So here is my problem,
When I play music or a video (say on youtube) on max speaker volume as much as my device limit, after a while volume automatically lowers down.If I check sound panel, it still shows all volume maxed out.It took a while to get back to original max volume.
Any help would be appreciated:fingers-crossed:
actually that happens whe any notification sound occurs as i face it too
i fix it by sending myslelf a normal msg to make the sound again and make it loud and then i silent my mobile
yograjfire18 said:
actually that happens whe any notification sound occurs as i face it too
i fix it by sending myslelf a normal msg to make the sound again and make it loud and then i silent my mobile
Click to expand...
Click to collapse
While mine actually happens even when no notification are there.
It is irritating. Thanks for the help.
Btw isnt there any permanent solution?
SuperSaket said:
While mine actually happens even when no notification are there.
It is irritating. Thanks for the help.
Btw isnt there any permanent solution?
Click to expand...
Click to collapse
install pixel experience rom to get some of that good ol' google love
I too face this. Mostly happens when the track is paused but several times, it happens for just no reason.
SuperSaket said:
So here is my problem,
When I play music or a video (say on youtube) on max speaker volume as much as my device limit, after a while volume automatically lowers down.If I check sound panel, it still shows all volume maxed out.It took a while to get back to original max volume.
Any help would be appreciated:fingers-crossed:
Click to expand...
Click to collapse
I've seen this happen on my phone as well, but only on the hooq app. Right now, the only fix for this seems to be to close the app by swiping it away from recent apps or force close it altogether.
Related
Hi all ,
there is any chance to increase the volume of the speaker ?
he is very weak.. (and his volume is on maximum)
tweak or smting will help.
thanks !
No tweaks really available for this. There are like one or two tricks (one of which requires hacking your phone up) that apparently work.
Look around, there are tons of threads in regards to this topic.
Yes the speaker is crap on the diamond. Sooner or later you will get used to it and live with it
do not forget that you have three volume settings.
first system volume, second ringtone volume and third incall volume.
the last you can only set during a call. when in a call, turn on your screen and then press the volume up button. now you can change the volume during a call.
for me this fixed al the volume problems.
offcourse if you want to use your speaker for handsfree or as an mp3 player: don't. the speaker is not intended for this use and you will just irritate people around you. use a headphone instead.
Vector-SS said:
No tweaks really available for this. There are like one or two tricks (one of which requires hacking your phone up) that apparently work.
Look around, there are tons of threads in regards to this topic.
Yes the speaker is crap on the diamond. Sooner or later you will get used to it and live with it
Click to expand...
Click to collapse
thanks.
you can direct me to the threads , i didnt found them :\
thanks again
sandervanzijl said:
do not forget that you have three volume settings.
first system volume, second ringtone volume and third incall volume.
the last you can only set during a call. when in a call, turn on your screen and then press the volume up button. now you can change the volume during a call.
Click to expand...
Click to collapse
I also thought that the volume during a call is way too low despite having the volume at maximum. Since I installed Phone Weaver which lets you control the incall volume via profiles it blows my ears away. Last time the speaker was too loud during the call but I couldn't turn it down with the volume keys?! It only changed the master (system?) volume but not the incall. What did I wrong?
I have found that the loud-speaker volume is very low during movie playback, what setting deals with this?
Use Advanced Config and enable all Audio Booster options. This maybe helps...
Also Diamond Tweak, maybe disable 100 db Sound Limitation...
However, these are I think for headset, I haven't tried if they affect the external speaker.
One thing that works for sure is setting equalizers to max in In Core player, but I don't know if the core player works on Diamond...
Don't you love it how I actually haven't helped you at all?
I am gonna test all these and edit this post ))))))
simcarloc said:
I have found that the loud-speaker volume is very low during movie playback, what setting deals with this?
Click to expand...
Click to collapse
Increase the volume of the movie player if its not already 100%?
Personally my speaker is very loud. During calls, at around 50% volume its still so loud I have to keep it a little from my ear.
murks_muell said:
I also thought that the volume during a call is way too low despite having the volume at maximum. Since I installed Phone Weaver which lets you control the incall volume via profiles it blows my ears away. Last time the speaker was too loud during the call but I couldn't turn it down with the volume keys?! It only changed the master (system?) volume but not the incall. What did I wrong?
Click to expand...
Click to collapse
i think you have to be in the phone menu. when i press the volume during a call, it changes the call volume. maybe phone weaver assigns a different function to you volume button.
murklor said:
Increase the volume of the movie player if its not already 100%?
Personally my speaker is very loud. During calls, at around 50% volume its still so loud I have to keep it a little from my ear.
Click to expand...
Click to collapse
Coreplayer shows volume at 100% already, but the volume is so low I can barely hear a thing...
Anyone? It's weird because when I put calls on loudspeaker it's fine, but when playing a movie it's inaudible...
incident said:
thanks.
you can direct me to the threads , i didnt found them :\
thanks again
Click to expand...
Click to collapse
Here you go:
http://forum.xda-developers.com/showthread.php?t=418580&highlight=speaker
http://forum.xda-developers.com/showthread.php?t=408776&highlight=sound
http://forum.xda-developers.com/showthread.php?t=411727&highlight=sound
the solution for your problem is on the following video:
http://www.youtube.com/watch?v=8lJoelghkH8
think carefully before doing this
This is rediculous.. but apparently winmo doesnt allow you to play music while the phone is set to vibrate...
Is there any way I can get around this?
I dont want my phone ringing in the middle of class, and I dont want to risk forgetting to switch my phone back into vibrate after i finish listening to music.
In all honesty i dont see how this will be possible. I understand your issue however the X1 is effectively cutting off all sound from the unit, pretty much like hitting MUTE on your desktop/laptop master. I could understand if third party software could get around this but i just tested out youtube player for example and good as gold it cut the sound right off whilst on vibrate.
I dont think there will be a solution for this to be honest...i hope im proven wrong though, sure there will be a genius on here with an answer
Maybe I really am just asking for too much. But all of my previous feature phones allowed playback through headphones in vibrate mode. And if no headphones were plugged in, the device asked if I wanted to continue and playback music through the speakers anyway (while keeping vibrate mode active).
i may be a bit confused about your question.
im not sure but your phone shouldnt ring on your phone outlet speaker with headset plugged in.
i guess you can make a null ring tone....
I noticed this the other day in class also. I put my phone on silent and went to the music player and it wouldn’t give any sound to the headphone, the only way was to put the volume back up but this meaning if any one text or rang your phone the class would all hear.
I hope there is a solution for this
one fix is in the volume setting ( the one that pops up when you press volume up or down), turn the phone setting all the way down... you wont hear your phone ring but you can still play music.
another way is to just set the phone ring setting to just vibrate mode only. (haven tried it tho yet as no need for me too but just trying to offer solutions). lots of options in the setting, sound notification menu.
it might not be a one touch solution but i think it can be set up to the way you want it too.
I dont have a solution but I gotta ask... listening to music in class???? At the risk of sounding old fogeyish (I cant believe the spell checker let that word through) shouldnt you be listening to the teacher/lecturer?
Wait, can't you put the ringer on vibrate, but keep the system sound on? That's what I would do. I use the touch audio control so when I use the volume rocker I can switch between ringer and sytem.
Shadowdh said:
I dont have a solution but I gotta ask... listening to music in class???? At the risk of sounding old fogeyish (I cant believe the spell checker let that word through) shouldnt you be listening to the teacher/lecturer?
Click to expand...
Click to collapse
No no you missed the point.
I'd listen to music on the way to school. Then I'd turn off the bluetooth once i was done listening. Heres is the problem, once i turned off the bluetooth headset i use, the phone returns to normal sound mode, and is free to ring during class if I forget to switch it back to vibrate.
And I guess I could just manually switch everything to vibrate, but on the weekends I like being able to hear my phone ring.
I'll just have to change the phone to and from vibrate mode when i listen to music I guess...
Why don't you set the ring volume to 0% (don't press silent or vibrate, just set the ring volume down) and leave the system volume where you want it?
Works without problems here.
Nippero said:
No no you missed the point.
I'd listen to music on the way to school. Then I'd turn off the bluetooth once i was done listening. Heres is the problem, once i turned off the bluetooth headset i use, the phone returns to normal sound mode, and is free to ring during class if I forget to switch it back to vibrate.
And I guess I could just manually switch everything to vibrate, but on the weekends I like being able to hear my phone ring.
I'll just have to change the phone to and from vibrate mode when i listen to music I guess...
Click to expand...
Click to collapse
Oh I did indeed misunderstand... apologies...
skycamefalling said:
Why don't you set the ring volume to 0% (don't press silent or vibrate, just set the ring volume down) and leave the system volume where you want it?
Works without problems here.
Click to expand...
Click to collapse
Does setting ring volume to 0% make the phone vibrate?
Cause not hearing any ringing or getting any vibrating might be just as bad XD
Shadowdh, I was being a bit vague/mixed up, so the fault is mine. No need for apologies
Nippero said:
Does setting ring volume to 0% make the phone vibrate?
Cause not hearing any ringing or getting any vibrating might be just as bad XD
Shadowdh, I was being a bit vague/mixed up, so the fault is mine. No need for apologies
Click to expand...
Click to collapse
dude you haven't even tried it and yet you already commented on it .heh
the answer is NO it doesn't set to vibrate not just yet. if you click you're speaker icon on your top left screen(almost) it will pop you up a volume panel which consist of left: the system sound and the right: the phone speaker sound consists of six levels each top most being the highest and bottom being 0%. then below a setting of 3 radio buttons for ON, VIBRATE, and OFF.
now setting the right slider to bottom most and setting the left slider on top most gives you full system sound but 0% phone speaker sound. the radio button is autonatically still at ON and not VIBRATE by then. that is your only choice so far.
another problem afterwhich is, you won't hear any phone ring whenever someone calls you up even through your earpiece. that's just darn. I guess it's just a winmo device problem aprt from your previous phones. SEs I guess.
things SE didn't consider to take a look coz SE people lifestyles are music, camera,and or business and or both.
one more thing, when you turn your volume maxed up. you phone will ring even when the earpiece is plug. there's just no setting to turn it off. I mean for silent users who lstens to music by earphones, most of the time they like it that the speakers are just off and every sound just goes by the earphones. There is simply no setting for that.
in previous model of SE's whenever you plug an earpiece and the phone recognizes it. the phone automatically turns to headphone mode, which utilizes only the earphone as the source of sound and nothing else UNLESS specified in the settings. there has been an issue that users forget to unplug their earpieces that they misses x number of calls the whole night while their phone vibrate silently on their bags or table with their earpieces plug. That is the reaon SEs newer models after k750i I think coz I got a k750 and a w800i which is consecutively released. the w800i and so forth features a earphone mode setting but their phone speakers still rings as well as sounds when an sms goes in even if the earpieces are plugged, without a setting to disable it.
It just the way it is, and some people still need that feature. Like me. I don't want people to hear my phone ringing in public places like a market, street at dawn or related areas. Whenever I wanted to listen to music when someone calls, send an sms, the phone just simply sounds off, publicly.
Another comment/workaround a read is a null tone. Might work, but you have to manually set a null tone for calls, as well as for SMS. without any automation like a uh NULL profile perhaps.
Nippero said:
Does setting ring volume to 0% make the phone vibrate?
Cause not hearing any ringing or getting any vibrating might be just as bad XD
Click to expand...
Click to collapse
I've set my phone to always ring AND vibrate on incoming calls (so I recognize incoming calls even if the music in my living room is very loud ). So if I decrease the ring volume to 0% it does vibrate.
this is like saying i wanna close my eyes and still be able to see something.
As a more lateral solution, have you tried using something like SPB Phone Suite to set either manual or time based profiles?
I'm thinking you could have something like a travelling profile with bluetooth on and sound on and a school one with the phone/system on vibrate and bluetooth off. You could then either change manually with two clicks of the home screen or have it change automatically dependant upon time.
ill always use flightmode! easy and safe...
skycamefalling said:
I've set my phone to always ring AND vibrate on incoming calls (so I recognize incoming calls even if the music in my living room is very loud ). So if I decrease the ring volume to 0% it does vibrate.
Click to expand...
Click to collapse
i do it this way too when i´m in school^^
skycamefalling said:
Why don't you set the ring volume to 0% (don't press silent or vibrate, just set the ring volume down) and leave the system volume where you want it?
Works without problems here.
Click to expand...
Click to collapse
the problem I encounter here is that phone calls are muted and it's great, but it will still ring through the speaker if an sms is received
any solutions?
this makes it impossible to listen to music at quieter (and most usually boring) places!
Possible Solution
I'm not sure if this works on the ROM you're using, but I'm using Touch-IT 3.5 and it allows me to automatically put the phone on vibrate during appointments.
You could set your classes as appointments and not need to worry about it from then on.
Has anyone noticed text tones are VERY low? I tried the system standard ones, and also dowloaded a few from Zedge and also used tone picker...NO MATTER WHAT at full volume I can barley hear when I get a text unless I am right next to the device (it is extremley low). I have the system volume on Max also. Anyone else experiencing this? I need to be able to hear my phone when I get a text, what an incredible feature that would be!
Go into settings, then Sound and Dispay, then click on Ringer volume. There are different sliders there for ring volume and notification volume. If your notification volume there isn't at max, just slide it up to where you want it. Otherwise, I dunno why it's so quiet for you.
ant1171984 said:
Has anyone noticed text tones are VERY low? I tried the system standard ones, and also dowloaded a few from Zedge and also used tone picker...NO MATTER WHAT at full volume I can barley hear when I get a text unless I am right next to the device (it is extremley low). I have the system volume on Max also. Anyone else experiencing this? I need to be able to hear my phone when I get a text, what an incredible feature that would be!
Click to expand...
Click to collapse
Yes, I know this is an old thread. But I have a similar problem but with a different setting. I'm running cognition 2.3b8 with Froyo.
My volumes are not as loud as how they were in Stock Eclair-but this isn't the problem. The may issue now is that notification volume tend to reset to low its low level as hard as I tried to increase it to max. This happens once I receive a message from my mobile service provider - like checking my credit balance and so.
Does anyone else have the same issue?
juliobahar said:
Yes, I know this is an old thread. But I have a similar problem but with a different setting. I'm running cognition 2.3b8 with Froyo.
My volumes are not as loud as how they were in Stock Eclair-but this isn't the problem. The may issue now is that notification volume tend to reset to low its low level as hard as I tried to increase it to max. This happens once I receive a message from my mobile service provider - like checking my credit balance and so.
Does anyone else have the same issue?
Click to expand...
Click to collapse
yep...even i get the same problem when i run any USSD code....the notifications volume lowers down to minimum...any solutions to it?
neo_31591 said:
yep...even i get the same problem when i run any USSD code....the notifications volume lowers down to minimum...any solutions to it?
Click to expand...
Click to collapse
I have the same exact problem that USSD code resets the notification volume back to its low levels.
It seems an issue affecting many other galaxy users, searching for a solution got me no where.
It seems that this USSD sound volume issue is solved with some of the new modded ROMs. Now my phone doesn't produce a sound when I receive ussd feedback.
It is good in a way that a don't need sound notification for that & so system sound volume won't get needed up.
I tried perception, phoenix, serendipity, and now on firefly
Sent from my SGH-I897 using XDA App
I usually keep my phone on silent. Even so, when I get a WhatsApp message notification for example, the volume from Spotify temporarily decreases. This is quite annoying, and it's why I have the phone on silent in the first place.
Is this normal? I haven't tested it with other apps yet.
Thank you!
I have the same issue. Did you solve it or does anyone know how to do so?
Received my note 2 weeks ago and love it. Having a little issue though not sure if is just limited to me. When ever i switch my SOUND to VIBRATE or MUTE then switch back to SOUND, the system returns all the sound settings to its original volume percentage EXCEPT for the ringer volume, its like defaults back to 5%/10%. In a sense, I keep getting missed calls after that. Is this a bug? Anyone else having the same issue? or have a solution to resolve this?
Much appreciated, thank you.
LitoNi said:
Received my note 2 weeks ago and love it. Having a little issue though not sure if is just limited to me. When ever i switch my SOUND to VIBRATE or MUTE then switch back to SOUND, the system returns all the sound settings to its original volume percentage EXCEPT for the call volume, its like defaults back to 5%/10%. Is this a bug? Anyone else having the same issue? or have a solution to resolve this?
Much appreciated, thank you.
Click to expand...
Click to collapse
I did notice that this morning though nothing of it. Also I think mine is faulty.
If I am in a call and put it on to loudspeaker and start using my phone at the same time I'm getting all I can explain as noise pops from the top speaker
Sorry I should clarify that the ringer volume doesnt jump back to its respective volume percentage, it says at 5% and makes me miss my calls everytime.