Related
My market always says starting download, But never actually starts. It HAS worked, and my connection is fine, but its really finicky.
Anyone else experiencing this?
//from the nook
Think lots of people see this behavior ... and actually it seems that while it looks like it's not DLing, it actually is ... try this ... click on an app you want ... the market will ask if you want to install, after you say OK it goes back to the market .. click again on the app you are DLing and watch for a minute .. it'll probably display that it is now DLing and it seems it really was all along. Also this is not 'repeatable' .. sometimes it behaves this way, other times it goes straight to DLing ... have this same behavior on my Froyo phone and a small android tablet.
I used to have this issue and HTC had no idea about it. Realised that if you have the low disk space icon showing in your notification bar, market will not download or update any applications until the issue of space is sorted.
Hope it helpa
Sent from my HTC Desire using XDA App
Thanks for replying.
Nothing seems to be working. Pandora and jorte Have been starting to download for over 12 hours. My disk space is fine so that can't be the issue. I feel like its connection based in some way, but I have no evidence of that.
//from the nook COLOR
So I jumped on market help just now and this is a very common issue. The fix is just signing or resigning into to gTalk. Weird but it worked immediately after I defrosted and reboot.
//from the nook COLOR
Start downloading in the market only hang on my NC when there's a low on disk space notification even though there's 100MB left. When I clear some addition space, the downloading resume.
My NC was acting the same way last night. Marketplace downloads took forever and many times it would say "download paused". Dolphin HD and default browser were both super slow loading pages if they loaded them at all. I checked the Wireless and it seemed to be "cycling" between "Connected to the Internet" and "Connected, testing...." every 5 to 10 seconds. I managed to load Speedtest and my download rate was 50 Kbps or less. My Samsung Fascinate sitting right beside the NC was hitting close to 1Mbps on Speedtest over WiFi.
So I started backing out the apps I've installed, no change. Frustrated, I end up doing a hard reset to reload the system partition and deregister to clear everything else. So now I'm back to bone stock and it's 1:00 am, still NO CHANGE!! WiFi is still super slow to non-existent
Needless to say at this point I'm a tad irritated with the NC. I box NC up thinking it must have some type of wireless defect and plan on taking it back to Best Buy since I just bought it 3 days ago.
For some reason I decide to check out the Barnes and Noble website thinking it's a long shot they'd have any answers but what the heck. In the Support forum for the NC I found a thread talking about the NC having issues with WiFi when using WEP security. Not 100% of the time but sometimes. Oh my, I'm using WEP security on a DLink router!! (I know, not the best decision I've every made but certainly not the worst, the ex-wife holds that honor!!)
So I unbox and power up the NC, "Forget" the current wireless connection, turned off the wireless all together and power off the NC. I log into the router and change over to use WPA-PSK security. Power up the NC and turn the wireless back on. It finds the network and shows WPA-PSK security in use. I enter the key and it connects immediately. I open the default browser and poof the Barnes and Noble page loads quick!!!
It's now 2:00am and I'm re-rooting the NC and reinstalling apps. The Market Place and Dolphin HD are now responding like they should. The constant "cycling" between "Connected to the Internet" and "Connected, testing..." has stopped. The NC still cycles between the two but it's not nearly as often.
So I've learned: Don't work on the NC at 1:00am. You'll make rash decisions which will cost you a lot of unnecessary work later on. And, if you're having WiFi issues and using WEP try WPA-PSK instead.
Sorry for the long winded ramble, lack of sleep I guess.
T
TCStehle said:
So I've learned: Don't work on the NC at 1:00am. You'll make rash decisions which will cost you a lot of unnecessary work later on. And, if you're having WiFi issues and using WEP try WPA-PSK instead.
T
Click to expand...
Click to collapse
Or just Mac address filter I have no password on my router but if the devices Mac address isn't on the list they can't even connect to the 192.168.2.1/192.168.1.1 router login stuff.
Not recommended unless you like setting stuff up because anything you plan to use have to be added to the list.
sent from a Nook Color using xda-app
Off topic but it's really easy to spoof a mac address. Still use WPA if you care about security. I personally don't.
Sent from my swype-a-myn-a-calkytalky googly super premium deluxe astounda phone
They can determine valid MACs for your network by simply monitoring the traffic and clone one that you've white-listed.
That's like locking your car door and leaving the windows rolled down.
It's still better than WEP, though.
RoboRay said:
They can determine valid MACs for your network by simply monitoring the traffic and clone one that you've white-listed.
That's like locking your car door and leaving the windows rolled down.
It's still better than WEP, though.
Click to expand...
Click to collapse
Thats with anything tho, if a supa n3rd wants to come sniffer/brute force for hours for wifi they will get it.
But, Especially, since it was about the NOOK not liking WEP/WPA2 Mac address filtering is another option with which ive had no problems plus the no password hassle while still enjoying some security.
Crappy belkin routers never have problems with the NC tho WEP/WPA2 or not.
camwinnn said:
Thats with anything tho, if a supa n3rd wants to come sniffer/brute force for hours for wifi they will get it.
Click to expand...
Click to collapse
Sure, but it's a matter of the effort/reward ratio. MAC-cloning and WEP-cracking is trivial. It can be done in 1 minute. That requires no meaningful effort. Brute forcing for hours obviously requires a considerably greater effort and time expended.
You can see the difference, right?
They're going to go after the low-hanging fruit and then move on to more easy-pickings, not waste time hammering away at WPA2 for hours and hours.
RoboRay said:
You can see the difference, right?
They're going to go after the low-hanging fruit and then move on to more easy-pickings, not waste time hammering away at WPA2 for hours and hours.
Click to expand...
Click to collapse
I guess its all your set up, either its was the PSP or DS but I play soulsilver via wifi an one couldn't manage wpa2 and since wep is bad I'd rather not bother with a password.
Plus if my connection lags a second I look up the dhcp list hourly almost if torrent uploads fall below 250k. It still may be easy access but it would be a pain to get my "fruit"
sent from a Nook Color using xda-app
Hi All,
Just picked up a chromecast however I'm having some initial issues with getting it working.
It connected fine to my Wifi network and then goes to update however the update stays on 0% or 1% until it eventually times out.
Is anyone able to provide information around how the updates work for this device? I'm in New Zealand so I'm curious if there's an issue with Google servers not accepting from my location or something.
If anyone could provide any information that would be great, if there's a better place for this post or if I should be easily able to find this (I did try to search everywhere I could) then I'm sorry.
Kind regards,
Kyo
Kyonz said:
Hi All,
Just picked up a chromecast however I'm having some initial issues with getting it working.
It connected fine to my Wifi network and then goes to update however the update stays on 0% or 1% until it eventually times out.
Is anyone able to provide information around how the updates work for this device? I'm in New Zealand so I'm curious if there's an issue with Google servers not accepting from my location or something.
If anyone could provide any information that would be great, if there's a better place for this post or if I should be easily able to find this (I did try to search everywhere I could) then I'm sorry.
Kind regards,
Kyo
Click to expand...
Click to collapse
Same here +1
would appreciate a reply or solution
Got my Chromecast a week ago. It was setup and working/casting without any problem but since yesterday, a message appeared about updating..."Your Chromecast deserves the best...." and the update screen is stuck at 0%. I have restarted routers, chromecast, reset and tried everything, but after setup it gores to update screen and stays at 0% for hours without any progress.
I am using it in Pakistan. Have tried to search online solutions but found nothing, though I have seen some other people having the same problem.
PLEASE HELP and ADVISE how to go about. I have already tried resetting and factory reset etc.
I just opened the box for chromecast today. The setup went fine. As soon as it was connected, it started the update. It gets to 100% and does nothing else. It just stays on that screen. Anyone else experiencing this?
+1 same issue here.Seems to be affecting Pakistani users.
Maybe because youtube is blocked in Pakistan.
Anyway to manually update device ?
So my chromecast started updating itself a day later, well I never saw it updating but it did. (didn't change anything so not sure why it wasn't working).
Good luck to those others who have the issue.
Any update on this? I'm having the same issue... purchased chromecast yesterday and never got it passed the update screen, remains on zero. Even after leaving on overnight!
Talked with Google last night at midnight, very cool support is open 24/7, but they were unable to help. the one thing they did mention is that the router should be within 20 feet of chromecast! Mine is easily double that, but everything else in the same location works fine; xbox, roku, LG G2, Nexus 7 and my Vizio DLNA and smart apps. I can stream on everything but the chromecast.
Is the chromecast really that weak?
Help?
loaded! said:
Any update on this? I'm having the same issue... purchased chromecast yesterday and never got it passed the update screen, remains on zero. Even after leaving on overnight!
Talked with Google last night at midnight, very cool support is open 24/7, but they were unable to help. the one thing they did mention is that the router should be within 20 feet of chromecast! Mine is easily double that, but everything else in the same location works fine; xbox, roku, LG G2, Nexus 7 and my Vizio DLNA and smart apps. I can stream on everything but the chromecast.
Is the chromecast really that weak?
Help?
Click to expand...
Click to collapse
Are you using the included extender? At times I'd lose network connection and was forced to use it.
wptski said:
Are you using the included extender? At times I'd lose network connection and was forced to use it.
Click to expand...
Click to collapse
Yes, I'm using the extender... I am also using the tv usb to power the chromecast. are there better results with the wall power plug?
loaded! said:
Yes, I'm using the extender... I am also using the tv usb to power the chromecast. are there better results with the wall power plug?
Click to expand...
Click to collapse
Don't think so.
Since your TV has DLNA, you should be able to stream using BubbleUPnP alone providing you also have WiFi on it as well.
Chromecast stuck on 0% updating
I fixed Chromecast stuck on 0% update by rebooting with little button THEN switching the cable box cable to HMI-2. Then plugging Chromecast cable into HMI-1 port on the TV and selecting HMI-1 setting. Chromecast started loading and rebooted itself about 3 times. With-in 6 or 7 minutes it was ready to CAST! Yay finally. It took my 4 hours to figure it out as there were no solutions on the internet blogs.
+1 this! Thank you so much!!
i have searched and read and searched some more and can not come up with anything.
here is my issue, i have a s4a, i have comcast modem with a netgear router, i have streamed pandora on this setup for at least a year or more, occasionally netflix and of course some youtube videos. a few weeks ago i signed up for hulu plus, got a chromecast and went to streaming video from my phone. i watched several shows through the chromcast from my phone as well as a movie on HBOgo. last week sometime something has happened and i can no longer stream anything on my phone, hulu, netflix, hbo, pandora, none of these work, i downloaded cartoon network and it works fine. if i disconnect from my wireless network i can stream all of them, as soon as i connect to wifi "unfortunatly (app) has stopped". i have reset my modem, router, wiped my phone, updated my phone to 4.3, re wiped the phone, and still nothing, as of this moment the only app that i have downloaded on my phone is pandora, and i can not stream when connected to wifi...
if i go anywhere else and connect to their wifi everything works fine... why did my phone all of a sudden stop streaming on my network only?
my wifes iphone works fine with all of the above and connected to the chromecast
any help would be great as i am ready to smash this phone
tp8728 said:
any help would be great as i am ready to smash this phone
Click to expand...
Click to collapse
Nothing comes to mind that wouldn't have been solved by everything you've already done... Maybe you will have to buy a new modem?
Just another random thing that might work... try adding a different Google account to your S4A and downloading the streaming apps through that Google account and see if that solves the issue. I believe that specific Google accounts can be limited by developer's based on an auth code that I think is associated with your Google account. Idk why you might be limited, and it seems extremely coincidental that you would be limited by several different developers/provides at the same time, unless Google is for some reason responsible. Please note that I know little about this particular thing so it's a complete stab in the dark but it just might work.
not sure how or why this worked, but maybe it will help someone in the future.
i decided to scan my available wireless networks in range from my phone again.... (not because i was going to mooch from a neighbor ) and noticed that my neighbor had a network labeled "lastname" and "lastname guest".
that got me thinking and reading about my router, i found out that i could set up a "guest" network as well, set it up, connected my phone and only my phone and everything works again, i have no idea why or what happened but it works for now
I have used 1Weather for a long time without any issues. Lately I have noticed that the radar takes 15 -25 seconds to load, even though the map and present location load immediatley. I have noticed this on my Nexus 6, my Nexus 5x, Samsung 10.1 G5210, and Samsung SGS III --- all running different android versions.
Have contacted 1weather but they say they do not experience this.
So - can some of you install 1weather, and tap the map icon at the bottom to see how fast/slow your radar loads? I am in OKC area if you think that weather data feeds for this area might have something to do with it.
Or any other ideas - wifi speeds are excellent otherwise
SOLVED - Thanks to all who posted and made suggestions. It turned out to be the wifi router (ASUS). I went down to the AT&T store and tried their wifi - 1Weather loaded fast and so did radar. Bought another router (Netgear) and 1Weather worked properly. Some setting on the ASUS router (on or off I don't know) was the culprit - but I think it had something to do with parental control, because I initially had same problem on Netgear. Then I turned on parental control but did set it to block nothing and that did the trick. Have no idea why, but it's working now. May re-hook up the ASUS to see if there's a similar setting to turn on/off
1weather Google Play Link
I'm in the Dallas area and mine loads quickly. I also have some locations in New England and they load fast too.
At least you got a reply from them. I emailed them a question a week or two ago and they never answered.
I have the app and my Radar seems to load very fast.
I am in the DC-VA-MD area.
So I hate to say, but the problem might actually be with the area where you live.
Mine loads fine as well on Android Marshmallow and Android Nougat. You may consider clearing cache or at the very worst data and resetting up the app if problems persist.
misfitpierce said:
Mine loads fine as well on Android Marshmallow and Android Nougat. You may consider clearing cache or at the very worst data and resetting up the app if problems persist.
Click to expand...
Click to collapse
I have actually done that and also rolled back to a previous version...with no success.
I did change my router to a dual band router, but am pretty clueless as to 95% of the settings.
So since you mention the router, are you saying on mobile data it loads fine?
misfitpierce said:
So since you mention the router, are you saying on mobile data it loads fine?
Click to expand...
Click to collapse
No I have checked that as well. But interesting is that it loads the "still" radar first on mobile, not the animated one. It loads the animated one on wifi 1st.
Well it sounds like your wifi is working fine regardless if data is coming through and its just this app and the fact that its happening on mobile data too confirms its not the router settings. All I can think of is check permissions under the app settings, make sure its got the location access
(im sure it does) as well as storage permissions. Other than that if I cant replicate it then all someone can really suggest is uninstall/reinstall. The storage permission is to cache map data for radar which should be what makes it load faster.
misfitpierce said:
Well it sounds like your wifi is working fine regardless if data is coming through and its just this app and the fact that its happening on mobile data too confirms its not the router settings. All I can think of is check permissions under the app settings, make sure its got the location access
(im sure it does) as well as storage permissions. Other than that if I cant replicate it then all someone can really suggest is uninstall/reinstall. The storage permission is to cache map data for radar which should be what makes it load faster.
Click to expand...
Click to collapse
Thanks for the comments. I'm gonna try it at the local AT&T store on 1 of their phones, if they'll allow it.
I wonder if it has something to do with the data source of the radar in my area? Oh well, will keep searching
If thats the case try setting it manually to a diff location. You could try 33411 for example which is in florida.
Just a suggestion...if nothing else works...you might want to try another app such as
Radar Now
https://play.google.com/store/apps/details?id=com.usnaviguide.radar_now
I use 1weather and it loads radar very fast on wifi and even faster on LTE. Gotta be a conflict with something else on your device.
Sent from my Nexus 6 using XDA Free mobile app
SOLVED - see edit in OP
Hi, I've been trying to chromecast for the last few days. I came from a Nexus 6p which worked 100% with chromecast. If i use the web browser and try to cast from a video channel, it never connects to my chromecast or TV (with chromecast built in). I've tried the mirroring option but it never finds a chromecast. I've downloaded Google Home, that seems to have a bug where i can't login to my google account from my P20 Pro.
I've looked online and on here and haven't seen any other posts on it. It would be good to test. I am on the Dual Sim Three UK 8.1.0.102 (C782) variant.
Thanks
It has worked flawlessly using local cast app.
I've always found Google home glitchy.
Sent from my CLT-L29 using Tapatalk
Works flawlessly for me. I've had the P20 Pro since release and I've never had a problem using a Chromecast, although I did recently factory reset my Chromecast, so that may have fixed any issues.
I use Chromecast several times a day, and haven't noticed anything odd.
I'm using Chrome browser to play web-videos and the Google Home app to mirror the screen.
Haven't used the built-in cast/mirror feature, but that has never worked reliably for me on any device
Thanks all, i wonder what is happening here. Even the Google home app isn't working. It's like an authentication error in the app. Chromecast doesn't connect to either of my chromecast devices. Works fine on my old phone still. I wonder if it's my firmware. I am on .102 which i know is really old. Waiting for Three/Huawei to update...
ianarg said:
Thanks all, i wonder what is happening here. Even the Google home app isn't working. It's like an authentication error in the app. Chromecast doesn't connect to either of my chromecast devices. Works fine on my old phone still. I wonder if it's my firmware. I am on .102 which i know is really old. Waiting for Three/Huawei to update...
Click to expand...
Click to collapse
I'm on 102 and it works.
Sent from my CLT-L29 using Tapatalk
Chromecast mostly works for me. The only thing that doesn't is volume controls from screen off. Apart from that, and the few normal Chromecast glitches, it works well.
I'm casting NFL Gamepass from my P20 Pro to my Nvidia Shield as I type this, it's worked flawlessly whenever I've tried since I got my phone (mine is also dual SIM from Three).
This works very sporadically for me, often from apps that cast (excluding Netflix and YouTube which have a different mechanism for Chromecast discovery) it's as if the refresh devices button doesn't really trigger a proper refresh.
The Google home app often doesn't show my Chromecasts but if I keep it open and wait maybe 5 minutes they'll eventually show.
Anyone seen anything like this?
I had problem with NBA game time app, it didn't display the cast icon after update of the device to .107 but iwas probably due to the implementation of an old. Chromecast API from NBA app itself. After NBA has updated the app is working perfectly
I streamed YouTube to a chromecast this evening without any problem, worked like expected...
No issues here, sounds more like a network issue to me.
fregor said:
No issues here, sounds more like a network issue to me.
Click to expand...
Click to collapse
Have you guys tried it with apps other than youtube or netflix?
Those work fine for me but they use a different discovery method, see here;
actually... I can't post links but googling "netflix different chromecast discovery" and going to the google developers discovery troubleshooting confirms this.
Network is also ruled out for me as it's still working flawlessly on my old phone and my wife's phone.
I cast all the time from Plex so it's super annoying not being able to find the chromecasts for 10 minutes and the closing apps/G Home, rebooting etc trying to trigger a discovery.
Cheers,
Jon
Oh a further update to my theory of "the refresh/scan isn't working as it should"
I have a CC that turns off when the TV is turned off and this sometimes appears in the list of devices for hours after it's been turned off, like overnight.
I've tried a factory reset but it didn't help, it's across multiple apps so maybe something to do with discovery in the android discovery software itself?
I wish all the apps just used their own discovery like YT/NF.... grumble, grumble...
Further update...
I'm 90% sure this is due to some overly aggressive power saving. I've also noticed the BBC news widget doesn't update as much as it should.
Today I tested resetting a Chromecast and attaching it as a new one. Didn't work. Needed to use another device to get it set up with Google home. Not ideal. Be interesting to see if anyone else can attach a new Chromecast after factory resetting one if anyone fancies some troubleshooting for me?
Go on, be a pal.
Cheers,
Jon
Works flawlessly in streaming from playmovies to casting the screen
I stream from plex or YouTube to a chromecast without problem
Damn... Maybe it's just some devices or a firmware issue then.
I'm on 8.1.0.103, have you a later one? Might be stuck waiting for an update
JonMoore87 said:
Damn... Maybe it's just some devices or a firmware issue then.
I'm on 8.1.0.103, have you a later one? Might be stuck waiting for an update
Click to expand...
Click to collapse
I'm on .107 firmware, I never tried older ones.
Im also experiencing some problems with chromecast. Basically, some apps, like spotify, sometimes does not show my chromecasts under devices available.
After some tests, I think it is something related to the wifi strength and wifi+. If I disable the sim data, magically all the chromecasts around my house are correctly detected.