Related
Hello people
I'm new here, in terms of asking questions and seeking help
I have the LG Optimus P970
A few days ago I made the update to ICS, and by proceeding with this page, hackmyandroid.com/optimus-black-p970-official-ics-update/3299
After that, not impossible to connect the phone to a PC, even the software update mode, it can not recognize, anyway to connect it just throws a slow charging.
Is there someone who knows what it is.
I'd love to go back to the old software, but there is no way to detect it pc
Sorry for my bad english
Thanks in advance
I forgot to say, before the update, and my computer still recognize the phone, connecting it over sony usb cable, now it is no longer recognized by the Sony USB cable, and I do not have original LG USB cable.
Perhaps this is the reason why a computer will not recognize the phone
edzunic said:
I forgot to say, before the update, and my computer still recognize the phone, connecting it over sony usb cable, now it is no longer recognized by the Sony USB cable, and I do not have original LG USB cable.
Perhaps this is the reason why a computer will not recognize the phone
Click to expand...
Click to collapse
Your problem can be the non original cable or........reinstall the drivers and try again
Enviado desde mi LG-P970 usando Tapatalk 2
ferhpsquad said:
Your problem can be the non original cable or........reinstall the drivers and try again
Enviado desde mi LG-P970 usando Tapatalk 2
Click to expand...
Click to collapse
I have the original cable, but still the same problem.
I have all drivers installed, I can transfer files between the phone and the pc, I can use the LG suite,
But I can't see my phone on the ADB console, I can't use smartflashtool cause the phone isn't recoginized.
yesterday I tried with lg cable, and wall charger, in both cases, said slow charging the battery, I tried on three different computers, I tried to reinstall the drivers, like the software blocked communication with the phone, just charge the battery.
If there was a way to put the software through SD card, it might solve the problem.
even the software update mode, the computer does not see the phone
Bro! For the softwaretool like smartflash, You need to boot into download mode i.e., You need to switch off the phone, plug in the USB cable connected to the PC and instantly press the volume up button. Then the tool will recognise Your phone. Try it and check once!
I tried it, nothing happens,
I go to download mode, but computer does not recognize it again
behaves as if the port is destroyed
edzunic said:
I tried it, nothing happens,
I go to download mode, but computer does not recognize it again
behaves as if the port is destroyed
Click to expand...
Click to collapse
Try to boot your PC with disabled driver signatures, or use a 32bit windows system.
try entering download-mode the following way:
disconnect your phone from pc
remove battery
press and hold Vol-up
connect the usb-cable (still without battery)
Now the phone should be detected as a serial-cable device an you can use the smart flash tool.
would have to be sound,
no sound when I connect the phone to the PC
Solved my problem.
Seems like windows automatically installs driver to the phone, but it partially works.
Unistall all drivers for the phone, or try on a new computer.
Plug the phone and cancel the driver search by windows
Install drivers for LG (unplug the phone before)
Turn it off
Plug the cable and enter download mode
And there is the phone recognized on smartflashtool.
I'm flashing a new one right now, thank you.
You do not understand the problem
there's no sign, no sound when I connect the phone to a computer, any computer, drivers were or were not.
As if something in the phone blocked communication between the PC and phone
edzunic said:
You do not understand the problem
there's no sign, no sound when I connect the phone to a computer, any computer, drivers were or were not.
As if something in the phone blocked communication between the PC and phone
Click to expand...
Click to collapse
I got same problem.
bollix said:
I got same problem.
Click to expand...
Click to collapse
add me!
Connection Problem with Mackay 2.999
Hey Guys,
first of all, sorry for my not so good English
I'am at Mackay 2.999 with last Kernel of his build and can't connect the Phone to the Computer.
It only install the LGE Mobile Composite USB Device, the LGE Mobile USB Serial Port and the LGE Mobile USB Modem on connecting to the Workstation.
I had test it on many Computers but the Problem is all the same: I can't get on my Memory or ADB.
I also had testet all modes under the setting point (MTP/PTP/mass storage device) and with debbuging on and off.
On my Workstation is the Last Version of ADB (1.0.31) installed.
Did anyone know the problem?
Did no one know a result to this problem
Hmmm my PC also can't read my storage what I did is go to cwm and plugged in usb cable and pressed mount storage it seems to solve my problem. I also did a cache and dalvik cache wipe.
Hey, I have found the result to this problem. You must flash another Baseband. Use from Nooby the V30 Baseband and it is solved.
Gruß Ernst
via Tapatalk 2
but how to flash, when can´t connect to pc
lg optimus
hi frendz ,
please help me out
i'm using lg optimus p970..last night my phone memory get full and mobile get turn off ..now it wont turn on even battery is fully charged...only LG logo shows nithing else...
Hy guys , i have the same problem . I updated to 4.4.2 Nameless ROM and i can't connect my phone to pc . The only action that it's done : charging the phone and that's all . I tried connecting to another pc but with no result . An error appeared :" LGE USB Device - No driver found " .Before 4.4.2 i had 4.1.2 from CyanogenMod and with that ROM i had no problem connecting the phone to the pc . Any help ?
Hey Guys,
yersterday i installed thrue TWRP the LineageOS + LOS Root + Gapps. Everything was fine... till today.
I would like to enter the bluetooth settings. After then, the display recognises no touch, went black. First i could restart the phone. After restart i was going to bluetooth again. But, the same... After that, no more response from the phone. No, Battery LED, No Fastboot, No Recovery. The phone seems dead.
When i connect the phone to PC there is a "qualcomm hs usb qdloader 9008" device listed but no more. Miflash recognises no phone, adb is not showing.
What can i do? In which state is the Phone? EDL?
tommy536 said:
Hey Guys,
yersterday i installed thrue TWRP the LineageOS + LOS Root + Gapps. Everything was fine... till today.
I would like to enter the bluetooth settings. After then, the display recognises no touch, went black. First i could restart the phone. After restart i was going to bluetooth again. But, the same... After that, no more response from the phone. No, Battery LED, No Fastboot, No Recovery. The phone seems dead.
When i connect the phone to PC there is a "qualcomm hs usb qdloader 9008" device listed but no more. Miflash recognises no phone, adb is not showing.
What can i do? In which state is the Phone? EDL?
Click to expand...
Click to collapse
Going black for no reason is a common problem of Mi5.
It's in EDL mode.
Flash a fastboot rom and you will be okay to go.
Sent from my MI 5 using Tapatalk
Ok, thanks!
How can i flash a fastboot rom? Miflash can not find the Mi5! Have i to use a another Miflash Version?
tommy536 said:
Ok, thanks!
How can i flash a fastboot rom? Miflash can not find the Mi5! Have i to use a another Miflash Version?
Click to expand...
Click to collapse
Did you tap refresh in MI flash tool after connecting the device?device shows up only after refreshing.
Or else try this version
http://api.bbs.miui.com/url/MiFlash
Don't forget to uninstall the older mi flash before installing it.
Sent from my MI 5 using Tapatalk
Should i use the original Qualcomm drivers or the MiFlash ones?
tommy536 said:
Should i use the original Qualcomm drivers or the MiFlash ones?
Click to expand...
Click to collapse
You don't need to flash anything. Just disconnect and reconnect the battery. 2 minutes job. You can find a tutorial on YouTube.
vladimir_carlan said:
You don't need to flash anything. Just disconnect and reconnect the battery. 2 minutes job. You can find a tutorial on YouTube.
Click to expand...
Click to collapse
But after then, the warranty is lost...
How often does the Mi5 land in this mode? This is already a risk because of the use in the long term.
tommy536 said:
But after then, the warranty is lost...
How often does the Mi5 land in this mode? This is already a risk because of the use in the long term.
Click to expand...
Click to collapse
I figured that opening up sealed phone might make people scared or worry for their warranty.
Fastboot flash is easier sometimes maybe?
tommy536 said:
Should i use the original Qualcomm drivers or the MiFlash ones?
Click to expand...
Click to collapse
MiFlash automatically installs drivers.
Sent from my MI 5 using Tapatalk
tommy536 said:
But after then, the warranty is lost...
How often does the Mi5 land in this mode? This is already a risk because of the use in the long term.
Click to expand...
Click to collapse
In my case it happened very often on stock Lineage OS kernel. Never happened on Lineage while I was on DragonXia kernel or on MIUI.
OK! What can i do? Is it possible to switch the Kernel?
I have good news! Phone works after disconnect the battery. But this is not a solution.
I had after rebooting to ROM the same issue when i go to bluetooth settings. BT seems not working probably. If i go twice to BT settings the phone will brick.
Gesendet von meinem MI 5 mit Tapatalk
I had made a new installation with lineage OS without Root and mini Gapps. Now it seems, that BT will work normaly.
Hello, I was trying to update my zuk z2 pro to the version of the AEX 5.0 rom but at the installation it gave some error and my cell was blocked nothing happens, I already tried to install the rom by Qfil but it gave Sahara error and now the computer is no longer recognizing on port 9008
Someone has an idea to help me, please.
darf10 said:
Hello, I was trying to update my zuk z2 pro to the version of the AEX 5.0 rom but at the installation it gave some error and my cell was blocked nothing happens, I already tried to install the rom by Qfil but it gave Sahara error and now the computer is no longer recognizing on port 9008
Someone has an idea to help me, please.
Click to expand...
Click to collapse
Hi,reboot your computer or change USB port.
Inviato dal mio ZUK Z2121 utilizzando Tapatalk
I'm having problems with Qfil ...
It is giving the following error: "download fail: FireHose Fail FHLoader Fail: Process fail"
Any answers to what might be?
darf10 said:
Hello, I was trying to update my zuk z2 pro to the version of the AEX 5.0 rom but at the installation it gave some error and my cell was blocked nothing happens, I already tried to install the rom by Qfil but it gave Sahara error and now the computer is no longer recognizing on port 9008
Someone has an idea to help me, please.
Click to expand...
Click to collapse
Is not your version of the recovery is wrong, what version of recovery you are using?
Hi
I have also bricked my Zuk Z2 pro after trying to update the Radio Modem !!!
Now when i try to start it, i only have the Zuk logo 1 seconde and after that he shut done and reboot. he do that 5 times and after the screen stay off and i only have the led who are on (blue or red).
When i plug the Z2 to my laptop, i can see that something is connected : qualcomm 9008 something but i can't do anything...
I have try to use adb, QFIl etc... nothing....
Any idea ???
Qfil is tricky, you must setup it first and start flashing as soon as phone connects. If you let phone in EDL mode for more than few seconds than port closes (even if it says its open). I have spent half a day with that issue.....
bricked Zuk Z2 Pro
Hello, i am new here and i have a big problem with my new Zuk Z2 Pro. I have unlocked the bootloader, installed TWRP (twrp-3.2.1-0-z2_row.img) the right way (with -i 0x2b4c in it if i am right) trough windows commands. After that i flashed a Mokee rom. Al was working well. After a week i wrote about a new version of ZUI and i flashed it. Now my Zuk is bricked. The phone will start up and then freezes in the beginning when i have to set the phone. I can get it in the menu with fastboot, recovery etc, but recovery is gone. I tried to flash a stock rom with QFIL, but my pc does not recognize my phone anymore. I don't get port 9008 and can not install TWRP anymore (waiting for device). I wrote many threads and it seems the problem is the driver. But i did install the driver (at least i think i did), and all the other needed stuff.
I know it can be fixed, but i am out of solutions. Can anyone help me out please? I hope this is the right thread to ask you, but when it's not, please guide me.
Also tried to flash the device with Mi Flash, but also the device is not recognized in this tool. At the beginning it was, but now it's not anymore.
Someone know the solution to get the phone recognized by pc and get the needed port 9008?
Do i have to use the testpoint method? Hope not, because i will have to open up the phone.
Waiting for help, thank you.
Alex
Hi everyone, I have a Lenovo zuk z2 pro, and it does not go out of EDL mode
I've tried everything, all the possible key combinations, it also has no indication of any led on, it just gets the screen all black and does nothing else, when I connect it to the USB port, QFIL recognizes it in the EDL 9008 mode, can anyone help me please?
Thank you in advance for your attention.
virusib said:
Hi everyone, I have a Lenovo zuk z2 pro, and it does not go out of EDL mode
I've tried everything, all the possible key combinations, it also has no indication of any led on, it just gets the screen all black and does nothing else, when I connect it to the USB port, QFIL recognizes it in the EDL 9008 mode, can anyone help me please?
Thank you in advance for your attention.
Click to expand...
Click to collapse
When you flash zui rom with qfil it restart automatically . What about your power button ? Everything was ok before that ?
How to move from edl to fastboot
Look this
youtube.com/watch?v=2m44xKog-dI
I've used this tutorial several times.
Try it, too.
It's safe
Hi, I discovered that my USB ports on my PC are broken, sorry and TKS guys
virusib said:
Hi, I discovered that my USB ports on my PC are broken, sorry and TKS guys
Click to expand...
Click to collapse
How can a broken port ( or do u say all ports?) recognize the phone with 9008, but is unable to flash?
They apparently work, but the copy of the files don't finish 100% in qfil app, I had Sahara error, but when I tried in the computer of my cousin, everything worked ok and I could make the installation of the stock room by qfil normally.
Recently I couldn't get my PC to recognize the cell phone, I tried several cables, other pc's and even re-installed rom with test point (The only thing that works) Any suggestions?
So the phone boots and works but it isn't recognized by any pc?
I had a Mi A2 with the same problem, tried everything possible, without success ... I sold and bought another.
faffu41 said:
So the phone boots and works but it isn't recognized by any pc?
Click to expand...
Click to collapse
Yes
Have ypu changed USB mode to mtp?
my mi a2 cant connect to pc for file transfer. i tried to set default option in developer option, but the option is grey out i cant change the settings. any help on android 9
when i updated to android 10 my pc didn't recognize MTP so i had to unistall drivers and let windows to install it again
hope it helps!
faffu41 said:
Have ypu changed USB mode to mtp?
Click to expand...
Click to collapse
I can't change the options