Related
Ok guys now i have bricked Galaxy Tab.
Main problem is my customer wanted to install custom rom without rooting device. So there is no recovery mode. I flashed with odin and Heimdall but stuck at Galaxy Tab screen.
i found a solution. There is a recovery section in Heimdall. if someone tell me or send me recovery file i can test it and i will tell the last situation. If it works we will find a solution. if not ...
PS: if u have other solutions please offer me . i didnt find a suitable solution.
Thanks for reading
We would need to know what kind of tab.
it is euro tab
Can you get back into download mode (yellow android digging)? Or sometimes a phone-pc! picture? Then you can just reflash.
i can enter download mode but after re-flash system cant start. bec there is no recovery.
flashing has no relation with root... you can flash firmware on a not rooted device WITHOUT any problem.
recovery is inside the firmware you flash....I think you got some confused ideas...
i am reflashing device it reboots and stucks at galaxy tab screen.
i checked 3 - 4 firmwares same error.
i check
adb devices
Result :
xxxxxxxxx RECOVERY
adb shell
Result :
- exec '/system/bin/sh' failed: No such file or directory (2) -
Any ideas ?
try this it might work
hold the power off button for 10 second
to make sure it really powered off
hold down all 3 button together
see if it power up in recovery mode
www.cepdukkani.net said:
i am reflashing device it reboots and stucks at galaxy tab screen.
i checked 3 - 4 firmwares same error.
i check
adb devices
Result :
xxxxxxxxx RECOVERY
adb shell
Result :
Any ideas ?
Click to expand...
Click to collapse
You don't flash with adb. Flash with odin3 or heimdal.
man i am flashing with odin it reboots and stucks in Galaxy tab screen.
3 button combo stucks "Power Reset or Unknown Upload Mode " screen
Finally ;
Reflash with odin and heimdall :
Result Stuck at Galaxy Tab Screen. Adb result Device in Recovery.
Attempt a full flash with firmware that has recovery? MoDaCo is a good one. Doesn't sound bricked to me, sounds like your rom is not compatible with the firmware.
Are you flashing a ext4 firmware?
I got this tab stuck at the galaxy screen when I attempted a recovery to a non ext4 backup. Sounds similar.
Sent from my GT-P1000 using XDA App
i cant flash ext4 bec it stucks at %100
i re-tried it it gots FAIL at %100
This is a gsm tab, correct?
Have you tried any other kernels or roms?
Which are you currently trying to flash? Did you unlock the bootloaders?
Sounds like a revert to stock and 2nd attempt are in order.
Sent from my GT-P1000 using XDA App
i tried to flash PDA section it gave me error. i flash with PHONE section (via odin) it resets but still same error.
it is gsm euro tab. i tried original 5 firmwares
i tried Roto, JM6, Modaco, Overcome still stuck at same state...
i still think main problem is No Recovery partition in device.
If you can get it into download mode, then there is still hope...
Unfortunately, I don't have the answer...
When mine was stuck at galaxy screen, and wouldn't even go into recovery, I flashed a new kernel and all was well.
I also never used Odin, always Heimdel.
Sent from my GT-P1000 using XDA App
as i read in modaco :
after kernel update enter recovery
but no recovery after kernel update any ideas
Likely because you haven't gotten a complete flash... At least that is how you make it sound.
Are you sure you have and are following the instructions correctly?
Unlocked bootloaders and proper use of odin are the two things I would check right off the bat...
Sent from my GT-P1000 using XDA App
i am not sure that if my bootloader is unlocked or not.
i flashed with odin that is fine what else ?
Last resort I have for u
If u are able to get in download mode
Go get roto jme V4 full version
Flash it with Odin
Please read instruction for installing roto jme v4 full version
***FLASH ONLY WITH ODIN***
FOR GSM TAB ONLY
I have a samsung galaxy note and accidentally a tried to install a samsung galaxy SII firmware and my device got bricked. and it does not boot in recovery mode or download mode. the screen is blank and the device will not boot into any mode.
I am looking for a solution to unbrick the device from my windows pc without buying anything.
is there any software to unbrick the samsung Galaxy Note?
betatest512 said:
I have a samsung galaxy note and accidentally a tried to install a samsung galaxy SII firmware and my device got bricked. and it does not boot in recovery mode or download mode. the screen is blank and the device will not boot into any mode.
I am looking for a solution to unbrick the device from my windows pc without buying anything.
is there any software to unbrick the samsung Galaxy Note?
Click to expand...
Click to collapse
Hm...no mate...sorry... I think this sort of is it for your device... Flashing S2 firmwares on the Note does have that effect.
You could try a JIG, although it's a longshot, but most certainly be ready to take it to Sammy's service center. Say something went wrong while updating through Kies, although they might figure it out.
If they do figure it out, you're probably looking at a new motherboard, in the area of 200$ from what other users in similar situations have reported.
Try jtag or riff box.. Works well for samsung skyrocket, captivate and the likes. Might work for the note as well..
It could be that it's just the screen that doesent work but you are actully in download mode.
this happend to me once with my Nexus S, i flashed wrong rom to phone.
try connecting phone to PC and open CMD and run "adb devices" and se if the computer recognize the phone even thow the screen is black.
like i said, i had this problem once when flashing I9020T rom on my I9023 Nexus S once.
the screen that doesent work but you are actully in download mode !!!!!!!!!
try it until you got there
where i find a rom to n7000
Multiple files with Pit included
GT-N7000 ?
nocus said:
where i find a rom to n7000
Multiple files with Pit included
Click to expand...
Click to collapse
www.sammobile.com
betatest512 said:
I have a samsung galaxy note and accidentally a tried to install a samsung galaxy SII firmware and my device got bricked. and it does not boot in recovery mode or download mode. the screen is blank and the device will not boot into any mode.
I am looking for a solution to unbrick the device from my windows pc without buying anything.
is there any software to unbrick the samsung Galaxy Note?
Click to expand...
Click to collapse
Why in the world would you do that anyway!?
Sent from my GT-N7000 using XDA
hmm
usually flashing different roms do brick the phone
and phone do not turn on. But atleast you can power up your device.
You can use jig to force your device to boot into download mode.
It may not work, but I heard few people got theirs work.
betatest512 said:
I have a samsung galaxy note and accidentally a tried to install a samsung galaxy SII firmware and my device got bricked. and it does not boot in recovery mode or download mode. the screen is blank and the device will not boot into any mode.
I am looking for a solution to unbrick the device from my windows pc without buying anything.
is there any software to unbrick the samsung Galaxy Note?
Click to expand...
Click to collapse
Please do this:
1. Replace battery
2. Insert batery
3. Hold down volume key + home key + power key for 15s to 20s
4. Press volume up key
5. Open Odin
6. connect your phone to pc
7. flash new bootloader(2.tar) by odin
Please see this link: http://forum.xda-developers.com/showthread.php?t=1354888
and download attachment file then extract it and choose 2.tar to flash.
After complete your phone can boot to download mod and you must flash original rom for galaxy note by download form www.sammobile.com
Good luck.
Hey guys. Ive had a note 3 before in the past and have used the Root DelaVega to root successfully. This was early in the year. I sold my old note 3 for an HTC One. Well today i traded my HTC One back for a note 3 as i missed the Note 3. As soon as i came home i attempted to use the Root DelaVega method to foot (just like i did before) and immediately it failed.
I have been stuck on a screen saying "firmware update encountered an issue - select recovery in Kies" so i tried Kies 3.2 however it says my device is not compatible. Come to find out after doing research (talking to the original owner i traded my HTC One for) the Note 3 i have is on the latest version of KitKat 4.4.2 that is not compatible with the Root DelaVega method or any root method - so i screwed that up. I can successfully boot in and out of download mode. Ive tried to flash N900XXUDNA6 4.4.2 in Odin several times, it begins then fails almost immediately and the bar on the phone itself (in download mode) begins then freezes shortly after beginning. Ive also tried to flash N900XXUDNC1 JellyBean thru odin and get the same results - almost immediately fail and the blue status bar on the phone freezes when it barley begins. What else can i do??? am i totally screwed? Ive been researching and trying to fix this for 6 straight hours now! My gf is about to kill me for being online so long Is there anything i can do at this point? Am i stuck
[UPDATE] .after looking around all day i have found i am able to successfully flash the n900a AP, CP, and PIT files, however the problems seems to be whenever i try to flash a Bootloader file. The update gives me the error on the phone "SW REV CHECK FAIL" FUSED 3 BINARY 2. My knox counter is still 0x0. By flashing the at&t AP, PIT, and CP files the phone now boot loops and no longer takes me to the screen requesting me to restore thru KIES. However all it does it bootloop. I try to boot into recovery and it will tell me at the top left of the screen "booting recovery" but then just turn off and go right back to the "samsung galaxy note 3 screen" Does anything have any idea here?????
jthornton71707 said:
Hey guys. Ive had a note 3 before in the past and have used the Root DelaVega to root successfully. This was early in the year. I sold my old note 3 for an HTC One. Well today i traded my HTC One back for a note 3 as i missed the Note 3. As soon as i came home i attempted to use the Root DelaVega method to foot (just like i did before) and immediately it failed.
I have been stuck on a screen saying "firmware update encountered an issue - select recovery in Kies" so i tried Kies 3.2 however it says my device is not compatible. Come to find out after doing research (talking to the original owner i traded my HTC One for) the Note 3 i have is on the latest version of KitKat 4.4.2 that is not compatible with the Root DelaVega method or any root method - so i screwed that up. I can successfully boot in and out of download mode. Ive tried to flash N900XXUDNA6 4.4.2 in Odin several times, it begins then fails almost immediately and the bar on the phone itself (in download mode) begins then freezes shortly after beginning. Ive also tried to flash N900XXUDNC1 JellyBean thru odin and get the same results - almost immediately fail and the blue status bar on the phone freezes when it barley begins. What else can i do??? am i totally screwed? Ive been researching and trying to fix this for 6 straight hours now! My gf is about to kill me for being online so long Is there anything i can do at this point? Am i stuck.
Click to expand...
Click to collapse
if you have a att note 3 you might be screwed both the firmwares you list are not for our phone your best bet would be to go to a best buy or att service center and seee if they can reflash your phone
Is there a tar for the AT&T firmware? I've searched but this was all I could find.
jthornton71707 said:
Is there a tar for the AT&T firmware? I've searched but this was all I could find.
Click to expand...
Click to collapse
Yeah, it seems that the N900XXUDNA6 is not for the US Variant
"N900XXUDNA6 Android 4.4.2 KitKat official firmware update for Galaxy Note 3 SM-N900 is now rolled out by Samsung. This is the first KitKat official firmware for Galaxy Note 3 SM-N900. The firmware update rolled out in various countries including Sri Lanka, Nepal, Indonesia, Singapore, Vietnam, Kazakhstan, Ukraine, Russia, Thailand and India"
The DNA6 would be for the SM-N900 Exynos CPU devices, not the SM-N900A Snapdragon. That is probably your problem (In addition to trying to roll back to JB from KK)
Unfortunately, I dont know of any stock KitKat firmware. There is MI9 on Samfirmware's site, but that is JB not KitKat
jthornton71707 said:
Is there a tar for the AT&T firmware? I've searched but this was all I could find.
Click to expand...
Click to collapse
sorry.
B_I_N_G_E said:
sorry.
Click to expand...
Click to collapse
So after looking around all day i have found i am able to successfully flash the n900a AP, CP, and PIT files, however the problems seems to be whenever i try to flash a Bootloader file. The update gives me the error on the phone "SW REV CHECK FAIL" FUSED 3 BINARY 2. My knox counter is still 0x0. By flashing the at&t AP, PIT, and CP files the phone now boot loops and no longer takes me to the screen requesting me to restore thru KIES. However all it does it bootloop. I try to boot into recovery and it will tell me at the top left of the screen "booting recovery" but then just turn off and go right back to the "samsung galaxy note 3 screen" Does anything have any idea here?????
jthornton71707 said:
So after looking around all day i have found i am able to successfully flash the n900a AP, CP, and PIT files, however the problems seems to be whenever i try to flash a Bootloader file. The update gives me the error on the phone "SW REV CHECK FAIL" FUSED 3 BINARY 2. My knox counter is still 0x0. By flashing the at&t AP, PIT, and CP files the phone now boot loops and no longer takes me to the screen requesting me to restore thru KIES. However all it does it bootloop. I try to boot into recovery and it will tell me at the top left of the screen "booting recovery" but then just turn off and go right back to the "samsung galaxy note 3 screen" Does anything have any idea here?????
Click to expand...
Click to collapse
You could try to stop the boot, go back into Recovery and wipe cache, and wipe all data. I had an experience with my last device (SGSIII) that would boot loop sometimes when flashing back to a stock ROM.
Other than that, I dont have any other ideas
Just Googled the "SW REV CHECK FAIL" FUSED 3 BINARY 2", from what I found the Fused 3 means you were on Kit Kat, and Binary 2 basically means you are trying to downgrade to JB
It wont let me even boot into recovery. I hold the buttons and it boots back up saying "booting into recovery" like it is, then it just boot loops again.
jthornton71707 said:
It wont let me even boot into recovery. I hold the buttons and it boots back up saying "booting into recovery" like it is, then it just boot loops again.
Click to expand...
Click to collapse
The only other things I saw on that, suggested to users(on a different Samsung device) to use a jig to get it back into recovery. I am not familiar enough with the N3 yet to know if a jig will work on our devices. My guess is you messed up the bootloaders
Edit** I think that since things are so locked down that your best bet might be to try what jerrycoffman45 suggested a few posts ago
jerrycoffman45 said:
if you have a att note 3 you might be screwed both the firmwares you list are not for our phone your best bet would be to go to a best buy or att service center and seee if they can reflash your phone
Click to expand...
Click to collapse
My local at&t and best buy aren't very helpful for anything at all. ill keep googling ive been at this for 2 days now
There is no firmware to download for 4.4.2 yet so you are stuck till there is or do what I suggested you could also do a warranty exchange by calling att and you can't just go to any att store it has to be a service center
Sent from my SAMSUNG-SM-N900A using Tapatalk
---------- Post added at 05:40 PM ---------- Previous post was at 05:25 PM ----------
This might get you running
http://forum.xda-developers.com/showthread.php?t=2703006
Sent from my SAMSUNG-SM-N900A using Tapatalk
jthornton71707 said:
Hey guys. Ive had a note 3 before in the past and have used the Root DelaVega to root successfully. This was early in the year. I sold my old note 3 for an HTC One. Well today i traded my HTC One back for a note 3 as i missed the Note 3. As soon as i came home i attempted to use the Root DelaVega method to foot (just like i did before) and immediately it failed.
I have been stuck on a screen saying "firmware update encountered an issue - select recovery in Kies" so i tried Kies 3.2 however it says my device is not compatible. Come to find out after doing research (talking to the original owner i traded my HTC One for) the Note 3 i have is on the latest version of KitKat 4.4.2 that is not compatible with the Root DelaVega method or any root method - so i screwed that up. I can successfully boot in and out of download mode. Ive tried to flash N900XXUDNA6 4.4.2 in Odin several times, it begins then fails almost immediately and the bar on the phone itself (in download mode) begins then freezes shortly after beginning. Ive also tried to flash N900XXUDNC1 JellyBean thru odin and get the same results - almost immediately fail and the blue status bar on the phone freezes when it barley begins. What else can i do??? am i totally screwed? Ive been researching and trying to fix this for 6 straight hours now! My gf is about to kill me for being online so long Is there anything i can do at this point? Am i stuck
[UPDATE] .after looking around all day i have found i am able to successfully flash the n900a AP, CP, and PIT files, however the problems seems to be whenever i try to flash a Bootloader file. The update gives me the error on the phone "SW REV CHECK FAIL" FUSED 3 BINARY 2. My knox counter is still 0x0. By flashing the at&t AP, PIT, and CP files the phone now boot loops and no longer takes me to the screen requesting me to restore thru KIES. However all it does it bootloop. I try to boot into recovery and it will tell me at the top left of the screen "booting recovery" but then just turn off and go right back to the "samsung galaxy note 3 screen" Does anything have any idea here?????
Click to expand...
Click to collapse
Still need help?
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
only fix I know
as far as I have searched, the only current fix to get to use your phone is
GUIDE/ROM[4/1][AT&T][NC2_Bootloader][ N900AUCECMGL KITKAT][Stuck Download-Mode FIX]
Hi,
My phone -Note 4 N910T- is stucked at bootscreen, and it can not to boot into recovery mode too. It is bootloop after upgrading by OTA from Kitkat 4.4.4 - N910TUVU1ANK4.
I tried to flash stock firmware( using both "N910TUVU1ANK4" and "N910TUVU1COD6" ), or full files stock firmware ( included PIT files),but it hasn't worked. I also tried to flash by Smatch Swich, everything seem OK but it can not fix.
I attached some photos of my problem for your reference.
Please help me.
Thanks,
You didn't mention if you tried using Kies?
DigitalChris602 said:
You didn't mention if you tried using Kies?
Click to expand...
Click to collapse
I tried using Kies too, but it did not work.:crying::crying::crying:
I was going to suggest the same thing. Try using Kies and go to Tools\Emergency firmware recovery and see if that works.
Can you get into download mode?
Karakoram2 said:
Can you get into download mode?
Click to expand...
Click to collapse
Yes, I can. One of my attached photos has shown as above. I tried to flash via ODIN or Smart Switch ( Kies 3), the program has shown OK but I still got the problem.
saclyvn said:
Yes, I can. One of my attached photos has shown as above. I tried to flash via ODIN or Smart Switch ( Kies 3), the program has shown OK but I still got the problem.
Click to expand...
Click to collapse
It is pretty hard to brick these phones. Just in case you have a bad file or something. Grab the zip and follow these instructions. I know that all these files in this zip are good so it is worth a shot.
Even if you know what you are doing, follow the instructions exactly, you may be overlooking something. It happens to everyone sometimes.
http://forum.xda-developers.com/showpost.php?p=56226823&postcount=2
After you odin whichever firmware you flashed, wait about 10 min or so on that boot screen that is stucked. Then pull the battery out. Go into stock recovery but power+home+vol up. Then select wipe data/reset. Reboot and it should boot just fine.
At least that's how i fixed my phone that stuck few times like what you going through.
mutantblack said:
After you odin whichever firmware you flashed, wait about 10 min or so on that boot screen that is stucked. Then pull the battery out. Go into stock recovery but power+home+vol up. Then select wipe data/reset. Reboot and it should boot just fine.
At least that's how i fixed my phone that stuck few times like what you going through.
Click to expand...
Click to collapse
The problem is my phone can not access to stock recovery or TWRP recovery. It just stuck at first bootscreen which is shown "Samsung Galaxy Note 4 powered by Android", then restart and stuck again. So that I can not wipe data or reset to fix.
saclyvn said:
The problem is my phone can not access to stock recovery or TWRP recovery. It just stuck at first bootscreen which is shown "Samsung Galaxy Note 4 powered by Android", then restart and stuck again. So that I can not wipe data or reset to fix.
Click to expand...
Click to collapse
Since you can still get into download mode, what happens if you flash TWRP through ODIN? Step 10 in the instructions I posted assuming it is still rooted or start at step 8 if not. Just to see if you can get recovery working again.
You are wasting time...start over, it's your best and quickest fix....
http://forum.xda-developers.com/not...sy-steps-stock-odin-n910tuvu1anih-cf-t2903733
So I recently tried rooting my phone ( Samsung Galaxy Note 5 SM-N9208 ) using custom firmware through Odin but when it had finished installing on to my phone it was just froze on the boot screen (saying "SAMSUNG Galaxy Note5 ... POWERED BY android"). I tried all kinds of ways like try and turn it off and on using the reset method (Volume down + Power key) but that didn't work.
I even tried to put it in Recovery mode but it just just puts me on the same boot up screen (saying "SAMSUNG Galaxy Note5 ... POWERED BY android"). The phone can be put on downloading mode but I tried to install the stock (orginal) firmware for my phones model (SM-N9208 ( duos ) ) but in Odin it just says "Fail". My Phone is still stuck on the boot screen and I don't know how to fix it and I think that if I take to to a repair shop they might say that trying to root your phone damages warrenty and not try to fix it. PLEASE HELP !! :crying:
Hey mate.
This happened to me.
1st I downloaded the stock firmware zip for my country there is a thread in general for all firmwares.
2nd unzip and flash AP file in AP section of Odin.
Wait for it on flash then you'll be good to go.
Sent from my SM-N9208 using Tapatalk
Which country firmware did you use?
Which country firmware did you use?
It worked ! Thanks
I actaully did finally use this method but I had to use Taiwan firmware as there is not English one but I don't think that matters, thanks :good: