Hi all,
I introduce you to the first release of LePro3 sound modification. This modification makes your LePro 3 sounds a lot better with AOSP,Lineage ROM. It will give you clear voice on handset and speaker, no distortion. Also this build will give you good lowers (bass). I made the sound mod ready to flash via TWRP.
After installation please make sure you have this values on build.prop:
ro.vendor.audio.sdk.fluencetype=fluence
persist.vendor.audio.fluence.voicerec=true
persist.vendor.audio.fluence.speaker=true
use.voice.path.for.pcm.voip=true
persist.vendor.audio.fluence.audiorec=true
Any bug please report in here. This is a new project.
You never responded to this https://forum.xda-developers.com/showpost.php?p=75482276&postcount=1878
Hi,in AICP 20171024, it's work?
Abdiel1224 said:
Hi all,
I introduce you to the first release of LePro3 sound modification. This modification makes your LePro 3 sounds a lot better with AOSP,Lineage ROM. It will give you clear voice on handset and speaker, no distortion. Also this build will give you good lowers (bass). I made the sound mod ready to flash via TWRP.
After installation please make sure you have this values on build.prop:
ro.vendor.audio.sdk.fluencetype=fluence
persist.vendor.audio.fluence.voicerec=true
persist.vendor.audio.fluence.speaker=true
use.voice.path.for.pcm.voip=true
persist.vendor.audio.fluence.audiorec=true
Any bug please report in here. This is a new project.
Click to expand...
Click to collapse
What value should I change in the file mixer_paths_tasha.xml, to raise only the speaker volume during calls and not the global volume?
The volume of notifications is too high even putting it to a minimum ...
Is it possible to have indications on what are the values of the various volumes in the file mixer_paths_tasha.xml? so I could try to do some tests ...
Galushkin_ilya said:
Hi,in AICP 20171024, it's work?
Click to expand...
Click to collapse
Yes it works any Rom
Palm Trees said:
You never responded to this https://forum.xda-developers.com/showpost.php?p=75482276&postcount=1878
Click to expand...
Click to collapse
You can try it now, because we have the lower that we were misaing at the beginning. Try it and let me know
giogio1 said:
What value should I change in the file mixer_paths_tasha.xml, to raise only the speaker volume during calls and not the global volume?
The volume of notifications is too high even putting it to a minimum ...
Is it possible to have indications on what are the values of the various volumes in the file mixer_paths_tasha.xml? so I could try to do some tests ...
Click to expand...
Click to collapse
Go over speaker-stereo but you dont have to make any change there since is good if its too loud just use the Volume soft keys
Abdiel1224 said:
Go over speaker-stereo but you dont have to make any change there since is good if its too loud just use the Volume soft keys
Click to expand...
Click to collapse
The volume of notifications is too high even putting it to a minimum
giogio1 said:
The volume of notifications is too high even putting it to a minimum
Click to expand...
Click to collapse
Go to speaker-stereo and modify digital gain from 55 to 48.
Abdiel1224 said:
Go to speaker-stereo and modify digital gain from 55 to 48.
Click to expand...
Click to collapse
from your zip file "speaker-stereo" Digital Gain value is 66 no 55
edit: however I set it to 48, but the volume of notifications even at a minimum is too high
giogio1 said:
from your zip file "speaker-stereo" Digital Gain value is 66 no 55
edit: however I set it to 48, but the volume of notifications even at a minimum is too high
Click to expand...
Click to collapse
Just replace for this one and reset your device.
Abdiel1224 said:
Just replace for this one and reset your device.
Click to expand...
Click to collapse
no difference .. the notification sound is too loud even with the volume at a minimum... which rom u are using ? I'm on latest AICP 13.1 official
giogio1 said:
no difference .. the notification sound is too loud even with the volume at a minimum... which rom u are using ? I'm on latest AICP 13.1 official
Click to expand...
Click to collapse
Same as you go to settings and play with notification sound you will see the difference. Thats what I did and I see the difference
Quick question...
Abdiel1224 said:
Same as you go to settings and play with notification sound you will see the difference. Thats what I did and I see the difference
Click to expand...
Click to collapse
Hi. This will work if I have Dolby Atmos working? I`m on latest AICP Oreo 8.1 official, by the way...
Thank you. Great job
Tried it with the latest experimental aicp. Unless it was a coincidence, it broke my ability to listen to Google play music through a cdla adapter and my ability to record voice texts through the signal messaging app. When I copied the original etc folder back to root to revert the changes both my issues we're fixed following a reboot. Maybe it's because I didn't install it through recovery. I just took the files from the zip and moved them which seems easier.
Sent from my LEX727 using XDA Labs
Has anyone tested it?
How is it working?
Is there any problem during the call?
Microphone, handset, speaker etc ...
lazye53 said:
Has anyone tested it?
How is it working?
Is there any problem during the call?
Microphone, handset, speaker etc ...
Click to expand...
Click to collapse
There is none during the call.
Yeah, it's almost perfect for me.
The notification sounds are a little high.
Also, the sounds on YouTube videos I watch seem to be echoing on the wall.
Sounds right during the call, I have not tested the microphone yet ...
@Abdiel1224
Edit: Instagram video is very high even at the lowest audio track.
And the camera sounds are too loud. I'm terrified when I press the button to take a picture.
What can I do about it?
lazye53 said:
Yeah, it's almost perfect for me.
The notification sounds are a little high.
Also, the sounds on YouTube videos I watch seem to be echoing on the wall.
Sounds right during the call, I have not tested the microphone yet ...
@Abdiel1224
Edit: Instagram video is very high even at the lowest audio track.
And the camera sounds are too loud. I'm terrified when I press the button to take a picture.
What can I do about it?
Click to expand...
Click to collapse
the quality and clarity is great but we need some dev to get their hands on this mod to adjust the volumes of notifications etc .. the potentials of this mod are noticeable but we need to adjust the volumes.
Related
Can anyone suggest why I no longer get the camera shutter sound? It doesn't work with the stock camera app (I mean the one that comes with the ROM I'm using) or third party ones. I can't find any settings disabled.
I recently had a repair done at Samsung which involved replacing the motherboard. I didn't test every single setting and function when I got it back so am tempted to assume it is related to the repair but I could be wrong.
The camera is rooted and I'm using the Ultimate XXLT4 JB 4.1.2 v6
Thanks in advance
Trevor
Camera shutter sound adendum
Has no one else come across this? Most posts about the shutter sound are about how to turn it off so I guess my problem is unique. I checked that the /system/media/audio/ui/shuter.ogg file is there. It is and I can play it manually with the stock music player. Other than that, I've no idea how to fix this. All othet system sounds and alerts sem to work ok.
I'm still hoping some expert out there can help.
Trevor
sacentre said:
Has no one else come across this? Most posts about the shutter sound are about how to turn it off so I guess my problem is unique. I checked that the /system/media/audio/ui/shuter.ogg file is there. It is and I can play it manually with the stock music player. Other than that, I've no idea how to fix this. All othet system sounds and alerts sem to work ok.
I'm still hoping some expert out there can help.
Trevor
Click to expand...
Click to collapse
Hello. When you mean you don't get a shutter sound, does that mean that in camera/setting/shutter sound already enabled but no sound? please note that music or notification volume level (I forgot which one) also play a part. If your volume level is 0 or very low, the sound will not be heard. This was a trick to eliminate shutter shound back in the days when the option to disable is not there.
Jackwu696 said:
Hello. When you mean you don't get a shutter sound, does that mean that in camera/setting/shutter sound already enabled but no sound? please note that music or notification volume level (I forgot which one) also play a part. If your volume level is 0 or very low, the sound will not be heard. This was a trick to eliminate shutter shound back in the days when the option to disable is not there.
Click to expand...
Click to collapse
Thanks for replying. This was the first thing I checked.
There's no option to enable/ disable shutter sound in the stock camera app I'm using and I imagine this is why so many people were asking how to disable the sound. Can't recall if I ever saw that in the settings menu. I also have an app called CameraPro which has an Enable Shutter Sound. This is enabled but , makes no difference. It's possible I'm using an older version of the stock cameras app but it seems to me this is not the cause as it makes no difference which camera app I use.
Thanks again.
Trevor
Camera shutter problem fixed
sacentre said:
Thanks for replying. This was the first thing I checked.
There's no option to enable/ disable shutter sound in the stock camera app I'm using and I imagine this is why so many people were asking how to disable the sound. Can't recall if I ever saw that in the settings menu. I also have an app called CameraPro which has an Enable Shutter Sound. This is enabled but , makes no difference. It's possible I'm using an older version of the stock cameras app but it seems to me this is not the cause as it makes no difference which camera app I use.
Thanks again.
Trevor
Click to expand...
Click to collapse
I managed to fix this by installing the jobnik_Camera_Note_JB_Mod_v8_cwm.zip.
http://forum.xda-developers.com/showthread.php?t=1863362
Now both my camera apps have shutter sound enabled. Still don't know what happened since the previous version of the app worked fine before but that's often the way with computers: just happy to fix the problem in the end.
Thanks
sacentre said:
I managed to fix this by installing the jobnik_Camera_Note_JB_Mod_v8_cwm.zip.
http://forum.xda-developers.com/showthread.php?t=1863362
Now both my camera apps have shutter sound enabled. Still don't know what happened since the previous version of the app worked fine before but that's often the way with computers: just happy to fix the problem in the end.
Thanks
Click to expand...
Click to collapse
Thank you so much.
This is a small tweak to increase the sample rate from 44100hz to 48000hz,
most of the users might experience little to no difference in sound after using this tweak.
so dont blame me and use it if you like it
just download the attachment file and extract it and copy the audio_policy.conf file to
system/etc/
directory
and replace it, reboot and enjoy.
here is the screenshot for confirmation
How can i boost the volume of headphones in CM12.1 in my MT6592 (blu life 8)????
I Try every mod sound (viper, beats, dolby, etc) works, but the sound still low
i dont have the file "/device/etc/sound/to3g"
i dont have the file "mixer_paths.xml"
Thanks
I also cannot find to3g or mixer path file. Developer please help.
Sent from my Android One using XDA Free mobile app
viciuz said:
How can i boost the volume of headphones in CM12.1 in my MT6592 (blu life 8)????
I Try every mod sound (viper, beats, dolby, etc) works, but the sound still low
i dont have the file "/device/etc/sound/to3g"
i dont have the file "mixer_paths.xml"
Thanks
Click to expand...
Click to collapse
It might be possible your your headphones need more power for louder sound or your phone has bad audio chip or an software bug.
viciuz said:
How can i boost the volume of headphones in CM12.1 in my MT6592 (blu life 8)????
I Try every mod sound (viper, beats, dolby, etc) works, but the sound still low
i dont have the file "/device/etc/sound/to3g"
i dont have the file "mixer_paths.xml"
Thanks
Click to expand...
Click to collapse
bsahave said:
I also cannot find to3g or mixer path file. Developer please help.
Sent from my Android One using XDA Free mobile app
Click to expand...
Click to collapse
Go buy some low impedance high sensitivity headphones.
hello guys i just rooted mi5 and tested v4a it was good.
there is new rom called AOSPA i want to test it it has aptx for better music performence...
do u know any thing for making mi5 better for music ?thanks
also MIUI has aptxHD! but you also need a Bluetooth device that have aptxHD!
big bang021 said:
hello guys i just rooted mi5 and tested v4a it was good.
there is new rom called AOSPA i want to test it it has aptx for better music performence...
do u know any thing for making mi5 better for music ?thanks
Click to expand...
Click to collapse
For now if you wanna listen music just use MIUI ROM because for now, most custom rom have a bad sound bug if use headphones uses jack port. For Bluetooth i don't know tho, i never use a Bluetooth headphones before so i can't tell, but i think the bug will affect Bluetooth too.
There is a great sound mod called "Ainur Sauron"
Here is the link:
https://forum.xda-developers.com/android/software/soundmod-ainur-audio-t3450516
You just have to flash it, no need to setup anything else
I don't think it is compatible with MIUI
So you can try flashing it on a custom ROM
I've been using it for a while now, and my audio output improved greatly.
Hope this helps
Hellkyrie said:
There is a great sound mod called "Ainur Sauron"
Here is the link:
https://forum.xda-developers.com/android/software/soundmod-ainur-audio-t3450516
You just have to flash it, no need to setup anything else
I don't think it is compatible with MIUI
So you can try flashing it on a custom ROM
I've been using it for a while now, and my audio output improved greatly.
Hope this helps
Click to expand...
Click to collapse
yes i have tested it .not bad
WELL I USED TO USE BEATS+POWER AMP AT START
THEN USED V4A
THEN I STARTED SOUNDMODS...biohazard was nice
but now i, using magisk modules they are very good they can do effect better ....and i also increased volume of smart phone now i really get awsome bass i ....the only problem here is some times i get lower voulme in middle of enjoying music i think its security for less damage to ears idk how to fix that thing
big bang021 said:
.the only problem here is some times i get lower voulme in middle of enjoying music i think its security for less damage to ears idk how to fix that thing
Click to expand...
Click to collapse
Are you on earphones when the volume lowers? If so, maybe the V4A setting called "auditory system protection" causes it. Also, disable notification sounds/enable silent mode while you are playing music, or change the Poweramp audio focus setting (Poweramp -> settings -> audio -> untick Short Audio Focus change)
I used to have the same problem as you, when I was using Xtreme music mod and Dolby Atmos.
Hellkyrie said:
There is a great sound mod called "Ainur Sauron"
Here is the link:
https://forum.xda-developers.com/android/software/soundmod-ainur-audio-t3450516
You just have to flash it, no need to setup anything else
I don't think it is compatible with MIUI
So you can try flashing it on a custom ROM
I've been using it for a while now, and my audio output improved greatly.
Hope this helps
Click to expand...
Click to collapse
Can i flash this over dolby atmos? I need louder sound quality especially for dialogues through speakers. Dolby is already doing a great job. Should this one do any improvement? Or should i uninstall dolby and flash this? Need louder sound on speakers
Sent from my iPhone using Tapatalk
SilverMarcs said:
Can i flash this over dolby atmos? I need louder sound quality especially for dialogues through speakers. Dolby is already doing a great job. Should this one do any improvement? Or should i uninstall dolby and flash this? Need louder sound on speakers
Click to expand...
Click to collapse
This mod is compatible with all other audio mods, but make a backup of your system in case anything goes wrong. Try flashing it over your Dolby
I tried flashing Ainur first then Dolby, the Dolby app crashed.
Hellkyrie said:
Are you on earphones when the volume lowers? If so, maybe the V4A setting called "auditory system protection" causes it. Also, disable notification sounds/enable silent mode while you are playing music, or change the Poweramp audio focus setting (Poweramp -> settings -> audio -> untick Short Audio Focus change)
I used to have the same problem as you, when I was using Xtreme music mod and Dolby Atmos.
Click to expand...
Click to collapse
yes is true
I edited the mixer_paths.xml to fix the low headphone volume on MiA2 and created a magisk module since manual editing doesn't work.
It works on Pie March update. May not work on other versions.
Use it at your own risk. It is LOUD. Listening at a high volume for a long time may damage hearing.
Edit: Updated to V10.0.5.0
Thanks man! Its working great??
@onbeskarakterli Can you please tell what you edited in the file so that everyone can fix it themselves in case it stops working after software updates?
Varun.Shanbhag said:
@onbeskarakterli Can you please tell what you edited in the file so that everyone can fix it themselves in case it stops working after software updates?
Click to expand...
Click to collapse
these are the changes
Varun.Shanbhag said:
@onbeskarakterli Can you please tell what you edited in the file so that everyone can fix it themselves in case it stops working after software updates?
Click to expand...
Click to collapse
Well, the problem is we can't just edit the file on the phone. Editing doesn't make any difference and the phone reverts it. Magisk is the only way right now.
I have a request if you don't mind, I have limited experience in these config files.
One thing that bothers me about this phone is the audio quality in the videos it takes. The audio sampling rate is currently set to 96 kb/s which is extremely low for a phone made in 2018.
I have tried to edit it to 256 kb/s in the media_profile files under the vendor folder and flashed it with magisk but it is still stuck to the low quality setting. Any ideas?
Thank you
Thank you so much for this module. Works perfectly ?
Thanks @onbeskarakterli
lukezainn said:
I have a request if you don't mind, I have limited experience in these config files.
One thing that bothers me about this phone is the audio quality in the videos it takes. The audio sampling rate is currently set to 96 kb/s which is extremely low for a phone made in 2018.
I have tried to edit it to 256 kb/s in the media_profile files under the vendor folder and flashed it with magisk but it is still stuck to the low quality setting. Any ideas?
Thank you
Click to expand...
Click to collapse
Can you try gcam module and Google Camera app? I successfully changed the lines in that file but stock camera app still records at 96k. Gcam is at 160k-200k.
onbeskarakterli said:
Can you try gcam module and Google Camera app? I successfully changed the lines in that file but stock camera app still records at 96k. Gcam is at 160k-200k.
Click to expand...
Click to collapse
I tried that but it doesn't seem to work for me, do you mind sharing your files?
Wow finally thanks man I'm going to try it right now. Do you know why it keeps reverting to stock values? I tried several times before with no luck...I tried to change selinux as well to permissive but even that reverts back after a while. Why it works only with magisk? BTW it's great you already put it to 88 so it covers everyone's needs
Sent from my Mi A2 using Tapatalk
lukezainn said:
I tried that but it doesn't seem to work for me, do you mind sharing your files?
Click to expand...
Click to collapse
This is the GCam I am using.
https://forum.xda-developers.com/mi-a2/how-to/gcam-pixel-3-v6-1-mi-a2-android-pie-t3870179
Try it and let me know the audio bitrate.
Sp_Ark said:
Wow finally thanks man I'm going to try it right now. Do you know why it keeps reverting to stock values? I tried several times before with no luck...I tried to change selinux as well to permissive but even that reverts back after a while. Why it works only with magisk? BTW it's great you already put it to 88 so it covers everyone's needs
Sent from my Mi A2 using Tapatalk
Click to expand...
Click to collapse
Manually changing doesn't work. You can't even save the changes you make. AFAIK Magisk virtually mounts system and vendor partitions and applies its own files and changes at boot time. That's why it works.
To be honest 88 is really high. I am using 85 right now, but I don't have any high impedance headphones.
onbeskarakterli said:
This is the GCam I am using.
https://forum.xda-developers.com/mi-a2/how-to/gcam-pixel-3-v6-1-mi-a2-android-pie-t3870179
Try it and let me know the audio bitrate.
Click to expand...
Click to collapse
Oh sorry I meant share the files where you made the bitrate edits, I already have the same gcam app.
lukezainn said:
Oh sorry I meant share the files where you made the bitrate edits, I already have the same gcam app.
Click to expand...
Click to collapse
Here.
onbeskarakterli said:
Here.
Click to expand...
Click to collapse
Still doesn't work
What about the other media profiles files? What are they used for?
I assume the other profiles are for the different headphones and audio effects under settings>sounds>advanced. Correct me if I'm wrong
lukezainn said:
Still doesn't work
What about the other media profiles files? What are they used for?
Click to expand...
Click to collapse
Sent from my Mi A2 using Tapatalk
Sp_Ark said:
I assume the other profiles are for the different headphones and audio effects under settings>sounds>advanced. Correct me if I'm wrong
Click to expand...
Click to collapse
Hmm, I doubt it, these files include audio and video bitrate options when recording video
lukezainn said:
Still doesn't work
What about the other media profiles files? What are they used for?
Click to expand...
Click to collapse
The mod does work through. Check out your /system/vendor/etc/media_profiles file when the module is active.
onbeskarakterli said:
The mod does work through. Check out your /system/vendor/etc/media_profiles file when the module is active.
Click to expand...
Click to collapse
Yes the file is changed and it's set to 288000 now, but the audio quality in the videos are still horrible. I tried gcam, opencam, nothing works. I'm on pie 10.0.1
If anyone is interested, the screen record from the Oneplus 7 Pro does work on the 6T.
You can download it here . Thanks go out to @acervenky for uploading it!
Screenshot of it: https://imgur.com/jLSavbB
Recording of it working: https://imgur.com/GPwlAvT
Enjoy!
Nice. This is the most clean screen recorder I've ever used.
Just did a little test - works great!
You can't hear audio when it records internal audio.
Noob_Master said:
You can't hear audio when it records internal audio.
Click to expand...
Click to collapse
Working properly for me
cultofluna said:
Working properly for me
Click to expand...
Click to collapse
I meant to say that i can't hear the app's audio in my speaker or headphone when I'm using screen recorder. Can you hear the audio in your speaker when you're recording the screen?
Noob_Master said:
I meant to say that i can't hear the app's audio in my speaker or headphone when I'm using screen recorder. Can you hear the audio in your speaker when you're recording the screen?
Click to expand...
Click to collapse
Wich audio you mean exactly ...
If I'm listening music during recording , when i play back the video recording i can just just listen the music back
Noob_Master said:
I meant to say that i can't hear the app's audio in my speaker or headphone when I'm using screen recorder. Can you hear the audio in your speaker when you're recording the screen?
Click to expand...
Click to collapse
Have you checked this?
cultofluna said:
Have you checked this?
Click to expand...
Click to collapse
Yes. When i select internal audio... I can't listen to anything when screen recorder capturing my screen.
I cannot find it on the pulldown menu. Do I have to enable it anywhere? Thanks
Sent from my ONEPLUS 6T using Tapatalk
ma678 said:
I cannot find it on the pulldown menu. Do I have to enable it anywhere? Thanks
Sent from my ONEPLUS 6T using Tapatalk
Click to expand...
Click to collapse
Click the edit (pencil icon) button and add Screen Recorder tile frome there
Noob_Master said:
Yes. When i select internal audio... I can't listen to anything when screen recorder capturing my screen.
Click to expand...
Click to collapse
Increase the volume and use viper
This only works on oxygen os? I have a custom rom....
using viper4a don't fix the issue with no sound output while record internal audio.
iam using latest stable btw not beta build rom.
If anyone have a solution for this problem it will be appreciate
Thanks for sharing. The screen recorder has been added to OnePlus 6T in the latest OOS 9.0.15 update!