Related
Hey Guys,
The front of my diamond is in pretty bad condition. Well it looks fine when you glance on it but on further inspection there are many scratches on the screen including a big one in the top right hand corner. I have noticed that there seems to be a thin glass panel over the actual screen, Is it possible to get this replaced with a panel which is scratch free?
Furthermore, my speaker is buggered. My mate read some article on the internet saying that if you smear your phone with toothpaste then it removes scratches. Unfortunately he decided to try it. The toothpaste has got into the ditch where the speaker is and it's clearly blocked up. I can just about hear the phone when I am indoors and there is no noise but when outdoors I cannot hear a thing. It was a bit too quiet for my liking before anyway. Where can I get the speaker replaced preferably with a louder speaker?
I'm new to repairing phones as I usually just buy a new one if something goes wrong but I like my diamond
Any Suggestions?
Too bad for the toothpaste there are polishing fluids for sale which seem to work, although i wouldn't try it. Seems to mee you could ask HTC if you're really interested in spare parts ?
To all people who have this problem! I recently got the Nexus 7 3G and the back was creaking so badly you could easily hear it across a large room. The noise seemed to come from the "nexus" logo near the top of the device.
I found the culprit an double checked with an older 16GB model. They changed the design of golden contact springs for the wireless radios from a simple C shape design to some complicated folding Z shaped spring design. It is those springs that upon being depressed rub metal on metal and make this horrible creaking noise. I don't know how many 3G's are affected but mine definitely was.
My solution was to open it up, which is easy enough to do with a guitar pick or something similar, just check YouTube, and to bend the springs until they stopped making noises under load.
While I was in there I also added double sided tape wherever necessary to stop the plastic from creaking (because they left out a lot of the foam they put in the older models, maybe to fix the screen lift issue??) and I re-wrapped the battery protection circuit because the circuit board was rubbing on the battery and making noises as well. (also, my battery was strangely wedged sideways in it's compartment)
All in all it's rock solid now, no creaks, nothing. And it feels like a really quality device now. Suffice to say that I should never have had to do this in the first place in order to own a device that is in satisfactory condition and one is not embarrassed to pass along in a group of friends because of the noises it makes
fabian.ecker said:
To all people who have this problem! I recently got the Nexus 7 3G and the back was creaking so badly you could easily hear it across a large room. The noise seemed to come from the "nexus" logo near the top of the device.
I found the culprit an double checked with an older 16GB model. They changed the design of golden contact springs for the wireless radios from a simple C shape design to some complicated folding Z shaped spring design. It is those springs that upon being depressed rub metal on metal and make this horrible creaking noise. I don't know how many 3G's are affected but mine definitely was.
My solution was to open it up, which is easy enough to do with a guitar pick or something similar, just check YouTube, and to bend the springs until they stopped making noises under load.
While I was in there I also added double sided tape wherever necessary to stop the plastic from creaking (because they left out a lot of the foam they put in the older models, maybe to fix the screen lift issue??) and I re-wrapped the battery protection circuit because the circuit board was rubbing on the battery and making noises as well. (also, my battery was strangely wedged sideways in it's compartment)
All in all it's rock solid now, no creaks, nothing. And it feels like a really quality device now. Suffice to say that I should never have had to do this in the first place in order to own a device that is in satisfactory condition and one is not embarrassed to pass along in a group of friends because of the noises it makes
Click to expand...
Click to collapse
Would u mind taking a picture of the inside where u added tape to stop the backplate from creaking and upload it. I've tried many things to fix it to no avail.
Sent from my Nexus 7 using Tapatalk 2
i will as soon as i find some time. there is another thread here on xda. it's for the wifi model but i adapted the suggestions for my nexus 7. also, what i did for mine might not work for yours. my suggestion is, figure out where the noise is coming from, add some double sided tape or foam close it partially and try it. took me about 2 days of trial and error to achieve an acceptable state
http://forum.xda-developers.com/showthread.php?t=1848013
here is the link
fabian.ecker said:
i will as soon as i find some time. there is another thread here on xda. it's for the wifi model but i adapted the suggestions for my nexus 7. also, what i did for mine might not work for yours. my suggestion is, figure out where the noise is coming from, add some double sided tape or foam close it partially and try it. took me about 2 days of trial and error to achieve an acceptable state
Click to expand...
Click to collapse
Thanks very much. My only creak is on the right side where the battery is and close to the bezel. Did u happen to have one there as well? Wish me luck lol off to void my warranty
Sent from my [insert phone model here]
fabian.ecker said:
To all people who have this problem! I recently got the Nexus 7 3G and the back was creaking so badly you could easily hear it across a large room. The noise seemed to come from the "nexus" logo near the top of the device.
I found the culprit an double checked with an older 16GB model. They changed the design of golden contact springs for the wireless radios from a simple C shape design to some complicated folding Z shaped spring design. It is those springs that upon being depressed rub metal on metal and make this horrible creaking noise. I don't know how many 3G's are affected but mine definitely was.
My solution was to open it up, which is easy enough to do with a guitar pick or something similar, just check YouTube, and to bend the springs until they stopped making noises under load.
While I was in there I also added double sided tape wherever necessary to stop the plastic from creaking (because they left out a lot of the foam they put in the older models, maybe to fix the screen lift issue??) and I re-wrapped the battery protection circuit because the circuit board was rubbing on the battery and making noises as well. (also, my battery was strangely wedged sideways in it's compartment)
All in all it's rock solid now, no creaks, nothing. And it feels like a really quality device now. Suffice to say that I should never have had to do this in the first place in order to own a device that is in satisfactory condition and one is not embarrassed to pass along in a group of friends because of the noises it makes
Click to expand...
Click to collapse
Bookmarking so I recognize your nick on an upcoming "My wifi doesn't work!" thread.
Don't worry about your warranty! there is a "seal" sticker INSIDE the case but popping the back off will most certainly not void your warranty. it's more like the battery cover on a galaxy s3 or a nexus s than anything else!
fyi i had it on the right, left, and top of the device
Ok so I have the silver HTC One and as much as I love it, I can't help but think the front would look bad-ass with the black speaker grills...
I was wondering if anyone has any experience replacing their speaker grills, I remember seeing a drop test video and it popped off. The guy in the video mentioned how it didn't clip back on, it was glued on.
I think if it was easy enough to get a stanley blade in between the grill and the plastic it could just pop off (mine has a gap so it could be quite easy) then it would also help in the future if any scratches happen, just to replace them again...
Thoughts?
thats a good idea, itll be great to know if the speaker grills are repleacable, as they are slightly raised on most phones
I'm just worried incase I order the replacment parts and they are not the same quality as the real HTC One parts. Is there a site that sells genuine parts? They would need to ship to the UK for me though...
Are you out of your mind?
If you are, I'd recommend sandpaper tape and some spray paint. That would probably be easier than disassembly. Maybe even some black nail polish.
Sent from my HTC One using xda premium
couped said:
Are you out of your mind?
If you are, I'd recommend sandpaper tape and some spray paint. That would probably be easier than disassembly. Maybe even some black nail polish.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
I dont think it will be as bad as you think, this is the video I was talking about:
http://youtu.be/KwE9PGDnlvs?t=1m51s
I know the top may be more difficult to get off because of the camera and I think I will wait a few more months to see if anyone does drop their One and the top part pops off... But it would be interesting to know because this could be useful to those who get any real bad damage to their speaker grills...
The speaker grills are glued to the housing, Removing them shouldn't be hard
Do it and get us some pics
I'm doing it. Are you sure about the glue? I also started a thread about it a couple of days ago.
robt772000 said:
I'm doing it. Are you sure about the glue? I also started a thread about it a couple of days ago.
Click to expand...
Click to collapse
The bottom one is definitely glued, I am not sure about the top one though
Im interested...
Barca009 said:
Ok so I have the silver HTC One and as much as I love it, I can't help but think the front would look bad-ass with the black speaker grills...
I was wondering if anyone has any experience replacing their speaker grills, I remember seeing a drop test video and it popped off. The guy in the video mentioned how it didn't clip back on, it was glued on.
I think if it was easy enough to get a stanley blade in between the grill and the plastic it could just pop off (mine has a gap so it could be quite easy) then it would also help in the future if any scratches happen, just to replace them again...
Thoughts?
Click to expand...
Click to collapse
I agree that the black would look pretty cool. Let us know how this turns out! and take pictures of the process. I myself am curious whats behind the top grill, my speaker on the top is starting to crackle horribly i want to know if it would be possible to replace.
One of mine (the bottom grill) has a small chip in it that really annoys me, so i have ordered a new set. Postage to the UK is quite expensive, but the total was only £24. Not that bad considering its an original part I guess.
Removing the grills shouldnt be too hard, just heat them up with a hot air gun, being careful not to 'cook' the phone and carefully prise the grill up. The gap most people have in the case may be a help here. The new one should just press on. Warm it up, press it down and hold it firmly until cool, with a clamp or strong bulldog clip if you can.
Etradesupply.com sells almost everything for HTC one just so everyone knows if they didn't, u also have a tiny chip in my lower speaker grill, but my case hides it for now so I'm not super worried, but I would love to know if this is possible!!
Sent from my HTC One using xda premium
The grills and the SIM tray are about the only things you can replace. They sell screens, but there is no realistic way to replace them. Even if you could open the phone without marking it, putting it back together is almost impossible.
rovex said:
One of mine (the bottom grill) has a small chip in it that really annoys me, so i have ordered a new set. Postage to the UK is quite expensive, but the total was only £24. Not that bad considering its an original part I guess.
Removing the grills shouldnt be too hard, just heat them up with a hot air gun, being careful not to 'cook' the phone and carefully prise the grill up. The gap most people have in the case may be a help here. The new one should just press on. Warm it up, press it down and hold it firmly until cool, with a clamp or strong bulldog clip if you can.
Click to expand...
Click to collapse
Just for clarification, did you order this from etrade supply? do you have it yet and how is the quality...?
Regards
Zak
Etradesupply quality is very good. I order parts from them and never have an issue.
Heat gun or hair dryer to loosen up the glue should help.
Sent from my HTC One using xda app-developers app
Curious to see if you went through with this.
Sent from my HTC One using xda premium
I bought some etrade silver speaker grills but no longer need them.
If possible please share the whole process heating , removing and fixing the top and bottom speaker grill. Thanks !
Sent from my HTC One using xda app-developers app
Just a tip, do not "paint" the grill. It's impossible to do without stuffing up the holes anyway.. And paint does not stick to aluminium.
You need to anodise aluminium.
Google how to do it but in a nutshell..
1) chemically clean existing aluminium to remove all traces of colour /surface protection. 2)Anodise it to required colour or clear colour
This not only gives you the look you want but makes the surface very hard.
Anodising also is not "on" the surface but part of it so it won't scratch off, block holes etc.
Bare aluminium is very soft and WILL oxidise and go dull. Apart from living in a vacuum or learning to breathe argon gas, you can't stop it.
Anodising MAKES aluminium oxidise and then fill the surface with a dye. This prevents further oxidisation.
Cheers, Marty
Sent from my HTC One using Tapatalk 4 Beta
any luck with replacing the speaker grills?
Just a heads up
I asked about this a different thread and one of the people that replied told me that only the bottom grill is glued in. He said the top is actually screwed in from the back before the back cover is put on. I cant confirm if he was correct, but still good info for anyone planning to try something like this. Can anyone confirm that has purchased these if there are threads in the top grill for it to be screw in?
The longer I'm having this phone, the more disillusioned I am becoming with it.
I sold my iPhone 5 in September and 'upgraded' to the Z1...
Yet despite needing initial time to get over the pathetic viewing angles, I developed a real fondness for the phone...
But that honeymoon period soon ended... Two weeks later the phone had proven that it was the biggest scratch magnet I ever owned. The perfectly hard wearing Dragontrail glass is covered by a super scratch prone ASF, the aluminium frame has lots of ugly scuff marks on it despite taking great care of the phone and only keeping it in a soft pocket - alone - and today the grille bubbled up and came off the speaker at the bottom.
By the way it is nothing but a piece of cut out mesh, fabric essentially, that has been glued down with what seems to have become really tacky glue. Clearly not water resistant as it's advertised.
I've put it back but it wouldn't stick. I really need to send it in for a warranty repair but I'm leaving Europe for 5 months on Monday so I can't!
So the Z1 is a poorly constructed phone made to appear as if it is of a premium build quality and Sony did not build it to look good in a month, or two or 12 down the line let alone two years.
Who in their right mind ok'd the ASF what a hideous idea?!
Anyway I digress, has anybody else's speaker grille come off or bubbled up?
Sent from my C6903 using xda app-developers app
Here it is... It's just a piece of plastic mesh and mine has now fallen off. Anybody with the same?
Sent from my C6903 using xda app-developers app
Another pic of the grille
Sent from my C6903 using xda app-developers app
Use superglue. The grill has nothing to do with the waterproofness.
It will still be under warranty when you get back. Send it then?
Sent from my C6903 using xda app-developers app
I can't superglue it back as it now has a kink in it... And just looks bad.
A warranty repair it is then when I come back. Thanks for the advice anyhow.
As long as my waterproofing is not affected I'm gonna live with it.
But yes I am fundamentally disappointed with some of the materials used to make this phone... and at the top of my list is the ASF with the logo baked in...
This is just yet another thing...
Sent from my C6903 using xda app-developers app
Didn't somebody's silver ring around the power button also just fall off? These things shouldn't happen...
Sent from my C6903 using xda app-developers app
My speaker grill just started pealing off. Noticed when it got caught on something.
Does this actually affect whether it's waterproof or not? I'm imagining not, as it's just a thin piece of plastic, either way I'll be more careful with the phone now.
Mine isn't under warranty because I've had it so long, and it's rooted too...
corydor13 said:
My speaker grill just started pealing off. Noticed when it got caught on something.
Does this actually affect whether it's waterproof or not? I'm imagining not, as it's just a thin piece of plastic, either way I'll be more careful with the phone now.
Mine isn't under warranty because I've had it so long, and it's rooted too...
Click to expand...
Click to collapse
@corydor13 @Johann_London
I've noticed today, that my speaker grill is a bit "wobbly" which means that if I put my finger on it I can move it a bit to the left and right and also up and down. I'm not sure if it was there from the beginning (I have the phone since September) but I doubt it. Is this "normal" or already considered a case for warranty?
I'm afraid now the grill might come off soon! I have a case on the phone and always have it alone in one pocket and handle it with care so that shouldn't be the cause.
What did you do? Sent it in under warranty?!
drsoran2 said:
@corydor13 @Johann_London
I've noticed today, that my speaker grill is a bit "wobbly" which means that if I put my finger on it I can move it a bit to the left and right and also up and down. I'm not sure if it was there from the beginning (I have the phone since September) but I doubt it. Is this "normal" or already considered a case for warranty?
I'm afraid now the grill might come off soon! I have a case on the phone and always have it alone in one pocket and handle it with care so that shouldn't be the cause.
What did you do? Sent it in under warranty?!
Click to expand...
Click to collapse
That's basically how the problem started for me.
After a while of trying to keep it on, I got annoyed with the fact that it kept falling off, so just left it off.
Haven't sent it back for repairs or anything as I don't see the point.
It's been soaked since and doesn't have any problems..(yet).
So it is still waterproof? But even if so, it's very disappointing that this happens after only 9 months and without the grill it looks ugly, like it was used for ten years.
I also have that strange, squeaky vibration motor sound. I can live with the former, but both defects combined are almost too much.
I'm going to talk with the Sony chat tomorrow and see what they'll say.
drsoran2 said:
I'm afraid now the grill might come off soon! I have a case on the phone and always have it alone in one pocket and handle it with care so that shouldn't be the cause.
What did you do? Sent it in under warranty?!
Click to expand...
Click to collapse
It's not a problem, they used a cheap glue to stick that grill under the phone and in time, hot temperatures and maybe water, the glue just lost his consistency. Try to keep it on or just apply some drop of good glue and do not close the speaker (LOL)
BTW, I can move mine too but until stay there I do not touch it.
I'm going to post this thing that happen to me yesterday I think I was the only one and I found this, yesterday I saw how my grille can move and I was like , I take great care of the phone, doesn't have scratches of any type, and now this.... I will try to remove it very very careful and apply some kind of glue I have, and see what happen
A little too late to this thread, but just posting my own experience. The little speaker mesh literally fell off of my Xperia Ray. After it comes off, you can not hear anything on the speaker phone when talking to someone and Music, although loud comes with very high frequencies. To fix this, you take black electrical tape, cut just a small part and stick it over the plastic, then use a clear plastic tape to cover that along the bottom. The sound is not like the original but still works better than no mesh. The in-Call volume of these phones is a major disappointment. You are right, the build quality of most android phones is junk. What the Android world needs badly is the iPhone build quality.
Well I'm back with some things to say, some friends I know seem that doesnt have this problem at all, weird, after some time I finally removed the grille it was just holded with strong by a very small side, I try glue that have a color like orange/brown (I dont remember the brand) it work ok but just for 2 weeks, after that it starts to move again, so now I try a Gel glue and it seems that work excellent, it doesn't move at all, with the other glue it holds, but it can move a little, seems that this glue is the solution, and it says in the boxx is water resistant so, better for me, I have to say that you have to ve very careful because a little drop in the mic and nobody will hear you again, the same for the speaker, so far I dont have problems :victory: so if you found a gel based glue in a little stick, try it if you have this problem
jacker60 said:
Well I'm back with some things to say, some friends I know seem that doesnt have this problem at all, weird, after some time I finally removed the grille it was just holded with strong by a very small side, I try glue that have a color like orange/brown (I dont remember the brand) it work ok but just for 2 weeks, after that it starts to move again, so now I try a Gel glue and it seems that work excellent, it doesn't move at all, with the other glue it holds, but it can move a little, seems that this glue is the solution, and it says in the boxx is water resistant so, better for me, I have to say that you have to ve very careful because a little drop in the mic and nobody will hear you again, the same for the speaker, so far I dont have problems :victory: so if you found a gel based glue in a little stick, try it if you have this problem
Click to expand...
Click to collapse
Hi
Does anyone know where I can buy this part (black botton cover)?
I have tried to find a place that sells it and I could not find one.
However, I replace the screen on my phone (Xperia Z1s C6916) about three months ago, and only ripped the flex cable connecting the audio jack and sensor. When I did that, I bought a screen that was already connected to a frame. However, I forgot to transfer the mesh covering the speaker. I did not know it was just a mesh piece on the outside until now... I took the phone apart, yet again, ripped the flex cable connecting the microphone... Why are parts for this thing so expensive!?
Johann_London said:
Anyway I digress, has anybody else's speaker grille come off or bubbled up?
Sent from my C6903 using xda app-developers app
Click to expand...
Click to collapse
Mine fell off a few months ago.
AkiraProject said:
Mine fell off a few months ago.
Click to expand...
Click to collapse
Mine fell off yesterday. I bought mine in September. I'm glad the water proofing hasn't been affected by it (going by others' accounts, I'm too chicken to try it myself.) I was really upset cause I bought it only for the waterproofing and the other features were a plus. I'll super glue it then. India is getting too hot, the glue melted off.
Yeah mine fell off too, it's been off for a while now.
My USB flap fell off too, though it was probably my own fault over using it without care. So I guess mine isn't waterproof any more ? :victory:
Hi to all,
Wanted to ask if someone has this case.
https://www.punkcase.com/collection...water-shock-dirt-snow-proof-lifetime-warranty
I ordered it ( 26 July) and still waiting.
How it looks, and if its comfortable to use it daily at office
Thanks
This thing looks amazing, I would also be interested in what it is like in real life. Does anyone have one to give a review?
thedavefitzy said:
This thing looks amazing, I would also be interested in what it is like in real life. Does anyone have one to give a review?
Click to expand...
Click to collapse
using it since last 10 days. experience is superlative. makes the device a bit bulky but solid protection. no scratch guard. the film on the case works flawlessly. best case ever used so far. got it from in.mobile fun.com
I found this one
But would like to hear more, from someone hier
Hier some comments :
vivek 8 said:
using it since last 10 days. experience is superlative. makes the device a bit bulky but solid protection. no scratch guard. the film on the case works flawlessly. best case ever used so far. got it from in.mobile fun.com
Click to expand...
Click to collapse
Thanks for the answer.
Any problem typing? And also i put my phone always front left pocket with jeans. Do you think i can continue do that with that case?
Thanks
Sakisgre said:
Thanks for the answer.
Any problem typing? And also i put my phone always front left pocket with jeans. Do you think i can continue do that with that case?
Thanks
Click to expand...
Click to collapse
no problems typing. very slick. case double thickness of phone. front is thin film. sharp knock on phone by edge of the table will crack the screen. but brilliant piece of engineering. love it.
Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.
s.lanso said:
Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.
Click to expand...
Click to collapse
Sorry but I will have to asked you one more time.... Does this case have any problem with touch response? I mean is working perfectly and doesn't infect touch sensitivity?
tsiglas said:
Sorry but I will have to asked you one more time.... Does this case have any problem with touch response? I mean is working perfectly and doesn't infect touch sensitivity?
Click to expand...
Click to collapse
No problem with sensitivity.
Sent from my SM-G935V using XDA-Developers mobile app
https://smile.amazon.com/s/ref=nb_s...mic+2.0,aps,196&rh=i:aps,k:ghostek+atomic+2.0
not many good reviews on Amazon regarding this brand and case. It does look awesome though.
s.lanso said:
Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.
Click to expand...
Click to collapse
May i ask how long did you wait for it?
I am in Berlin, Germany... And i order it on 26 July.
Thanks
Sakisgre said:
May i ask how long did you wait for it?
I am in Berlin, Germany... And i order it on 26 July.
Thanks
Click to expand...
Click to collapse
Ordered through mobilefun.com and took about 1 week when they had stock available.
Sent from my SM-G935V using XDA-Developers mobile app
Update:
As mentioned sensitivity wasn't a big problem or no problem I've seen.
But because its' a plastic screen I and because of my old TGSP didn't full extend to the end of the phone. I decided to get the Tzunami ProGlass from walmart. Installed it and put the case back on. Which should add extra protection on screen.
Even though responsiveness was good this seem to bump it up a bit more as it sticks more to the plastic and doesn't leave much. Plus you should not have a problem with it breaking as it just sits inside case.
Likely going to put the GPEL2 When I receive it but likely this might be my set up for my phone. The case looks nice and hope this is an improvement from their other cases.
UPDATE: Sensitivity issues as well from others with the ProGlass. So waiting on GPEL2.
2nd update of the case
I forgot to mention, this could be a pro or con depending if you use speaker a lot or not. I do listen at times but most of the times I use bluetooth headphones or speakers so no problem plus sound seems to be extended a bit more.
But the sound from the speaker is somewhat transferred and the back is used to transfer the sound out which would be why they use the type of material for the back. As if you see pictures of it the bottom you won't see a speaker cut out instead it's for the cord. So if you really depend on the sound from the speaker, the sound would be coming from the back of the phone instead of the side. You won't have to worry about covering it with your finger.
It does help when talking to someone on speaker phone, which is an advantage if you sometimes use the speaker phone when on calls at times. Seems to amplify it a bit more but comes from back for music. But haven't seen but haven't tested much on what music could get muffled out due to the way it is done.
Hope this answers or helps some that might wonder about it.
Uodate #2
Seems I forgot I still had the AT TGSP and for now no sensitivity issues at all and not like the Proglass has occurred. Will update if it does but for now this would be my combination of screen protector and case.
Sent from my SM-G935V using XDA-Developers mobile app
s.lanso said:
Update:
As mentioned sensitivity wasn't a big problem or no problem I've seen.
But because its' a plastic screen I and because of my old TGSP didn't full extend to the end of the phone. I decided to get the Tzunami ProGlass from walmart. Installed it and put the case back on. Which should add extra protection on screen.
Even though responsiveness was good this seem to bump it up a bit more as it sticks more to the plastic and doesn't leave much. Plus you should not have a problem with it breaking as it just sits inside case.
Likely going to put the GPEL2 When I receive it but likely this might be my set up for my phone. The case looks nice and hope this is an improvement from their other cases.
UPDATE: Sensitivity issues as well from others with the ProGlass. So waiting on GPEL2.
2nd update of the case
I forgot to mention, this could be a pro or con depending if you use speaker a lot or not. I do listen at times but most of the times I use bluetooth headphones or speakers so no problem plus sound seems to be extended a bit more.
But the sound from the speaker is somewhat transferred and the back is used to transfer the sound out which would be why they use the type of material for the back. As if you see pictures of it the bottom you won't see a speaker cut out instead it's for the cord. So if you really depend on the sound from the speaker, the sound would be coming from the back of the phone instead of the side. You won't have to worry about covering it with your finger.
It does help when talking to someone on speaker phone, which is an advantage if you sometimes use the speaker phone when on calls at times. Seems to amplify it a bit more but comes from back for music. But haven't seen but haven't tested much on what music could get muffled out due to the way it is done.
Hope this answers or helps some that might wonder about it.
Click to expand...
Click to collapse
Thanks a lot for the depth, and the detailed report.
Question : is it so necessary to have a screen protector?
Sakisgre said:
Thanks a lot for the depth, and the detailed report.
Question : is it so necessary to have a screen protector?
Click to expand...
Click to collapse
No it is not really necessary but as others mentioned this is plastic. But I feel that phone is safer if screen is protected by Tempered glass than films or plastic films. As there's no big lip on front and only thing protecting front the the plastic film I just rather be protected than not be.
Sent from my SM-G935V using XDA-Developers mobile app
Hello, Want to update on the case as you read my other post mentioning some openings on the home and earpiece, seems that was a faulty case as was missing films for the waterproofing that it supposed to protect.
Seems my first one was missing the films that go in the earpiece and home button so wasn't fully waterproof but had no sensitivity issues, the next one had high sensitivity issues on the top area where the first one didn't. Ghostek has been nice and quick in sending replacements and honoring their warranties. Right now I have the first one installed until I received the third case. As there is no sensitivity issues.
I did drop the phone from about 4.2 ft high with no damage. The phone fell front side. I do have a tempered Glass installed and no difference with or without on sensitivity. There does not seem to be any damage on the phone or case. The drop was accidental and kind of scary as well when it fell face front. Even though it was on a case. But glad I had the setup I had.
The only drawback I see is that with fingerprints I don't have a problem with the one with no films(1st case) but with the films on(2nd Case) the best way for it to read is putting your finger side ways. Which works all the time when you put your finger sideways but when upwards is a small chance that it would detect or not.
Just received mine today. Spotty fingerprint scanner, the screen has the little dots all over when you shine lights on it or are out in the sun, definitely a loss in touch sensitivity due to the front film not touching the screen unless you press down on it.
Hello friends, my question is, is that possible to call someone while using this case?
dyba83 said:
Hello friends, my question is, is that possible to call someone while using this case?
Click to expand...
Click to collapse
I've had no problems when I have good reception. The only times I have problems is when I have 1x when outside in small areas plus work truck kind of blocks signals.
But regular use with not problems on signal, I haven't had any complaints.