From the reviews on Amazon it appears the Spigen ruggard armor lifts the pre applied screen protector?
You need a flat 2D one. The only one I've found out of the five I've tried so far that actually sticks everywhere is the Nillkin brand.
Amazon Link, OnePlus 5T Tempered Glass Screen Protector, Nillkin Anti-fingerprints Super Clear 0.33mm Ultra Thin 9H Screen Hardness Screen Protector for OnePlus 5T (2017)
It was the most expensive one I ordered, but it actually stuck around all the edges.
https://www.amazon.com/Spigen-OnePl...=1517339152&sr=8-4&keywords=spigen+oneplus+5t
You're welcome
PShin said:
https://www.amazon.com/Spigen-OnePl...=1517339152&sr=8-4&keywords=spigen+oneplus+5t
You're welcome
Click to expand...
Click to collapse
Have you used this? Comments on how it fits, any problems?
xgerryx said:
Have you used this? Comments on how it fits, any problems?
Click to expand...
Click to collapse
From the reviews you need a perfect installation
xgerryx said:
Have you used this? Comments on how it fits, any problems?
Click to expand...
Click to collapse
No I haven't tested it yet because it's not available In Europe yet. However, there's a review here : https://www.youtube.com/watch?v=N4X7eonaa3Y
Since you got a spigen case, you should be happy with this glass tempered.
worldsoutro said:
From the reviews you need a perfect installation
Click to expand...
Click to collapse
Got the Spigen combo, but glass doesn't sit firm around the edges and I pretty much lined it up perfectly in the center. Will try 2nd glass, but already disappointed.
M5devil said:
Got the Spigen combo, but glass doesn't sit firm around the edges and I pretty much lined it up perfectly in the center. Will try 2nd glass, but already disappointed.
Click to expand...
Click to collapse
I saw a video on YouTube where a guy dipped an earbud in olive oil and dabbed it on the edges , somehow the halo effect disappeared , so you may try that .
Skinomi plastic film screen protector was a fail with this case. It was a huge pain to get on, needed to use a hair dryer to get the sides to stick. The next morning I put the case on and immediately the sides bubbled up and would not stay down. Anyone find a plastic one that works with the rugged armor case?
xgerryx said:
Skinomi plastic film screen protector was a fail with this case. It was a huge pain to get on, needed to use a hair dryer to get the sides to stick. The next morning I put the case on and immediately the sides bubbled up and would not stay down. Anyone find a plastic one that works with the rugged armor case?
Click to expand...
Click to collapse
Just to add, I have the same issue with the Invisibleshield plastic screen protector and this case. Dam unfortunate as I love the case.
Any ideas how the IQ Liquid Shield fares:
http://www.iqshield.com/iq32638-oneplus-5t-phone-screen-protector.html
SlyUK said:
Any ideas how the IQ Liquid Shield fares:
http://www.iqshield.com/iq32638-oneplus-5t-phone-screen-protector.html
Click to expand...
Click to collapse
never buy that ****. its the worst thing. dont ask why its just way to ****ed up to explain.
You're going to have problems with anything that goes all the way to the edges, that case overlaps. Anything the case touches will eventually have problems.
If you want a 3D style screen protector that covers the entire screen, you are going to be stuck with the factory one plus cases. If you want Spigen case and a screen protector that sticks for any length of time, you will have that small gap all the way around between the case and the screen protector.
As I already mentioned the only 2D screen protector, I've found that stuck all the way around (IE no "halo effect") was the Nillkin brand.
If you find something that actually works, let us know. I ordered two of the Spigen cases, I've thought about taking the second one and carefully cutting it back some so it would clear a 3D screen protector. I'm just not sure if it would stay on that well after that.
M8, pick up the Nillkin TG, H+ Pro. Its really good and im a person who likes when things are esthetic. It doesn't cover whole screen though.
Wysłane z mojego ONEPLUS A5010 przy użyciu Tapatalka
Related
Hi All,
My preferred phone protection is to have a tempered glass screen protector and silicone case. Saved my old phone from bad damage a couple times while bouncing on the street.
Now... the challenge I have with the P9000 is that the silicone case that came with the phone doesn't go 'over' the edges of the tempered glass protector and pushes it off.
rather annoying!
Ordered some other silicone cases on Aliexpress but the same problem.
Anybody found a nice case that does the trick? Tried 'heat stretching' the case a bit for a better fit but no luck so far.
thanks!
BuDDaH said:
Hi All,
My preferred phone protection is to have a tempered glass screen protector and silicone case. Saved my old phone from bad damage a couple times while bouncing on the street.
Now... the challenge I have with the P9000 is that the silicone case that came with the phone doesn't go 'over' the edges of the tempered glass protector and pushes it off.
rather annoying!
Ordered some other silicone cases on Aliexpress but the same problem.
Anybody found a nice case that does the trick? Tried 'heat stretching' the case a bit for a better fit but no luck so far.
thanks!
Click to expand...
Click to collapse
yup same problem. i cut the case a bit and now it dont look nice . but it works.
Hi.
My problem was that one corner of the glass doesn't stick to the LCD. After I applied the silikoncase it fits.
I have the case that come with the phone.
I stretched it a little bit over the corners of the phones without heat.
Greetings
vsrookie said:
Hi.
My problem was that one corner of the glass doesn't stick to the LCD. After I applied the silikoncase it fits.
I have the case that come with the phone.
I stretched it a little bit over the corners of the phones without heat.
Greetings
Click to expand...
Click to collapse
Had the same issue what you need to do is force phone by slotting it into case then pull the lip over the screen protector. Do this to all corners and you'll have no issues.
vsrookie said:
Hi.
My problem was that one corner of the glass doesn't stick to the LCD. After I applied the silikoncase it fits.
I have the case that come with the phone.
I stretched it a little bit over the corners of the phones without heat.
Greetings
Click to expand...
Click to collapse
Congrats on having it fixed without any drastic measures! I went the 'cutting route' for now since I had to replace the screen protector and didn't want to risk another one.
But I've got another set of silicone cases coming from aliexpress to check if they are a bit better!
I've got 2 P9000's (one for me one for my girlfriend) so actually I already wrecked 2 screen protectors.
Same problem here. Original case and aliexpress case. No luck.
i bought the official flip case and tempered glass.
tried the case first which fit but found the buttons a bit hard to press.
if you fold the case front behind the phone the camera is blocked also.
could view the on screen clock and notifications through the case screen window.
once applied the tempered glass the phone wouldn't recognize the flip case, so when i closed it over the screen remained on and the case window became useless.
this company do nothing right do they.
Had to struggle the same problem, but now i could fix it.
Just make sure the glass is positioned in centre on the screen. When putting on the case, make sure the case slips properly over the first 3 corners. For the last one, you can use any tool (i a used knife, but be careful ) to overlap the edge of the silicon case with the tempered glass.
No matter what I did, it wouldn't do it without lifting the glass
Sent from my P9000 using Tapatalk
I have the same issue (sometimes) with matte film protectors and the standard case.
Always on the top right corner for me - where I've got fractionally less unprotected screen , so maybe very precise alignment of the screen protector would help you?
Pulling the case over the edge of the screen with my fingernails was enough for me
Cut the flip in the flip-case.
BuDDaH said:
Hi All,
My preferred phone protection is to have a tempered glass screen protector and silicone case. Saved my old phone from bad damage a couple times while bouncing on the street.
Now... the challenge I have with the P9000 is that the silicone case that came with the phone doesn't go 'over' the edges of the tempered glass protector and pushes it off.
rather annoying!
Ordered some other silicone cases on Aliexpress but the same problem.
Anybody found a nice case that does the trick? Tried 'heat stretching' the case a bit for a better fit but no luck so far.
thanks!
Click to expand...
Click to collapse
Cut the flip in the flip-case. Just kepping the hard back. This way you can use the glass and have back protection. I did this and works fine.
I use this glass protector - http://www.ebay.com/itm/282044598237?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
there is a space between the silicon case and the glass so they don't touch each other
sluiz said:
Cut the flip in the flip-case. Just kepping the hard back. This way you can use the glass and have back protection. I did this and works fine.
Click to expand...
Click to collapse
The hard back in the flip case is useless. Too fragile, corners and button covers break easily, my P9000 fell just once not too hard and the screen left upper corner broke. Silicone cover is better protection
u can use scotch tape on the bottom corners of the glass to stop it from lifting, funny idea but works, if u want to save a new case cost.
I really like the Spigen Rugged Armor Case for OP3 - https://www.amazon.com/gp/product/B0...A2SFKRF5TPZMT5
But I'm worried the tempered glass i want to get won't go well with it. The Yootech one - https://www.amazon.com/gp/product/B0...A3KGQHS00G2MDY
Should i just go for a regular screen protector since the case already has some leap in front? Like the ArmorSuit one - https://www.amazon.com/gp/product/B0...A3LQSX85N730QN
Need to order them soon. Replies will be appreciated.
I had the non TG from yootech and it was trash. Didn't stick well left tons of adhesive on the top of screen protector after peeling the top layer off.
Still waiting for something with decent reviews, but now I don't even have the OEM protector on.
aeryl said:
I had the non TG from yootech and it was trash. Didn't stick well left tons of adhesive on the top of screen protector after peeling the top layer off.
Still waiting for something with decent reviews, but now I don't even have the OEM protector on.
Click to expand...
Click to collapse
I am worried about those tempered glass protectors to be honest. Anything that causes air bubbles or rainbow effect, i will rip off quickly i'm sure
I'm probably just going to get another plastic screen protector and use that til a good TG one comes out. I really like the rugged armor case too and don't plan to use anything else except maybe the neo hybrid spigen case.
aeryl said:
I'm probably just going to get another plastic screen protector and use that til a good TG one comes out. I really like the rugged armor case too and don't plan to use anything else except maybe the neo hybrid spigen case.
Click to expand...
Click to collapse
I guess i just have to make a decision between Neo Hybrid and Rugged Armor. Already decided to get this plastic screen protector - https://www.amazon.com/gp/product/B..._title_dp_2?ie=UTF8&psc=1&smid=A3ERO5WWGZCNON
I am in the same situation here in India. Bought the spigen rugged armor case. Liked it so much that I'm still Sticking to the stock plastic scratch guard. But I believe no tempered glass would work fine with this case. Any ideas?
Yep i'm in the same boat. Currently using spigen with stock screen protector as well. I usually dont care about the front glass as I am with the back but I recently found some people had their display broke so i'm a bit nervous about that.
corrupt1234 said:
Yep i'm in the same boat. Currently using spigen with stock screen protector as well. I usually dont care about the front glass as I am with the back but I recently found some people had their display broke so i'm a bit nervous about that.
Click to expand...
Click to collapse
abhibnl said:
I am in the same situation here in India. Bought the spigen rugged armor case. Liked it so much that I'm still Sticking to the stock plastic scratch guard. But I believe no tempered glass would work fine with this case. Any ideas?
Click to expand...
Click to collapse
I went with The Spigen Neo Hybrid as i got a plastic screen protector. So i hope the sturdier case will compensate.
any standard TG will do. I used to use it with Oneplus 1st gen TG and it fit well with the case
otonieru said:
any standard TG will do. I used to use it with Oneplus 1st gen TG and it fit well with the case
Click to expand...
Click to collapse
I heard that TG was bad. Had issues
stanley08 said:
I heard that TG was bad. Had issues
Click to expand...
Click to collapse
I would get that, but don't want to lose even 5mm of screen space. It's not a big deal, but it would annoy me.
The phone feels and looks great with the Rugged Armor case so I don't wanna buy another just so I can use Tempered Glass. I'd just keep the OEM protector on until TG compatible with this case comes out.
aeryl said:
I would get that, but don't want to lose even 5mm of screen space. It's not a big deal, but it would annoy me.
The phone feels and looks great with the Rugged Armor case so I don't wanna buy another just so I can use Tempered Glass. I'd just keep the OEM protector on until TG compatible with this case comes out.
Click to expand...
Click to collapse
This is why i opted for the Neo Hybrid instead of the TPU Rugged Armor. Because i need more protection if i got only a plastic protector on.
I know this thread is pretty old but any luck in finding a Tempered Glass screen protector that plays nice with the rugged admor case? I still can't find one that seems to be compatible.
The icheckey is fine, and there are two in the pack. I got mine from Amazon.
Scarface1991 said:
I know this thread is pretty old but any luck in finding a Tempered Glass screen protector that plays nice with the rugged admor case? I still can't find one that seems to be compatible.
Click to expand...
Click to collapse
I used orzly (as i used them on opo and op2 and they were simply the best) and they are good.
Bought them on amazon, 2 pieces pack.
Be sure to buy orzly v2 'casue v1 wasn't compatible with most armors
urgali said:
I used orzly (as i used them on opo and op2 and they were simply the best) and they are good.
Bought them on amazon, 2 pieces pack.
Be sure to buy orzly v2 'casue v1 wasn't compatible with most armors
Click to expand...
Click to collapse
Orlzly v 2 is the only one that works with a Spigen rugged armor, two pack normally, I've tried them all.
RhinoShield hit the spot for me
I was going through this thread to see what screen protectors and cases you all people use as a kind of recommendation for my next case and screen protector. But all you people are scattered in different posts discussing things.
So lets make things easy for everyone.
Post your current setup (the past one as well if you want) and your view about that. And the links and some photos would be loved for sure. :good:
.
.
And a thanks if this thread helps you get a case or skin or screen protector in future :laugh:
Am myself using Bracevor wallet cover with the the stock screen film. No skin whatsoever. (planning to change this all soon)
Amazon India: http://www.amazon.in/Bracevor-BROPL3ELLCBR-Premium-Leather-Cover/dp/B0157OUT7C
The oem carbon fiber case paired with the oem curved screen protector is absolutely perfect. Can't even feel the seam between the glass and case. I hate cases in general, but I adore this setup.
Using the orzly multifunction wallet with the official tgsp.
Works a treat.
Sent from my ONEPLUS A3003 using Tapatalk
Sandstone case and nude screen. Can't stand screen protectors
Using the OtterBox case from OnePlus with the official curved tempered glass protector. I love the case, but I botched the TGSP installation, so I'll probably end up ordering a new one.
Rhinoshield bumper with matte nilikin guard
blotting.paper said:
Rhinoshield bumper with matte nilikin guard
Click to expand...
Click to collapse
How's the day to day usage with bumper case? Is it worth the money? Any comparison with other cases you have used?
The main reason for getting the case was to showcase the metal back of the op3. And it does that beautifully.
The quality is great, however its a bit loose on the sides (by no means it will pop out, needs considerable effort) due to which sometimes the alert slider does not work, you have to press and move it. Is not noticeable unless you pull at the sides.
Does not add any thickness overall apart from the upper and the lower lip on the back. However the phone feels a bit broader in hand.
Overall happy, although pricey for 1700 inr ordered via their site 5$ discount covered the shipping.
I also have the sandstone and spigen tough armor.
blotting.paper said:
The main reason for getting the case was to showcase the metal back of the op3. And it does that beautifully.
The quality is great, however its a bit loose on the sides (by no means it will pop out, needs considerable effort) due to which sometimes the alert slider does not work, you have to press and move it. Is not noticeable unless you pull at the sides.
Does not add any thickness overall apart from the upper and the lower lip on the back. However the phone feels a bit broader in hand.
Overall happy, although pricey for 1700 inr ordered via their site 5$ discount covered the shipping.
I also have the sandstone and spigen tough armor.
Click to expand...
Click to collapse
I ordered mine last week. Still havent received
Does it go along with preapplied screen guard or will pop out? Have you tried 1+ official curved/plain screen protector with rhinoshield? I have plain one, thinking to using it with rhino bumper
silentkiller143 said:
I ordered mine last week. Still havent received
Does it go along with preapplied screen guard or will pop out? Have you tried 1+ official curved/plain screen protector with rhinoshield? I have plain one, thinking to using it with rhino bumper
Click to expand...
Click to collapse
I have always used a nilikin matte protector, had no trouble with any of the cases i have used.
I received mine after 15 days
blotting.paper said:
I have always used a nilikin matte protector, had no trouble with any of the cases i have used.
I received mine after 15 days
Click to expand...
Click to collapse
15 days Gonna have to wait for some more time then.
Can you give me link to this screen protector. cant find it on amazon.in
silentkiller143 said:
15 days Gonna have to wait for some more time then.
Can you give me link to this screen protector. cant find it on amazon.in
Click to expand...
Click to collapse
Out of stock at the moment.
http://www.amazon.in/Original-Nillk...scsubtag=769f1abc-2431-46a1-9b97-1585df1433f8
blotting.paper said:
Out of stock at the moment.
http://www.amazon.in/Original-Nillk...scsubtag=769f1abc-2431-46a1-9b97-1585df1433f8
Click to expand...
Click to collapse
Ok. Thanks!
blotting.paper said:
Out of stock at the moment.
http://www.amazon.in/Original-Nillk...scsubtag=769f1abc-2431-46a1-9b97-1585df1433f8
Click to expand...
Click to collapse
Buy the gadgetshieldz screen protector. It is also film type one and durable too. Also it gives you the option of full phone film.
I have ordered one because my onePlus3 has many scratches one the surface, but the protector has reduced the display quality. Is there any screen protector that does not reduce the display quality? I have removed the protector, because for me it is better with scratches on the display than having reduced contrast by protector.
By the way, i never had scratches on any Phone display. The resistance to scratches seems to be very bad on this phone.
Köppchen said:
I have ordered one because my onePlus3 has many scratches one the surface, but the protector has reduced the display quality. Is there any screen protector that does not reduce the display quality? I have removed the protector, because for me it is better with scratches on the display than having reduced contrast by protector.
By the way, i never had scratches on any Phone display. The resistance to scratches seems to be very bad on this phone.
Click to expand...
Click to collapse
Gadgetshieldz. Try there screen protector
Using no case, only using a gadgetshieldz screenprotector which you hardly notice. Best screen protector around IMO.
Roykooiman said:
Using no case, only using a gadgetshieldz screenprotector which you hardly notice. Best screen protector around IMO.
Click to expand...
Click to collapse
Yes that's true. I too vote them as the best screen protector currently available for oneplus 3/3T
Roykooiman said:
Using no case, only using a gadgetshieldz screenprotector which you hardly notice. Best screen protector around IMO.
Click to expand...
Click to collapse
But it doesnt protect against falls does it? THE screen will crack..😣
Has anyone found one that works yet ? I hear Whitestone dome is a no go.
Thanks
LT1UltraZ said:
Has anyone found one that works yet ? I hear Whitestone dome is a no go.
Thanks
Click to expand...
Click to collapse
I'm using a case friendly skinomi HD clear. the matte fits as well but I didn't like it.
Sent from my SM-N950U using Tapatalk
I got a zagg one from best buy. Expensive but zero problems since it's been on. The very edges have adhesive that is visible on the curved sides making a slight line. Not a deal breaker but it is there. No halo effect like I had on the note 5 protectors either. Expensive but I'm very happy so far.
Tech armor glass does.
The defender series for the note 8 works with the whitestone dome glass...
ange.mariie said:
The defender series for the note 8 works with the whitestone dome glass...
Click to expand...
Click to collapse
Any proof you could share by chance
I use the Zagg InvisibleShield HD
The edges don't stay down the best, but it works well with the Otterbox Defender case.
faded03cobra said:
Tech armor glass does.
Click to expand...
Click to collapse
Do you have a picture with the case on? I have the defender also and looking for a tempered glass
The problem you will find with most glass protectors is they typically only have adhesive around the edges. This means there is a gap between the protector and the screen and this decreases sensitivity. I'd look for a new case that works with Dome Glass. Cases are a dime a dozen but glass protectors with full adhesive are very limited. I typically buy UAG cases but only the Monarch UAG works with the Dome Glass. There are 3 YouTube videos that go through compatible cases for Dome Glass.
AlexanderBlaQ said:
Any proof you could share by chance
Click to expand...
Click to collapse
Sure, the case comparability test by mobile fun on YouTube. My case is yet to arrive, as soon as it does I'll put up pictures.
ange.mariie said:
Sure, the case comparability test by mobile fun on YouTube. My case is yet to arrive, as soon as it does I'll put up pictures.
Click to expand...
Click to collapse
Thanks I'll have to check that out
Otterbox has the Alpha Glass out already.. Was going to get a defender + alpha glass if I didnt already have a UAG plasma
Dont waste your money
ALPHA GLASS FOR NOTE 8 This is the WORST designed screen protector. It causes a major loss in screen sensitivity, to the point of having to tap screen several times, and press down with a good deal of pressure to get the screen to respond. There is a large gap at both top and bottom of screen. Adhesive is CLEARLY visable on all borders of the protector. I am extremely disappointed in the design of this! I have used alpha glass protectors before on my Samsung galaxy s8+ and was looking forward to the release of this one. I will be telling everyone i know to steer clear of this product! DO NOT WASTE YOUR MONEY~ YOU MIGHT AS WELL FLUSH IT DOWN THE TOILET~ I am a faithful customer of Otterbox, I love their cases, but this screen protector does not live to otterbox brand. I will stay a customer with their cases, but I will NEVER again purchase an alpha glass!
Otterbox defender & whitestone dome match made in heaven
So I just finished installing my whitestone dome glass protector, what a great system, 1st one failed cos of my error but second time worked sweet as. All cured and sitting pretty, absolutely no touch screen lag very responsive and very nice to use, wouldn't even know there was anything on the screen.
My case of choice is the otter box defender, I'm hard on my phones and with the note 8 almost costing a mortgage deposit, I want it well protected. Both the whitestone and the defender case appears to be made for each other, the edge of the protector sits almost flush with the top part of the case = perfect fit. No lifting no nothing. It's amazing to say the least..
The corners are actually protected by the corners of the case and it's like the case holds the glass even more secure, again no lifting or anything.
Hope this helps some of you out. I'm happy to supply pictures if any of you guys need.
Happy protecting everyone..
ange.mariie said:
So I just finished installing my whitestone dome glass protector, what a great system, 1st one failed cos of my error but second time worked sweet as. All cured and sitting pretty, absolutely no touch screen lag very responsive and very nice to use, wouldn't even know there was anything on the screen.
My case of choice is the otter box defender, I'm hard on my phones and with the note 8 almost costing a mortgage deposit, I want it well protected. Both the whitestone and the defender case appears to be made for each other, the edge of the protector sits almost flush with the top part of the case = perfect fit. No lifting no nothing. It's amazing to say the least..
The corners are actually protected by the corners of the case and it's like the case holds the glass even more secure, again no lifting or anything.
Hope this helps some of you out. I'm happy to supply pictures if any of you guys need.
Happy protecting everyone..
Click to expand...
Click to collapse
Could you keep us updated on your experience with this? A lot of other people have concluded that if the case is in contact with the screen protector, it will start lifting at some point.
I was using tempered glass screen guard on my Note 8. However I dropped the phone twice from a height of about 2/2.5 feet and the screen guard cracked. I am now using Samsung original clear view case for Note 8. Should I use glass screen guard with the clear view case?
kdatale said:
I was using tempered glass screen guard on my Note 8. However I dropped the phone twice from a height of about 2/2.5 feet and the screen guard cracked. I am now using Samsung original clear view case for Note 8. Should I use glass screen guard with the clear view case?
Click to expand...
Click to collapse
The screen protector is supposed to crack so your phone screen doesn't. My advise, if you like your note 8 put a screen on it! ?
Cut out your defender inner plastic
I've already wasted one expensive tempered glass (Araree tempered glass made in Korea, $29.99 + $8 international shipping to US).
When I used this expensive protector, there was some portion overlapped with Depender's inner plastic. Actually it made the tempered glass broken in the edge side.
So, what you can do is, using the sharp nife cut out Defender's plastic edge side where it contacts with glass screen protector. If you do this carefully, it won't look ugly. Or you can use the sand paper to remove some edge portion of plastic.
This Araree tempered glass (full cover) works great with Spigen neo hyprid case. No lift nor sensitivity loss.
I also found that Otterbox defender case works with Sammy's faster charger if we put the phone in the exact middle of the charger and with the charger plate is in plat position. But if we try to charge the phone with the charge plate is in vertical position, there was no way to charge the phone...
Wish I could have read this before I tried the UAG Prism case with the Best Buy installed Zagg glass protector. Cracked the upper left edge of the protector. I have an Otterbox Defender on and it's good. Unfortunately, right from the initial screen protector install, there was separation and touch sensitivity issues. Heading to Best Buy to have them put on another screen protector.
Mike02z said:
The problem you will find with most glass protectors is they typically only have adhesive around the edges. This means there is a gap between the protector and the screen and this decreases sensitivity. I'd look for a new case that works with Dome Glass. Cases are a dime a dozen but glass protectors with full adhesive are very limited. I typically buy UAG cases but only the Monarch UAG works with the Dome Glass. There are 3 YouTube videos that go through compatible cases for Dome Glass.
Click to expand...
Click to collapse
What screen protector will work with the otterbox defender for the Note 8?
Anyone who can recommend a tempered glass that will work with UAG Plasma case? Have the Spigen Neo screen protector at the moment.
TIA!
jenellej said:
Anyone who can recommend a tempered glass that will work with UAG Plasma case? Have the Spigen Neo screen protector at the moment.
TIA!
Click to expand...
Click to collapse
Do got have pics of the case on your phone?
Will take a photo later.
jenellej said:
Anyone who can recommend a tempered glass that will work with UAG Plasma case? Have the Spigen Neo screen protector at the moment.
TIA!
Click to expand...
Click to collapse
Thx for opening this topic, i want to know that, too.
amFilm for example isn't working. Returned it.
I want to order this case but want to make sure it's works well with glass screen protector.
works for me with minimal modification, it takes less than 5 min for a perfect fit
https://forum.xda-developers.com/ve...cessories/uag-plasma-whitestone-dome-t3677575
gregory1824 said:
works for me with minimal modification, it takes less than 5 min for a perfect fit
https://forum.xda-developers.com/ve...cessories/uag-plasma-whitestone-dome-t3677575
Click to expand...
Click to collapse
That's what I didn't want to do
To bad that UAG isn't offering a matching glass themselves
Gesendet von meinem MI MIX mit Tapatalk
borijess said:
That's what I didn't want to do
Click to expand...
Click to collapse
understandable, just showing the option and what it would involve/look like... from what i've seen the other protectors aren't as good due to them not having the curved protector and screen. i drive for ups on a rural route and constantly have to deal with dust from dirt roads, this was just my best option if i wanted to use that uag case. happy hunting and if you find a good one followup and let me know about it
gregory1824 said:
understandable, just showing the option and what it would involve/look like... from what i've seen the other protectors aren't as good due to them not having the curved protector and screen. i drive for ups on a rural route and constantly have to deal with dust from dirt roads, this was just my best option if i wanted to use that uag case. happy hunting and if you find a good one followup and let me know about it
Click to expand...
Click to collapse
Understood. I love the UAG case but don't want to alter it to make it fit. Had the same issues with the Note 7. I am currently using the sup case. It works well with the zizo glass screen protector. It had similar to UAG protection.
Here are some pics of the Sup Case.
https://www.amazon.com/gp/aw/d/B074W6GCZH/ref=yo_ii_img?ie=UTF8&psc=1
The UAG Monarch fits the whitestone dome according to a video review on youtube. You must get the screen protector absolutely centered but it does appear to work in the video review. Same review shows that the uag plasma does not work.
What about the plyo series?
I'll be rocking both a Plasma and a Monarch depending on activity and I'm looking forward to finding a TGSP that works, too. I plan to use IQShield in the meantime.
Unfortunately the Spigen Neo film for the note 8 doesnt work with the UAG Plasma.. ended up trashing one of the films trying to make it fit.. the film was too thick and corners were too long to fit in the plasma..
The generic full coverage TG I ordered had the same issue.. I think its really the corners of the case that make it difficult to find screen protection for this case..
Here's the back
Yes, it seems like more protectors fit the Monarch but not the Plasma. I wonder if a case friendly IQ Shield would work fine. I have the Plasma already but am still waiting on both the screen protector and the phone.
gregory1824 said:
understandable, just showing the option and what it would involve/look like... from what i've seen the other protectors aren't as good due to them not having the curved protector and screen. i drive for ups on a rural route and constantly have to deal with dust from dirt roads, this was just my best option if i wanted to use that uag case. happy hunting and if you find a good one followup and let me know about it
Click to expand...
Click to collapse
I had a rural route awhile back when I was in package car at UPS so I understand your pain.
I've had 2 Zaags glass ones. There cap. Sensitivity is an issue as well as 2 have cracked. Phones been never dropped. I keep my phone separated with nothing else in my pockets
Sent from my SM-N950U1 using Tapatalk
Ended up getting this.. a bit skeptical but its better than nothing for now I guess.. Didnt want to change my UAG Plasma at the moment so I guess this should do for now to prevent hairline scratches i guess..