Database Develop

Magisk or SuperSU?

Just ordered my new phone, after testing iphone for half a year. But I miss the freedom of Android so 3T is my new phone. [emoji4]
But just wondering, I need root and now there is two ways to do that. Which one is preferred? Always used SuperSU before but I need to hide root for certain apps?
Sent from my iPhone using Tapatalk

Best combination for me is Magisk + MagiskSU. Used SuperSU in the past, but today, I enjoy the freedom of systemless modding and Magisk is perfect for this. Also you can't hide root - properly (at least didn't work for me) -
with SuperSU. With Magisk I even pass SafetyNet.

dreinulldrei said:
Best combination for me is Magisk + MagiskSU. Used SuperSU in the past, but today, I enjoy the freedom of systemless modding and Magisk is perfect for this. Also you can't hide root - properly (at least didn't work for me) -
with SuperSU. With Magisk I even pass SafetyNet.
Click to expand...
Click to collapse
SuperSU is also closed source. Unacceptable for an app which manages the root access of apps. There are a few more downsides of SuperSU which made me switch to an open source solution.
Sent from my ONEPLUS A3003 using Tapatalk

I've used both SuperSU and MagiskSU. They're both good solutions, but for my current setup and requirements I prefer MagiskSU.

How can I pass safetynet? I am using Magisk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ONEPLUS A3003 using Tapatalk

Wrong thread. There's one about Safety Net...

dreinulldrei said:
Wrong thread. There's one about Safety Net...
Click to expand...
Click to collapse
Sei nicht so streng [emoji14]
Sent from my ONEPLUS A3003 using Tapatalk

English please.

jomolocco said:
How can I pass safetynet? I am using MagiskView attachment 4113206
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Check the link in my signature.

Ok, thx.. Will give Magisk a try.. [emoji4]
Sent from my iPhone using Tapatalk

I can't reach your signature can you send a link please?
ONEPLUS A3003 cihazımdan Tapatalk kullanılarak gönderildi

jomolocco said:
I can't reach your signature can you send a link please?
ONEPLUS A3003 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
Sent you a PM on how to pass.....
I go with magisk it's so much easier and the freedom of being able to hide it to sign into Snapchat and such is great

jomolocco said:
I can't reach your signature can you send a link please?
ONEPLUS A3003 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
You can find a users signature by viewing their profile as well...
If the PM mentioned above isn't enough, here's the link:
https://forum.xda-developers.com/apps/magisk/magisk-magisk-hide-troubleshooting-tips-t3561828

jomolocco said:
How can I pass safetynet? I am using MagiskView attachment 4113206
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Do you use Phh superuser? https://play.google.com/store/apps/details?id=me.phh.superuser
Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk

Hi there,
I am rooted with supersu, using stock rom and just heard of magisk. I would like to switch from supersu to magisk. I followed the guide and it said I only need to install magisk manager, then click on install. However, I did exactly what was said but it just said it installed magisk zip file into sdcard/Magiskmanager. So now what do I do? Do I flash the magisk zip via twrp?
Thanks for reading! :victory:
EDIT:SOLVED

XenRon said:
Hi there,
I am rooted with supersu, using stock rom and just heard of magisk. I would like to switch from supersu to magisk. I followed the guide and it said I only need to install magisk manager, then click on install. However, I did exactly what was said but it just said it installed magisk zip file into sdcard/Magiskmanager. So now what do I do? Do I flash the magisk zip via twrp?
Thanks for reading! :victory:
EDIT:SOLVED
Click to expand...
Click to collapse
hey i want to switch too, can you help me, what did you do?

diego97yey said:
hey i want to switch too, can you help me, what did you do?
Click to expand...
Click to collapse
To switch from SuperSU to MagiskSU:
Full unroot in SuperSU app with boot image restoration.
Flash Magisk zip in TWRP.

Can someone help me? I flashed Resurrection Remix official 5.8.3 and i had root, It does have Magisk installed already, but always i restart my phone Magisk says that phone is not rooted. Why?

Magisk is a step forward - for example you can use root detecting apps on a rooted device like Android Pay or Snapchat

I agree, I switched to Magisk and can run Android pay and everything else works great

[Module] Magisk Call Recorder for Huawei devices

Description
Magisk module to enable call recording on Huawei devices systemlessly. Tested with Huawei P9 (b386) EMUI 5.0.
This makes an icon available on the call screen to record calls:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Recordings are saved to /sdcard/record (or external SD Card if available), with filename [email protected]_date.amr:
Download
v1.2: View attachment Magisk_Huawei_Call_Recorder_by_Atarii_v1_2.zip
Installation
Flash via Magisk Manager v13 or TWRP
Make a call
Credits
Credits to Blackball for the Call Recorder zip, I (Atarii) wrapped it inside a Magisk module.
Additional
It's been submitted to the Magisk repo here: https://github.com/topjohnwu/Magisk_Repo_Central/issues/131

Nice share ty ? it'll be needed

Work correctly. Thx

Would this work on Nexus 6P with stock Marhsmallow 6.0.1 and Magisk? Thanks

badabing2003 said:
Would this work on Nexus 6P with stock Marhsmallow 6.0.1 and Magisk? Thanks
Click to expand...
Click to collapse
No only for huawei
Sent from my FRD-L09 using Tapatalk

LastStandingDroid said:
No only for huawei
Sent from my FRD-L09 using Tapatalk
Click to expand...
Click to collapse
Thanks for prompt response.
Do you know if there are there any solutions for Nexus 6p on Marshmallow?

Atarii said:
Description
Magisk module to enable call recording on Huawei devices systemlessly. Tested with Huawei P9 (b386) EMUI 5.0.
This makes an icon available on the call screen to record calls:
Recordings are saved to /sdcard/record (or external SD Card if available), with filename [email protected]_date.amr:
Download
v1.2: View attachment 4292447
Installation
Flash via Magisk Manager v13 or TWRP
Make a call
Credits
Credits to Blackball for the Call Recorder zip, I (Atarii) wrapped it inside a Magisk module.
Additional
It's been submitted to the Magisk repo here: https://github.com/topjohnwu/Magisk_Repo_Central/issues/131
Click to expand...
Click to collapse
Hi, I try on my P8 GRA-L09C432B339 but I don't see icon to record calls. what's wrong?

works like charm on my honor 8 pro

Is any chance to do it to work on Huawei P10 with android 8 and Emui 8 on stock rom ? I need this solution...

Is there anybody?

pepe_lodz said:
Is there anybody?
Click to expand...
Click to collapse
Do you try this module???

No i don't try...

pepe_lodz said:
No i don't try...
Click to expand...
Click to collapse
Can you try and write in my topic???

Where ?

yes, its work

- Copying zip to temp directory
- Installing Magisk_Huawei_Call_Recorder_by_Atarii_v1_2.zip
- Mounting /system, /vendor, /data, /cache
***********************************
! /data/magisk isn't setup properly!
! Please install Magisk v14.0+!
***********************************
Failed!
! Installation failed
Anyone got this working on the current magisk

JimZiii said:
- Copying zip to temp directory
- Installing Magisk_Huawei_Call_Recorder_by_Atarii_v1_2.zip
- Mounting /system, /vendor, /data, /cache
***********************************
! /data/magisk isn't setup properly!
! Please install Magisk v14.0+!
***********************************
Failed!
! Installation failed
Anyone got this working on the current magisk
Click to expand...
Click to collapse
What rom you have???
Wysłane z mojego EVA-L09 przy użyciu Tapatalka

@JimZiii This module won't install on Magisk v16.3+ without being updated to the 1500 module template.

Honor 9 Lite
Dear,
not working in Honor 9 Lite

Open Beta 13 is out

Open Beta 13 for OnePlus 7 Pro
Changelog
System
• Optimized the volume adjustment to improve user experience
• Added the missing recording icon in call screen
• Updated Android security patch to 2020.04
• Fixed known issues and improved system stability
Phone
• Added the ringing duration info for missed calls
• Now you can switch your mobile data on phone calls supported with VoLTE
Camera
• Added a feature which can now detect dirt on the camera lens, prompting a quick cleanup for better image and video quality
Click to expand...
Click to collapse
Full Update
Download
MD5: f9ec37cc7205358f9392d27736312592
Update at your on risk. I am not responsible if anything happens to your device or you loose data.

Thanks!
Your Dowland is AA or BA?
Enviado desde mi GM1913 mediante Tapatalk

Walhalla said:
Open Beta 13 for OnePlus 8 Pro
Changelog
Download
Update at your on risk. I am not responsible if anything happens to your device or you loose data.
Click to expand...
Click to collapse
Your post says OnePlus 8 Pro? Typo? ?

Is for BA models
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enviado desde mi GM1913 mediante Tapatalk

H4X0R46 said:
Your post says OnePlus 8 Pro? Typo? ?
Click to expand...
Click to collapse
lol, sorry, I corrected it. My head is already at my new device. Thanks.
kacarot said:
Your Dowland is AA or BA?
Click to expand...
Click to collapse
There is only 1 global beta firmware.

Hello
Envoyé de mon GM1913 en utilisant Tapatalk

Updated but... it completely ruined the screen calibration and in the settings nothing change once switched to vivid, normal etc... ! anyone else ?

Is it an incremental update or a füll Rom?

The posted link is for the full update.

IlD4nX said:
Updated but... it completely ruined the screen calibration and in the settings nothing change once switched to vivid, normal etc... ! anyone else ?
Click to expand...
Click to collapse
Hi. You should make a wipe cache.
Envoyé de mon GM1913 en utilisant Tapatalk

Installed OB13 over OB12 via TWRP.79 and Magisk 20.4.
Fingerprint was activated... No Problems.
greetings rage

nico97470 said:
Hi. You should make a wipe cache.
Envoyé de mon GM1913 en utilisant Tapatalk
Click to expand...
Click to collapse
Need to try... good suggestion !
Edit: yes ! thank you sir !

Does anyone know if the below common way of installing a full beta update works for OB13?
1) Update through system-updates, local upgrade (no reboot)
2) Flash TWRP retention Skript (no reboot)
3) Re-Install Magisk via Magisk, option "after OTA"
4) Reboot
DO NOT USE THESE STEPS UNLESS SOMEONE CONFIRMS THEY WORK!

I tried to download the full beta 13 file using Oxygen Updater 4.2.0. at least 4 times. The file downloaded failed in its verification, saying the file is damaged.
Anyone got a good verifiable file from Oxygen Updater?

die_braut said:
Does anyone know if the below common way of installing a full beta update works for OB13?
1) Update through system-updates, local upgrade (no reboot)
2) Flash TWRP retention Skript (no reboot)
3) Re-Install Magisk via Magisk, option "after OTA"
4) Reboot
DO NOT USE THESE STEPS UNLESS SOMEONE CONFIRMS THEY WORK!
Click to expand...
Click to collapse
Yes - I had failure in re-installing magisk via magisk - but it woks until now
myeepad said:
I tried to download the full beta 13 file using Oxygen Updater 4.2.0. at least 4 times. The file downloaded failed in its verification, saying the file is damaged.
Anyone got a good verifiable file from Oxygen Updater?
Click to expand...
Click to collapse
Yes, just downloaded from system->systemupdate and followed instructions

md5 for full ota file?

Papote3 said:
md5 for full ota file?
Click to expand...
Click to collapse
Mine reads f9ec37cc7205358f9392d27736312592
Sent from my OnePlus7Pro using XDA Labs

lollyjay said:
Mine reads f9ec37cc7205358f9392d27736312592
Sent from my OnePlus7Pro using XDA Labs
Click to expand...
Click to collapse
Ok that makes sense now because on the oxygen updater app they have another md5 that wasnt matching the downloaded file.

Papote3 said:
Ok that makes sense now because on the oxygen updater app they have another md5 that wasnt matching the downloaded file.
Click to expand...
Click to collapse
Yes, I noticed that. So I downloaded twice and compared the md5s.

Is anyone else getting a double tap sort of sound from Camera modules when opening the camera app?
Happening with both Gcam and OP camera since I updated to OB13.

OxygenOS 10.0.10 [EU] and 10.3.7 [India & Global] for the OnePlus 7 Pro

OnePlus Forum Post
*Both official and mirror links now available*
Changelog
System
Optimized the user experience of the status bar in the call scene to reduce mis-touches
Updated GMS package to 2020.08
Updated Android Security Patch to 2020.11
Fixed small probability flashback issue with Phone app
EU
10.0.10 EU now on Oxygen Updater
Official : https://oxygenos.oneplus.net/OnePlus7ProOxygen_21.E.31_OTA_031_all_2011052309_ce04356d7bed40f8.zip
Mirror : https://www.androidfilehost.com/?fid=10763459528675590798
My Android 10 Collection : https://www.androidfilehost.com/?w=files&flid=296897
GLOBAL
10.3.7 GLOBAL now on Oxygen Updater
Official : https://oxygenos.oneplus.net/OnePlus7ProOxygen_21.P.31_OTA_031_all_2011052258_42a665d7dc95490e.zip
Mirror : https://www.androidfilehost.com/?fid=10763459528675591505
My Android 10 Collection : https://www.androidfilehost.com/?w=files&flid=296897
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

10.3.7 global is now available on oxygen updater as of today

dipleg said:
10.3.7 global is now available on oxygen updater as of today
Click to expand...
Click to collapse
Yep, woke up to a notification this am.
Anyone tried it yet? I borked my phone the first time I tried to do an OTA, had to completely reset and start from scratch, and I know it was a thing I did so I'm a little leery of doing any OTAs even though I've done one since without any problems.

Installed 10.3.7 today. Everything is working fine except magisk fails safetynet check. Tried magisk uninstaller + new install but no luck.

fonebone2 said:
Installed 10.3.7 today. Everything is working fine except magisk fails safetynet check. Tried magisk uninstaller + new install but no luck.
Click to expand...
Click to collapse
Passes just fine for me. Do you have magisk hide enabled? It's disabled by default now. If you do and it still fails, you might have a mod that's making it fail.

H4X0R46 said:
Passes just fine for me. Do you have magisk hide enabled? It's disabled by default now. If you do and it still fails, you might have a mod that's making it fail.
Click to expand...
Click to collapse
Yep, that did it. Thanks!
Sent from my GM1917 using Tapatalk

Updated OP with Global build : https://androidfilehost.com/?fid=10763459528675591505

fonebone2 said:
Yep, that did it. Thanks!
Sent from my GM1917 using Tapatalk
Click to expand...
Click to collapse
Gladly! [emoji4] Yeah it's a weird decision for Magisk dev to make, but it's good to know!

Psychlone said:
Yep, woke up to a notification this am.
Anyone tried it yet? I borked my phone the first time I tried to do an OTA, had to completely reset and start from scratch, and I know it was a thing I did so I'm a little leery of doing any OTAs even though I've done one since without any problems.
Click to expand...
Click to collapse
Yeah man I'm on 10.3.7 now with latest magisk and edxposed, working flawlessly and passing basic eval safetynet

OP updated with official links.

dipleg said:
Yeah man I'm on 10.3.7 now with latest magisk and edxposed, working flawlessly and passing basic eval safetynet
Click to expand...
Click to collapse
Thanks, I took the leap (it's not really, just my own head holding me back) and everything works just fine.
Crazy how one bad experience can cause trepidation.

can anyone share boot.img of 10.3.7 ?
planning to change kernel.

fairyshacker said:
can anyone share boot.img of 10.3.7 ?
planning to change kernel.
Click to expand...
Click to collapse
Sendspace.com Mobile File
www.sendspace.com

Okay, I want to just go into TWRP, wipe data and system, flash a zip, flash twrp, reboot to twrp, flash the rom again, twrp, then magisk.
I'm coming from crDroid 7.x (Android 11),: on a GM1915. What are the chances that this will actually work?
I have the ability to plug into a computer with the phone in edl mode and use msm tool, but I would rather not go home, fire up my computer, flash, and come back out. Though obviously if this fails, that's exactly what I'll be doing to unbrick my phone lol

agentfusion said:
Okay, I want to just go into TWRP, wipe data and system, flash a zip, flash twrp, reboot to twrp, flash the rom again, twrp, then magisk.
I'm coming from crDroid 7.x (Android 11),: on a GM1915. What are the chances that this will actually work?
I have the ability to plug into a computer with the phone in edl mode and use msm tool, but I would rather not go home, fire up my computer, flash, and come back out. Though obviously if this fails, that's exactly what I'll be doing to unbrick my phone lol
Click to expand...
Click to collapse
Did it work fine?

Hi guys, i have the 1917 global with 10.3.7 can i flash the EU 10.0.2??? Thanks

Magisk manager/app refuse to open after *recent* update.

Hey so I realized that Magisk won't open after update v22 if im not mistaken. It just opens, asks to do a "full installation", when I press ok it does some stuff in the background and closes asking to restart the app over and over. I'm confused why this happens as Magisk has worked previously.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have a samsung galaxy note 4 (snapdragon) with a custom rom running on android 10.

goto magisk github and download magisk v22 apk manually then install it usually when that error box show it open google chrome but on your case it didn't ...

oh upon reinstalling it, it seems like the app "works" now for the most part but I have a new issue. I have lost root access and can't manage to get it working back. I flashed the apk in my recovery as the instruction said, according to twrp logs everything installed properly (didnt exit with any error codes) and after I rebooted my phone Magisks detected the installed state as N/A.
Any idea why?

N1PE said:
oh upon reinstalling it, it seems like the app "works" now for the most part but I have a new issue. I have lost root access and can't manage to get it working back. I flashed the apk in my recovery as the instruction said, according to twrp logs everything installed properly (didnt exit with any error codes) and after I rebooted my phone Magisks detected the installed state as N/A.
Any idea why?
Click to expand...
Click to collapse
so previously you have magisk fully working but decided to update Magisk to v22 then now it just show N/A on Installed?

ineedroot69 said:
so previously you have magisk fully working but decided to update magisk to v22 then now it just show N/A on Installed?
Click to expand...
Click to collapse
yeah pretty much, didn't notice there was an issue after installing at first since I only occasionally use root for few miscleanous stuff

N1PE said:
yeah pretty much, didn't notice there was an issue after installing at first since I only occasionally use root for few miscleanous stuff
Click to expand...
Click to collapse
since its say N/A you need to reinstall it like from the beginning

what do you mean, I already uninstalled the app and tried reflashing it like 5 times

N1PE said:
what do you mean, I already uninstalled the app and tried reflashing it like 5 times
Click to expand...
Click to collapse
https://i.pinimg.com/236x/77/19/e2/7719e28b56018268fff940a8c1f49afc.jpg
how did this happen anyway? so you are running magisk then installed update 22.0 did you follow the changelog? it say you need to disable Magisk Hide before upgrading to v22.0

oh I think I might not have disabled it, either ways when I updated to v22 I just casually installed it like any other updates so far...

N1PE said:
oh I think I might not have disabled it, either ways when I updated to v22 I just casually installed it like any other updates so far...
Click to expand...
Click to collapse
you're still lucky since your device is still in working conditions there are user who completely bricked there device and force to buy new one since they can't fix the bootloop cause by Magisk 22.0 for not reading the changelog ...

ohhhh wait I fixed it, there were 2 Magisk manager apps somehow so after uninstalling the older one, everything works normally now

N1PE said:
ohhhh wait I fixed it, there were 2 Magisk manager apps somehow so after uninstalling the older one, everything works normally now
Click to expand...
Click to collapse
https://i.pinimg.com/750x/55/d8/3c/55d83c65008c4b856758fffc64efe39e.jpg

thank you so much for your time, I have one last question though: how do I close a thread/mark as solved/ or archive it.
I'm new to XDA so don't really know

N1PE said:
thank you so much for your time, I have one last question though: how do I close a thread/mark as solved/ or archive it.
I'm new to XDA so don't really know
Click to expand...
Click to collapse
you can't

ineedroot69 said:
you're still lucky since your device is still in working conditions there are user who completely bricked there device and force to buy new one since they can't fix the bootloop cause by Magisk 22.0 for not reading the changelog ...
Click to expand...
Click to collapse
Solving the same issue as OP right now. Can't see about disabling magisk hide in the changelog, am I at the right page? https://topjohnwu.github.io/Magisk/changes.html
EDIT: nevermind, found it: https://topjohnwu.github.io/Magisk/releases/22000.html
Anyway is there a way how to disable Magisk Hide without Magisk Manager?

Hello I have the same problem. I Updated magisk to 23.0 without disabling the hide magisk. Root seems to be lost , NA indicated in magisk. Magisk manager no more available. I can't see any magisk manager installed anywere. I did you succeed to remove one magisk manager ? Using which tool ? I use a redmi note 9 pro

A bit of a necro, so I won't tag the OP, but when something is resolved, you can either Edit the OP, or choose the three-dots in the upper-right corner of the OP, and choose Edit, and then add the tag:
[SOLVED]
in front of the current thread title.
The poster can additionally Report the OP and ask that the thread be closed, if necessary.
Cheers!