Related
I was trying to downgrade and something went wrong.
Now i'm stuck in Huawei LOGO and can't turn off phone, he keeps turning on and freeze at Huawei Logo.
He's getting really hot.
Tried a few tools to get him at adb but no luck...
Also tried update from dload sdcard but combo keys not working either...
Any ideas?
Delete
Enviado do meu iPhone usando o Tapatalk
migueli2 said:
I was trying to downgrade and something went wrong.
Now i'm stuck in Huawei LOGO and can't turn off phone, he keeps turning on and freeze at Huawei Logo.
He's getting really hot.
Tried a few tools to get him at adb but no luck...
Also tried update from dload sdcard but combo keys not working either...
Any ideas?
Click to expand...
Click to collapse
Same problem but on EVA-AL00 running AL19C636B190
Have u tried to unlock bootloader or flash boot/recovery with fastboot mode?
I have the same problem, any ideas?
I had the same issue, three only thing that worked for me was to get the phone into recovery, vol down and power and flash through DC phoenix
My P9 make "self reset" all time, until battery gets empty. I can't get into recovery
Open hisuite enter recovery area plug phone to pc you see vol down + power screen. Press vol- and power button you must go to fastboot screen. If phone recover by hisuite thats ok.
If not, you need unlocking bootloader with srk tool ( must have unlock code ) flash twrp with command fastboot flash recovery twrp.img or use srk tool to flash twrp recovery.
Enter recovery upload files to sd card, flash L09C432B322 zip than hw_eu zip. Your phone must boot with nougat. (Of course your phone dont C432, you must use your phone B322 files)
If you dont use nougat do a rollback prosedure.
master' said:
Open hisuite enter recovery area plug phone to pc you see vol down + power screen. Press vol- and power button you must go to fastboot screen. If phone recover by hisuite thats ok.
If not, you need unlocking bootloader with srk tool ( must have unlock code ) flash twrp with command fastboot flash recovery twrp.img or use srk tool to flash twrp recovery.
Enter recovery upload files to sd card, flash L09C432B322 zip than hw_eu zip. Your phone must boot with nougat. (Of course your phone dont C432, you must use your phone B322 files)
If you dont use nougat do a rollback prosedure.
Click to expand...
Click to collapse
I have same problem ,but my is Eva 19l,not support hisuite,and I can't turn on the phone check product ID can't unlock bd ...... anything can help me?
Happy baby said:
I have same problem ,but my is Eva 19l,not support hisuite,and I can't turn on the phone check product ID can't unlock bd ...... anything can help me?
Click to expand...
Click to collapse
Use dc phoneix for unlock bootloader . (I dont use so i dont know how to use)
Did anyone ever find an working solution for this, my problem is almost identical to the OP's but mine gets stuck on the bootloader unlocked warning screen, says the phone is rebooting but never does. I'm unable to turn the phone off without it instantly restarting and hanging on the bootloader warning screen, phone also gets super warm when on this screen. HELP
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
kyle_2103 said:
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
Click to expand...
Click to collapse
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
ChaseRxx said:
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
Click to expand...
Click to collapse
I think there is not solution for this problem. We have to wait. (I have the same problem but in Al00 running Al19 rom)
How do you check for FRP lock on a Huawei phone just curious.
ChaseRxx said:
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
Click to expand...
Click to collapse
Okay to unlock the bootloader, go into fastboot and plug in the USB to your computer, then by either using SRK tool or adb you need to flash this command: fastboot oem unlock (insert bootloader code) *don't put brackets* if you are unaware of your bootloader code then I cannot help you, however if you do know it, then once you unlocked the bootloader flash system.img and stuff to see if that works for you
kyle_2103 said:
Okay to unlock the bootloader, go into fastboot and plug in the USB to your computer, then by either using SRK tool or adb you need to flash this command: fastboot oem unlock (insert bootloader code) *don't put brackets* if you are unaware of your bootloader code then I cannot help you, however if you do know it, then once you unlocked the bootloader flash system.img and stuff to see if that works for you
Click to expand...
Click to collapse
Already tried this, I have the unlocking password but can't unlock BL through fastboot oem unlock (code) because the OEM Unlock is disabled.
ChaseRxx said:
Already tried this, I have the unlocking password but can't unlock BL through fastboot oem unlock (code) because the OEM Unlock is disabled.
Click to expand...
Click to collapse
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
kyle_2103 said:
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
Click to expand...
Click to collapse
I've tried some command in fastboot mode but there's always an error: Remote: command not allowed.
I can't do anything with fastboot mode
1. Try to force update with Power Button + Min Vol Button + Max Vol Button, liked you said this isn't working try to do the button combination with the phone connect it to the PC; in my case some times dload din't works after I connected the phone to the computer.
2. Other thing, something happend if you turn of the phone and leave Max Vol Button pressed, you should be entering to eRecovery.
3. Remember that sometimes enter in eRecovery mode requires to the phone be turn off otherwise you can't access to Recovery. So if this is the case follow bullet #2 and them #1.
PD: OFC I'm assuming you already have the dload folder with an compatible version of stock ROM on your SDCARD. If you don't have any version tries this one: https://forum.xda-developers.com/p9...dload-file-p9-eva-l09-b136-t3382818?nocache=1
Hope I helped you, I already bricked twice my P9 corrupting System Table Partitions.
Jeremy Molina.
---------- Post added at 10:38 AM ---------- Previous post was at 10:36 AM ----------
kyle_2103 said:
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
Click to expand...
Click to collapse
If you did the change of Unlock OEM before the bricked in an previous authorized computer you will still have rights for, otherwise new Android Security features is going to rejected the request.
Exacly
Dload/ no network
ChaseRxx said:
Exacly
Click to expand...
Click to collapse
Hi guys! Im new sorry if posted in wrong place/topic, I did dload method as here https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818 to debrand my L09 Vodafone to stock software and now I end up in EVA-C900B136 and my sim card/network is not working anymmore I had download the software package is in the above post and did force flash.
Many thanks for help!!!
kyle_2103 said:
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
Click to expand...
Click to collapse
How did you unlock the bootloader through adb ? I'm in the same position as you put I have a P9lite.
dondrog said:
How did you unlock the bootloader through adb ? I'm in the same position as you put I have a P9lite.
Click to expand...
Click to collapse
fastboot oem unlock (followed by bootloader code)
kyle_2103 said:
fastboot oem unlock (followed by bootloader code)
Click to expand...
Click to collapse
Hello gays i install nougat 7
install with TWRP after install my phone is no keybord no all problems and i can`t active oem waht i do all command
remote not allowed coomand and i try to install all veriosn but still problem please help me
i install
EVA-L19C432B322-update
and my phone 6369C-EVA L19
my mistake please help me
i try to swoftware sim but swoftware failed
--
incompatibility with current version please download the correct update package
i upload vedio on youtube see please https://www.youtube.com/watch?v=V2yH...ature=youtu.be
sry for my bad engilsh
Any help would be greatly appreciated
I have a P9 L09, i have unlocked the bootloader, flashed TWRP recovery, and started flashing some roms. I have succesfully flashed a cyanogenmod, and it booted properly, but when it started it asked me for a password which i did not know, so i google searched and found out that it is a common issue and i need to wipe data from recovery. I tryed that but it did not work it says failed, and nothing works in the wipe advanced section, beside system. And also in the custom recovery it says that the internal storage has 0MB ! I was able to put other custom roms on the SDcard and flash them, they booted but every single one asks for the password.. I then tryed to install stock rom with the dload method, but it crashes and 40% , and i tryied the System Recovery option in HiSuite and it says it is not compatible with my device. Any help would be greatly appreciated! Thank you!
kyle_2103 said:
fastboot oem unlock (followed by bootloader code)
Click to expand...
Click to collapse
Hello. I have the same problem. I have my unlock code but in fastboot, adb command says it failed. Sorry for bad english. What can i do?
FAILED: REMOTE COMMAND NOT ALLOWED FINISHED.
Same problem on my honor &x locked bootloader and bricked. unlocking the oem like you said above does not work
Hello guys!
I have bricked my P9 EVA-L09 today. i want to update it to android 7 with update from erecovery. i put files from update_data_full_hw_eu.zip and it went good but phone wont boot up and the second file "update.zip" ive extracted to dload but phone cant install it. I've tried many things to unbrick my phone but i cant do it. flashing system via fastboot is impossible cause it says that it cant be written. i have no root ant no bootloader unlocked. Please help me guys QQ
If you have C432, try this:
1. install via sdcard + 3buttons UPDATE.app from HUAWEI_P9_Rollback Package_EVA-L19_from Android 7.0_EMUI 5.0_to Android 6.0_EMUI 4.1_C900B300
2. install via sdcard + 3 buttons HUAWEI_P9_Firmware_EVA-L09_Android 6.0_EMUI 4.1.1_C432B182_Western Europe
marjaN_ said:
If you have C432, try this:
1. install via sdcard + 3buttons UPDATE.app from HUAWEI_P9_Rollback Package_EVA-L19_from Android 7.0_EMUI 5.0_to Android 6.0_EMUI 4.1_C900B300
2. install via sdcard + 3 buttons HUAWEI_P9_Firmware_EVA-L09_Android 6.0_EMUI 4.1.1_C432B182_Western Europe
Click to expand...
Click to collapse
that's the question, because i dont remember my previous working build but ill try this two packages anyway, thanks a lot for your reply
edit: now i cant even go to recovery after flashing rollback :/
edit2: i know why, you posted rollback for eva-L19 and i just copied it and flashed but phone have installed it correctly and i cant go to recovery :'(
Nobody can help me? :crying::crying::crying:
power off, then press the Power + voulume +, wipe data+cache
ziemiak said:
that's the question, because i dont remember my previous working build but ill try this two packages anyway, thanks a lot for your reply
edit: now i cant even go to recovery after flashing rollback :/
edit2: i know why, you posted rollback for eva-L19 and i just copied it and flashed but phone have installed it correctly and i cant go to recovery :'(
Click to expand...
Click to collapse
try installing 6.0 firmware for you model.
i cant go to eRecovery, i cant even shut down device - only full discharge can make it.But i can go to fastboot. Ive tried with fastboot commands but i have locked bootloader and every time my flashes are rejected by phone. The simpliest metod - HiSuite send me message: "no recovery packages are found for your phone model". It should be a way to unbrick it with fastboot but i dont know how.
Hi I was in your shoes yesterday I had to pay for the dn Phoenix to fix my phone it uses a backdoor to install firmware from fastboot
You could try and look for the backdoor commands I found this , I would post a link but can't yet
fastboot oem backdoor info
FB LockState: LOCKED
USER LockState: LOCKED
fastboot oem backdoor get
FBLOCK**obfuscated**
fastboot oem backdoor end
remote: fastboot stat not match
fastboot oem get-bootinfo
locked
fastboot oem check-rootinfo
old_stat: SAFE
now_stat: SAFE
change_time: 0000000000
fastboot oem check-image
secure image verify success
fastboot oem relock
remote: stat not match
fastboot oem backdoor set
remote: data parse fail
fastboot oem frp-erase
Haven't tried, but should remove the Factory Reset Protection (FRP)
fastboot oem emmc_diag
cid info:
mid 17,oid 256,pnm 064G70,prv 0.0,psn 0x18b66278,
csd dump:
D02700320F5903FFFFFFFFEF864000AB00
ext_csd dump:
...
FMW FAIL! WRITE PROTECT!
fastboot oem emmc-dump
unknown status code
fastboot oem get_key_version
huawei_key_v1
fastboot oem battery_present_check
3984mv
fastboot oem get_hwnff_ver
Ver2.3
fastboot oem get-psid
SN:**YourIMEI**
fastboot oem get-build-number
V100R001C00B000
fastboot oem get-product-model
HUAWEI M2-A01W
I will try to send my Huawei to warranty service and if they wont repair my phone ill pay for DC Phoenix too
I had the same problem!
Hi there.
Was in the same situation as you not so long ago.
Get a micro SD card, plug into PC, create a dload folder then download the rollback file from the Huawei website.
I'm a new user so can't post URL. Just Google "Huawei P9 rollback" should be the 2nd option (consumer.huawei link)
Put in the dload folder and put into your P9.
Press and hold power, vol up and down together till the Huawei logo appears and let go when you feel the vibrate.
This should force update and restart. (does not rollback to email 4.1, only unlocks the rollback from emui 5)
Next you need to download your previous firmware, in my case I'm in the UK with unlocked P9, so I downloaded EVA-L09C432B166.
Same again, put micro SD into PC, delete the rollback file and put your firmware in its place.
Put back in the P9 and repeat the above force update.
This will put you back to working stable stock.
For further reassurance, download a build previous to B166 so when it's up and running you can search for an OTA update to make sure all is in order.
Hope this helps.
Did you meant that the rollback flashes without going to eRecovery? I said some posts earlier that i cannot enter eRecovery so i cant dload anything. Im stuck on Huawei logo all the time do you think than i can flash something via dload without going to eRecovery?
erecovery is different.
I'm saying to do a force update, but in order to do so you need a microSD card.
Erecovery involves holding power up while connecting to PC in order to use HiSuite etc to recover.
Force updater tells the phone to search for dload folder on SD card or phone and install the update before trying to boot up OS.
So, if you connect microSD to your PC via a card reader etc and not via your phone, you can create a dload folder, download the rollback file from Huawei (above) the file is only around 80mb or so, plug the SD card back into your phone while powered off, hold down Power + vol up + vol down. The Huawei logo will appear, when it disappears let go of all the buttons. This should bring up the Update screen.
At this point the phone will install the rollback file. and this will bypass the rollback prevention in emui 5 and therefore allow you to install a previous emui build (4.1)
Again though your phone will still not boot at this point as there is no OS working or installed.
So you need to download the corresponding firmware for your phone/country/operator. Once downloaded, remove the memory card from the phone, connect to PC via card reader, delete the rollback file you placed in the dload folder and replace it with the downloaded OS and repeat the process used to install the rollback.
From there you should be back to stock marshmallow.
I should point out the files you download may be in zip folders. You need to extract the "update" file and that's what you place in the dload folder.
Hope this all makes sense, if not I can make a YouTube video and post it.
Good luck.
Now i know what did you mean, but sadly i cant update it too. I tried with my friend's P9 and when i hold these 3 buttons then shows special update screen and in my P9 it doesnt probably because of my bad flash rollback for P9 EVA-L19 and i have EVA-L09 model
http://www.android-hilfe.de/thema/downgrade-von-b360-zurueck-auf-b182.813366/
You must first make a step.
Only http://download-c.huawei.com/download/downloadCenter?downloadId=92743&version=363740&siteCode=de
Then
http://download-c.huawei.com/download/downloadCenter?downloadId=91783&version=358257&siteCode=de
're After You on MM and then can do what you want.
In the first link is a guide.
I did the same thing is what you doing today I've tried this and it fixed my phone
ziemiak said:
Now i know what did you mean, but sadly i cant update it too. I tried with my friend's P9 and when i hold these 3 buttons then shows special update screen and in my P9 it doesnt probably because of my bad flash rollback for P9 EVA-L19 and i have EVA-L09 model
Click to expand...
Click to collapse
The rollback package for L09 model is here: http://download-c.huawei.com/download/downloadCenter?downloadId=91892&version=363759&siteCode=es
Inform the results please.
I made a video to better understand. This wideo is showing that phone isn't searching any dload folder. https://youtu.be/oD9AI_6SqLs
edit: i have tried your advices to put rollback and try to dload it and then same with firmware but there is no reaction i didnt see there any circle with progress of flashing (like it was before i flashed rollback for L19)
Mine is now doing the exact same thing - I too tried the dload method to update from C432B182 to C432B361 and it's screwed my device up too.
Until I tried to use the 'rollback' package, it would at least allow me to power off, so I could get back into the Update screen - after doing that, and trying the B182 again, it's got into this position where I can do literally nothing with it. No combination of buttons, no matter how long I try to hold them, seems to do anything.
An update...
After letting my battery drain completely, I have been able to get into Fastboot mode, by pressing and holding the Volume Down button whilst connecting a USB cable to my PC.
From here, I have been able to run DC-Phoenix, and have been able to write some .APP files to it - which has at the very least got it booting into eRecovery, rather than the boot loop it had before, but is still not fully booting.
It looks like I might need the full, original firmware, in order to proceed?
And I've got about 68 hours left to flash using DC-Phoenix, or I'll have to spend another €15!
Yes you download the original firmware unzip it and put it in the "dload" folder of SD card then do a force update. Hold all the buttons vol + vol - and power
Hello, this is not the first time I'm rooting an Android phone, and I had no problems with any of my past attempts. However, this situation with Huawei P9 EVA-L09 has given me a headache...
I have originally followed this guide:
https://theunlockr.com/2016/12/06/root-huawei-p9-p9-plus/
(which appears to have skipped tiny but crucial part on flashing twrp - so I don't recommend)
Everything was going fine until I have flashed TWRP on my still NOT-rooted Huawei P9 EVA-L09 (adb reboot bootloader ; fastboot flash twrp-3.1.0-0-eva.img) successfully:
target reported max download size of 471859200 bytes
sending 'recovery' (22462 KB)...
OKAY [ 0.639s]
writing 'recovery'...
OKAY [ 0.302s]
finished. total time: 0.944s
After this I have used the command fastboot reboot and phone started normally. However when I try booting into custom TWRP recovery I just flashed and get the usual bootloader unlocked warning! I either get stuck at Phone is booting now... or I get into original EMUI Huawei eRecovery.
Did I do something wrong? What do I do after flashing TWRP?
I have read somewhere that original EMUI ROM maybe rewrites custom recovery if OS(ROM) boots before you entered recovery so could this be my problem? How do I reboot directly into TWRP from fastboot to avoid booting into the ROM?
Also, what is the correct way to boot into TWRP, what key combo? Since I get phone bootloader unlocked warning! right after powering on the phone, do I press the combination right away or after the warning shows up? I've been trying to boot custom recovery for hours, this is just silly...
Put simply I can't seem to get into TWRP I just flashed so I can install SuperSU from SD card to root my phone...
I have tried older TWRP version too, didn't help.
Phone is Huawei P9 EVA-L09, Android 7.0 EMUI 5.0, tried both TWRP versions from here: https://dl.twrp.me/eva/
After flashing twrp you should special reboot to twrp. Adb command reboot with pushing vol + and at the same time disconect usb cable. Check this on twrp official
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
darrr1 said:
After flashing twrp you should special reboot to twrp. Adb command reboot with pushing vol + and at the same time disconect usb cable. Check this on twrp official
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
Click to expand...
Click to collapse
How will I do anything with adb if I'm in fastboot mode? Only fastboot commands work...
Maybe you thought fastboot reboot and key combos, but which combos are correct? The TWRP official page says I should Google for key combo (how come they don't know lol, I guess they had to test the bloody thing?) and I have googled but some people say it's power down, some up, some both, what the f? When I think I got it right I get stuck on Device is booting now...
I've just tried this:
Flash TWRP 3.1.0-0-eva again over ADB
fastboot reboot + VolUp held and USB cabble plugged out
Stuck forever at Device is booting now... (below the Unlocked bootloader warning).
Ofcourse fastboot.
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
Solved this part by using this TWRP version:
https://forum.xda-developers.com/p9/development/twrp-t3565703
The button combination to enter TWRP on P9 EVA-L09 EMUI 5.0 is - Power and Vol+ buttons held while fastboot reboot command is issued in CMD and USB cable unplugged, all at the same time. After device vibrates you should release only the power button. When you see 'Device is booting...' you can release Vol+ too. TWRP should now boot.
Now on to root...
Solution:
https://forum.xda-developers.com/p9/how-to/twrp-3-0-2-0-n-t3506947/post70927601#post70927601
After flashing EMUI 5.0 EVA-L09C432B378 and update B378_update_data_full_hw_eu and wiping my phone (wipe data/factory reset - yes this was probably stupid without backup or anything), it boots fine but there is no keyboard app, only useless voice control. This wouldn't be a problem if I could get past EMUI welcome screen and install keyboard.apk manually but it won't allow me to use the phone until I log into Google account which I used on the phone before factory reset. It doesn't allow me to access SD card or anything either, doesn't even ask for permission when plugged in. Flash process also rewrote TWRP recovery so I only have eRecovery atm (bootloader is still unlocked but this is useless at this point). I also cannot enable Dev options/USB debugging or reach phone settings (all reset to default obviously) at all because I can't get past EMUI welcome wizard without a keyboard... I can use dialer keypad in emergency call mode before starting the welcome wizard, for example I just checked my IMEI, but most other commands don't work.
Any ideas? I read that there is a rollback version which will enable me to flash the previous EMUI/Android6.0 version, but which rollback is right for my device European EVA-L09C432B378 phone? I don't want to get into more trouble by flashing a wrong file...
Vernicht said:
Solved this part by using this TWRP version:
https://forum.xda-developers.com/p9/development/twrp-t3565703
The button combination to enter TWRP on P9 EVA-L09 EMUI 5.0 is - Power and Vol+ buttons held while fastboot reboot command is issued in CMD and USB cable unplugged, all at the same time. After device vibrates you should release only the power button. When you see 'Device is booting...' you can release Vol+ too. TWRP should now boot.
Now on to root...
Solution:
https://forum.xda-developers.com/p9/how-to/twrp-3-0-2-0-n-t3506947/post70927601#post70927601
Click to expand...
Click to collapse
twrp3.1.1-1 with openKirin boots into Recovery fine
I got stuck at the same problem but some how luckily I could access TWRP
My phone is on Emu 5.0.1
Flash TWRP as indicated on manuals
without rebootin lock again your bootloader with fastboot oem relock XXXXXXXXXXX (the pin you used to unlock)
reboot your phone, Huawei erecovery might say something about format data partition, ignore, just shutdown your phone
reboot on bootloader using volumedown + power
Unlock your phone again with fastboot oemunlock XXXXXXXXXXX
shutdown your phone
Reboot in recovery using volume up + power.. TWIRP Appears!!
during all process phone was connected to computer. Hope it helps someone
Thank you gonsol !!!
Huawei P9 Lite Stuck Up on Huawei LOGO
Someone can help or can give me a step by step turorial on how to fix Huawei P9 Lite Stuck up on Huawei LOGO.
Everytime I try to power off my phone it always reboot twice and I try a method "dload'/"UPDATE.APP" but it won't work for me anymore co'z my phone wont turn off even I try to empty it's battery and try to charge it but its always the same ..
Any help will appreciated Thank You and Godbless newbie here
gonsol said:
I got stuck at the same problem but some how luckily I could access TWRP
My phone is on Emu 5.0.1
Flash TWRP as indicated on manuals
without rebootin lock again your bootloader with fastboot oem relock XXXXXXXXXXX (the pin you used to unlock)
reboot your phone, Huawei erecovery might say something about format data partition, ignore, just shutdown your phone
reboot on bootloader using volumedown + power
Unlock your phone again with fastboot oemunlock XXXXXXXXXXX
shutdown your phone
Reboot in recovery using volume up + power.. TWIRP Appears!!
during all process phone was connected to computer. Hope it helps someone
Click to expand...
Click to collapse
Hello, my phone is stuck now on the "Your device is booting now" state, can you help? I did exactly what you said above
sorry I tried to write it as detailed as possible when it happened.. only thing i recall is that I read that sometimes you have to try several times,
Maybe you thought fastboot reboot and key combos, but which combos are correct? The TWRP official page says I should Google for key combo (how come they don't know lol, I guess they had to test the bloody thing?) and I have googled but some people say it's power down, some up, some both, what the f? When I think I got it right I get stuck on Device is booting now...
I've just tried this:
Flash TWRP 3.1.0-0-eva again over ADB
fastboot reboot + VolUp held and USB cabble plugged out
Stuck forever at Device is booting now... (below the Unlocked bootloader warning).[/QUOTE]
I have the same matter here with my Huawei Nova 2i. I have flashed sucessfully TWRP but cannot enter TWRP mode to install root. When I hold Power + Vol+, it stucks on "Device is booting now..." forever. And for normal power up, it show the EMUI recovery. I've tried so many way but useless. [TWRP][P9][3.1.1-1][EMUI 5.x/AOSP N][DECRYPTION SUPPORT] by OldDroid did't help. Is there any version of TWRP can help my Huawei Nova 2i???
gonsol said:
I got stuck at the same problem but some how luckily I could access TWRP
My phone is on Emu 5.0.1
Flash TWRP as indicated on manuals
without rebootin lock again your bootloader with fastboot oem relock XXXXXXXXXXX (the pin you used to unlock)
reboot your phone, Huawei erecovery might say something about format data partition, ignore, just shutdown your phone
reboot on bootloader using volumedown + power
Unlock your phone again with fastboot oemunlock XXXXXXXXXXX
shutdown your phone
Reboot in recovery using volume up + power.. TWIRP Appears!!
during all process phone was connected to computer. Hope it helps someone
Click to expand...
Click to collapse
Hello
Thank you all for the help
I think I did something really bad... I have rooted phone and TWRP installed on a P9, but no ROM. I was trying to enter TWRP recovery and I did "fastboot oem relock XXXXXXXXXXX".
Now I see only the white screen with little andoid robot saying:
Attention!
Please update system again
...
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
Am I screwed ? :0
Thank you so much in advance
lexoyo said:
Hello
Thank you all for the help
I think I did something really bad... I have rooted phone and TWRP installed on a P9, but no ROM. I was trying to enter TWRP recovery and I did "fastboot oem relock XXXXXXXXXXX".
Now I see only the white screen with little andoid robot saying:
Attention!
Please update system again
...
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
Am I screwed ? :0
Thank you so much in advance
Click to expand...
Click to collapse
Don't understand why you thought that relocking bootloader would help you to enter TWRP, but it's too late for discussions about.
Relocking bootloader trigers hard reset, but hard reset fails if you don't have stock partititions (eg, TWRP means you don't have stock recovery, root means you don't have stock boot partition).
You didn't have and you don't have OS (hence you will not be able to Unlock OEM, and if TWRP was deleted, you can't flash it - TWRP is usually needed to recover)
You should first find out what you really have now :
Press power for long (if needed, even for half a minute), to make sure phone switches off. Make sure USB is disconnected. Boot by Vol+, Vol- and Pow: does it boot to TWRP, eRecovery or to nowhere?
Turn off again, connect by USB to PC (same USB cable, same PC you previously flashed TWRP from or locked/relocked your bootloader from). Power on by Vol- and Pow, does it boot to Fastboot and does Fastboot say that FRP and Bootloader are locked or unlocked.
If you still have TWRP (first test) or if Bootloadr and FRP are unlocked (test 2) in which case you can flash TWRP -you are good, you can try some methods to install stock ROM through TWRP, like HWOTA method:
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
If you have eRecovery, you can pull out SD card and pepare it for DLOAD instalation of ROM.
Bad if you don't have any recovery and FRP and/or Bootloader is locked. Maybe DC Phoenix can help you then
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
zgfg said:
Don't understand why you thought that relocking bootloader would help you to enter TWRP, but it's too late for discussions about.
Relocking bootloader trigers hard reset, but hard reset fails if you don't have stock partititions (eg, TWRP means you don't have stock recovery, root means you don't have stock boot partition).
You didn't have and you don't have OS (hence you will not be able to Unlock OEM, and if TWRP was deleted, you can't flash it - TWRP is usually needed to recover)
You should first find out what you really have now :
Press power for long (if needed, even for half a minute), to make sure phone switches off. Make sure USB is disconnected. Boot by Vol+, Vol- and Pow: does it boot to TWRP, eRecovery or to nowhere?
Turn off again, connect by USB to PC (same USB cable, same PC you previously flashed TWRP from or locked/relocked your bootloader from). Power on by Vol- and Pow, does it boot to Fastboot and does Fastboot say that FRP and Bootloader are locked or unlocked.
If you still have TWRP (first test) or if Bootloadr and FRP are unlocked (test 2) in which case you can flash TWRP -you are good, you can try some methods to install stock ROM through TWRP, like HWOTA method:
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
If you have eRecovery, you can pull out SD card and pepare it for DLOAD instalation of ROM.
Bad if you don't have any recovery and FRP and/or Bootloader is locked. Maybe DC Phoenix can help you then
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Click to expand...
Click to collapse
Thank you so much for your answer @zgfg
Thanks to you I understood that the phone was never really turning off no matter how long I press (I tried for 1 min approx), so I left it to discharge and when I plugged in I pressed the 3 buttons and it "boots" to EMUI eRecovery. Then I tried the download and restore but it failed of course. I reboot with USB and Vol- and Pow, and it loads the white screen with
FASTBOOT&RESCUE MODE
Please Connect Usb Cabke ti
Your Computer and Open Hisuite
...
Android reboot reason:
coldboot
NA
volumnkey_down_press_process_func
...
PHONE Relocked
FRP Unlock
So I understand that I am in this case right?
"If you still have TWRP (first test) or if Bootloadr and FRP are unlocked (test 2)"
If this is the case I will try this method tomorrow. Thank you so much again!
---------- Post added at 02:52 AM ---------- Previous post was at 02:29 AM ----------
I unlocked the oem with "sudo fastboot oem unlock XXXX" it seems to do nothing
lexoyo said:
Thank you so much for your answer @zgfg
Thanks to you I understood that the phone was never really turning off no matter how long I press (I tried for 1 min approx), so I left it to discharge and when I plugged in I pressed the 3 buttons and it "boots" to EMUI eRecovery. Then I tried the download and restore but it failed of course. I reboot with USB and Vol- and Pow, and it loads the white screen with
FASTBOOT&RESCUE MODE
Please Connect Usb Cabke ti
Your Computer and Open Hisuite
...
Android reboot reason:
coldboot
NA
volumnkey_down_press_process_func
...
PHONE Relocked
FRP Unlock
So I understand that I am in this case right?
"If you still have TWRP (first test) or if Bootloadr and FRP are unlocked (test 2)"
If this is the case I will try this method tomorrow. Thank you so much again!
---------- Post added at 02:52 AM ---------- Previous post was at 02:29 AM ----------
I unlocked the oem with "sudo fastboot oem unlock XXXX" it seems to do nothing
Click to expand...
Click to collapse
With FRP Unlocked you can try to unlock Bootloader - it will fail to hard reset, but if it unlocks, you will be able to flash TWRP.
With TWRP you can try - download and use stock ROM for your model:
https://forum.xda-developers.com/showpost.php?p=74169408&postcount=7
zgfg said:
With FRP Unlocked you can try to unlock Bootloader - it will fail to hard reset, but if it unlocks, you will be able to flash TWRP.
With TWRP you can try - download and use stock ROM for your model:
https://forum.xda-developers.com/showpost.php?p=74169408&postcount=7
Click to expand...
Click to collapse
It did unlock FRP I think, it's now
PHONE Unlocked
FRP Unlock
I did a "fastboot flash recovery twrp-3.1.1-1-eva.img" but I still can't access TWRP
Sorry if it is a noob question, I'm learning and I looked for an answer all day long :facepalm:
lexoyo said:
It did unlock FRP I think, it's now
PHONE Unlocked
FRP Unlock
I did a "fastboot flash recovery twrp-3.1.1-1-eva.img" but I still can't access TWRP
Sorry if it is a noob question, I'm learning and I looked for an answer all day long :facepalm:
Click to expand...
Click to collapse
Are you on P9 Nougat?
Better use TWRP from here
https://forum.xda-developers.com/showpost.php?p=75787111&postcount=1
Nevertheless, what does it mean you cannot access TWRP - does Fastboot on the PC side report successful flashing?
If so, then
- keep USB connected to both phone and PC
- press and keep pressing Vol+, Vol- and Pow on the phone (it will not reboot yet)
-execute fastboot reboot
and immediately after disconnect USB
-keep presing three buttons as above, release Pow when it shows booting
You must be quick (with USB disconnectibg) and do exactly as above - with that phone should reboot to TWRP
If you don"t get it, phone will reboot to System and you will loose TWRP (you will have to flash TWRP agai)
Only when you first time upon flashing enter TWRP as above, TWRP will remain and later you will be able to enter TWRP as usual
Solution
For anyone pretty much, who has ****ed up his Huawei P9:
I got to the state where I could only enter Fastboot mode (Press vol- and connect power cable). When I tried to start the phone / go into recovery it would only display the "Your device has been unlocked and can't be trusted" Message. My mistake was to relock the bootloader in an attempt to get the recovery to work.
I looked for hours for the answer, here is what worked for me:
follow this tutorial (the "update firmware" part)
German
English
But with real precision, every step.
If you have a european unbranded L09 you should be fine using the firmware you can find on this site:
https://thedroidguru.com/download-install-huawei-p9-b394-nougat-update-europe/
if not you gotta find the full firmware (3 files!!) yourself - good luck!
If you only want to go back to stock you should be fine afterwards.
If you want to install twrp for root/custom rom/... follow these steps after installing twrp with the tool:
Upon flashing TWRP, FIRST THING YOU MUST DO is rebooting to TWRP. If you don't do that, stock Recovery will ovewrite TWRP.
Find instructions in the TWRP threads how to enforce immediate booting to TWRP, upon you flashed it:
-Type on the PC: fastboot reboot -but don't press Enter yet.
-Press and keep pressing Vol+ and Power buttons together on the phone
-Press Enter on the PC and then immediately unplug USB cabel.
-When phone shows Booting, release Power but keep pressing Vol+. button
Hope this helps, I don't take responsability for anything, happy flashing!
Hey guys,
This is a bit of a long one so please bear with me...
I have an EU EVA-L09 which was running EVA-L09C432B166 unrooted and with a locked bootloader. I decided to unlock it which I did successfully (Fastboot was showing both Phone & FRP as unlocked) and flashed TWRP on to it as well as BETA-SuperSU-v2.65.
After a few days with my stock email app not working and Battery Settings unaccessable since rooting (not to mention the warning message every time I booted my phone) I decided it wasn't worth it and wanted to remove it all and go back to stock. I was struggling to find a stock rom due to being impatient and just removed root via SuperSU app on my phone.
I found a stock recovery image which I tried to flash on to the phone using the BAT file (PASO 3 VOLVER A RECOVERY STOCK) which didn't seem to work. I also tried to do it via cmd line and was faced with "FAILED (remote: Command not allowed)." I also noticed that FRP was showing as locked now in fastboot. I did unlock it using DC Unlocker but it's still displaying as locked (after some research on the forum this seems normal.)
I tried to update to Nougat 7.0 by Wiping in TWRP and then installing Update.zip from another thread on this forum. This worked great but stupidly I forgot to install the EU pack zip which accompanied it before rebooting. Unfortunately this has now installed a limited version of Nougat on to the phone whilst simultaneously removing TWRP so I can't install the other zip.
I have tried to install the other zip and some old firmware using dload method but I always get stuck on 5%. I have also tried flashing TWRP again but I am facing the same , ""FAILED (remote: Command not allowed)" error. The error is also displayed when I try to re-lock the bootloader. The bootloader is definitely unlocked as I have checked with cmd line & the warning message is still being displayed on booting up. I have USB debugging enabled but am unable to enable OEM Unlock due to the option being greyed out (seems to be the case when FRP is unlocked.)
I can't do any updates using 3 button technique they all get stuck on 5%. I can't submit any flash commands in cmd.exe without getting the "command not allowed error."
There is a bit of hope because I can boot in to Nougat but it's very limited with no apps and no keyboard.
Can anybody help?
DCStreamer said:
Hey guys,
This is a bit of a long one so please bear with me...
I have an EU EVA-L09 which was running EVA-L09C432B166 unrooted and with a locked bootloader. I decided to unlock it which I did successfully (Fastboot was showing both Phone & FRP as unlocked) and flashed TWRP on to it as well as BETA-SuperSU-v2.65.
After a few days with my stock email app not working and Battery Settings unaccessable since rooting (not to mention the warning message every time I booted my phone) I decided it wasn't worth it and wanted to remove it all and go back to stock. I was struggling to find a stock rom due to being impatient and just removed root via SuperSU app on my phone.
I found a stock recovery image which I tried to flash on to the phone using the BAT file (PASO 3 VOLVER A RECOVERY STOCK) which didn't seem to work. I also tried to do it via cmd line and was faced with "FAILED (remote: Command not allowed)." I also noticed that FRP was showing as locked now in fastboot. I did unlock it using DC Unlocker but it's still displaying as locked (after some research on the forum this seems normal.)
I tried to update to Nougat 7.0 by Wiping in TWRP and then installing Update.zip from another thread on this forum. This worked great but stupidly I forgot to install the EU pack zip which accompanied it before rebooting. Unfortunately this has now installed a limited version of Nougat on to the phone whilst simultaneously removing TWRP so I can't install the other zip.
I have tried to install the other zip and some old firmware using dload method but I always get stuck on 5%. I have also tried flashing TWRP again but I am facing the same , ""FAILED (remote: Command not allowed)" error. The error is also displayed when I try to re-lock the bootloader. The bootloader is definitely unlocked as I have checked with cmd line & the warning message is still being displayed on booting up. I have USB debugging enabled but am unable to enable OEM Unlock due to the option being greyed out (seems to be the case when FRP is unlocked.)
I can't do any updates using 3 button technique they all get stuck on 5%. I can't submit any flash commands in cmd.exe without getting the "command not allowed error."
There is a bit of hope because I can boot in to Nougat but it's very limited with no apps and no keyboard.
Can anybody help?
Click to expand...
Click to collapse
Yes... Downgrade to MM with the rollback
Then flash full B136 and update
Enviado desde mi EVA-L09 mediante Tapatalk
jcalderonv74 said:
Yes... Downgrade to MM with the rollback
Then flash full B136 and update
Enviado desde mi EVA-L09 mediante Tapatalk
Click to expand...
Click to collapse
Hey @jcalderonv74 thank you for the response. I have just re-tried to do that on your suggestion and with the intermediate UPDATE.app in the dload folder on my external SD I get to the stage of the 3 button start up as per the instructions and Installing Update gets stuck on 5%.
I have noticed I do have access to stock recovery using "adb reboot recovery" command.
Any more ideas?
DCStreamer said:
Hey @jcalderonv74 thank you for the response. I have just re-tried to do that on your suggestion and with the intermediate UPDATE.app in the dload folder on my external SD I get to the stage of the 3 button start up as per the instructions and Installing Update gets stuck on 5%.
I have noticed I do have access to stock recovery using "adb reboot recovery" command.
Any more ideas?
Click to expand...
Click to collapse
Your really used the rollback package?
http://consumer.huawei.com/ch/support/products/downloads/detail/p9-chde.htm?id=92743
Have you full battery?
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
xtcislove said:
Your really used the rollback package?
Click to expand...
Click to collapse
Hi, yeah I did use the rollback package @xtcislove and it would just get stuck on 5% using the dload method, and trying to flash it in command line would result in "Command not allowed".
darrr1 said:
Have you full battery?
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
Click to expand...
Click to collapse
@darrr1 yes the battery was full but still it wouldn't work
Ok just for completion and anybody who is having the same issues as I have had with the same or similar model of P9, this is how I solved it (after a day without sleep and a couple of migraines). Please note this is only to be used if you have exhausted all other, free options on this forum as this is slightly risky and costs money. It's a last resort.
What you'll need:
- HiSuite installed but closed on your PC
- USB cable to connect phone to PC
- DC-Phoenix with an account with 15 credits (15 Euro)
- The DC-Phoenix guide opened at "Method 2"
- Firmware .img file from their database by clicking "Enter Support Area" button in DC-Phoenix (EVA-AL10_M00A056_Factory_firmware_Global_Nonspecific_Android_6.0_EMUI_4.1.dgtks)
- Stock firmware as an .app file on an SDCard in a folder named "dload" (I used EVA-L09C432B182 (UPDATE.APP))
Method:
1. Copy the official stock firmware .app file to your SDCard inside a folder named "dload".
2. Remove SDCard & Sim Card from the phone.
3. Put your phone in to Fastboot (Turn off phone, hold volume(down), insert usb cable).
4. Load DC-Phoenix and select Fastboot mode.
5. Click "IMG Files" tab and locate the .dgtks file using the "Config or recovery file:" field.
6. DO NOT uncheck the boxes next to "Not erase NV" and "Not erase oeminfo" as this will delete your IMEI and other information completely.
7. Click UPDATE and wait for it to fully finish (you may see an error regarding FBlocks but it should still go on to complete).
8. Once you see it is completed, disconnect phone from PC and restart the phone by holding the power button.
9. This should load you in to a very basic firmware (it may take one or two reboots to achieve this).
10. Insert your SDCard with the newer, official, stock firmware that you want on the phone in to the SDCard slot WITHOUT SimCard.
11. On your phone home you should see an icon named "Upgrade" or "Upgrade/Update Phone" on the first page. (I've forgotten the exact name of the icon but it will be obvious to you).
12. Click that icon and it should go ahead and install the firmware .app on to the phone off your SDCard.
After following the on screen instructions you should now be back to stock firmware. I recommend re-locking your bootloader now using fastboot and your unlock key if you are trying to do so. If you go on to update to Nougat 7.0 before locking your bootloader back up you won't be able to do so without downgrading back to the same firmware that was on your phone when you originally unlocked it.)
Hope this helps somebody who is stuck and exhausted every other avenue with nothing left to lose.
Danny
I had a similar issue after doing this :- unlock bootloader...root MM....Upgrade to Nougat...root...Rollback to MM...root...Upgrade to Nougat.. borked!!!
I was left with a phone that only booted to bootloader and no recovery or possibility of flashing with dload worked.
Luckily DC Phoenix got it into a usable state where i could enter erecovery and flash Nougat again. Seems the backdoor method they use to load the OS, at least at a low level, is very effective!
There's probably a lesson here, but I've never had a phone so easily bricked....
Thanks :good:
Peace
---------- Post added at 07:57 AM ---------- Previous post was at 07:53 AM ----------
DCStreamer said:
Please note this is only to be used if you have exhausted all other, free options on this forum as this is slightly risky and costs money. It's a last resort.
Click to expand...
Click to collapse
:good::good:
DCStreamer said:
Ok just for completion and anybody who is having the same issues as I have had with the same or similar model of P9, this is how I solved it (after a day without sleep and a couple of migraines). Please note this is only to be used if you have exhausted all other, free options on this forum as this is slightly risky and costs money. It's a last resort.
What you'll need:
- HiSuite installed but closed on your PC
- USB cable to connect phone to PC
- DC-Phoenix with an account with 15 credits (15 Euro)
- The DC-Phoenix guide opened at "Method 2"
- Firmware .img file from their database by clicking "Enter Support Area" button in DC-Phoenix (EVA-AL10_M00A056_Factory_firmware_Global_Nonspecific_Android_6.0_EMUI_4.1.dgtks)
- Stock firmware as an .app file on an SDCard in a folder named "dload" (I used EVA-L09C432B182 (UPDATE.APP))
Method:
1. Copy the official stock firmware .app file to your SDCard inside a folder named "dload".
2. Remove SDCard & Sim Card from the phone.
3. Put your phone in to Fastboot (Turn off phone, hold volume(down), insert usb cable).
4. Load DC-Phoenix and select Fastboot mode.
5. Click "IMG Files" tab and locate the .dgtks file using the "Config or recovery file:" field.
6. DO NOT uncheck the boxes next to "Not erase NV" and "Not erase oeminfo" as this will delete your IMEI and other information completely.
7. Click UPDATE and wait for it to fully finish (you may see an error regarding FBlocks but it should still go on to complete).
8. Once you see it is completed, disconnect phone from PC and restart the phone by holding the power button.
9. This should load you in to a very basic firmware (it may take one or two reboots to achieve this).
10. Insert your SDCard with the newer, official, stock firmware that you want on the phone in to the SDCard slot WITHOUT SimCard.
11. On your phone home you should see an icon named "Upgrade" or "Upgrade/Update Phone" on the first page. (I've forgotten the exact name of the icon but it will be obvious to you).
12. Click that icon and it should go ahead and install the firmware .app on to the phone off your SDCard.
After following the on screen instructions you should now be back to stock firmware. I recommend re-locking your bootloader now using fastboot and your unlock key if you are trying to do so. If you go on to update to Nougat 7.0 before locking your bootloader back up you won't be able to do so without downgrading back to the same firmware that was on your phone when you originally unlocked it.)
Hope this helps somebody who is stuck and exhausted every other avenue with nothing left to lose.
Danny
Click to expand...
Click to collapse
Vou are the best, yeppie !! You save my live..because I have not damaged myself and tyrannized my family as it would have been possible, if you had not helped :good: Huawei P9 Plus Dual-Sim
Thank you so much!!
I can't believe how much I have scoured through the interwebs untill i came to your post.
I even went through all other DC-Unlocker options including the HCU client, which I burned another 19e on. -_-
I know you posted this over 3 years ago. But thank you for doing it! <3
Huawei p9
DCStreamer said:
Ok just for completion and anybody who is having the same issues as I have had with the same or similar model of P9, this is how I solved it (after a day without sleep and a couple of migraines). Please note this is only to be used if you have exhausted all other, free options on this forum as this is slightly risky and costs money. It's a last resort.
What you'll need:
- HiSuite installed but closed on your PC
- USB cable to connect phone to PC
- DC-Phoenix with an account with 15 credits (15 Euro)
- The DC-Phoenix guide opened at "Method 2"
- Firmware .img file from their database by clicking "Enter Support Area" button in DC-Phoenix (EVA-AL10_M00A056_Factory_firmware_Global_Nonspecific_Android_6.0_EMUI_4.1.dgtks)
- Stock firmware as an .app file on an SDCard in a folder named "dload" (I used EVA-L09C432B182 (UPDATE.APP))
Method:
1. Copy the official stock firmware .app file to your SDCard inside a folder named "dload".
2. Remove SDCard & Sim Card from the phone.
3. Put your phone in to Fastboot (Turn off phone, hold volume(down), insert usb cable).
4. Load DC-Phoenix and select Fastboot mode.
5. Click "IMG Files" tab and locate the .dgtks file using the "Config or recovery file:" field.
6. DO NOT uncheck the boxes next to "Not erase NV" and "Not erase oeminfo" as this will delete your IMEI and other information completely.
7. Click UPDATE and wait for it to fully finish (you may see an error regarding FBlocks but it should still go on to complete).
8. Once you see it is completed, disconnect phone from PC and restart the phone by holding the power button.
9. This should load you in to a very basic firmware (it may take one or two reboots to achieve this).
10. Insert your SDCard with the newer, official, stock firmware that you want on the phone in to the SDCard slot WITHOUT SimCard.
11. On your phone home you should see an icon named "Upgrade" or "Upgrade/Update Phone" on the first page. (I've forgotten the exact name of the icon but it will be obvious to you).
12. Click that icon and it should go ahead and install the firmware .app on to the phone off your SDCard.
After following the on screen instructions you should now be back to stock firmware. I recommend re-locking your bootloader now using fastboot and your unlock key if you are trying to do so. If you go on to update to Nougat 7.0 before locking your bootloader back up you won't be able to do so without downgrading back to the same firmware that was on your phone when you originally unlocked it.)
Hope this helps somebody who is stuck and exhausted every other avenue with nothing left to lose.
Danny
Click to expand...
Click to collapse
Dear DCStreamer,
I tried to follow your procedures with my Huawei tablet but don't work: where I wrong?