I'm from Egypt and i need help to upgrade my ALE-21 to Marshmallow my build number is ALE-21C185B130 , bootloader unlocked i've tried to install b170 and b188 but always gets failed installation , i'm totally beginner and don't have much knowledge about this stuff please help me out.
I couldn't post a picture of the model and buildnumber tho ..
http://forum.xda-developers.com/showthread.php?t=3309796
Hey guys,
I got a big problem. I bought a p8 Liste With b181 Firmware and flashed the 6.0Version. Now i cant roll back or root or flash a different firmware. Has anyone a TWRP backup for the Single SIM phone?
Thanks a lot
Greetings from Germany
I have same problem.
check your model number once... do you have BalongCxxx instead of ALE-XX YYYY?
Hello.
I am new to everything related to Huawei and I have a small doubt please.
I have a Huawei P9 Lite 2017 PRA-LX1 (exactly the same phone and specs as P8 Lite 2017; just a different name used by Huawei for marketing and regional purposes).
I have recently updated the build number through the inbuilt Huawei system update to version B162.
Please note that this was only a 400MB update with very minor changes and it was not a full ROM installation. Please see attached screenshot.
I am going to unlock the bootloader, TWRP and root very soon. I read that on the forum that sometimes people have to flash the original version of the build number when their phone gets soft or hard bricked in order to recover their phone.
I wanted to download the original build number as safety in case something goes wrong.
I can't remember the build number I had previously to B162.
1. How would I find the original build number I was on when I bought the phone? Only through a factory reset?
2. Is it really necessary the original build number to recover my phone (if needed one day) or another build would work?
Sorry but I find this Huawei updating method rather complicated or confusing.
Thanks in advance for any advice.
Factory reset don't work because it will same build that you on now. Perhaps if you install firmware finder you can see previous builds
Enviado do meu PRA-LX1 através de Tapatalk
LUNARIO said:
Factory reset don't work because it will same build that you on now. Perhaps if you install firmware finder you can see previous builds
Enviado do meu PRA-LX1 através de Tapatalk
Click to expand...
Click to collapse
Thank you for the answer.
I do have Firmware Finder installed but as I mentioned I did not memorise the previous build number so I would not know which one to look for.
I suppose that if I search for build number B162 (my current updated version) it would work in case I need to flash the original version if any problems arise.
Correct me if I am wrong.
Also in relation to my question #2 any idea please?
Thank you so much.
droidbits said:
Thank you for the answer.
I do have Firmware Finder installed but as I mentioned I did not memorise the previous build number so I would not know which one to look for.
I suppose that if I search for build number B162 (my current updated version) it would work in case I need to flash the original version if any problems arise.
Correct me if I am wrong.
Also in relation to my question #2 any idea please?
Thank you so much.
Click to expand...
Click to collapse
I have honor 4x(different phone, but this part of the phones might be same).
I think FULL firmwares from firmware finder can be flashed in TWRP and in that case you'll only need to worry about getting the firmware which has the same specs as your phone.
TWRP dosen't do any version checking so you don't need to find exactly correct version.
I don't know will this work, but if you get stuck it's good to know.
keikari said:
I have honor 4x(different phone, but this part of the phones might be same).
I think FULL firmwares from firmware finder can be flashed in TWRP and in that case you'll only need to worry about getting the firmware which has the same specs as your phone.
TWRP dosen't do any version checking so you don't need to find exactly correct version.
I don't know will this work, but if you get stuck it's good to know.
Click to expand...
Click to collapse
Yes it is good to know I will be able to flash any version as long as it is for PRA-LX1.
With some other phone brands I had in the past downgrading was out of the question (LG G3 and G4 for example).
Not sure about Huawei in relation to downgrading.
My opinion is that this should be all standardised all across Android anyway and not all different between phone manufacturers.
Thanks for your reply.
basically the only thing you need to look at is C432 in the firmware number
Carkai said:
basically the only thing you need to look at is C432 in the firmware number
Click to expand...
Click to collapse
Thanks a lot!
You MAY find your original build number according to your region:
https://mobiletech360.co/huawei-p8-lite-2017-stock-firmwarerom-android-7-nougat-pra-lx1/
But even if you do i doubt that you can revert it back, I had a PRA-LX1C464 which is the region code for Turkey, I wanted to update it through Firmware Finder and successfully did. But it changed my phone' build number to PRA-LX1C432, and I can't revert it back to C464. My phone is single SIM, but the firmware I'm using is dual SIM (wtf huawei? ) . So far so good though, phone works fine.
marstonpear said:
You MAY find your original build number according to your region:
https://mobiletech360.co/huawei-p8-lite-2017-stock-firmwarerom-android-7-nougat-pra-lx1/
But even if you do i doubt that you can revert it back, I had a PRA-LX1C464 which is the region code for Turkey, I wanted to update it through Firmware Finder and successfully did. But it changed my phone' build number to PRA-LX1C432, and I can't revert it back to C464. My phone is single SIM, but the firmware I'm using is dual SIM (wtf huawei? ) . So far so good though, phone works fine.
Click to expand...
Click to collapse
Hi. How did you change build number ? Thanks
SPiX69 said:
Hi. How did you change build number ? Thanks
Click to expand...
Click to collapse
You need to rebrand your phone aka flash another oeminfo that is related to your device. This will lock your bootloader, so make sure you are on stock EMUI first, flash the new oeminfo (make sure it belongs to your device), go to erecovery and restore your device, this will wipe all your data and download the firmware of the oeminfo you flashed. You can unlock your bootloader afterwards.
Hey i need Stock recovery p10 lite was-lx2c636b130 or b172(latest). I try to find like crazy but didnt found it. Please anybody. I try to search in team mt firmware finder, lots of forums! Or if i can get a stock recovery only then i can full update it to b172. But the problem is i need to remove twrp so i can do ota update on my phone. Isit possible if another stock recovery p10 lite replace to my current firmware? Btw my firmware is c636 (asia pacific) and from malaysia. I hope i can full update because i accidently factory reset through twrp that makes my huawei launcher broken. :crying:
I have p9 phone with build number EVA-L09C627B160
I can't find a way to root, install twrp or custom rom.:crying:
Anyone know a way play help me