Hello there and sorry if this was something asked 100 times. I haven't found quite something up to date.
So I've had my Mi 5 for some time now and I've decided to Root since I do need quite some features. Problem is I'm pretty scared of doing this since I've never done it before and I'd like to ask here if everything that I'm about to do is correct and if it's not I could get some steps into the right drections.
I'm on Global 9.1.1.0 (NAAMEI).
I'll be able to unlock my bootloader in exactly 10 hours since I had to wait for that stupid 72 hours lock so here's what I prepared.
From what I understand I need to flash TWRP Custom Recovery and download the specific one for my device. Their sites lists twrp-3.2.1-0-gemini.img as the latest for Mi 5 so this one I'm guessing is good to go?
I've also installed fastboot adb drivers installed, the TWRP mentioned above and I also renamed it to ''twrp'' to make things easier later on. That's how my curent folder looks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enable USB debugging from developer options, turn off my phone into fastboot my pressing volume down and the power key then connnect it to my PC via USB.
So I'm to shift right click into this very folder, open up cmd and type fastboot devices to see if my device is properly reconized it shoud show up some numbers. After that type fastboot flash recovery twrp.img then it shoud do it's thing and after that type fastboot boot twrp.img to load up TWRP.
I've put into my phone's storge the following to be ready:
- lazyflasher-no-verity-opt-encrypt.zip
- Magisk-15.3.zip
-Magisk uninstaller
After the recovery boots up I am to flash the lazyflasher and Magisk and hope my phone isn't bricked. Is this all that I need to make sure my phone will not bootload or anything like that? Thank you
Zardax said:
Hello there and sorry if this was something asked 100 times. I haven't found quite something up to date.
So I've had my Mi 5 for some time now and I've decided to Root since I do need quite some features. Problem is I'm pretty scared of doing this since I've never done it before and I'd like to ask here if everything that I'm about to do is correct and if it's not I could get some steps into the right drections.
I'm on Global 9.1.1.0 (NAAMEI).
I'll be able to unlock my bootloader in exactly 10 hours since I had to wait for that stupid 72 hours lock so here's what I prepared.
From what I understand I need to flash TWRP Custom Recovery and download the specific one for my device. Their sites lists twrp-3.2.1-0-gemini.img as the latest for Mi 5 so this one I'm guessing is good to go?
I've also installed fastboot adb drivers installed, the TWRP mentioned above and I also renamed it to ''twrp'' to make things easier later on. That's how my curent folder looks.
Enable USB debugging from developer options, turn off my phone into fastboot my pressing volume down and the power key then connnect it to my PC via USB.
So I'm to shift right click into this very folder, open up cmd and type fastboot devices to see if my device is properly reconized it shoud show up some numbers. After that type fastboot flash recovery twrp.img then it shoud do it's thing and after that type fastboot boot twrp.img to load up TWRP.
I've put into my phone's storge the following to be ready:
- lazyflasher-no-verity-opt-encrypt.zip
- Magisk-15.3.zip
-Magisk uninstaller
After the recovery boots up I am to flash the lazyflasher and Magisk and hope my phone isn't bricked. Is this all that I need to make sure my phone will not bootload or anything like that? Thank you
Click to expand...
Click to collapse
You only choose 1, either fastboot flash (replace ur existing recovery) or fastboot boot (just temp boot to twrp)... I suggest the latter...
You don't need lazyflasher with magisk, what's that for?... [emoji6][emoji6][emoji6]
Sent from my MI 5 using Tapatalk
Related
Hi friends,
i have a mate s L09 and i had 5.1.1 Lollipop on it CRR-L09C432B161 or something like that.i think it was a rom for Turkey.
i wanted to root it and installed carrera 2.8 twrp with fastboot mode but nothing changed.i could not get twrp.so i could not install supersu and i wanted to install CRR-L09C432B145 rom and my device get bootloop.
So i tried to install other roms via fastboot but nothing changed.
Then i gooogled all the net and did everything but i could't get device back.
i wanted to install twrp rtecovery but i think there is a problem and no rom or recovery got installed.
Now:
1-i don't know which rom was installed on it.CRR-L09C432B161 or something else.
2-i can not install any rom or recovery.(i did many times to extract with Huawei extract tool cust,boot,recovery,system and installed with fastboot but nothing)
3-My device's bootloader is unlocked but i don't know FRP is locked or unlocked(the pic is under)
4-Maybe FRP is locked and i can not install anything becouse of it,i do not know
5-My compuer can't load the device,all the adb drivers installed,no problem.i changed cable and sd card but same problem.
Please help me.i can not use my device.
The pics:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
]
The Fastboot picture is to small. Can´t read what´s written there but i guess your device is FRP locked since there are two red texts/lines on the bottom side.
The only thing you could try is placing the right Update.App on an SD card and do an forceupdate via Vol+/- and Power. Since you don´t know the original Build, you have to try different files until one works.
Tuerkay said:
The Fastboot picture is to small. Can´t read what´s written there but i guess your device is FRP locked since there are two red texts/lines on the bottom side.
The only thing you could try is placing the right Update.App on an SD card and do an forceupdate via Vol+/- and Power. Since you don´t know the original Build, you have to try different files until one works.
Click to expand...
Click to collapse
Hi,thanks for your reply,
i tried many times that solution.when i do volume+/ and power device get Huawei's erocovery and i press the "update with internet" it says "no wireless found".the other alternatives are "power off" and "reset".
PS:Yes,you're right in the second image,it says:
PHONE Unlocked
FRP Unlock
with red color.
If there is "PHONE Unlocked" and "FRP Unlocked" written on the Fastboot screen, you can flash a new system. Extract System.img Recovery.img boot.img and cust.img from an Update.App and flash via fastboot. To be able to do that, you should search for "Minimal ADB and Fastboot Driver" in the XDA Forum and instal that.
Tuerkay said:
If there is "PHONE Unlocked" and "FRP Unlocked" written on the Fastboot screen, you can flash a new system. Extract System.img Recovery.img boot.img and cust.img from an Update.App and flash via fastboot. To be able to do that, you should search for "Minimal ADB and Fastboot Driver" in the XDA Forum and instal that.
Click to expand...
Click to collapse
ADB drivers all installed.Phone unlocked but it says "FRP Unlock".Not FRP unlocked.i flashed many times new system. Extracted System.img Recovery.img boot.img and cust.img from an Update bu nothing changed.i think they can not installed.
i tried many different roms..B145,B321,B114.And i tried to install twrp recovery but nothing changed again.
i tried all adb command to erase local stroge but isays the command are false.
and i forget to say:my computer can not see the device.it says "device not found".i uninstall the adb drivers and install again the last driver but nothing changed.
Any other way to install rom?
Or if i have to unlock FRP can i install rom?i don't know muck more about the Huawei system.
i upload images again.
You have to use fastboot commands in fastboot Mode. ADB commands wont work. Plug in your Phone. Open device Manager on your pc. Look for "android device". Remove Driver. Unplug Phone. Install "minimal adb and fastboot". Reboot pc. Plug j. Phone. Pc should find Phone now.
Minimal Adb and fastboot drivers also installed.My device shown like this at the device manager.
And i wrote wrong i tries always fastboot commands,sorry.
altanis said:
Minimal Adb and fastboot drivers also installed.My device shown like this at the device manager.
And i wrote wrong i tries always fastboot commands,sorry.
Click to expand...
Click to collapse
contact me, i can solve your problem
mutahharbashir said:
contact me, i can solve your problem
Click to expand...
Click to collapse
Thank you for your reply @mutahharbashir,
but i did not solve the problem and sold my phone.
I'm trying to unlock bootloader. Checked all options in dev options like USB debugging and enable unlock bootloader.
Installed all the drivers. Booted into bootloader.
But when trying to see "adb devices", it doesn't show any devices.
For sometime, it shows some kedacom usb driver. I tried googling and tried to uninstall it and use google driver also. Even in device manager, it shows Android Device - Android ADB Interface, but still it shows nothing in list of devices attached in adb.
Also tried this thread - https://forums.oneplus.net/threads/solved-adb-is-not-working.347296/, but still doesn't work. Can someone help me out here?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do you have TWRP installed? In that case flashing Super Su or Magisk from within TWRP should get you rooted. If TWRP isn't installed, Check for Funk Wizards thread in the official forum https://forums.oneplus.net/threads/...a-help-thread-ask-your-questions-here.477285/
Also, adb doesn't work from bootloader. It's fastboot in the bootloader. Enter recovery and check then
Seems like your phone is in bootloader/fastboot mode instead of in-rom ADB or TWRP ADB mode. This is the mode you're phone has to be in to be able to flash other recoveries like TWRP which however also requires your phone to be OEM bootloader unlocked (which completely wipes your phone), and from there you enter TWRP recovery using bootloader menu or power plus volume down, and there flash the latest 2.79 SR3 SuperSU to archive root/sudo functionality.
Either that or you actually did activate ADB under development options and accidentally installed the ADB device using the fastboot/bootloader driver instead of the ADB device driver.
When your in fastboot, you need to use fastboot devices as the command and other fastboot commands. You use adb devices command when your using adb, and connected with phone in recovery or booted.
I just installed the drivers that are on the phone when you plug it in in windows and minimal adb and fastboot from xda.
Thank you all. I followed ur inputs and now it worked fine. I installed a custom rom too.
Thanks again.
Akhyll said:
Thank you all. I followed ur inputs and now it worked fine. I installed a custom rom too.
Thanks again.
Click to expand...
Click to collapse
Excellent, enjoy.
Hello there
I think i did somethinh wrong while trying to install twrp. Now when it boots it stays stuck on twrp screen, i cant switch it off. If i try, it will boot again on twrp screen. But i can boot it on fastboot mode.
I tryed with adb commnds to reinstall twrp but it does not recocnize dhe device when the phone is in fastboot mode.
If i boot the phone on the stuck twrp screen it is recognized by adb but it does not executes any command.
Eventually i thought trying to clean flash the stock rom will fix everything and i can try again with a fresh start. But the mi flash gives error,; flashing is not allowed for critical partitions.
The bootloader is unlocked.
Your browser is not able to display this video.
Try flashing your original boot.img (that worked with your current ROM version) back to the device from Fastboot.
Andrologic said:
Try flashing your original boot.img (that worked with your current ROM version) back to the device from Fastboot.
Click to expand...
Click to collapse
Thnx for the suggestion. But as i said the phone does not respont to adb commands.
biqe said:
Thnx for the suggestion. But as i said the phone does not respont to adb commands.
Click to expand...
Click to collapse
Not adb. You need to be in bootloader mode with Fastboot access to be able to flash boot back. Power up the device in bootloader mode with the vol+power buttons and confirm that your device has Fastboot access (e.g 'fastboot devices' returns your device id). Flash your boot from there. If Fastboot access is impossible, it's a bigger issue but try that first...
Andrologic said:
Not adb. You need to be in bootloader mode with Fastboot access to be able to flash boot back. Power up the device in bootloader mode with the vol+power buttons and confirm that your device has Fastboot access (e.g 'fastboot devices' returns your device id). Flash your boot from there. If Fastboot access is impossible, it's a bigger issue but try that first...
Click to expand...
Click to collapse
When i try vol+power it boots on twrp and stays like that
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update. It loks like using adb was the problem. But using the platform tools i could execute comands and i fixed the issue. The phone is clean and i could flash the stock rom with mi flash.
biqe said:
Update. It loks like using adb was the problem. But using the platform tools i could execute comands and i fixed the issue. The phone is clean and i could flash the stock rom with mi flash.
Click to expand...
Click to collapse
Hello, i have the same problem. Did you use only mi flash to resolve the issue?
Mi A2 does not have /recovery partition, a recovery is a part of the /boot image, and thus TWRP is not to be "flashed" into /boot (or absent /recovery), but can be "patched" into /boot installing appropriate .ZIP file in a temporarily booted TWRP (tip: search Guides).
This "revelation" could be found in many threads / guides in this forum - search could help you.
As well as "revelations" answering your question:
AndroidOne devices do not need any MiFlash (except for testpoint unbricking, tip: search Guides), if bootloader and critical partitions are unlocked, just normal fastboot.exe from latest Android platform-tools (tip: search in Guides).
Hello guys..
I have a Redmi note 10 5g global and was trying to fastboot flash Indonesian ROM using Mi Flash Tool ,it started well and stopped due Preloaded error, I tried again but it persisted so I unplugged my device and tried powering it up but it wont power on,won't show charging but only makes sound when Connected to PC,I tried alot of things to fix the Preloaded but with no success.
I badly need help To fix this problem guys..
dannykuma said:
Hello guys..
I have a Redmi note 10 5g global and was trying to fastboot flash Indonesian ROM using Mi Flash Tool ,it started well and stopped due Preloaded error, I tried again but it persisted so I unplugged my device and tried powering it up but it wont power on,won't show charging but only makes sound when Connected to PC,I tried alot of things to fix the Preloaded but with no success.
I badly need help To fix this problem guys..
Click to expand...
Click to collapse
try booting into fastboot, if not, boot into brom and flash stock miui via sp tool
open up device manager to make sure everything is right.
boot into brom by holding VOL-, VOL+ and POWER, at the same time connect the phone to ur pc. if it does the connected sound, check on device manager if the driver is missing. it should have a warning sign, if it does then install the drivers i annexed below the post (ive used them and it worked, up to u)
after installing them, by the meantime ur phone probably has restarted, so reboot it into brom once again and check devices manager. if it worked it should look something like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
with sp tool ready to flash. but first you might need to auth bypass because of MIUI account.
1lopes said:
try booting into fastboot, if not, boot into brom and flash stock miui via sp tool
open up device manager to make sure everything is right.
boot into brom by holding VOL-, VOL+ and POWER, at the same time connect the phone to ur pc. if it does the connected sound, check on device manager if the driver is missing. it should have a warning sign, if it does then install the drivers i annexed below the post (ive used them and it worked, up to u)
after installing them, by the meantime ur phone probably has restarted, so reboot it into brom once again and check devices manager. if it worked it should look something like this:
View attachment 5733123
with sp tool ready to flash. but first you might need to auth bypass because of MIUI account.
Click to expand...
Click to collapse
Thank you very much for the help....
Let me try
indonesian rom is fully compatible. sure u made something bad.
your bootloader is unlocked???? u have downloaded fastboot version? clean flash selected? write al steps u did with precision. i'm 100% sure is not a compatibility problem. i have installed indonesian rom more then one time without any problems
IF U CAN ENTER INTO FASTBOOT, U CAN RESTORE YOUR PHONE WITHOUT PROBLEMS. stay away from advanced procedures like restore preloader. First try the easyest solutions. If didnt work i suggest mtkclient under arch linux for reflash boot vbeta and preloader. But follow my tip: enter into fastboot and reflash stock using adbdastboot tool. Is the easyest solution
Hello. I have unlocked my bootloader last night and flashed my redmi note 10 pro max through fastboot mode today. After flashing xiaomi.eu_multi_HMNote10Pro_V14.0.2.0.TKFMIXM_v14-13 rom, my phone started rebooting, MIUI 14 logo appears but suddenly it went into recovery mode directly within 04-05 seconds. Now if I reboot the phone, it opens but after 04-05 seconds it again went into recovery mode. I tried wipe out and safe mode option too. The scenario is the same for both cases. Asking for your help regarding this
Rabbi_RN10promax said:
Hello. I have unlocked my bootloader last night and flashed my redmi note 10 pro max through fastboot mode today. After flashing xiaomi.eu_multi_HMNote10Pro_V14.0.2.0.TKFMIXM_v14-13 rom, my phone started rebooting, MIUI 14 logo appears but suddenly it went into recovery mode directly within 04-05 seconds. Now if I reboot the phone, it opens but after 04-05 seconds it again went into recovery mode. I tried wipe out and safe mode option too. The scenario is the same for both cases. Asking for your help regarding this
Click to expand...
Click to collapse
I think you dl'd the global stable, not EEA for EU. You want the 14.0.3.0 for EU.
Sheist! said:
I think you dl'd the global stable, not EEA for EU.
Click to expand...
Click to collapse
yes may be. what to do now? how can i flash any other rom?
Put on your phone and try the Apply Update from your recovery. I believe it looks in the downloaded_rom folder in Downloads on internal SD.
There is no such things like apply update in the recovery mode.
how can i flash custom recovery without turning on USB Debugging? as I can't open my mobile right now I ain't able to turn on the usb debugging. please suggest
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Correction. The downloaded_rom folder is not in Downloads, but beside it in the root of internal C. Try creating that folder in Windows with the phone connected and put the file in there then reboot and see if it installs automatically. If not or you do not see the phone in Windows, then you can flash the version of TWRP for your phone using the official TWRP source location and install from it. You stated it is unlocked already, and USB Debugging may not be a problem since this is a stock MIUI ROM. Use the 3.7.x from twrp.me.
Can you still get fastboot? If that case, I'd revert to stock with MiFlash and start again...
pnin said:
Can you still get fastboot? If that case, I'd revert to stock with MiFlash and start again...
Click to expand...
Click to collapse
I can get to fastboot mode. but as my usb debugging is off, my pc doesn’t recognize my device.what to do then?
Don't quote me on this, but I think MiFlash doesn't need USB debug, only the right drivers.
pnin said:
Don't quote me on this, but I think MiFlash doesn't need USB debug, only the right drivers.
Click to expand...
Click to collapse
will try then. thanks!
Try flashing TWRP without USB Debugging from fastboot. It might work. Then you can flash your install file inside it, which being MIUI, it should not require USB Debugging either.
hello, to use fastboot you don't need usb debugging, usb debugging works with user confirmation only with the system started, instead, in custom recovery it works automatically, if you want to restore your smartphone, you can do it by downloading the latest miui fastboot for your device from here: https://xiaomifirmwareupdater.com/
once you download the right package (be careful what you download!), you will have to flash the rom via fastboot, you can use mi flash if you are comfortable with it, be careful with the options below, if you leave "flash and lock" it will flash, but it will lock the bootloader, if you don't want to lock it, select "clean all". good luck