Database Develop

TUTORIAL - Huawei P8 Lite Android 6.0 Marshmallow B574 Root

Files:
1. BETA-SuperSU-v2.62: https://download.chainfire.eu/747/SuperSU/
2. SuperSU in System-Mode [v2.76-STABLE]: http://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
Process:
1. Flash TWRP 3.0.2 via ADB
2. With TWRP flash BETA-SuperSU-v.62
3. Turn off the phone
3. Again run TWRP and flash SuperSU in System-Mode [v2.76-STABLE]
4. Reboot the phone
That's all. Your bootloader must be unlocked!

These mega links are down. Please update OP.

bumjrah said:
These mega links are down. Please update OP.
Click to expand...
Click to collapse
Updated now!

30 sec, done. Crazy... THX

Fine fine fine! YOU are my pleasure!
Everything work like a charm for me!
ThX a LoT from dirtyOldGermany

link . BETA-SuperSU-v2.62 is dead
please re-up

Why first Beta-SuperSU e poi Stable-SuperSU and not direct SuperSU 2.76?

Dominus Et Deus said:
Files:
1. BETA-SuperSU-v2.62: https://download.chainfire.eu/747/SuperSU/
2. SuperSU in System-Mode [v2.76-STABLE]: http://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
Process:
1. Flash TWRP 3.0.2 via ADB
2. With TWRP flash BETA-SuperSU-v.62
3. Turn off the phone
3. Again run TWRP and flash SuperSU in System-Mode [v2.76-STABLE]
4. Reboot the phone
That's all. Your bootloader must be unlocked!
Click to expand...
Click to collapse
Just a question: Is this procedure for a specific reason? What are the differences between the others and this one?
Thanks in advence

Root
Hi.I have B575 build number,can I root or will I have a bootloop?
Thanks!

AlinM. said:
Hi.I have B575 build number,can I root or will I have a bootloop?
Thanks!
Click to expand...
Click to collapse
you can root
---------- Post added at 04:11 PM ---------- Previous post was at 04:10 PM ----------
staska_lt said:
you can root
Click to expand...
Click to collapse
but first boot after installing can take up to 30min

staska_lt said:
you can root
---------- Post added at 04:11 PM ---------- Previous post was at 04:10 PM ----------
but first boot after installing can take up to 30min
Click to expand...
Click to collapse
Are you sure,cause I dont wanna **** my phone?

AlinM. said:
Are you sure,cause I dont wanna **** my phone?
Click to expand...
Click to collapse
yes, do you have twrp?

Does this work on b854?

Does this work on chinese firmware? ALE-UL00?

[request] oeminfo.img for pralx1c432

I want the single Sim oeminfo.img for my p8 lite 2017 to install single Sim fw. Firmware could be Pralx1c432b169 and so on. Can you help me?

Wire1122 said:
I want the single Sim oeminfo.img for my p8 lite 2017 to install single Sim fw. Firmware could be Pralx1c432b169 and so on. Can you help me?
Click to expand...
Click to collapse
In page 3 there is the new download link. It is a dual sim oeminfo but there if you read a little about it it works exactly fine on a single sim variant too.
https://forum.xda-developers.com/p8...ussion/request-pra-lx1-oeminfo-t3581091/page3
Hope it helped

Ok, but to install a single Sim fw?

Wire1122 said:
Ok, but to install a single Sim fw?
Click to expand...
Click to collapse
It's your choice. In a normal situation that should work too

Can you explain it? I must flash oeminfo through twrp and then?

Wire1122 said:
Can you explain it? I must flash oeminfo through twrp and then?
Click to expand...
Click to collapse
Steps:
1. Download the latest full pra-lx1c432 firmware. - If you don't have it, download it from here: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
2. Download huawei update extractor. -If you don't have it, download it from here: https://forum.xda-developers.com/showthread.php?t=2433454
3. Extract UPDATE.APP using HUE. You can find it inside the firmwire zip you just downloaded.
4. Using fastboot, you will need to flash: System, boot, recovery. (Move them to the adb location)
4. - This will take some time
a. fastboot flash system system.img
b. fastboot flash boot boot.img
c. fastboot flash recovery recovery.img
Now if you done, do a factory reset with stock recovery.
Your phone is now stock again.

GedeonTaylor said:
Steps:
1. Download the latest full pra-lx1c432 firmware. - If you don't have it, download it from here: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
2. Download huawei update extractor. -If you don't have it, download it from here: https://forum.xda-developers.com/showthread.php?t=2433454
3. Extract UPDATE.APP using HUE. You can find it inside the firmwire zip you just downloaded.
4. Using fastboot, you will need to flash: System, boot, recovery. (Move them to the adb location)
4. - This will take some time
a. fastboot flash system system.img
b. fastboot flash boot boot.img
c. fastboot flash recovery recovery.img
Now if you done, do a factory reset with stock recovery.
Your phone is now stock again.
Click to expand...
Click to collapse
not working only bootloop

Wire112233 said:
not working only bootloop
Click to expand...
Click to collapse
Maybe something is not working how it should. Then connect to a usb cable which is plugged into you computer and hold vol up and pwr button. If you did it correctly now you are in erecovery. Download the latest. If it says it can't download then you are missing something..!

GedeonTaylor said:
Maybe something is not working how it should. Then connect to a usb cable which is plugged into you computer and hold vol up and pwr button. If you did it correctly now you are in erecovery. Download the latest. If it says it can't download then you are missing something..!
Click to expand...
Click to collapse
right but downloading b170 rom. I want b171 single sim not b170 dualsim

GedeonTaylor said:
Steps:
1. Download the latest full pra-lx1c432 firmware. - If you don't have it, download it from here: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
2. Download huawei update extractor. -If you don't have it, download it from here: https://forum.xda-developers.com/showthread.php?t=2433454
3. Extract UPDATE.APP using HUE. You can find it inside the firmwire zip you just downloaded.
4. Using fastboot, you will need to flash: System, boot, recovery. (Move them to the adb location)
4. - This will take some time
a. fastboot flash system system.img
b. fastboot flash boot boot.img
c. fastboot flash recovery recovery.img
Now if you done, do a factory reset with stock recovery.
Your phone is now stock again.
Click to expand...
Click to collapse
The pra does not tolerate such flash orgies. Or did you test it before posting?

ChinHon said:
The pra does not tolerate such flash orgies. Or did you test it before posting?
Click to expand...
Click to collapse
chinhon, can you guides me to correcrly install b171 fw?

Wire112233 said:
chinhon, can you guides me to correcrly install b171 fw?
Click to expand...
Click to collapse
Use the Firmware Finder for this. I have no experience with it, but there are very good instructions at xda.

ChinHon said:
The pra does not tolerate such flash orgies. Or did you test it before posting?
Click to expand...
Click to collapse
Flash : system, boot & recovery image via bootloader ( if its already unlocked ) it should work on any Android devices ... I don't see why here, it should be different

surdu_petru said:
Flash : system, boot & recovery image via bootloader ( if its already unlocked ) it should work on any Android devices ... I don't see why here, it should be different
Click to expand...
Click to collapse
not working, after Huawei logo the smartphone reboot itself such after a factory reset
---------- Post added at 05:21 PM ---------- Previous post was at 05:17 PM ----------
ChinHon said:
Use the Firmware Finder for this. I have no experience with it, but there are very good instructions at xda.
Click to expand...
Click to collapse
not work. On device info only show the security patch to 5 february. The fw version is the same before, so b170
---------- Post added at 05:22 PM ---------- Previous post was at 05:21 PM ----------
ChinHon said:
Use the Firmware Finder for this. I have no experience with it, but there are very good instructions at xda.
Click to expand...
Click to collapse
not work. On device info only show the security patch to 5 february. The fw version is the same before, so b170

ChinHon said:
The pra does not tolerate such flash orgies. Or did you test it before posting?
Click to expand...
Click to collapse
Yes, I did..

surdu_petru said:
Flash : system, boot & recovery image via bootloader ( if its already unlocked ) it should work on any Android devices ... I don't see why here, it should be different
Click to expand...
Click to collapse
The PRA is a mystery. There's usually a brick in this. Often a bootloop. Sometimes it works. That's why I don't like to recommend it. Why I couldn't find out so far and therefore put a rescue rom online

ChinHon said:
The PRA is a mystery. There's usually a brick in this. Often a bootloop. Sometimes it works. That's why I don't like to recommend it. Why I couldn't find out so far and therefore put a rescue rom online
Click to expand...
Click to collapse
I don't understand the PRA myself..I've soft-bricked mine a couple of times and have recovered using different methods and not one foolproof way.

Can I flash stock fw with twrp?

No, unless someone has a backup for you. Take the K-Rom v. 3.3 and make it unroot. Then you have a stock rom.

Hey guys, now it's time for eRecovery!!

Tutorial(downgrade8.1.0=>7.1.1)use nougat stok/custom-roms on Oreo BC-12 bootloader

Tutorial(downgrade8.1.0=>7.1.1)use nougat stok/custom-roms on Oreo BC-12 bootloader
This tutorial is for the users wich are not satisfied by Oreo 8.1.1 rom
Also can be used by users wich changed the touchscreen from some reazons
and on Oreo 8.1.1 this new touchscreen not work​
First got to Settings/System/Developer option and chec OEM-unlockin to be ENABLED!
for flashing twrp-recovery may be need to unlock the bootloader by code but it should work only with OEM-unlocking enabled
Downgrading with FASTBOOT!
1) Charge youre phone to at least 50-70%, better is 100%
2) Download the FILES necessary for downgrading
3) Reboot the phone in bootloader and connect to the pc
4) Opend the terminal and write "fastboot" or "mfastboot" depends by your instaled fastboot
5) Copy/Paste in terminal the lines writed in "fastboot-mfastboot.txt" atached to files
or write them one by one and press ENTER
WAIT 'till it finish
6) In bootloader screen, from buttons vol-up & vol-down navigate and set to "reboot recovery" and press Power
Phone should boot in TWRP-recovery!
Now you have to install a custom-rom or a stok-rom TWRP flashable with Install option
""for this use the instruction to install posted by the developer of each rom""
Also you can RESTORE an older 7.1.1 backup made before update to OREO
Reboot and enjoy by nougat-7.1.1 rom on oreo-8.1.0 bootloader
Downgrading with TWRP
Files to be flashed with TWRP for the users wich have olready the TWRP-recovery instaled!
1) Download the files
2) Copy the zip archive on the sdcard
3) Reboot the phone in TWRP-recovery
4) Search and install the zip
5) Install nougat 7.1.1 rom or restore an older backup made before update to OREO
Enjoy!

reserved

Thank You very much
---------- Post added at 06:02 PM ---------- Previous post was at 05:38 PM ----------
vaserbanix said:
This tutorial is for the users wich are not satisfied by Oreo 8.1.1 rom
Also can be used by users wich changed the touchscreen from some reazons
and on Oreo 8.1.1 this new touchscreen not work​
First got to Settings/System/Developer option and chec OEM-unlockin to be ENABLED!
for flashing twrp-recovery may be need to unlock the bootloader by code but it should work only with OEM-unlocking enabled
Downgrading with FASTBOOT!
1) Charge youre phone to at least 50-70%, better is 100%
2) Download the FILES necessary for downgrading
3) Reboot the phone in bootloader and connect to the pc
4) Opend the terminal and write "fastboot" or "mfastboot" depends by your instaled fastboot
5) Copy/Paste in terminal the lines writed in "fastboot-mfastboot.txt" atached to files
or write them one by one and press ENTER
WAIT 'till it finish
6) In bootloader screen, from buttons vol-up & vol-down navigate and set to "reboot recovery" and press Power
Phone should boot in TWRP-recovery!
Now you have to install a custom-rom or a stok-rom TWRP flashable with Install option
""for this use the instruction to install posted by the developer of each rom""
Also you can RESTORE an older 7.1.1 backup made before update to OREO
Reboot and enjoy by nougat-7.1.1 rom on oreo-8.1.0 bootloader
Downgrading with TWRP
Files to be flashed with TWRP for the users wich have olready the TWRP-recovery instaled!
1) Download the files
2) Copy the zip archive on the sdcard
3) Reboot the phone in TWRP-recovery
4) Search and install the zip
5) Install nougat 7.1.1 rom or restore an older backup made before update to OREO
Enjoy!
Click to expand...
Click to collapse
Also, can I flash Stock Nougat (using fastboot) after this? And is there any chance of my device being hardbricked?

ShattrdChain said:
Thank You very much
---------- Post added at 06:02 PM ---------- Previous post was at 05:38 PM ----------
Also, can I flash Stock Nougat (using fastboot) after this? And is there any chance of my device being hardbricked?
Click to expand...
Click to collapse
No! you cant flash a full nougat rom with fastboot.
Bootloader cant be downgraded!
for hardbricked phones you have first to boot it using the sdcard img.
then when you get bootloader working without sdcard, can use this tutorial
Sent from my Moto G (5S) using Tapatalk

vaserbanix said:
No! you cant flash a full nougat rom with fastboot.
Bootloader cant be downgraded!
for hardbricked phones you have first to boot it using the sdcard img.
then when you get bootloader working without sdcard, can use this tutorial
Sent from my Moto G (5S) using Tapatalk
Click to expand...
Click to collapse
Oh ok. Thank You very much

I successfully rolled back to 7.1 using this method. No errors or issues. Everything worked flawlessly. A big thank you @vaserbanix

What are the problems with 8.1? I'm still on Android 7 (RETEU)

Argon007 said:
What are the problems with 8.1? I'm still on Android 7 (RETEU)
Click to expand...
Click to collapse
1. Oreo Battery drains considerably faster than 7.1. (But charges faster too)
2. Fingerprint unlocks slower than 7.1
3. Lags slightly when doing intensive tasks.

Now we need a maintainer for (a) Nougat rom(s)..

Ænimal said:
Now we need a maintainer for (a) Nougat rom(s)..
Click to expand...
Click to collapse
YES indeed!

Im in 8.1.1 stock rom. Can i install a custom 7.1.2 (ViperOS) with this method? Tks.

mysticauls said:
Im in 8.1.1 stock rom. Can i install a custom 7.1.2 (ViperOS) with this method? Tks.
Click to expand...
Click to collapse
lineage 14.1 work so it should work ViperOS too!
to be sure ask in ViperOS thread.
Thankyou!

Hello!
Do you lose biometrics by installing twrp?

vaserbanix said:
YES indeed!
Click to expand...
Click to collapse
LOS14.1 has been updated:
NEW BUILD: https://www.androidfilehost.com/?fid...63190603848665
Change log: November 18 Security Update
NOTE: Like so many other users, I too updated my device with OREO and stuck with that. I haven't tried downgrading it because I don't want to end up with a hard-bricked device once again. Point here is the new build is not tested. So please take a TWRP backup before using this build. Don't forget to post me even if works fine.
Thanks,
KS
Click to expand...
Click to collapse
EDIT: When I try to quote properly I get logged out for some reason, so see this thread obviously (and don't forget to thank @kalyansundhar ):
https://forum.xda-developers.com/moto-g5s/development/rom-lineageos-14-1-t3727918

Fantastic tutorial, vaserbanix. Thank you!
Does anybody know where can I get a nougat stock rom TWRP flashable? There is a thread with stock roms but all of them are only flashable via Fastboot...
I would like to get this in particular: [MONTANA_NPP26.102-49-14]
---------- Post added at 08:38 PM ---------- Previous post was at 08:13 PM ----------
ShattrdChain said:
I successfully rolled back to 7.1 using this method. No errors or issues. Everything worked flawlessly. A big thank you @vaserbanix
Click to expand...
Click to collapse
Thank you so much for your feedback, ShattrdChain! :good:
May I know what rom did you use for flashing with this method?
And do you know if bootloader needs to be unlocked in order to downgrade with this guide?

TWRP method doesn't work (bootloop), pls fix or delete.

FanderWasTaken said:
TWRP method doesn't work (bootloop), pls fix or delete.
Click to expand...
Click to collapse
i understand it work!
just chek the twrp version!
is posible the twrp to dont read some partitons.
this can make the differences betwen work or not
ask eric rutgers ( @GoldeneyeS2), he instaled sucesful that downgrade.zip
Thankyou!

vaserbanix said:
i understand it work!
just chek the twrp version!
is posible the twrp to dont read some partitons.
this can make the differences betwen work or not
ask eric rutgers ( @GoldeneyeS2), he instaled sucesful that downgrade.zip
Thankyou!
Click to expand...
Click to collapse
Its works great.
You can also use fastboot to downgrade!

can the downgrade be done without the bootloader unlocked?

the methods don't work for xt1799-2!

Persist.img from Mi9, anyone can post it here?

hi all, suddently my rotation sensors stop working on my Mi9, after some flash and reflash's from the firmware i cant get youtube or other apps to rotate...
so im here to ask if anyone with unlocked bootloader and TWRP can make a backup of their Persist partition and post it here, i belive it will help some people with the same problem as me...
thanks in advance.

I will post it in 5 mins...
---------- Post added at 10:47 PM ---------- Previous post was at 10:42 PM ----------
https://drive.google.com/file/d/10c8tS1L96GVQVaGdmMyKExzuoRdLB06e/view?usp=drivesdk
There you go.

TheKsM said:
I will post it in 5 mins...
---------- Post added at 10:47 PM ---------- Previous post was at 10:42 PM ----------
https://drive.google.com/file/d/10c8tS1L96GVQVaGdmMyKExzuoRdLB06e/view?usp=drivesdk
There you go.
Click to expand...
Click to collapse
thank you but...now im facing another problem, i try to flash it via fastboot but fail, no write acess...try flash in TWRP and fail again because i cant mount persist, i didnt see the persist partition after mounting.
well, so i just reflash the whole rom in Mi Flastool but even that way i cant get rotation to work again...im screw'd

Try other twrp versions. Twrp's for mi9 is not so stable. Try another one it should work

same problem here, did you already solve the problem?

rocalino said:
same problem here, did you already solve the problem?
Click to expand...
Click to collapse
Yeah, just flash via TWRP the new update 10.2.30 here on xda, a thread with that file and all is working good now.
Here the link to that flashable zip: http://bigota.d.miui.com/V10.2.30.0...AGlobal_V10.2.30.0.PFAEUXM_82c5904459_9.0.zip
You need to have unlocked bootloader and TWRP of course.

sun_is_shinning said:
Yeah, just flash via TWRP the new update 10.2.30 here on xda, a thread with that file and all is working good now.
Here the link to that flashable zip: http://bigota.d.miui.com/V10.2.30.0...AGlobal_V10.2.30.0.PFAEUXM_82c5904459_9.0.zip
You need to have unlocked bootloader and TWRP of course.
Click to expand...
Click to collapse
After flash it, TWRP would be replaced by the original recovery?
Which wipes did you do before install?

rocalino said:
After flash it, TWRP would be replaced by the original recovery?
Which wipes did you do before install?
Click to expand...
Click to collapse
Dont wipe anything and TWRP will be there if you flash magisk 19.3 after flashing the rom and reboot only when both are flashes, first the rom and then the magisk.
Reboot and after that install some app like powermenu to reboot into TWRP and do it one time and after that you can boot into TWRP the old way, with the volume up and power.

Can you upload the file again?

havlaz said:
Can you upload the file again?
Click to expand...
Click to collapse
Everything you need you can take from fastboot ROM.
https://yadi.sk/d/bcegpWxXYcu8lw
This file from cepheus_global_images_V10.2.13.0.PFAMIXM_20190709.0000.00_9.0_global.tgz official fastboot ROM.

I have problem. I installed xiaomi .eu miui11 beta and wanted to reinstall it on miui mix. I cleared the date, dalvik, cashe and internal memory. After restart, the phone went into fastboot mode and I can't turn on twrp. Help me !!!

kamil456 said:
I have problem. I installed xiaomi .eu miui11 beta and wanted to reinstall it on miui mix. I cleared the date, dalvik, cashe and internal memory. After restart, the phone went into fastboot mode and I can't turn on twrp. Help me !!!
Click to expand...
Click to collapse
Use MiFlash and flash any Rom with option "flash_all.bat".
Let it load to system, then boot into fastboot and flash TWRP again.

I have the same problem, in newer Miui 11 Roms the auto rotation stopped.
What is now todo? Download and install the rom in post #7? After that i had to install the persist.img via fastboot. Ist this right? Thank you for your help.

Herbie17 said:
I have the same problem, in newer Miui 11 Roms the auto rotation stopped.
What is now todo? Download and install the rom in post #7? After that i had to install the persist.img via fastboot. Ist this right? Thank you for your help.
Click to expand...
Click to collapse
You need unlocked bootloader and flash persist.img via TWRP. Links to persist.img in this thread.

Thanks for your help. One more Question, at first i install a new Miui 11 (without working auto rotation) and than via twrp the perist.img?
Wich partotion i had to choose in twrp, boot, dtbo, recovery, System-Image or Vendor Image?
Thanks for an answer
Edit: I installed newest twrp, thtn i can mount persist. I installed persist.img and erverything is fine. Thanks a lot.

Sorry,Can you upload the file again?

Anyone can upload persist.img for Mi 9 cepheus? Thanks a lot

AFiREiNSiDE182 said:
Anyone can upload persist.img for Mi 9 cepheus? Thanks a lot
Click to expand...
Click to collapse
I need too

persist.img
drive.google.com

Các bạn hãy tải file của tôi và dùng Orangefox để flash nhé, tôi đã gặp tình trạng tương tự và đã sửa được
----------
MOD EDIT: English Translation Below
Please download my file and use Orangefox to flash it, I had the same problem and fixed it

How to flash TWRP [Android 11, One UI 3.1] on Samsung A30 (SM-A305F/DS)

Hello everyone!
I have tried several times flashing TWRP with ODIN on my device (Samsung A30), but i get "fail" message on ODIN screen.
I have unlocked Developer Mode and checked OEM unlocking and USB debugging to be active.
Can someone have the time and will to give me a solution in few steps? I want to flash a custom rom after, so i would appreciate your time on responding me!
Regards!

I had this same problem of giving an error in the installation of TWRP, in fact, before installing TWRP, you have to install vbmeta, it is what blocks the installation of TWRP, install it and then install TWRP that will work, download vbmeta disabled, install in AP, then install TWRP and be happy

Thank you man! Going to, one last question, is it going to be flash-able with ODIN or do i need to use another installation method?
Thanks again for your quick response!

@Deivid Soltoski i got the same fail message even when tried to flash the vbmeta disabled...i guess its another way you install it not through ODIN...

alb.boy said:
@Deivid Soltoski i got the same fail message even when tried to flash the vbmeta disabled...i guess its another way you install it not through ODIN...
Click to expand...
Click to collapse
Show log...

And you write your message not there, there is a separate topic for questions

use twrp 3.4

alb.boy said:
Hello everyone!
I have tried several times flashing TWRP with ODIN on my device (Samsung A30), but i get "fail" message on ODIN screen.
I have unlocked Developer Mode and checked OEM unlocking and USB debugging to be active.
Can someone have the time and will to give me a solution in few steps? I want to flash a custom rom after, so i would appreciate your time on responding me!
Regards!
Click to expand...
Click to collapse
you need to unlock the bootloader and oem lock to able to flash modded firmware like twrp

alb.boy said:
@Deivid Soltoski recebi a mesma mensagem de falha mesmo quando tentei fazer o flash do vbmeta desabilitado...acho que é outra maneira de instalar não através do ODIN...
Click to expand...
Click to collapse
Oh no, but if you're having more problems, try downgrading to Android 10, which has fewer problems

tutibreaker said:
you need to unlock the bootloader and oem lock to able to flash modded firmware like twrp
Click to expand...
Click to collapse
I have done that through development mode. But still not working

alb.boy said:
I have done that through development mode. But still not working
Click to expand...
Click to collapse
No you dont, dude search for a guide here and read it

tutibreaker said:
No you dont, dude search for a guide here and read it
Click to expand...
Click to collapse
Will try, thanks though!