Improved system stability and fixed other known issues
Phone
Added the “Raise to lower the ringtone” feature in Sounds & Vibration for incoming calls
Enabled efficient addition of unknown numbers to contacts
Optimized the description for the features
Expanded the dial pad area to avoid mis-touches
Messages
Optimized the message sorting feature by verification code
Calculator
Optimized UI and interactive experience
OnePlus Switch
Supported transfer of iPhone data through iCloud
Weather
Added The Weather Channel as a data source for accurate weather data
Download:
Download Android 10 Open Beta 4 for OnePlus 7 Pro (direct link Global)
Link on orignal site:
https://www.****************/2019/1...beta-4-for-oneplus-7-and-7-pro-ota-downloads/
Click to expand...
Click to collapse
Dirty flashed over stable 10.0.1 and running fine! :good:
I confirm !
Thanks...
Good stuff! Cheers
Is it normal for Oneplus to keep Beta builds alive, even after the OS Android 10 has been released?
Android 10 has been released and a maintenance release was posted seems weird to see Betas.
AstroDigital said:
Is it normal for Oneplus to keep Beta builds alive, even after the OS Android 10 has been released?
Android 10 has been released and a maintenance release was posted seems weird to see Betas.
Click to expand...
Click to collapse
OnePlus run a permanent Open Beta channel for public testing till the device is EOL.
AstroDigital said:
Is it normal for Oneplus to keep Beta builds alive, even after the OS Android 10 has been released?
Android 10 has been released and a maintenance release was posted seems weird to see Betas.
Click to expand...
Click to collapse
They use them to test next versions and new "toys"
avid_droid said:
How is everything running so far? Bluetooth? Is it actually fixed in this one?
Click to expand...
Click to collapse
I have stayed with the betas since OB2 and have also used stable. Have never had any real issues with either.
Current setup is Base OB4 with a load of the latest Omni 10 over both slots and this is and update setup without a data format. Was previously using OB3 with Omni as well prior to the update. Galaxy watch and all my apps work flawlessly on this OB4 as they did with OB3. Planing on adding @pappaschlumpf kernel as I also have latest magisk running well on this also. Not sure yet as everything, and I mean everything works perfect... OOS 10.0.1 cam as well as latest Gcam together!
Cheers!
djsubterrain said:
They use them to test next versions and new "toys"
Click to expand...
Click to collapse
Love the cutting edge, and the nominal risk!
H4X0R46 said:
Dirty flashed over stable 10.0.1 and running fine! :good:
Click to expand...
Click to collapse
Sweet! listed my setup below - its a nice update:good:
kenbrownstone said:
Thanks...
Click to expand...
Click to collapse
Very welcome brother! I figured somebody was going to reveal this here - but just went ahead a did it as I felt the update is a G1
avid_droid said:
Wouldn't that be considered as omnirom instead of base ob4? Once you flash the ROM over it's no longer oos. Not sure as to what you mean!?? All is being used from oos is the vendor partition which omnirom overrides the system to AOSP or LineageOS base. Therefore it no longer being an OOS base. So I'm confused as to what you are saying??
I'm currently on OB4 from crdroid, had to switch because of data connectivity issues. So far so good.
OOS can be used as base to get the right system and vendor in order to be compatible with the Custom ROM you are flashing. All features from OOS does not transfer to Omni just a fyi
Click to expand...
Click to collapse
Yes, yes, and yes, but I spose clarification helps. You are as you have been correct in most all of your post both here and the Tele CRDroid channel - meaning I respect and trust your steps/help/info you provide!
My "current setup" is as such with omni over OB4 - very aware once flash ASOP Rom from OOS we change worlds. My use of the word "base" is to the foundation or stable starting point prior to getting to my "current setup". I like very much OOS features and have found OB2, OB3, stable 10.0.1, and OB4 for a few minutes today to be stable, but I much prefer my ASOP flavor and the added access it gives for my type of mods. Do forgive me for not clearing a line between the two and what we are meaning to imply.
The main reason I have not tried CRDroid is because of the connectivity issues and that I very much want to give a Kernel a try. Hope this gets us crystal!?!
New to phone ,I just flash 21.0.21 OTA.
And this build 13.W is the latest ? Excuse the noob question
Edit: ok i understand now,stable release and beta testing.my question now is can I just flash the beta version now?
H4X0R46 said:
Dirty flashed over stable 10.0.1 and running fine! :good:
Click to expand...
Click to collapse
Did you use TWRP to dirty flash?
jac0b said:
Did you use TWRP to dirty flash?
Click to expand...
Click to collapse
I just did a dirty flash then flashed TWRP, rebooted into TWRP, flashed Magisk, wiped cache and running fine. Still rooted and passing Safety check.
I'm so jealous of everyone. I have TMobile and I'm in the USA. I wish I had the latest upgrade.
Is battery life on Beta builds better than stable? I'm really tempted to use the beta 'cause the battery in my stable is pretty disappointing, speacially in standby.
nfamisnme said:
I'm so jealous of everyone. I have TMobile and I'm in the USA. I wish I had the latest upgrade.
Click to expand...
Click to collapse
I believe you can switch to the global version with the msmtool
So I updated to the beta 4
First I formated the phone in TWRP
Then installed the beta4 and TWRP
Then rebooted into TWRP
Then installed the beta4 and TWRP
Then rebooted into TWRP
Then rebooted into system
My problem is not music going through the car speakers
Again I can make phone calls and receive calls through car speaker
I have had this issue on all 10 updates
Then only way I get the Bluetooth to work right is either on Android 9 or the Pixel Experience ROM
The only difference I see in developer option between the oos 10 and Pixel Experience ROM is
Disable Bluetooth A2DP hardware offload is grayed out turned off on the OOS 10
But on the Pixel Experience ROM Disable Bluetooth A2DP hardware offload is grayed turned on
I'm running the beta4 right now anyway to fix this I want to run 10 but need my car audio to work
HELP PLEASE ?
Sorry I thought I put the right screenshot
Changelog
System
Newly added user assistance feature to help user master usage skills quickly (Route: Settings>OnePlus Tips&Support)
Optimized power consumption of the system and improve user experience (OP7 Pro Only)
Fixed the flashback issue with some third-party apps
Fixed known issues and improved system stability
Updated Android Security Patch to 2020.09
EU
10.0.9 EU now on Oxygen Updater
Mirror : https://www.androidfilehost.com/?w=files&flid=318928
My Android 10 Collection : https://www.androidfilehost.com/?w=files&flid=296897
GLOBAL
10.3.6 GLOBAL now on Oxygen Updater (Took long enough)
Official : https://otafsg1.h2os.com/patch/amaz...xygen_21.P.30_OTA_030_all_2010111737_2b80.zip
Mirror : https://www.androidfilehost.com/?fid=10763459528675577068
My Android 10 Collection : https://www.androidfilehost.com/?w=files&flid=296897
I did the updates and the magisk crashes the safety net error. cts profile. I always did flash rom, flash recovery reboot recovery flash magisk and reboot system I think I made a mistake ...?
---------- Post added at 01:40 AM ---------- Previous post was at 12:51 AM ----------
after an hour it returned to normal. post to be removed
Thanks for the heads, up.
The title says 10.3.6 as well. apologies i cant seem to find it with you link? Just the EU one.
djsubterrain said:
Changelog
System
Newly added user assistance feature to help user master usage skills quickly (Route: Settings>OnePlus Tips&Support)
Optimized power consumption of the system and improve user experience (OP7 Pro Only)
Fixed the flashback issue with some third-party apps
Fixed known issues and improved system stability
Updated Android Security Patch to 2020.09
10.0.9 EU now on Oxygen Updater
Mirror : https://www.androidfilehost.com/?w=files&flid=318928
My Android 10 Collection : https://www.androidfilehost.com/?w=files&flid=296897
Click to expand...
Click to collapse
Have seen update for 5g version?
Thanks for heads up, all working fine
OOS 10.3.5 was released Oct 5 with the September security update, so I don't think there is a 10.3.6 coming soon.
tperki said:
OOS 10.3.5 was released Oct 5 with the September security update, so I don't think there is a 10.3.6 coming soon.
Click to expand...
Click to collapse
You're right, I made it up.
https://forums.oneplus.com/threads/...-for-the-oneplus-7-pro-and-oneplus-7.1327938/
Fake news!!! LOL. I apologize and stand corrected.
Final updates before Android 11, not sure why they bothered
This update is just bug fixes for previous update .I don't see anything new
update worked well. root and twrp ok. thanks for the information
what the different between EU and Global ? i have oneplus 7 pro 1913 and i don't remember what it was shiped os from the factory
Working...
Magisk working...
TWRP too...
Thank you for information and testing!
Captinplanet said:
Have seen update for 5g version?
Click to expand...
Click to collapse
I am wondering about same think .. ? Any updates yet ??
avalanch said:
I am wondering about same think .. ? Any updates yet ??
Click to expand...
Click to collapse
Nothing yet..
Captinplanet said:
Nothing yet..
Click to expand...
Click to collapse
Sorry to be pain, I just got Sprint 7 pro 5g And converted into EU version a day ago. So I m really new to this. I was just trying find some kind of time line for updates. Like for instance, OS 10.0.9 (EU) came out few days ago, how long does it usually take 1+ to roll out the 5g version for it. ? Thanks again for ur reply.
avalanch said:
Sorry to be pain, I just got Sprint 7 pro 5g And converted into EU version a day ago. So I m really new to this. I was just trying find some kind of time line for updates. Like for instance, OS 10.0.9 (EU) came out few days ago, how long does it usually take 1+ to roll out the 5g version for it. ? Thanks again for ur reply.
Click to expand...
Click to collapse
No pain no game ..hard to say 5g gm1920 is getting almost same updates as none 5g hopefully soon there is no any schedule. Personally I am finding 10.0.8 as very stable and good battery life no issues at all
avalanch said:
Sorry to be pain, I just got Sprint 7 pro 5g And converted into EU version a day ago. So I m really new to this. I was just trying find some kind of time line for updates. Like for instance, OS 10.0.9 (EU) came out few days ago, how long does it usually take 1+ to roll out the 5g version for it. ? Thanks again for ur reply.
Click to expand...
Click to collapse
Install Oxygen Updater, that's usually where builds appear first.
Battery is better than 10.0.8 ? I had just 5h sot with this build :/
Captinplanet said:
No pain no game ..hard to say 5g gm1920 is getting almost same updates as none 5g hopefully soon there is no any schedule. Personally I am finding 10.0.8 as very stable and good battery life no issues at all
Click to expand...
Click to collapse
Yes no complains here, 10.0.8 is working really stable for me as well. It took 2 charges to calibrate the battery.
djsubterrain said:
Install Oxygen Updater, that's usually where builds appear first.
Click to expand...
Click to collapse
Yep done thanks..