I decide to share it there because I don't know better place for this...
This is an Xposed framework variant built for MIUI based devices running Android 5.0, 5.1 and 6.0.
Tested and working on latest ROM's on various devices.
Fully working resource hooking and themes.
Prerequisite:
- Custom recovery (CWM, TWRP)
Bugs report:
- If you get any lag, broken feature or any App force closing, post your Xposed logs.
- If you get a boot-loop, reboot and get the logcat with "adb logcat -v time".
Please pay attention:
Archive with Xposed installation contains some necessary information and it is very important to successfully installation to choose right archive.
- "arm" means the devices that are running arm32 operating system and uses ARM architecture CPU.
- "arm64" means the devices that are running arm64 operating system and uses ARM64 architecture CPU.
- "x86" means the devices that are running x86 operating system and uses x86 architecture (Intel) CPU.
- "sdk21" means Android Lollipop 5.0.x
- "sdk22" means Android Lollipop 5.1.x
- "sdk23" means Android Marshmallow 6.0.x
If you try to install wrong archive it will not installed and error message appears in TWRP installation log.
Magisk
Magisk (systemless) variants of archives separated only by Android versions (sdk21, sdk22 and sdk23). CPU architecture will be detected automatically.
How to install:
- Install Xposed Installer app
- Make a nandroid backup
- Copy the Xposed file and the uninstaller to your sdcard
- Flash "xposed-vxx-sdkxx-armxx-MIUI-edition-by-SolarWarez-xxxxxxxx.zip" through a custom recovery (TWRP/CWM...)
- Reboot and wait, it may take several minutes to boot up depending on your ROM size and installed apps amount. If phone still not boot after 5 minutes then you need get boot log by "adb logcat -v time", reboot into recovery and restore backup or de install Xposed
Attention!
Starting from v86 official version of Xposed become more compatibly with ROMs that use a Resources subclass for e.g. theming, like MIUI.
So, try firstly official Xposed on your device. If it will works well (take a look at themes, if they works well, then all Ok), then you doesn't need this version of Xposed.
But I suppose that on some devices official Xposed still may cause bootloops.
Donate to @rovo89
All credits go to @rovo89 for his amazing job on Xposed framework
Can you post your sources? Are the "Resources" and "TypedArray" the only changes?
Share your sources please
Thanks
in mi4c works perfect!!!thanks man
the only thing that ''breaks'' is edge utility!!!and another that dowload modules manual not from inside app(doesnt care at all) just mention it!!!thanks again!!!
Can't download MODULES directly from xposed app.
Sent from my MI 4S using Tapatalk
ViTAMiNCHEG said:
Can't download MODULES directly from xposed app.
Sent from my MI 4S using Tapatalk
Click to expand...
Click to collapse
That was always a issue with xposed and miui, even when I've used it on my nexus 4. Guess it have something to do with permissions with miui.
Line app unable to open photo selector activity https://drive.google.com/file/d/0B3TzmNRa2nE6RE1kbHhuNUV5Y2c/view?usp=drivesdk
Sent from my hermes using XDA Labs
Nice! I submitted a request for include this in Material Design Xposed Installer. It would be awesome!
If i already flashed v80, do i need to flash the uninstall.zip before flashing v83, or can i flash v83 directly?
dagger1 said:
If i already flashed v80, do i need to flash the uninstall.zip before flashing v83, or can i flash v83 directly?
Click to expand...
Click to collapse
Flash it directly without uninstalling
Sent from my MI 4S using Tapatalk
Hey bro i was using miui v80 on mi4 wile long but accidently i flashed official xposed v83 file from xposed installer and got boot loopbafter that i had uninstalled xposed with zip and rebooted phone!! My mi4 booted normaly but now if i am flashing miui xposed v80 which i previously used and clear dalvik cach than phone does not optimizing any apps and system apps crashing!! Cant do any opration!! Same is happen with v83 also and also i updated my whole miui devloper rom to new version thus i cant flash xposed got same error!! Plzzz help!!
Sent from my MI 4W using Tapatalk
saiyammorakhiya said:
Hey bro i was using miui v80 on mi4 wile long but accidently i flashed official xposed v83 file from xposed installer and got boot loopbafter that i had uninstalled xposed with zip and rebooted phone!! My mi4 booted normaly but now if i am flashing miui xposed v80 which i previously used and clear dalvik cach than phone does not optimizing any apps and system apps crashing!! Cant do any opration!! Same is happen with v83 also and also i updated my whole miui devloper rom to new version thus i cant flash xposed got same error!! Plzzz help!!
Sent from my MI 4W using Tapatalk
Click to expand...
Click to collapse
I had similar problem, fixed by deleting the xposed folder in /data partition
@SolarWarez Got bootloop after install xposed tweak (ROM: 6.4.28)
Firstly i was install xposed in my phone (arm x64 v83 hermes) and i just need to wait until it finished boot
Then i install extMIUIv7, check tickbox for enabled it, and reboot
And voila, i got bootloop
I tried to format art cache in TWRP and it fixed it.
Well this is weird seems global beta + xposed break ART Caching
Sent from my hermes using XDA Labs
Not working
Can't install on Redmi Note 2, MIUI 7.3.1 stable (Android 5.0.2).
Error is: "chown: /system/lib/libart.so.orig.gz: Read-only file system".
Manual mounting in r/w mode does not help =(
Actually, this file libart.so.orig.gz is not the first in batch and not the last, but error happens only with it.
update: I have modified SolarWarez's package, now installs normally. Tested, working.
(what i did is disabled script interruption on some errors while setting owner and permissions on files).
Download here: https://drive.google.com/open?id=0B4lahQDWFyqqOHJKaFFfbEtmZlE
How to uninstall Xposed?
I have flashed xposed-v83-sdk22-arm64-MIUI-edition-by-SolarWarez-20160428 but any downloaded and enabled module won't work (even after reboot).
Moreover my Xiaomi Redmi 3 Pro is laggy now.
How can I unistall it?
ROM MIUI 7 by miui.it 6.5.5 based on Android 5.1.1.
Edit:
Uninstalled flashing xposed-uninstaller-20150831-arm64.zip by TWRP
I'll use it when I buy my Xiaomi... in the future...
Hi just discovered a bug: when in stock browser I go to bookmarks/history browser force closes. This also happens when browser tries to show a dialog window (for instance, when you go to xiaomi.eu it asks to install tapatalk). Log attached
Edit: attached another log got when getting to copy text in stock browser
I have flashed xposed-v83-sdk22-arm64-MIUI-edition-by-SolarWarez-20160428 on MIUI7 using Lenovo A7000-a
Xposed give error, Phone freezes and I have to retart it by pulling battery of mobile phone. I am using Xposed for only XInternalSD because its mount SD Card as internal Memory.
When is v84 coming? Hope bugs get resolved and there's compatibility with miui 8
Hello,
I'm trying to install Xposed framework on latest version of Copperhead OS on Nexus 5.. I see in Xposed log 'Cannot load any modules because /data/data/de.robv.android.xposed.installer/conf/modules.list was not found'
via File Explorer in running system storage /data/.. is empty. In TWRP File Manager i can see the content of /data/..
Is there anyone who can help me to sort it out?
The latest Cooperhead is based on stock kernel of AOSP 6.01
Thank you for help
Hi guys..
Many of you have an idea what multibooting is and some of you actually do it.. Like Using Ubuntu alongside Windows..
Today I'm pleased to share with you an app which you can use to dual boot any MM Roms or lollipop.. I.e (RR and AICP)
This is not my work. Am just sharing it for our Tab 3 Lt02ltexxx users.... Thanks
Let's Start
1.Download the ROM you want to Dual Boot..
2.You must have your primary ROM installed in your Tab i.e I've Resurrection Remix as my Primary Rom..
3.Download the Apk From here.
4.Just Open the app and go to patch zip file, From there choose the zip and Choose S4 Mini (Serrano) from the list of the devices and choose it as secondary Rom
4.Now patch the zip file you want to dualboot.. It'll create new zip file like this [xxxxxxx-dual.Zip]
5.Do the same for GApps And xposed if you like..
Installation
Take a full backup Guys and i mean full
1.Boot into TWRP and flash the new zip files as in [xxxxxx-dual.zip] Files..
2.After installation just boot straight into system and congratulations you've just dualbooted..
ORIGINAL THREAD:S4 Dual Boot
This Work is owned by:chenxiaolong
.
Make sure to thank him..
Does this work on the galaxy tab 3 8 and 10.1? Are you still working on this device? I hope so..
I have a very simular device to the 8 & 10.1. My device is called the asus trio TX201LA. Same soc, IFIW, same droidboot, same DNX as the Gtab 10.1
What I am wondering is if you would help build a dual boot patchier support for my device, (zenfone 2 also has it which is also on the same soc) that should be easy to add in support for my device given this info
Here is the kernel code & current 4.2 rom:
http://support.asus.com.cn/Download.aspx?SLanguage=en&m=TX201LA&p=3&s=587
current rooted rom: https://yadi.sk/d/wiHvkQp-dEyuC
TX201LAF (same device released in france): http://support.asus.com.cn/Download.aspx?SLanguage=en&m=TX201LAF&p=3&s=587
SO what do you think? Can you help me?
You can run more than one system through this APP.
I have handed up the "pull requests" to the dualbootpacher project for 10 days,but there is no respond.
I can't wait for it anymore,I just want to use the viper4android on PRO5,and still use the Flyme...
So I decide to do it with myself...
It is another way to the goal...hah...
You need to flash a unofficial kernel,if you want to use the application.
What you want is all in the zip.
A patchable kernel:https://forum.xda-developers.com/me...tpacher-pro5-unofficial-t3628955/post72850240
The official website:https://dbp.noobdev.io/
Its official source code on Github:https://github.com/chenxiaolong/DualBootPatcher
Songthings said:
I have handed up the pull requests to the dualbootpacher project for 10 days,but there was no respond.
I can't wait for it anymore,I just want to use the viper4android on PRO5,and still use the Flyme...
So I decide to do it with myself...
It is another way to the goal...hah...
You need to flash a unofficial kernel,if you want to use the application.
What you want is all in the zip.
Click to expand...
Click to collapse
Could u explain how it works ?
PYCON said:
Could u explain how it works ?
Click to expand...
Click to collapse
I just add a support for PRO5,you may find the answer here:https://github.com/chenxiaolong/DualBootPatcher
Thanks!!! faust already uploaded one multiboot but there were some issues. I'll try your version. Thanks!!
would this work to install ubuntu as secondary?
Add a patchable kernel,edited from the newest flyme(Chinese version) kernel.I feel it is smoother than any unofficial kernel.
(Better signal also)
An unofficial but official kernel.
You can use TWRP to flash it,you'd better backup your original boot before flash it,please remember any unofficial kernel will cause serial number losing(display is unknown).Of course, it will be back after you restore your kernel.
Flyme6 ONLY.
Mollic said:
would this work to install ubuntu as secondary?
Click to expand...
Click to collapse
:crying:I don't know,I haven't used Ubuntu mobile anymore.
It is for any flashable zips,
?Maybe you can give a try?
I have the dual boot working. I had to face some issues:
1. If I install Flyme as main rom and RR as secondary, the RR home button tap is not working.
2. If I install RR as main rom and Flyme as secondary, Flyme reboots just before start.
3. If I install one in main slot and other in dual slot, all system space is full and I couldn't flash google apps in RR rom.
The problem of points 1 and 2 is DTB partition is different in flyme and RR and the dualboot manager is not managing it.
To solve this issue I have used the TWRP by @st0rm77 in https://forum.xda-developers.com/meizu-pro-5/development/recovery-twrp3-0m86patchedst0rm77-t3469296
I have created a backup of DTB(Device Tree) partition for flyme and other backup of DTB partition for RR.
If I'm on flyme and I want to move to RR:
1. Restart in TWRP recovery and Restore RR DTB backup
2. flash dualbootutilities zip. It is an aroma manager to manage your dual boot roms. I select secondary rom (RR) and then "switch to"
3. reboot.
If I'm on RR and I want to move to Flyme:
1. Restart in TWRP recovery and Restore Flyme DTB backup
2. flash dualbootutilities zip. It is an aroma manager to manage your dual boot roms. I select primary rom (flyme) and then "switch to"
3. reboot.
To face the point 3 problem I have flashed RR in one Data slot named "rr".
p82maarj said:
I have the dual boot working. I had to face some issues:
1. If I install Flyme as main rom and RR as secondary, the RR home button tap is not working.
2. If I install RR as main rom and Flyme as secondary, Flyme reboots just before start.
3. If I install one in main slot and other in dual slot, all system space is full and I couldn't flash google apps in RR rom.
The problem of points 1 and 2 is DTB partition is different in flyme and RR and the dualboot manager is not managing it.
To solve this issue I have used the TWRP by @st0rm77 in https://forum.xda-developers.com/meizu-pro-5/development/recovery-twrp3-0m86patchedst0rm77-t3469296
I have created a backup of DTB(Device Tree) partition for flyme and other backup of DTB partition for RR.
If I'm on flyme and I want to move to RR:
1. Restart in TWRP recovery and Restore RR DTB backup
2. flash dualbootutilities zip. It is an aroma manager to manage your dual boot roms. I select secondary rom (RR) and then "switch to"
3. reboot.
If I'm on RR and I want to move to Flyme:
1. Restart in TWRP recovery and Restore Flyme DTB backup
2. flash dualbootutilities zip. It is an aroma manager to manage your dual boot roms. I select primary rom (flyme) and then "switch to"
3. reboot.
To face the point 3 problem I have flashed RR in one Data slot named "rr".
Click to expand...
Click to collapse
Yeah,PRO5 has no suitable firmware,working in both RR and Flyme...
And what a pity, the dualbootpacher has not supported the firmware switch...
Do you think it is necessary adding a support for boot gui ???
the viper4Android could install on flyme6 and it's working.
常山找邓艾 said:
the viper4Android could install on flyme6 and it's working.
Click to expand...
Click to collapse
老哥，有教程嘛？是全局viper音效吗？??
This is offical rom to port the rom. This is esay way to flash offical frameware rather than using odin flash method.
Your warranty is Void, If anything happens to your device is solely your responsibility. This Rom is only tested on SM-A500F
Code:
First Backup Everythings-
DATA,SYSTEM,EFS,MODEM,RECOVERY
Flashing-Instruction From META-INF
Quote:
#--INFORMATION
#--PREPARE DEVICE PARTITIONS
#--INSTALLATION
#--SYMLINKS
#--PERMISSIONS
#--KERNEL
#--CUSTOM SCRIPTS
#--FINISH
This is working for Samsung galaxy A500F for Devices.
This is stable Rom port form the Offical frameware.
NOTE FOR ALL
I DON’T ALLOW CHEFS/DEVS/THEMERS/COPY PASTERS TO USE MY FILES IN HIS ROM OR MOD
ROM INFO / FEATURES
1-Based on marshmallow v6.0.1
2-SU+SUbinary
3-Busybox
4-DE bloated
5-Zip aligned
6- removed unused app
INCLUDED THEMED APPS FROM STOCK-FRAMEWARE
SuperSU
Backup app
SystemUI
Calculator
Camera
Clock
InCallUI & Contacts
Galaxy Apps
4Email
Internet
Messages
Music Player
My Files
Voice
Settings
Video Player
Quote:
Notes –
- Standalone flashable zip
- Rom includes -modem A500FXXU1CPH2
Quote:
Bug:-
no bug.
if find bug then post here
video link below:
https://youtu.be/EU8JUaboCdc
Code:
PORT FROM-OFFICAL-FRAMEWARE
LET'S GET THIS INSTALLED, THEN!!!
Turn off your A5
Turn it IN recovery mode by pressing power button+home+ vol up
Wipe data and confirm with power button
Flash the ZIP and wait for it to complete.
IT take some 5-10 min to start, so wait till phone automaticall ON.
ROM-LINK- https://mega.nz/#!8lxlFKZA!-5LrUfW5dtQOysxPFj-dd_gTWXOCTPAlNKzvkIbYPdk
Click to expand...
Click to collapse
Reboot and enjoy (be patient, this one takes a bit longer to first-boot)