I've now installed TWRP (of this flavor : twrp-3.0.2-1-oneplus3t.img ), and supersu after updating firmware to 3.5.3 on the 3t I received yesterday. It installs without problem. I've not touched encryption and I'm very wary of using TWRP at the moment, because it always asks me for the encryption password. When I initialized the phone after this setup, the only password/entry entities I entered were a) a 4-digit pin, and b) 3 fingerprints. They work fine.
When I try to boot to TWRP, I always am prompted for a password immediately. I have no idea what the password is, and have tried my known-to-be-correct PIN , no luck. I have tried hitting cancel, and then only if I agree to mount /system as RO can I enter TWRP without it trying and failing to decrypt everything which corrupts storage.
I've read the entire (TWRP) thread a couple of times, but maybe it was too late at night. I'm wondering if anyone can tell me what step I'm missing, or if I'm trying to do something that can't be done because of what was just said above (encryption isn't fully supported by TWRP yet?) , or if I just should know the password and let TWRP decrypt it. Finally, is there a way to just decrypt the phone while booted and is that even called for?
I'd like to use TWRP which seems fine in every other respect (well, I don't yet know if I can make a backup & restore, so that isn't fine), but am held up by the password entry at the start of each session. Many thanks for getting it this far and thanks for any help you might give.
hachamacha said:
I've now installed TWRP (of this flavor : twrp-3.0.2-1-oneplus3t.img ), and supersu after updating firmware to 3.5.3 on the 3t I received yesterday. It installs without problem. I've not touched encryption and I'm very wary of using TWRP at the moment, because it always asks me for the encryption password. When I initialized the phone after this setup, the only password/entry entities I entered were a) a 4-digit pin, and b) 3 fingerprints. They work fine.
When I try to boot to TWRP, I always am prompted for a password immediately. I have no idea what the password is, and have tried my known-to-be-correct PIN , no luck. I have tried hitting cancel, and then only if I agree to mount /system as RO can I enter TWRP without it trying and failing to decrypt everything which corrupts storage.
I've read the entire (TWRP) thread a couple of times, but maybe it was too late at night. I'm wondering if anyone can tell me what step I'm missing, or if I'm trying to do something that can't be done because of what was just said above (encryption isn't fully supported by TWRP yet?) , or if I just should know the password and let TWRP decrypt it. Finally, is there a way to just decrypt the phone while booted and is that even called for?
I'd like to use TWRP which seems fine in every other respect (well, I don't yet know if I can make a backup & restore, so that isn't fine), but am held up by the password entry at the start of each session. Many thanks for getting it this far and thanks for any help you might give.
Click to expand...
Click to collapse
I would start over. Get the stock recovery and flash it. Then factory reset the phone. Do not put a pin or a fingerprint at all after you have booted to the phone. Go straight to the bootloader and do the twrp flashing instructions. after you have flashed and i believe if you want to be decrypted you format data than flash supersu again. Boot into system and then back to twrp and see if that worked. I remember doing this on my nexus 6p but not sure if the kernel has to support the decryption. remember when you do a back up of your phone never never never back it up with pin or passwords or fingerprint. You wont be able to restore succesfully from my experince with the nexus 6p. make sure you back everything up before doing this and i am not responsible for any problems occured. and make sure you are on the latest update from oneplus. hope this helped
cameljockey1 said:
I would start over. Get the stock recovery and flash it. Then factory reset the phone. Do not put a pin or a fingerprint at all after you have booted to the phone. Go straight to the bootloader and do the twrp flashing instructions. after you have flashed and i believe if you want to be decrypted you format data than flash supersu again. Boot into system and then back to twrp and see if that worked. I remember doing this on my nexus 6p but not sure if the kernel has to support the decryption. remember when you do a back up of your phone never never never back it up with pin or passwords or fingerprint. You wont be able to restore succesfully from my experince with the nexus 6p. make sure you back everything up before doing this and i am not responsible for any problems occured. and make sure you are on the latest update from oneplus. hope this helped
Click to expand...
Click to collapse
That's exactly how I did it the first time, without password, without setting up phone, and when it got to TWRP (the first time), I was presented with the password prompt. When I hit cancel it went by it, but then said it was decrypting (which I didn't want), and corrupted my storage.
When I reinstalled 3.5.3, I did the same thing again, and that time was not corrupted so I was able to install supersu. At this point I've entered some fingerprints and a pin. TWRP says it supports encryption so I'm wondering about where the password comes from.
Thanks for your quick response. I'm still awaiting some reply over in the TWRP forum as well.
hachamacha said:
That's exactly how I did it the first time, without password, without setting up phone, and when it got to TWRP (the first time), I was presented with the password prompt. When I hit cancel it went by it, but then said it was decrypting (which I didn't want), and corrupted my storage.
When I reinstalled 3.5.3, I did the same thing again, and that time was not corrupted so I was able to install supersu. At this point I've entered some fingerprints and a pin. TWRP says it supports encryption so I'm wondering about where the password comes from.
Thanks for your quick response. I'm still awaiting some reply over in the TWRP forum as well.
Click to expand...
Click to collapse
Are you sure you had 3.5.3 the first time you did it?
c_86 said:
Are you sure you had 3.5.3 the first time you did it?
Click to expand...
Click to collapse
Yes, it was the first thing I did. After receiving the 3t, I skipped over all the prompts (to avoid entering accounts, waiting for sw upds and to not enter passwords) and went to software updates and allowed the 3.5.3 update to occur.
Then I did the things described above.
-----
In the interests of my trying to understand everything I'm reading about 6.x and encryption. I'm getting the drift that phones with 6.x + are encrypted as a matter of course. Is that the case (or how do I tell if it is)? If it is by default encrypted, then is there a default password before you have entered any specific pin or swipe pattern , etc?
Another question: When TWRP asks for a password, what exactly does it want to do? Does it want to decrypt the data for it's own operations (so just a twrp-level decryption) or does it actually want to completely decrypt partitions? If so, why? Is that the only way TWRP can work these days with default encrypted platforms?
Thanks.
hachamacha said:
Yes, it was the first thing I did. After receiving the 3t, I skipped over all the prompts (to avoid entering accounts, waiting for sw upds and to not enter passwords) and went to software updates and allowed the 3.5.3 update to occur.
Then I did the things described above.
-----
In the interests of my trying to understand everything I'm reading about 6.x and encryption. I'm getting the drift that phones with 6.x + are encrypted as a matter of course. Is that the case (or how do I tell if it is)? If it is by default encrypted, then is there a default password before you have entered any specific pin or swipe pattern , etc?
Another question: When TWRP asks for a password, what exactly does it want to do? Does it want to decrypt the data for it's own operations (so just a twrp-level decryption) or does it actually want to completely decrypt partitions? If so, why? Is that the only way TWRP can work these days with default encrypted platforms?
Thanks.
Click to expand...
Click to collapse
Flash stock recovery, install stock 3.5.3 zip, flash TWRP beta 3 and then SR4. I went through same problem and this got me in(would accept my phone password. )
ghettopops said:
Flash stock recovery, install stock 3.5.3 zip, flash TWRP beta 3 and then SR4. I went through same problem and this got me in(would accept my phone password. )
Click to expand...
Click to collapse
Is that the TWRP beta 3 from the TWRP thread? I thought I saw it mentioned in there. Thanks.
I've done the rest once so will give beta 3 a shot before I resign myself to putting the whole thing back together. Not that big a deal I suppose. I finally realized (after reading quite a bit) that 6.x + comes encrypted and that all versions of TWRP don't handle it right, so I suppose there's no easy way around it. (I'm wondering about this link I happened upon: https://www.androidexplained.com/oneplus-3-fix-twrp-restore-unlock-bug/ )
hachamacha said:
Is that the TWRP beta 3 from the TWRP thread? I thought I saw it mentioned in there. Thanks.
I've done the rest once so will give beta 3 a shot before I resign myself to putting the whole thing back together. Not that big a deal I suppose. I finally realized (after reading quite a bit) that 6.x + comes encrypted and that all versions of TWRP don't handle it right, so I suppose there's no easy way around it. (I'm wondering about this link I happened upon: https://www.androidexplained.com/oneplus-3-fix-twrp-restore-unlock-bug/ )
Click to expand...
Click to collapse
Yes page 9 or 10 OP gives me a link
The solution for me:
I received this reply in the TWRP thread in Development from the OP:
Quote:
Originally Posted by jcadduono
try setting a non-pin password on boot in your OS, like, an actual password, this should convince 3.5.3 to rewrite your crypto key in working format
then see if that new password works on twrp
if it does, you can probably set it back to pin and the pin might start working in twrp
if it doesn't, let me know
-----------------------
Yes, that completely fixed the entire mess and thanks to everyone else for their suggestions. Funny that I never had noticed the word "password" in the security settings, so I tried pin.
Now I've got an encrypted 3t with working TWRP, makes backups, tried a restore and f2fs, no real changes from stock aside from adding TWRP, picking a password, etc.
This seems to happen when you've got the fingerprint method enabled with PIN or password for that matter.
My experience:
I update from Oxygen 4.1.6 to 4.1.7 with TWRP and something went wrong because the phone stuck in bootload for more then half hour.
I've reboot and it appeared 'Encryption Unsuccessful' and it locked my phone. I tried to go to TWRP and it required the password that was 'default_password' but after it not allowed me to mount data and it seemed that there weren't any data in my phone.
I couldn't wipe, format or install other rom because I received error like 'unable to mount X'.
I've solved downloading the Oxygen Recovery and with a USB OTG, flashing it on my phone (with 'mount image' in TWRP).
I rebooted in Oxygen Recovery and it also asked me the password. I've just pushed 'Forgot password' and it formatted my phone.
The phone rebooted without problems (and without any data :\)
Hope to be useful for someone else in my same situation
You can get back in, without loosing any Data.
Go to TWRP
Choose Advanced
Select Terminal
Type this commands:
Code:
dd if=/dev/zero of=/dev/block//bootdevice/by-name/misc
reboot
Use Android again
I encountered this problem after I updated TWRP to version 3.2.1-0.
I regularly update my rom with TWRP and had never been prompted to enter a pin/password before. My lock screen pin was not accepted.
Seems this issue is a bug in a number of TWRP versions. I fixed it by flashing back to version 3.1.1-2. You can download and flash from a list of historical TWRP versions in Android by downloading the official TWRP app, so I didn't need to mess around sideloading it. Rebooted into TWRP, straight in, no problems.
astralbee said:
I encountered this problem after I updated TWRP to version 3.2.1-0.
I regularly update my rom with TWRP and had never been prompted to enter a pin/password before. My lock screen pin was not accepted.
Seems this issue is a bug in a number of TWRP versions. I fixed it by flashing back to version 3.1.1-2. You can download and flash from a list of historical TWRP versions in Android by downloading the official TWRP app, so I didn't need to mess around sideloading it. Rebooted into TWRP, straight in, no problems.
Click to expand...
Click to collapse
Same problem on one of my 3Ts, the other is working with the Oreo based TWRP.
Oreo based Red Wolf Recovery is working: https://forum.xda-developers.com/oneplus-3/oneplus-3--3t-cross-device-development/recovery-red-wolf-recovery-project-t3805416
These things are weird:
1. Why does one 3T work, but not the other 3T ?
2. Why does (Oreo based) Red Wolf Recovery work?
3. Why is OOS Beta 29 able to decrypt Data perfectly?
I assume it's a decryption related bug in Oreo based TWRP.
im stuck not able to get twrp to see any of my storage and i cant get into twrp twice in a row, so if i fastboot and flash twrp thru adb and then boot into twrp, it asks me for the password, if i hit cancel it just shows 0 storage. ive tried to go to adb sideload but it just sits there. I have the backup i made thru twrp before trying to update.
SourPower said:
im stuck not able to get twrp to see any of my storage and i cant get into twrp twice in a row, so if i fastboot and flash twrp thru adb and then boot into twrp, it asks me for the password, if i hit cancel it just shows 0 storage. ive tried to go to adb sideload but it just sits there. I have the backup i made thru twrp before trying to update.
Click to expand...
Click to collapse
What exactly is it you're trying to do? What TWRP are you using? What ROM?
You sound surprised that you can't see your Storage when you haven't entered a Password to Decrypt? That is, after all, what it's supposed to do. What security have you set up on your phone? Did you have Boot time security?
With so little useful information to go on it's hard to help. I'd recommend trying Red Wolf Recovery in any case. It's magic at solving many issues.
Sorry lol what happen was I was updating to latest stable oos, and had standard encryption set up. I wipes caches, and flashed latest rom, then magisk and again twrp (which I should not have) and then my phone had a quick reset. From there it was locked with twrp, neither my pin or default_pw worked so I just formated my phone, after copying data and important things to PC. Everything is good now just had to waste my own time.
For those of you facing twrp encryption when you set a password on the phone, remove your lock screen password and twrp will no longer be encrypted.
raeee1 said:
For those of you facing twrp encryption when you set a password on the phone, remove your lock screen password and twrp will no longer be encrypted.
Click to expand...
Click to collapse
Not so. I removed the password and TWRP still asks for a password.
hachamacha said:
The solution for me:
I received this reply in the TWRP thread in Development from the OP:
Quote:
Originally Posted by jcadduono
try setting a non-pin password on boot in your OS, like, an actual password, this should convince 3.5.3 to rewrite your crypto key in working format
then see if that new password works on twrp
if it does, you can probably set it back to pin and the pin might start working in twrp
if it doesn't, let me know
-----------------------
Yes, that completely fixed the entire mess and thanks to everyone else for their suggestions. Funny that I never had noticed the word "password" in the security settings, so I tried pin.
Now I've got an encrypted 3t with working TWRP, makes backups, tried a restore and f2fs, no real changes from stock aside from adding TWRP, picking a password, etc.
Click to expand...
Click to collapse
This did not work for me.
When I tried reinstalling Stable OxygenOS 4.1.6, the phone locks up upon install and setup screen. This goes for previous OS versions, as well. It takes force quits, restarts, and numerous install attempts and the phone still locks up. I tried stock recovery, old and new TWRP versions, all of which are clean installs, Nothing. LineageOS and other Hydrogen based roms still lock up, either at the setup screen, or when I try and activate developer options. Every Rom I tried after activating developer options, it doesn't leave the gear icon in the menu, either. It takes a restart (force quit) for it to show up. Also, WiFi doesn't work. Sometimes when I try and install OxygenOS either by sideloading, or through TWRP, the phone locks up at the wifi setup screen. This goes for every version of OxygenOS I tried. Your advice is appreciated. Thanks.
I had some problems last night while switching back and forth between Beta and stable. I could try to help but I'm not a guru at this, so wait for confirmation if you are not sure.
First I think you need the right TWRP version. 3.1.1-2 is the latest one, but I'm using 3.0.4-1 (flashed stableOOS with it) and everything is back to normal for me.
Try a clean flash of stableOOS. TWRP > Advanced wipe, select dalvik,cache,data,system and swipe.
Then install the OS. Don't reboot yet, and instead boot into recovery after going back. I read that this ensures you keep TWRP.
It may say No OS installed, but go ahead. Then boot into system again. This worked for me and I restored my backups
I just went from beta 10 to 4.1.6 and have no issues at all.
I followed the basic procedure, in TWRP (recommend to use the latest bluesparks one from his kernel thread - just TWRP no need for his kernel), I did a factory reset, (in TWRP just swipe to Factory reset from the WIPE screen where it says 'Most of the time this is all you need'), its correct nothing else needed, then flashed the full v416 file, then flashed Magisk 13.2, rebooted to system, that was all. TWRP was not lost with this method.
System booted to stable v4.1.6 and no issues.
Check what format are your partitions fornatted in. Make sure they are f2fs. Otherwise try the debrick tutorial. It helped me fix a lot of bugs on my 3T.
I tried all of the above, and I'm certain under the right circumstances, your advice would work. In the end, I used the unbrick tool which brought it back to it's original locked state, and I'm still running into issues. I wonder if there's a hardware issue somewhere that was the result of using Beta. The OS boots up and I'm finally able to access developer options, but no WiFi and the phone still refuses to restart or power off unless I do a hard shutdown. I've never seen anything like it. Numerous ROMS, recoveries, and sideload installs using the One Plus Recovery, and it still doesn't work.
Thanks for everyone's input, but I feel like this phone is done.