Hi friends,
i am unable to turn on my wifi and i have bluetooth issue also..When i click on wifi toggle its automatically going to off and bluetooth does not showing any devices...Can any one please help...
I found below thread for this kind of issue..But it did not solve my problem.
https://forum.xda-developers.com/moto-g-2014/general/fix-wifi-missing-file-t3007540
Can anybody share the Bluetooth and wifi bin files for moto g5s plus.
Thanks in advance
Did you try rebooting? You could always try wiping the cache. Otherwise, you might need to reset the radio, but do this at your own risk, there's always a chance that you'll end up having to do a factory reset.
Code:
fastboot erase modemst1
fastboot erase modemst2
Related
Well I tried installing Titan Rom and then had to update the bootloader.
While fastboot didn't recognize my phone when i typed "adb devices" it still said it was connected, so I gave it a shot with the following instructions here.
http://forum.xda-developers.com/moto-g-2014/general/bootloader-update-t3060007
So I noticed that it erases modem 1 and 2.
I have wifi, but no network for my carrier to make calls or receive data.
My backup didn't reset the modem either. Phone is back to the way it was saved during TWRP backup, except for the modems/network.
Any suggestions?
Thanks.
hi
Mmm i will try to help you - tell me what version bootloader and recovery you have installed pls.
TWRP 2.8.6.0
bootloader v, can't tell you, trying different things to find out now.
TWRP 2.8.6.0
bootloader 0x4882
CindysD said:
Well I tried installing Titan Rom and then had to update the bootloader.
While fastboot didn't recognize my phone when i typed "adb devices" it still said it was connected, so I gave it a shot with the following instructions here.
http://forum.xda-developers.com/moto-g-2014/general/bootloader-update-t3060007
So I noticed that it erases modem 1 and 2.
I have wifi, but no network for my carrier to make calls or receive data.
My backup didn't reset the modem either. Phone is back to the way it was saved during TWRP backup, except for the modems/network.
Any suggestions?
Thanks.
Click to expand...
Click to collapse
I'm not sure what model of Moto G you have, but for the data problem, you'll have to input your API settings. Flashing will usually wipe them out. Go to Settings, More (under Wireless & Networks at the top), Cellular Networks, Access Point Names. There you should see your carrier. When you click on it, it will open and here you will need the settings for your carrier. If you give me your carrier, maybe I can tell you what to input or someone else here will surely have the same carrier.
Going back one step, where you see Network Operators, click on that and see if your operator comes up. If so, that may fix the phone problem when you select the carrier.
you probably flash the wrong ''modem NON-HLOS.bin'' file.
did you notes that in the download folder have 5 folder one for it device model?
Did you download the one for your's device exactly model?
If so it may be wrong...
Find a XML ROM of yours exactly device and flash again the ''modem NON-HLOS.bin''
to find the ROM search here
Use this commands but with the right file.
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
modemst1 and 2 is only erasing the temp stats of modem not erase the modem files.
Hey Guys, i'm really struggling to find a solution to this as every time i try to google a solution it just comes up with a load of results trying to tell me how to change my wallpaper :/
So basically, overnight, my dad's Moto G 4G started to act strangly. It can still:
Boot up normally
Power Off normally
Vibrates when notifications come through
Rings, all be it temporarily when called and can be answered if connected to the car's bluetooth.
However, it will no longer display any of the UI (other than the Power Off dialogue) and the wallpaper. I can see that the phone isn't completely frozen as the wallpaper in use is a live wallpaper which you can interact with via touch.
When the phone is plugged into my laptop the phone is showing in 'my computer' but it shows no files, same situation in recovery and fastboot too.
I've tried wiping the cache from recovery but it's still the same.
There was one instance where the first time i plugged the phone into the laptop via usb it brought up the whole ui, icons, status bar and all, for like 2 seconds.
Now, back to nothing. Not sure what to do from here. I'm desperately trying not to factory reset it as my grandfather (my dad's dad) passed away recently and i'm pretty sure there are files on here which are now irreplaceable
jhaedee said:
Hey Guys, i'm really struggling to find a solution to this as every time i try to google a solution it just comes up with a load of results trying to tell me how to change my wallpaper :/
So basically, overnight, my dad's Moto G 4G started to act strangly. It can still:
Boot up normally
Power Off normally
Vibrates when notifications come through
Rings, all be it temporarily when called and can be answered if connected to the car's bluetooth.
However, it will no longer display any of the UI (other than the Power Off dialogue) and the wallpaper. I can see that the phone isn't completely frozen as the wallpaper in use is a live wallpaper which you can interact with via touch.
When the phone is plugged into my laptop the phone is showing in 'my computer' but it shows no files, same situation in recovery and fastboot too.
I've tried wiping the cache from recovery but it's still the same.
There was one instance where the first time i plugged the phone into the laptop via usb it brought up the whole ui, icons, status bar and all, for like 2 seconds.
Now, back to nothing. Not sure what to do from here. I'm desperately trying not to factory reset it as my grandfather (my dad's dad) passed away recently and i'm pretty sure there are files on here which are now irreplaceable
Click to expand...
Click to collapse
Ouch, looks like an emmc problem, some partitions may be corrupted.
1st be sure if the usb cable is ok, i have seen many cable going nuts and loosing data but still charging.
If the usb cable is dead you will need a working one anyway to try to recover the phone after you got your data.
Also try apps like airdroid works, you can save everything wirelessy from your pc.
When you have a working cable and still failed to save data you can try to flash a recovery that allow mounting partitions to your pc ( twrp ) whitout booting the os, since for what i understood your android installation got corrupted somewhere and is borked.
Wich model is that one ? should be an XT1072 right ? YOU MUST BE SURE or flashing the wrong stuffs can totaly BRICK your phone.
If it's an XT1072 i have uploaded for you the latest UK stock image to mega.nz so you can dl it quickly
https://mega.nz/#!fId0yD4a!LjyEIjRXse092l7j_JL0Ky324EK6SS4vK4kdqGcS9XY
You will need fastboot + mfastbbotv2 and here they are
https://mega.nz/#!bdEDBDiQ!3KlB6WfUxUep1QR7XSvwpuCuxWnktfCh7YBX020HqmY
Put everything in the same folder ( ex c:\phoner )
open a dos shell whit admin privileges and navigate to that folder, then use this commands and check after every commands if you get back the OK on flashing (you can copy-paste them into the shell)
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata <--- DON'T use this only if you wasn't able to recover your data whit the others methods
mfastboot.exe reboot
The phone should have rebooted, may take longer to boot don't panic, now the phone should be ok and if you didn't wiped the userdata it should be 100% the same as before whit the latest stock fw, my advice is to do a full factory restore to use it, so once you recovered your data do a factory reset from the android menu.
If the phone isn't a 1072 as supposed dl here the correct zip http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC
If you have more questions, especially on flashing twrp/stock just ask before doing anything that could turn the phone into a stone.
Thank you Dr. Nic for your incredibly informative response
Firstly, I was wrong initially, it is actually a XT1039 (first gen 4g) but this does appear to be listed on the file factory page you linked so I should be fine with the instructions.
What I do want to ask though is:
Is there anyway for me to boot twrp without installing it as a temporary basis? I'm sure I've done this before previously on my old moto x but it has been a while. I seem to recall you can type in a fast boot command and get it to boot to twrp. The phone is not rooted or bootloader unlocked (which i know will wipe the phone if I do it so that isn't really a permanent option yet)
Secondly, is there any way for me to find out which stock rom files I need without being able to access the os and looking in settings? I know it is a xt1039 but there are about 5 different, carrier based versions available and I don't want to flash the wrong one.
Thanks again for all your help
If this goes to plan you will have made my father's Christmas special
jhaedee said:
Thank you Dr. Nic for your incredibly informative response
Firstly, I was wrong initially, it is actually a XT1039 (first gen 4g) but this does appear to be listed on the file factory page you linked so I should be fine with the instructions.
What I do want to ask though is:
Is there anyway for me to boot twrp without installing it as a temporary basis? I'm sure I've done this before previously on my old moto x but it has been a while. I seem to recall you can type in a fast boot command and get it to boot to twrp. The phone is not rooted or bootloader unlocked (which i know will wipe the phone if I do it so that isn't really a permanent option yet)
Secondly, is there any way for me to find out which stock rom files I need without being able to access the os and looking in settings? I know it is a xt1039 but there are about 5 different, carrier based versions available and I don't want to flash the wrong one.
Thanks again for all your help
If this goes to plan you will have made my father's Christmas special
Click to expand...
Click to collapse
So 1 thing at time
Probably the others fw you saw was olders versions too or for others regions, i suggest to use the same as you have or the latest
You are completly unable to check your current os installed from phone infos ? have you checked everything on the box ? somewhere there must be some infos, maybe under a barcode sticker.
This should be your latest UK stock, XT1039 aka "peregrine", do you rember if you was on 4.4.4 or 5.1 ? you should flash the same version to improve the % of not loosing something.
Clean Stock 5.1 http://www.filefactory.com/file/dpx...RINE_RETGB_5.1_LPB23.13-17.3_cid7_CFC.xml.zip
So, the cable is ok ? are you able to issue commands whit fastboot ?
If yes unlock the bootloader to install a modded recovery, you will need that to copy your files, and if that fails last try is flashing stock whitout deleteing userdata, but the corruption could be both in /data and /system so after the recovery you will have to do a factory reset anyway.
To boot twrp you have to flash it, don't worry if you want the phone full stock again is the last step you have to do that to fix the corruptions happened, and it's no 100% success rate too since that could happened becouse the emmc is failing
My OnePlus 3T had gone into a bootloop after updating. So I used the MsmDownloadTool V3.0.exe recovery tool to unbrick my phone. Thanks to this wonderful forum.
After this I could start my phone but wifi and bluetooth were not working. I could not make or receive calls but strangely I was able to access mobile internet. I flashed an official ROM from oneplus to my device to update the firmware but no success.
I have installed TWRP and SuperSu.
MAC address is shown as 02.00.00.00....
IP address unavailable.
In Root Browser
/persist/wlan_mac.bin
/etc/firmware/wlan/qca_cld/wlan_mac.bin
files shows valid mac address.
Current situation:
No Wifi
No Bluetooth
Cant make or receive calls
Mobile internet working
Please help..!!!
Hi I am facing exactly the same issues. Have you managed to solve yours?
If you have a backup of your EFS partition, you can try if your phone works again after you have restored it.
sniperle said:
If you have a backup of your EFS partition, you can try if your phone works again after you have restored it.
Click to expand...
Click to collapse
Unfortunatley I do not have EFS backedup. Any luck without that? or can I reuse someone's else or rebuild somehow?
Thanks for your reply.
I don't know if an EFS restore would have helped, that was just an idea.
You can't use the EFS partition of another phone because it contains data like IMEI and so on.
Did you search the forum for problems with EFS already ?
Boot into fastboot mode and try typing these two commands:
Code:
fastboot erase modemst1
fastboot erase modemst2
This will force Qualcomms' modem to rebuild itself upon next boot.
Note that you have to have unlocked bootloader in order to be able to do this.
przemcio510 said:
Boot into fastboot mode and try typing these two commands:
Code:
fastboot erase modemst1
fastboot erase modemst2
This will force Qualcomms' modem to rebuild itself upon next boot.
Note that you have to have unlocked bootloader in order to be able to do this.
Click to expand...
Click to collapse
Thanks! I will try to do that today and will report back.
pokemon1122 said:
Thanks! I will try to do that today and will report back.
Click to expand...
Click to collapse
No luck, I tried all three methods as described here https://forum.xda-developers.com/oneplus-3/how-to/fix-empty-imei-unknown-baseband-sim-t3480781 but no success. No idea how to check if my EFS is really broken or not.
One thing I noticed, if I try to update to latest stock, the phone bootloops. Only os it works is that comes default with MSM tool which is pretty old. And from that os, it is not possible to connect to wifi, bluetooth etc.
pokemon1122 said:
No luck, I tried all three methods as described here https://forum.xda-developers.com/oneplus-3/how-to/fix-empty-imei-unknown-baseband-sim-t3480781 but no success. No idea how to check if my EFS is really broken or not.
One thing I noticed, if I try to update to latest stock, the phone bootloops. Only os it works is that comes default with MSM tool which is pretty old. And from that os, it is not possible to connect to wifi, bluetooth etc.
Click to expand...
Click to collapse
Did you solve the problem? I am in the same situation.
after msmdownloadtool to unbrick no wifi - I found a fix
If you unbrick your phone with msmdownloadtool and then have no wifi, the solution I found is to do a locale upgrade of the OS.
Just search google for OOS 9.0.5 for OnePlus 3T (my phone), copy it to your phone and do a locale update. Problem fixed
coolrick said:
after msmdownloadtool to unbrick no wifi - I found a fix
If you unbrick your phone with msmdownloadtool and then have no wifi, the solution I found is to do a locale upgrade of the OS.
Just search google for OOS 9.0.5 for OnePlus 3T (my phone), copy it to your phone and do a locale update. Problem fixed
Click to expand...
Click to collapse
Thank you! After many times and solutions it's works!
After accidentally selecting USA band in phone information. My sim 1 was not showing network.
I followed the following commands in fastboot mode.
Fastboot erase modemst1
Fastboot erase modemst2
Fastboot erase cache
Now I can use SIM 1 but it's working only on 2G. It's not picking up 3G.
I am using AOSP CAF rom
Please help...
I'm going through the same problem. Can someone help us?
ROM: Pixel Experience [AOSP]
Hi, guys
I ran the following commands in fastboot
fastboot set_active a
fastboot reboot bootloader
fastboot reboot
The phone was stucked in that screen where there is a colored line changing from left to right.
So I entered again into fastboot and type to go back to slot B.
fastboot set_active b
fastboot reboot
It started normally, but Wi-fi and fingerprint are not working.
Any fix? Factory reset?
I'm afraid of doing that and lose all data and wi-fi don't work again to restore.
Hello, I would backup all the data trough usb then perfom a factory reset, maybe try a different rom, Havoc is bug free for me, much better than stock. It's a software issue, so software can fix it.
i am also facing same problem after flashing pie rom,help me
[email protected] said:
i am also facing same problem after flashing pie rom,help me
Click to expand...
Click to collapse
Factory reset solved for me.
Factory reset did not help me..