I want reflash a stock rom to my SM-T815, but i get a fault. The Rom is T815XXU2CRA3_T815DDX2CQI1_DTM with Odin 3.12.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Erase...
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After that i can flash TWRP without any Problem. Can somebody help me to bring the Stock rom in my Tab?
Related
<OSM> N7000DDLP8_N7000ODDLP5_N7000DDLP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.img
<ID:0/007> NAND Write Start!!
<ID:0/007> factoryfs.img
after this odin is doing nothing
plzzz help
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G800FXXU1ANFF_G800FXEO1ANF3_G800FXXU1ANFF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
//
where I can find pit file for G800F
knox , after fail flash still loaded bad
Hello all
I m trying to flash 5839i ROM downloaded from sammobile but no way error :
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> BcmCP.img
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Check ODIN Version
i3abaji said:
Hello all
I m trying to flash 5839i ROM downloaded from sammobile but no way error :
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> BcmCP.img
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
This normally should not happen but you should download the odin 3.07 and the .ops file for your model ONLY. Attach the .ops file in your reply. Choosing an incorrect .ops file will result in a brick:crying:
thanks going to try with odin 3.07 and will let you know here! thanks in advance
im on infinity pro 8 rom
this is the stock rom i want to flash.
while trying to flash stock rom i get this:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
its stuck at the downloading mode. cant boot to twrp, it would just take me to a error page when i reboot and it says:
An error has occurred while updating the device software. Use the emergency recovery function in the smart switch pc software. i tried that but nothing happen.
Been trying to root this phone for awhile and I get many to different errors I finally fixed most errors but now I get this Error on odin every time I try to use the .tar if I use the regular AP file the process goes trough even if I downgrade to android 12 no problems, as soon as I use the magisk tar it gives error on both android 11 and 12 the weird thing is it will go trough with regular AP file I got this samsung recently and I usually jailbreak IPhones, its my second time rooting the first phone I had, had no issues like this also I cant for the life of me enable OEM unlock I tried different ways or tutorials and no luck can anyone help me or do I have to wait the seven days for oem to unlock its self, magisk says Ramdisk Yes also I also get a vbmeta error on the phone with the .tar using magisk this is the error and the one that succeeded. I have also tried the patchd versions and the newest version of odin gives me the sha256 only Odin3 v3.14.1_3B_PatcheD works and that's the one that gives me the error using the tar without tar and regular AP it works.
WITH TAR AS AP USING MAGISK :
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 9002 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> preloader.img
<ID:0/007> lk-verified.img
<ID:0/007> param.bin
<ID:0/007> up_param.bin
<ID:0/007> efuse.img
<ID:0/007> uh.bin
<ID:0/007> vbmeta.img
<ID:0/007> recovery.img
<ID:0/007> super.img
<ID:0/007> userdata.img
<ID:0/007> audio_dsp-verified.img
<ID:0/007> dpm-verified.img
<ID:0/007> vbmeta.img
<ID:0/007> dtbo.img
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
WITH REGULAR AP :
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 9002 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> preloader.img
<ID:0/007> lk-verified.img
<ID:0/007> param.bin
<ID:0/007> up_param.bin
<ID:0/007> efuse.img
<ID:0/007> uh.bin
<ID:0/007> vbmeta.img
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> super.img
<ID:0/007> userdata.img
<ID:0/007> audio_dsp-verified.img
<ID:0/007> dpm-verified.img
<ID:0/007> vbmeta.img
<ID:0/007> dtbo.img
<ID:0/007> gz-verified.img
<ID:0/007> spmfw-verified.img
<ID:0/007> scp-verified.img
<ID:0/007> sspm-verified.img
<ID:0/007> tee-verified.img
<ID:0/007> tzar.img
<ID:0/007> mcupm-verified.img
<ID:0/007> pi_img-verified.img
<ID:0/007> cam_vpu1-verified.img
<ID:0/007> cam_vpu2-verified.img
<ID:0/007> cam_vpu3-verified.img
<ID:0/007> misc.bin
<ID:0/007> vbmeta_system.img
<ID:0/007> md1img.img
<ID:0/007> cache.img
<ID:0/007> omr.img
<ID:0/007> prism.img
<ID:0/007> optics.img
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)