Related
Hello,
I am not be able to use the theme after I unlock and relock BL.
I can't flash cust and userdata: update_data_full_hw_meafnaf.zip
Tried to add it to Dload but it is not detected
Please help
Here's how I fixed it (YMMV). http://forum.xda-developers.com/p9/help/stock-rom-download-t3378806/post66873456#post66873456
I have exactly the same issue from a relock and a lock on EU version.
engineer000 said:
Hello,
I am not be able to use the theme after I unlock and relock BL.
I can't flash cust and userdata: update_data_full_hw_meafnaf.zip
Tried to add it to Dload but it is not detected
Please help
Click to expand...
Click to collapse
easy to use SRK Tool to flash it back
-unlock bootloader
-flash twrp
-flash super su
-use SRK tools to flash theme
-flash update.app if you need to revert recovery or unroot, force update.app if to relockbootloader
itongx said:
easy to use SRK Tool to flash it back
-unlock bootloader
-flash twrp
-flash super su
-use SRK tools to flash theme
-flash update.app if you need to revert recovery or unroot, force update.app if to relockbootloader
Click to expand...
Click to collapse
Thank you. Here's what I did.
When I see the message saying you need decryption key, I tried to unlock again the bootloader. It does factory reset afterwards.
I forced flash update.app, relock bootloader and I got an issue with themes.
To fix that, I unlocked bootloader and flash TWRP. I flashed the data zip bundled on the firmware. Flashed again the stock recovery and update.app
Relock again the bootloader and it did a factory reset again
after that, its all stock
Thanks guys
engineer000 said:
Thank you. Here's what I did.
When I see the message saying you need decryption key, I tried to unlock again the bootloader. It does factory reset afterwards.
I forced flash update.app, relock bootloader and I got an issue with themes.
To fix that, I unlocked bootloader and flash TWRP. I flashed the data zip bundled on the firmware. Flashed again the stock recovery and update.app
Relock again the bootloader and it did a factory reset again
after that, its all stock
Thanks guys
Click to expand...
Click to collapse
I have done same method but I facing update failed after flash update.app did you put then force update ?
itongx said:
I have done same method but I facing update failed after flash update.app did you put then force update ?
Click to expand...
Click to collapse
I only do a force update. Used TWRP to flash the 2nd datafile that have the theme.
Hello to all. here I have a small worries. I have installed the 1st time flight Android no / emui 5.0 not finalize on my p9, i've had the right to many crashes and losses autonomy. then I lead to the shop Huawei to put the b166 this walk ... However, since i've more themes default p9, i've more magazine. and when j'applique another theme this does not work ... if someone that's help m'its would be nice.
edit: I have been able to install the version c432b170 but nothing make no change.
engineer000 said:
Thank you. Here's what I did.
When I see the message saying you need decryption key, I tried to unlock again the bootloader. It does factory reset afterwards.
I forced flash update.app, relock bootloader and I got an issue with themes.
To fix that, I unlocked bootloader and flash TWRP. I flashed the data zip bundled on the firmware. Flashed again the stock recovery and update.app
Relock again the bootloader and it did a factory reset again
after that, its all stock
Thanks guys
Click to expand...
Click to collapse
Hi, can you please provide further explanation? Which data file is that? How do i flash it? I just sold my p9 and forgot about this theme issue coz i was using nova (while i manage to get the BL Code from Huawei). Now the owner is upset, please help.
ravefolk said:
Hi, can you please provide further explanation? Which data file is that? How do i flash it? I just sold my p9 and forgot about this theme issue coz i was using nova (while i manage to get the BL Code from Huawei). Now the owner is upset, please help.
Click to expand...
Click to collapse
You need to find the zip file update_data_full_hw_meafnaf.zip and flash it on TWRP. it may varies per model and I forget where I downloaded. What version you have? L09 or L19?
engineer000 said:
You need to find the zip file update_data_full_hw_meafnaf.zip and flash it on TWRP. it may varies per model and I forget where I downloaded. What version you have? L09 or L19?
Click to expand...
Click to collapse
Mine is L09, and TWRP is not booting, stuck ate splashscreen, any ideas?
UPADTE: TWRP ISSUE SOLVED
ravefolk said:
Mine is L09, and TWRP is not booting, stuck ate splashscreen, any ideas?
UPADTE: TWRP ISSUE SOLVED
Click to expand...
Click to collapse
how about repairing from the PC app from huawei like a PC Suite? Flashrom from TWRP? or forced flashing the zip file. find more on the forums. I already left p9 months ako. im using op3 now
engineer000 said:
You need to find the zip file update_data_full_hw_meafnaf.zip and flash it on TWRP. it may varies per model and I forget where I downloaded. What version you have? L09 or L19?
Click to expand...
Click to collapse
Same problem here my model is L19 where can I download update_data_full_hw_meafnaf.zip ?
Thanks
khampasith said:
Same problem here my model is L19 where can I download update_data_full_hw_meafnaf.zip ?
Thanks
Click to expand...
Click to collapse
check the following links:
http://consumer.huawei.com/pk/support/products/downloads/detail/huawei-p9-pk.htm?id=91684
Seems like i got it here: http://huaweidevices.ru/category/huawei-p9-eva-l19
Sorry. Can't remember exactly.
engineer000 said:
check the following links:
http://consumer.huawei.com/pk/support/products/downloads/detail/huawei-p9-pk.htm?id=91684
Seems like i got it here: http://huaweidevices.ru/category/huawei-p9-eva-l19
Sorry. Can't remember exactly.
Click to expand...
Click to collapse
Which one should i download ? The link contain several ones
I have the same problem as well. Hope someone can share clear instruction on how to solve the problem. Thanks
itongx said:
easy to use SRK Tool to flash it back
-unlock bootloader
-flash twrp
-flash super su
-use SRK tools to flash theme
-flash update.app if you need to revert recovery or unroot, force update.app if to relockbootloader
Click to expand...
Click to collapse
Thanks a lot Man ! that worked For me and everything is working even Magazine Unlock ! :laugh:
Just Download SRK tool and Follow itongx instructions ....
masoudshojaei20 said:
Thanks a lot Man ! that worked For me and everything is working even Magazine Unlock ! :laugh:
Just Download SRK tool and Follow itongx instructions ....
Click to expand...
Click to collapse
Hi can you elaborate or explain what it means by use the SRK tool to flash themes?
I'm browsing thru the tool interface and I cant find this option.
FYI My phone is not yet unlock BL / Root / connected to PC. I;m just preparing.
lee82gx said:
Hi can you elaborate or explain what it means by use the SRK tool to flash themes?
I'm browsing thru the tool interface and I cant find this option.
FYI My phone is not yet unlock BL / Root / connected to PC. I;m just preparing.
Click to expand...
Click to collapse
Hi....
First you choose Utility in SRK Tools and then choose "install /data/hw_init", on your phone you should accept supersu request and Done!
this is my solution ( made by me ) after trying many solutions over this forum @ other forums
just
1- delete any folder for themes u made (as hw_init or themes in root folder or at any site )
2- make folder & name it ( HWTHemes ) in internal memory
3- download this folder & put it inside (HWTHemes )
4- go to themes app and chose ** Aqua theme ** & apply it
5- no need to change any permissions
this was try on huawei y 7 2017
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
I have the same problem but with a different firmware.. now only thing i can do is use dc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
MobileTechArena said:
I have the same problem but with a different firmware. now only thing i can do is usedc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
Click to expand...
Click to collapse
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
barnabaXXX said:
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
Click to expand...
Click to collapse
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Thanks for making it clear. Please tell me if it worked or not. Thanks.
barnabaXXX said:
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
Click to expand...
Click to collapse
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
barnabaXXX said:
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
Click to expand...
Click to collapse
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
barnabaXXX said:
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
Click to expand...
Click to collapse
Unfortunately I can't help you further than what I already posted.
But keep updating in case someone more knowledgeable peeks in.
similar problem....I was fairly good but play store was stuck in pending download....
I did a wipe in TWRP, and ended with a black screen...
I can boot to eRecovery, but it fails.and also to TWRP.
when attached to PC it keeps being seen and unseen as if its stuck in a power on cycle
Any help would be greatly appreciated.
Already Tested
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Hello did you already test ???
Here is the solution for every PRA-LX1: [http : // www . htcmania . com / showthread . php ? t=1326478] (sorry for the spaces, but I don't have enough posts written to post external links )
Unfortunately, it's from a spanish forum. I didn't found any problem to follow this tutorial, but maybe for someone it could be a little difficult.
Anyway, it works!
MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Where did you find the C432 firmware? I can't succees to find it
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Iocere said:
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Click to expand...
Click to collapse
Yeah, that's the way! It worked for me too!
juanmemo said:
Yeah, that's the way! It worked for me too!
Click to expand...
Click to collapse
Also i noticed everytime a OTA fails you get the full version offered on next boot. So you should get a full B164 aswell after it failed
JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
how can you boot into recovery ? i can only boot into twrp or fastboot & rescue or if i plug the huawei to the pc erecovery ???
---------- Post added at 12:16 AM ---------- Previous post was at 12:13 AM ----------
i have an huawei pra-lx1 c530 it used to boot into pra-lx1c530b111 rooted and twrp but now it doens't boot anymore, i'd like to flash to c530b160 but i can't find the firmware images
tiagoggama said:
Hello did you already test ???
Click to expand...
Click to collapse
Thanks men
I CONFIRM IT WORK PERFECTLY
For the second part go to this link for more detail :
https://boycracked.com/2016/03/14/h...-unbrick-firmware-any-huawei-android-devices/
Hi!
I see the large number of requests concerning the roolback of a custom rom to a official and untouched EMUI 4, i decide to create this thread.
After follow that methode, you able to rest on official EMUI and get the new update automatically on OTA (directly on your phone) OR try to install custom rom with a clear and good base version.
1. You ave access on TWRP?
-If not, pleas unlock your bootloader (again) and flash TWRP recovery for you actual version (marshmallow or nougat).
-perform a full wipe and restore your partitions on "ext4" format, shutdown phone.
2. Get a "oem_info.zip" for your model phone (dont extract the .zip) and push it on your internal or external sd.
-This archive contain cust and oem info for patched your phone at the correct manufacture information.
-I have a link for VNS-L31 (c432, but is not very important) HERE LINK
-If you have other model (VNS-L31) pleas find a correct patch for you (VNS-L21, ...).
3. Find and download a EMUI marshmallow official full-ota update.
-for a VNS-L31 i advice choice a VNS-L31C432B160 full-ota update.
4. Unpack your update archive.
5. Create "dload" folder on your internal or external sd and put it UPDATE.APP
6. Reboot phone on TWRP recovery and flash "oem_info.zip"
7. Use dload methode for update (hold 3 buttons phone and dont release before "dload screen" appears)
8. Unlock your bootloader again (important!) And make a factory reset
9. Your phone reboot (please wait ) and done!
Ok now you are on official version, please update on setting menu >> update and choice, rest on official or flash a custom rom..
P9 lite brick precision:
In my personal experience the "p9 lite" is very easy to flash, mod or other tips and the risk of HARD brick is very very tiny.
If you see this page and your phone bootloop, relax, keep calm at 99,999% you have a little and ridiculous brick
Good luck and flash happy!
hi! i'm on 381, on my phone i have root, twrp and elite kernel...this guide is good for me???why after dload method i have to re-unlock my bootloader??
thank you and sorry for my english XD
macao1989 said:
hi! i'm on 381, on my phone i have root, twrp and elite kernel...this guide is good for me???why after dload method i have to re-unlock my bootloader??
thank you and sorry for my english XD
Click to expand...
Click to collapse
Yes, is good for you.
Not necessary to re-unlock bootloader.
Therand said:
Hi!
I see the large number of requests concerning the roolback of a custom rom to a official and untouched EMUI 4, i decide to create this thread.
After follow that methode, you able to rest on official EMUI and get the new update automatically on OTA (directly on your phone) OR try to install custom rom with a clear and good base version.
1. You ave access on TWRP?
-If not, pleas unlock your bootloader (again) and flash TWRP recovery for you actual version (marshmallow or nougat).
-perform a full wipe and restore your partitions on "ext4" format, shutdown phone.
2. Get a "oem_info.zip" for your model phone (dont extract the .zip) and push it on your internal or external sd.
-This archive contain cust and oem info for patched your phone at the correct manufacture information.
-I have a link for VNS-L31 (c432, but is not very important) HERE LINK
-If you have other model (VNS-L31) pleas find a correct patch for you (VNS-L21, ...).
3. Find and download a EMUI marshmallow official full-ota update.
-for a VNS-L31 i advice choice a VNS-L31C432B160 full-ota update.
4. Unpack your update archive.
5. Create "dload" folder on your internal or external sd and put it UPDATE.APP
6. Reboot phone on TWRP recovery and flash "oem_info.zip"
Click to expand...
Click to collapse
I can do everything up to point 6... won't enter to twrp... stays on Your device is now booting...
Update: I can now reach point 7 but now won't do dload (3 buttons) method... Huawei logo all the time. Can't even turn off the phone
In my other thread you post the same problem but is not entirely the same..
You succeeded to enter on fastboot mode? Flash recovery?
If you follow the steps 1-5 is impossible to fail the 6 point..
You have acces on fastboot mode or not?..
Therand said:
In my other thread you post the same problem but is not entirely the same..
You succeeded to enter on fastboot mode? Flash recovery?
If you follow the steps 1-5 is impossible to fail the 6 point..
You have acces on fastboot mode or not?..
Click to expand...
Click to collapse
I did update the post... 3 hours ago I wasn't able to enter TWRP, some way I did managed, now I can enter fastboot, I did flash custOEM (sorry I don't remember exactly the name but it's the one of your post) .zip file. Now I can't do dload method, stuck on huawei logo. If I try to go to recovery, I got red message "phone fail validation"...
I know, I post on both but I was trying to do everything...
just tried... validation red error message won't let me go to TWRP now...
You have a VNS-L31C432?
Your phone does not enter at dload mode?
Wipe all partitions an retry flash a oeminfo for your model phone (if not C432 you need right oeminfo).
Therand said:
You have a VNS-L31C432?
Your phone does not enter at dload mode?
Wipe all partitions an retry flash a oeminfo for your model phone (if not C432 you need right oeminfo).
Click to expand...
Click to collapse
How can I wipe all partitions if stuck in Huawei logo? Is there a way to do everything from adb command line? (I'm using Mac and cannot use all the tools I've found here XDA neither hiSuite which is basically a backup photo/video only the Mac version).
Thank for helping, really appreciate
To answer your question in the other thread, yes bootloader is unlocked and I am on C432.
What's your rom have before the bootloop?
You have the right version of TWRP for your rom?
If you have a MM version Don't flash a TWRP for N.
Send me a link to TWRP version used (thread forum)
Therand said:
What's your rom have before the bootloop?
You have the right version of TWRP for your rom?
If you have a MM version Don't flash a TWRP for N.
Send me a link to TWRP version used (thread forum)
Click to expand...
Click to collapse
Before the bootloop I was on L31C900 (on the phone) but I did actually flashed C432B160 because I did rollback. TWRP used I've found in the other post where there's a OEMfile to flash (but for this I need to double check because I did look so many pages which I am not 100% sure.
I not have experience on other model that C435.
But i suggest to find a oeminfo for your variant (C900?)
For TWRP you need flash a version for MarshMallow HERE
Flash it and pas return here (fastboot flash return and first enter to new recovery)
Hi, found Windows emulator for MacOs so I extract from update.app boot.img and flash.
I did format all partitions as told using a proper twrp this time.
What's next step, system says NO OS INSTALLED?
islandman75 said:
Hi, found Windows emulator for MacOs so I extract from update.app boot.img and flash.
I did format all partitions as told using a proper twrp this time.
What's next step, system says NO OS INSTALLED?
Click to expand...
Click to collapse
Flash partitions on .img files is not needed.
Just find a corect oeminfo for your model phone.
Flash it on TWRP recovery.
Use dload methode to update on basical version (MarshMallow b160).
After that, unlock bootloader again and make a factory reset.
Switch on your phone (the first boot make long time).
Update on last emui on OTA.
Done!
After that you able to install a custom rom.
Therand said:
Flash partitions on .img files is not needed.
Just find a corect oeminfo for your model phone.
Flash it on TWRP recovery.
Use dload methode to update on basical version (MarshMallow b160).
After that, unlock bootloader again and make a factory reset.
Switch on your phone (the first boot make long time).
Update on last emui on OTA.
Done!
After that you able to install a custom rom.
Click to expand...
Click to collapse
Done!
Thanks again you're saving my life!
IT won't turn off so been always on it won't keep the charge... Writing so because apparently it won't go to download mode (dload) if plugged in. On the other way if I unplugged from power it won't even start. Shall I force to download mode using console ADB or FASTBOOT? I had looked but can't find anything...
islandman75 said:
Done!
Thanks again you're saving my life!
IT won't turn off so been always on it won't keep the charge... Writing so because apparently it won't go to download mode (dload) if plugged in. On the other way if I unplugged from power it won't even start. Shall I force to download mode using console ADB or FASTBOOT? I had looked but can't find anything...
Click to expand...
Click to collapse
I not understand.
You not able to switch on your phone without connected charger?
Therand said:
I not understand.
You not able to switch on your phone without connected charger?
Click to expand...
Click to collapse
Correct. Because I'm not able to switch it off it won't keep the charge. When discharged, the minute I do plug on charge it wakes up... That's the loop...
My main question is: does a command exist to enter download mode using terminal?
islandman75 said:
Correct. Because I'm not able to switch it off it won't keep the charge. When discharged, the minute I do plug on charge it wakes up... That's the loop...
My main question is: does a command exist to enter download mode using terminal?
Click to expand...
Click to collapse
You have a hardware bug?
No abd command to enter dload mode..
Try flash a update.zip with twrp (not guaranted)
After that unlock bootloader again and make factory reset.
Therand said:
You have a hardware bug?
No abd command to enter dload mode..
Try flash a update.zip with twrp (not guaranted)
After that unlock bootloader again and make factory reset.
Click to expand...
Click to collapse
I'll try. Thank you
Hi, I followed this guide to go back to stock from elite rom. I flashed my oeminfo.img on twrp and then went to dload combination. Do I have to unlock the bootloader after the reboot? Thanks!
Hi,
I followed your guide and it works perfectly thanks!
Hi, I'm in a bad situation. My honor 9 lite (Europe) has no OS, frp lock. But it does have TWRP installed.
My question would be, since I can't flash an OS (given the frp lock) via fastboot, would it work via TWRP? Or should I just give up and buy a new phone?
Thanks a lot.
Best
Since you have TWRP, try using HURUpdater tool. It is compatible with H9L.
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
BS4388 said:
Since you have TWRP, try using HURUpdater tool. It is compatible with H9L.
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Click to expand...
Click to collapse
Hi,
thanks a lot for the tip. Unfortunately, I keep getting an error when flashing following the instructions.
I discovered that nonetheless I can flash roms with TWRP. There is one particular rom, this one https://forum.xda-developers.com/honor-view-10/development/rom-t3753555 that works particularly.
However, my device with that rom keeps giving me an error "bluetooth keeps stopping". Any way to solve that?
I really don't know a solution.
Can't you enable OEM unlock in settings/developer options? so that to make frp unlocked?
Yes.
After that, I was able to finally flash stock rom
However, there's a new issue: wifi doesn't work. It actually seems like whatever rom I flash, wifi won't work the slider turns off as soon as I turn it on
Did you wipe data/factory reset through eRecovery after flashing? That is important in most cases!
BS4388 said:
Did you wipe data/factory reset through eRecovery after flashing? That is important in most cases!
Click to expand...
Click to collapse
No I did not. I think I used TWRP to do that. Will do with eRecovery next time and update you
I am still without WiFi.
I think the problem lies in the fact that my stock ROM comes from here: https://forum.xda-developers.com/9-lite/how-to/guide-unbrick-device-recover-bootloop-t3772563
I had oreo 8.1 before brick, and the rim above that I flashed is 8.0 and Indian version (not european). That maybe could explain the issue.
Problem is, I would need a system.img stock ROM to file and I can't seems to find that. In Huawei firmware finder, I only get update.zip kind of files and TRWP returns error when flashing that or when I use the HuRUpdater tool.
Also, I've noticed it's not just the WiFi, but also security options and themes for some reason
you need a working frp image which in twrp can flashed via dd... so the frp lock is gone...
In telegram group you can find image.
gabfur01 said:
I am still without WiFi.
I think the problem lies in the fact that my stock ROM comes from here: https://forum.xda-developers.com/9-lite/how-to/guide-unbrick-device-recover-bootloop-t3772563
I had oreo 8.1 before brick, and the rim above that I flashed is 8.0 and Indian version (not european). That maybe could explain the issue.
Problem is, I would need a system.img stock ROM to file and I can't seems to find that. In Huawei firmware finder, I only get update.zip kind of files and TRWP returns error when flashing that or when I use the HuRUpdater tool.
Also, I've noticed it's not just the WiFi, but also security options and themes for some reason
Click to expand...
Click to collapse
The system.app file you search for is in the update.zip file you get and you cannot flash update.zip directly from twrp, you need HuRupdater for that and the dload method doesn't work for almost anyone including me.
And you need correct the firmware for your motherboard if you want your phone to work properly.
First tick oem unlocking in developer options. Then unlock fastboot and flash TWRP.
Since you are able to boot up check your varient, the complete one not just the LLD but the rest too. Search for it in Huawei firmware finder and download the latest firmware for your model. You'll get 3 links and you'll need all three.
Download HuRupdater 0.3 zip and then rename the 3 files you got as told in the HuRu instructions. get twrp image and rename it to recovery.img and put all files in the same folder.If you want to completely revert to stock you don't have to have recovery.img but keep it just in case.
Then flash HuRupdater using twrp. You should be up and running if you did everything right.
You can then remove the recovery.img and then flash again using HuRupdater and relock the fastboot too later if you wanna play things safe using fastboot relock bootloader 'your code' .
please help me, honor 9 lite last night my flash rom forgot the data format so now can not boot into the operating system, locked FRP, can not enter the TWRP.
Hello, I know it's been a long time. I put the issue aside for a few months as I had another phone to use in the meanwhile just wanted to let you know i Just did the procedure you described and it worked perfectly! The phone is back to life :laugh:
Hello,
I was trying to install a custom ROM from TWRP to my P8 Lite 2017 and I wiped all partitions except MicroSD.
The installation failed and I got the stock ROM and then I discovered that my bootloader is locked. I can access TWRP and when I flashed the stock ROM the phone just boots to TWRP Recovery. And I can't even unlock the bootloader because the phone doesn‘t have any OS and I can‘t enable OEM unlocking from the system settings. And because I have TWRP, I can’t access Huawei Recovery. So my phone is basically bricked.
Any help will be appreciated
luigifan3 said:
Hello,
I was trying to install a custom ROM from TWRP to my P8 Lite 2017 and I wiped all partitions except MicroSD.
The installation failed and I got the stock ROM and then I discovered that my bootloader is locked. I can access TWRP and when I flashed the stock ROM the phone just boots to TWRP Recovery. And I can't even unlock the bootloader because the phone doesn‘t have any OS and I can‘t enable OEM unlocking from the system settings. And because I have TWRP, I can’t access Huawei Recovery. So my phone is basically bricked.
Any help will be appreciated
Click to expand...
Click to collapse
Use dload with a service firmware.
You need to flash this 2 times,once for the firmware and second time for vendor,and the firmware UPDATE.APP can be found in the update_sd.zip and the vendor UPDATE.APP can be found in the PRA-L31 or PRA-L11 folders (most likely you will have PRA-L31,you can find this in the engineering menu by going into the dialer and typing this: *#*#2846579#*#*,and then going to Veneer Informations and Version Info,but since you cannot boot flash PRA-L31 vendor).
http://androidhost.ru/6uc - this is latest firmware,but takes a very very long time to download
https://mega.nz/#F!nwhAWDjC!cNovAN6dKLlO_YZ9fjMbzQ - this is the first official firmware released,but download speed is very good
If you don't know how to use dload you can look it up on forums.
If your phone is really hard bricked and can't do anything, check this out:
I know how to use dload, but how I can boot into dload mode with TWRP installed and bootloader locked?
luigifan3 said:
I know how to use dload, but how I can boot into dload mode with TWRP installed and bootloader locked?
Click to expand...
Click to collapse
Dload works no matter what,at least I was able to enter it when I bricked my phone,even when I completely screwed up my recovery partition,so you should be good. Try using it with the service firmware I left you.
dinoderda said:
Dload works no matter what,at least I was able to enter it when I bricked my phone,even when I completely screwed up my recovery partition,so you should be good. Try using it with the service firmware I left you.
Click to expand...
Click to collapse
Now I have downloaded the service firmware so how I am going to flash it now? Like do I extract the UPDATE.APP and flash it in TWRP or what? You said that flash UPDATE.APP, but am I going to do that in dload mode or TWRP?
luigifan3 said:
Now I have downloaded the service firmware so how I am going to flash it now? Like do I extract the UPDATE.APP and flash it in TWRP or what? You said that flash UPDATE.APP, but am I going to do that in dload mode or TWRP?
Click to expand...
Click to collapse
In dload,make sure you make a folder in the root of your sdcard called dload and put that in there.
dinoderda said:
In dload,make sure you make a folder in the root of your sdcard called dload and put that in there.
Click to expand...
Click to collapse
Now I have the UPDATE.APP in my dload folder, but how I boot to the dload mode now?
luigifan3 said:
Now I have the UPDATE.APP in my dload folder, but how I boot to the dload mode now?
Click to expand...
Click to collapse
Volume Up + Volume Down + Power Button.
dinoderda said:
Volume Up + Volume Down + Power Button.
Click to expand...
Click to collapse
I tried that, it just boots into TWRP
EDIT: I got to dload, but it says software installation failed
luigifan3 said:
I tried that, it just boots into TWRP
EDIT: I got to dload, but it says software installation failed
Click to expand...
Click to collapse
Hm,make sure you used the service firmware I left you,but if you are sure you did,your last resort is DC Phoenix which you will need to pay 20 euros.
luigifan3 said:
Hello,
I was trying to install a custom ROM from TWRP to my P8 Lite 2017 and I wiped all partitions except MicroSD.
The installation failed and I got the stock ROM and then I discovered that my bootloader is locked. I can access TWRP and when I flashed the stock ROM the phone just boots to TWRP Recovery. And I can't even unlock the bootloader because the phone doesn‘t have any OS and I can‘t enable OEM unlocking from the system settings. And because I have TWRP, I can’t access Huawei Recovery. So my phone is basically bricked.
Any help will be appreciated
Click to expand...
Click to collapse
if you have TWRP installed could you make a backup of your oeminfo partition so we could provide you the right firmware to recover your device
RAR1991 said:
if you have TWRP installed could you make a backup of your oeminfo partition so we could provide you the right firmware to recover your device
Click to expand...
Click to collapse
Ok, but does it provide the right info if I have flashed different oeminfo.img?
dinoderda said:
Hm,make sure you used the service firmware I left you,but if you are sure you did,your last resort is DC Phoenix which you will need to pay 20 euros.
Click to expand...
Click to collapse
I've tried a different firmware for my device and now I can't get to dload anymore so does it mean that I've chosen the wrong firmware? And by the way I read somewhere that if the dload says error it can depend on the microsd card.
I tried it again with the service firmware and I got to dload and it didn't have error anymore and now I've got everything worked and my phone is unbricked
luigifan3 said:
I tried it again with the service firmware and I got to dload and it didn't have error anymore and now I've got everything worked and my phone is unbricked
Click to expand...
Click to collapse
great
I was stuck with a similar problem. Device bricked and flashing TWRP and restoring backups, then stock recovery and stock roms, but nothing worked until I found this post. Thanks a lot dinoderda for your help.
dinoderda said:
Use dload with a service firmware.
You need to flash this 2 times,once for the firmware and second time for vendor,and the firmware UPDATE.APP can be found in the update_sd.zip and the vendor UPDATE.APP can be found in the PRA-L31 or PRA-L11 folders (most likely you will have PRA-L31,you can find this in the engineering menu by going into the dialer and typing this: *#*#2846579#*#*,and then going to Veneer Informations and Version Info,but since you cannot boot flash PRA-L31 vendor).
http://androidhost.ru/6uc - this is latest firmware,but takes a very very long time to download
https://mega.nz/#F!nwhAWDjC!cNovAN6dKLlO_YZ9fjMbzQ - this is the first official firmware released,but download speed is very good
If you don't know how to use dload you can look it up on forums.
Click to expand...
Click to collapse
Hello again, I've been using the older service firmware for few months now and now I decided to install the latest service firmware after I had no success with flashing the firmware through TWRP and I downloaded the service firmware put the necessary files to the dload folder and installed it via the software update in the dialer and typing *#*#2846579#*#* and going to dload that way. It installed to 100% and then when it restarted it goes to Error Mode and it says to update the firmware again but it just loops to error mode and I cannot do anything so I think I accidentally removed some neccessary files in the dload folder but now I would need to fix the error mode loop.