I'm basically locked out of fastboot and recovery, neither adb commands or power/volume keys are helping.
I'm on Resurrection Remix Nougat version 5.8.4 9 (september 2017, outdated) and I'm not quite sure how to fix this issue.
Any help is really appreciated, thanks.
I fixed the issue
Have you fixed this ?
If not have you tried booting in to recovery via the about phone -> system update -> three dots at the top right and 'reboot to recovery mode'
?
hey, I have the same issue. I cant boot into recovery mode anymore. how did you fix it?
1.Power off
2.Hold vol+,vol-,power button together until you see mi logo, release power button.
3.wait, maybe take more than 10 secs.
Hi i am new to this redmi devices,
i have waited 72hours for my phone to unlock, and unlocked it with Miunlock method, now i downloaded Twrp official one and flashed normally.. and booted into it, i thought everything was going fine..
so i rebooted my phone, it has been stuck at MI logo with Unlocked message for 30 mins..
got a doubt, and connected my phone again.. now Adb cant detect my device, i want my phone to be detected by ADB.. but its not happening..
i tried pressing V+, V- and power button but couldnt boot into TWRP, instead it booted me to MI recovery,
i tried wiping the phone, but no use.. its still stuck at MI unlocked logo..
any help ?? please
i had flashed TWRP official 3.2.1,
---------- Post added at 02:01 PM ---------- Previous post was at 01:43 PM ----------
finally made it boot thanks in adv
Related
Hello.
Cant get any help anywhere, hope here someone will help me.
I have LG G2 VS980 32Gb version. I have rooted it myself, I installed on it TWRP bootloader and xdabbeb_vs980_3.1.2 ROM and everything worked perfect.
But I wanted to install CM12, when I was doing that TWRP "told" me something like "your device is not rooted, do you want to root the device" with yes button. I thought "why not?" and pushed the button.
After that phone has no reaction on any combination of buttons, but Windows 8.1 see my phone as qhsusb_bulk.
P.S. I cant get it to download mode.
can someone help me?
If you installed TWRP, then boot into it by holding pwr + vol down until lg logo shows then do it again it will then load twrp. Click yes twice to factory reset.. Its not reallly gonna do it since your rooted. The rom probably isnt enabled in settings.
---------- Post added at 02:33 AM ---------- Previous post was at 02:31 AM ----------
Screenshots help, what kernel, radio? Info man
biggiesmalls657 said:
If you installed TWRP, then boot into it by holding pwr + vol down until lg logo shows then do it again it will then load twrp. Click yes twice to factory reset.. Its not reallly gonna do it since your rooted. The rom probably isnt enabled in settings.
---------- Post added at 02:33 AM ---------- Previous post was at 02:31 AM ----------
Screenshots help, what kernel, radio? Info man
Click to expand...
Click to collapse
as i said, phone has no reaction on any combination of button press. :crying:
i used XDABBEB v3.1.2 ROM, don't know what kernel it has.
and sadly i don't remember what radio i used.
but i remember "xdabbeb vs98039a" bootstack version.
Did u plug it in?
biggiesmalls657 said:
Did u plug it in?
Click to expand...
Click to collapse
pluged it with ac charger it did not charge.
pluged it in PC with Windows 8.1, sees it as qhsusb_bulk
pluged it in PC with Slax Linux 7.0.8, it did not see it.
pluged it in PC with CentOS 7, it did not see it.
So there is a unbrick utility in the verizon forums G2. If you was in twrp before and you didnt Reflash the recovery then its bootable to twrp. What happens when you turn the phone on. Vol down and pwr when turning on release the buttons and then hold those buttons again and it will load twrp. Do you see the LG Logo at all or you in fastboot mode?
biggiesmalls657 said:
So there is a unbrick utility in the verizon forums G2. If you was in twrp before and you didnt Reflash the recovery then its bootable to twrp. What happens when you turn the phone on. Vol down and pwr when turning on release the buttons and then hold those buttons again and it will load twrp. Do you see the LG Logo at all or you in fastboot mode?
Click to expand...
Click to collapse
phone is not turning on, there is no LG logo, i can t access twrp or download mode.
screen is always off whatever i am doing.
FENIX-REX said:
phone is not turning on, there is no LG logo, i can t access twrp or download mode.
screen is always off whatever i am doing.
Click to expand...
Click to collapse
You have to make sure you are using a fastboot cable
Edit: TWRP is a custom recovery not a bootloader. 39a bootstack is required lollipop for the LG G2 verizon VS980 model. Have you try flashing stock. If you bumped twrp to your device then you should be able to access it. If the device is fully dead find a fastboot cable just so it will show the LG logo and that point you can load twrp. You cant revive a dead device or can I? Lol also your selinux must be set to permissive or your device will not boot. TWRP doesnt require root to flash roms and make backups. If you have a sign of any life your device is not bricked. I have bricked many devices and i have found a way back. Just stay positive If you need more help post screenshots of your cable and use a wall charger not usb!!!!
---------- Post added at 10:20 PM ---------- Previous post was at 10:06 PM ----------
Windows is the only way to fix it if im not wrong?
After flashing CM 12 recovery my device shows "no command" error when in recovery
Hi Guys,
I have a moto g 2014 xt 1068
finally decided to install cyanogen mod on my device and used the guide provided here.
I have unlocked the bootloader
I have followed the steps: adb reboot bootloader -> fastboot flash recovery my_image.img -> entered recovery it worked. It didn't have any 'install from zip options'.
The tutorial said to copy the files on the internal card, which I did after booting the phone. Then I wanted to enter recovery mode again and this time it showed a black screen followed by the message "no command" and a dead android animation. If I hold the power button for a few seconds it restarts in normal mode and I can use the phone, but I can't install cyanogen mod.
I tried flashing again the cynogen recovery, it worked, I could enter the menu, but again, no 'install from zip' option. If the phone boots in normal mode, the cyanogen recovery gets corrupted or something and I can't use it. I'm afraid to brick my device if I continue with something else by my own and wanted to ask you guys for help.
I'm not a total noob when it comes to phones (rooted, flashed a variety of devices in the past) but I'm not that familiar with the recent developments.
Thanks!
Nevermind,
installed TWRP and made sure that:
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Click to expand...
Click to collapse
My solution
First go to this link to restore to stock using this easy install script by @reefuge (find your device and country)(THIS WILL WIPE YOUR INTERNAL STORAGE!!)
http://http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-5-0-2-lxb22-46-t3019612
While restoring stock do not lock your bootloader.
Now got to this link for twrp : http://dl.twrp.me/titan/ Download 2.8.6.0
Now you put the twrp file in the platform tool in your android sdk. and install as usual.
Now disconnect from comp and press volume down button to selet recovery and then press vol up to enter into recovery. TWRP will patch your system to restrain it from reverting to stock recovery. Now youre done flash whatever you want.
One more thing : Try this battery guide By @Abhishek Bhagwat (works really well and its noob friendly) http://http://forum.xda-developers.com/moto-g-2014/general/guide-battery-guide-cm-based-stock-t3153365
I'm sure 90% that this will solve your problem. But if it doesnt well we'll see about that if it doesnt.
---------- Post added at 03:34 PM ---------- Previous post was at 03:32 PM ----------
*facepalm* You replied that you fixed the issue while i was typing my solution (We'll ill never see thise 15 min ever again)
Hello, my p9 is don't boot up, i can boot in rescue mode (fastboot) but it's the only mode i can boot, otherwise my phone bootloop
In rescue mode i have : android reboot reason ap_s_abnormal
And i can't turn off my phone only reboot it with 10sec power key method.
Before it happen i was in c432b382 and i tried to flash a c432b378 update to have android nougat
I really need help thanks for your time ...
Download
Skygun_ said:
Hello, my p9 is don't boot up, i can boot in rescue mode (fastboot) but it's the only mode i can boot, otherwise my phone bootloop
In rescue mode i have : android reboot reason ap_s_abnormal
And i can't turn off my phone only reboot it with 10sec power key method.
Before it happen i was in c432b382 and i tried to flash a c432b378 update to have android nougat
I really need help thanks for your time ...
Click to expand...
Click to collapse
Download marshmallow rollback from Huawei site and put it on sd
Create in the root of the SD a folder named dload and put update.app.
Turn on phone holding vol up+down and wait.
Sorry for bad english
---------- Post added at 09:46 AM ---------- Previous post was at 09:34 AM ----------
There are 2 part for rollback your huawei p9
I can't share links because I'm new on this site
First flash part 1 it is 90 Mb
The second 2.6 GB
Hi thanks for your time, i already tried this but i can't boot in update mode. it boot only in rescue mode or bootloop so i can't flash any update files ...
Up. Please Can someone help me ?
Did you fix this? I'm having the same issue
Hi, today i tried to flash twrp on my tablet, i did everything right, like, OEM and unlocked bootloader and etc, i flashed TWRP from the odin on download mode, and now, i cant get out from the twrp logo, its just get stucked there, like, i press vol down + power, the tablet resets, and then, it go back to the twrp screen, and wen i connect to the pc, it dont recognize it, the twrp version that i had installed is the 3.3.1-0, someone can help me with that?
I have the exact same problem except with a T-515 and twrp 3.3.1-2.
Could someone please explain how to solve this problem?
thanks
Same problem with TWRP 3.3.1-1. Did you find any solution?
---------- Post added 13th May 2020 at 12:30 AM ---------- Previous post was 12th May 2020 at 11:44 PM ----------
Solved:
1) used @Magendanz tip how to switch in download mode:
UPDATE: With the right timing, you can break out of a boot loop into Download Mode...but it's tricky:
Insert USB Type C cable connected to your PC
Press and hold the Power and Volume Down keys for exactly 7 seconds (hard reset)
Release the Power key and press and hold both Volume Up & Down keys (enter Download Mode)
If you don't see the blue bootloader unlock warning screen, keep repeating the above two steps
2) in Odin install this TWRP (twrp-3.3.1-7-T510XXS3ATB4-20200413.tar.md5)
https://forum.xda-developers.com/ga...very-twrp-3-3-1-2019-galaxy-tab-10-1-t3934805
---------- Post added at 12:30 AM ---------- Previous post was at 12:30 AM ----------
Solved:
1) used @Magendanz tip how to switch in download mode:
UPDATE: With the right timing, you can break out of a boot loop into Download Mode...but it's tricky:
Insert USB Type C cable connected to your PC
Press and hold the Power and Volume Down keys for exactly 7 seconds (hard reset)
Release the Power key and press and hold both Volume Up & Down keys (enter Download Mode)
If you don't see the blue bootloader unlock warning screen, keep repeating the above two steps
2) in Odin install this TWRP (twrp-3.3.1-7-T510XXS3ATB4-20200413.tar.md5)
https://forum.xda-developers.com/ga...very-twrp-3-3-1-2019-galaxy-tab-10-1-t3934805
I've unlocked my mi cc9 with the mi unlock tool. The phone rebooted then I tried to enter fast boot to flash twrp and the phone flashed the fastboot screen then rebooted normally automatically. Any help would be greatly appreciated.
Did it reboot from fastboot to system while it was connected to a pc?
Which rom do you have?
It's stock rom still i couldnt flash twrp. I hold down and power to boot fast boot not connected to PC and it flashes the fastboot screen then reboots to system
Reboot your device. Right after the screen shuts down press the volume down without the power button.
Maybe the device reboots because you are pressing the power button
---------- Post added at 08:47 AM ---------- Previous post was at 08:45 AM ----------
Reboot your device. Right after the screen shuts down press the volume down without the power button.
Maybe the device reboots because you are pressing the power button
That works thanks now the next thing how do I find out if I have pyxis or Vela device
Check the storage capacity. If it is 256gb it is vela.
Check the back side of the phone. If meitu is written on the back that is vela.
There is also a fastboot command to check the device name but that won't be necessary. Only vela has 256gb of starage. And only vela named meitu