Hello everyone, I saw a few posts on this forum about other bricked phones, but my case is different (if its not then please link me the thread, Thanks).
Story: Today I decided that my unrooted phone wasn't enough for me, so I said: "Why not root?" . I have to add that I owned a LG Magna 3G before this Huawei P8 LIte 2017 and oh boi was the rooting procedure WAY HARDER(the huawei procedure)... I did well with my LG, but not so well with my Huawei. To be honest I was almost done but because I couldnt boot into TWRP, I decided to follow a guide I cant find cause I followed so many that my History is a mess (if anyone requests I will do some digging though). The guy suggested to someone that couldnt boot into TWRP (like me) that he should falsh TWRP>relock his OEM>Shutdown>Press a combination to go into recovery mode>???>Profit. I did just that but my device is now a 180 Euro brick.
Probelm: My device bootloops. Every time I shut it down (hold power key for 10sec), it reboots and gets stuck on the famous "Your device has been locked and can't be trusted. To learn more, BLAH BLAH BLAH. Your device is booting now...
I tried several key combinations, but whatever I do, when I hold my power key for 10sec, The huawei logo pops up for a second or two and then I get stuck on this screen again...
Sadly, I seem to have no connection between my PC and my device (adb can't find any connected device).
I also want to add that, after I was promted to relock my OEM, I removed the USB cable whoopsie.
What Im looking for:
A way to regain contact between my PC (adb) and my phone
A way to shutdown my device for now (and not forever... just for the night)
Someone to tell me that he had the same issue and took the following steps (Need clear answers and steps)
Anything else whatsoever
I don't think it's necessary to provide the files I used, since the reason my device is like this is because of my own stupidity:silly:
Thank you for your time.
You have to hold Power and Volume Up button pressed to boot into erecovery, not only power, check it.
grgzz said:
You have to hold Power and Volume Up button pressed to boot into erecovery, not only power, check it.
Click to expand...
Click to collapse
Sorry for replying after 2 hours, I didn't get a notification.
I tried:
1. Holding the buttons until I see the "your device is booting..." message
2.Holding the buttons until it vibrates
3.Holding the buttons until I see the Huawei logo
Thanks for your time anyway
You press Volume Up + Power simultaneously, when you see the Huawei logo you release Power and hold Volume Up only until it boots to erecovery.
grgzz said:
You press Volume Up + Power simultaneously, when you see the Huawei logo you release Power and hold Volume Up only until it boots to erecovery.
Click to expand...
Click to collapse
Tried this several times, no result.
Is there a more drastic solution to my stubborn phone?
Aneom7331 said:
Tried this several times, no result.
Is there a more drastic solution to my stubborn phone?
Click to expand...
Click to collapse
The most drastic solution is the DC Phoenix software, not for free, if i am right they ask 15€ for 72 hours.
Not going to bother with this one tho... if I am very desperate, I might try to "borrow" it, but Im gonna seek other solutions until then.
Thanks for your time
On the "your device has been unlocked" hold the Volume up button until you boot to eRecovery. From there connect to wifi and restore stock rom. Afaik, erecovery should boot on bootlooped device. Give it a try
If this doesnt work, plug in to pc, and hold volume up + power, on huawei logo leave power button and hold volume up until you get to erecovery
aciupapa said:
On the "your device has been unlocked" hold the Volume up button until you boot to eRecovery. From there connect to wifi and restore stock rom. Afaik, erecovery should boot on bootlooped device. Give it a try
If this doesnt work, plug in to pc, and hold volume up + power, on huawei logo leave power button and hold volume up until you get to erecovery
Click to expand...
Click to collapse
Hello, thanks for replying
My device is now good, only gapps are missing but I don't care too much. Here is what happened:
So, I left my phone unplugged from any power source during the night (meanwhile the screen couldn't turn off), although I swear I did this 20 times already, when I booted my device after I came back from my University, my phone booted into eRecovery... I downloaded the latest package and it seems to work just fine now, the only problem is that the gapps need to be flased via TWRP (that I don't think I have anymore, how ironic).
Thanks to all of you who cared about giving me a solution :victory: Have a fantastic day
If you want to have a complete working system, i suggest you to try to update using erecovery again. It should download full firmware with gapps etc
Aneom7331 said:
Hello, thanks for replying
My device is now good, only gapps are missing but I don't care too much. Here is what happened:
So, I left my phone unplugged from any power source during the night (meanwhile the screen couldn't turn off), although I swear I did this 20 times already, when I booted my device after I came back from my University, my phone booted into eRecovery... I downloaded the latest package and it seems to work just fine now, the only problem is that the gapps need to be flased via TWRP (that I don't think I have anymore, how ironic).
Thanks to all of you who cared about giving me a solution :victory: Have a fantastic day
Click to expand...
Click to collapse
aciupapa said:
If you want to have a complete working system, i suggest you to try to update using erecovery again. It should download full firmware with gapps etc
Click to expand...
Click to collapse
Well, that was what we told you to do at first time. Erecovery can bring it back to life easily. Now as you have already been told erecovery flashes the complete firmware, including gapps.
You can also try to update it through the settings menu, in the system update settings you press the three dots menu on the upper right corner and select download latest complete package.
grgzz said:
Well, that was what we told you to do at first time. Erecovery can bring it back to life easily. Now as you have already been told erecovery flashes the complete firmware, including gapps.
You can also try to update it through the settings menu, in the system update settings you press the three dots menu on the upper right corner and select download latest complete package.
Click to expand...
Click to collapse
I know you told me first but, the difference was that, my phone had to ran out of battery to do this. In the end of my last reply I said thanks to all of you who cared, including you, you cared the most actualy
Aneom7331 said:
I know you told me first but, the difference was that, my phone had to ran out of battery to do this. In the end of my last reply I said thanks to all of you who cared, including you, you cared the most actualy
Click to expand...
Click to collapse
Well, at least it works now.
Related
Hi Everyone;
I unlocked my phone for flashing custom rom. After unlocking i reebooted it and was normal. Then i flashed cwm via htc one toolkit. It was successfull as well. Then i go to cwm and made factory reset + wipe cache + dalvik cache. Then i go to install zip from sd card but i could not find my rom file. Thought, it was deleted while unlocking device. Then decided to reboot phone again to copy rom file into the phone and reboot.
But, when i rebooted phone from cwm, it stuck on HTC Logo( Quietly Brilliant screen). Waited sometime, but nothing happened. Then i tried to power off it and boot into bootloader or recovery. I press and hold power button but it does not respond anyhow. When i am holding power button ,back and home buttons are blinking but nothing happens. Almost five minutes i waited as holding down power button but phone does not power off anyhow. i tried all methods like vol down + power, vol up + power and both volume keys + power. But really nothing happens, just blinking back and home buttons. That's all.
I can not simply power off device. :crying:
I also tried boot device via fastboot commands but it says "waiting for device" means computer does not recognize device.
Guys, i need an urgent help. Please...
just keep trying to reboot via holding power or power+vol down. if it doesnt reboot after 30 sec or so let go then try again. if that doesnt work you will have to wait for the battery to die. once you get to bootloader use all in one toolkit to erace cache. then boot to recovery and you rom should be there if not boot back to bootloader and sideload rom
skinsfanbdh said:
just keep trying to reboot via holding power or power+vol down. if it doesnt reboot after 30 sec or so let go then try again. if that doesnt work you will have to wait for the battery to die. once you get to bootloader use all in one toolkit to erace cache. then boot to recovery and you rom should be there if not boot back to bootloader and sideload rom
Click to expand...
Click to collapse
just keep trying to reboot via holding power or power+vol down. if it doesnt reboot after 30 sec or so let go then try again. if that doesnt work you will have to wait for the battery to die. once you get to bootloader use all in one toolkit to erace cache. then boot to recovery and you rom should be there if not boot back to bootloader and sideload rom
Click to expand...
Click to collapse
First thank you for your quick reply. Unfortunatelly, power+vol down does not work at all. Maybe i tried 50 times.
Anyhow, after battery die. How can i boot into bootloader. I mean, can phone be charged again in this situation? Also, even if i manage to boot into bootloader or recovery how can i put custom rom file into phone. Actually, i did not use sideload or whatever you mentioned before.
I am serouisly confused now and don't know what to do.
Anyhow, as you said, firlst i need wait to battery die i think. Then i will report back whats happen.
Thank you again btw.
Blue_Shine said:
First thank you for your quick reply. Unfortunatelly, power+vol down does not work at all. Maybe i tried 50 times.
Anyhow, after battery die. How can i boot into bootloader. I mean, can phone be charged again in this situation? Also, even if i manage to boot into bootloader or recovery how can i put custom rom file into phone. Actually, i did not use sideload or whatever you mentioned before.
I am serouisly confused now and don't know what to do.
Anyhow, as you said, firlst i need wait to battery die i think. Then i will report back whats happen.
Thank you again btw.
Click to expand...
Click to collapse
yes your not the first person with this problem. hold power+vol down to get into bootloader. press power button in bootloader to get in fast boot mode. use all in one toolkit to erase cache and side load rom. i recommend all in one toolkit because it automates the process. just select the option then follow on screen steps
Good to hear that i am not the first person That means somehow there is a solution i beleive. Still waiting for battery die. even i had 50 percent battery at the begining but still it holds on I never say again htc battery is bad
I exeprienced that stucking on boot logo several times before with my other htc phones but holding power + vol down/up worked always. This is the first time for me that i faced with power button can not power off device.. Well, ,i hope i wish i can handle out this problem. Definetley with your help.
Regards,
I am having the same problem and don't know what to do :crying:
Today I just got my One. Unlocked bootloader, rooted, flashed Android Revolution rom. Everything worked fine for a while... I wanted to reinstall the rom because I wanted to change some options in the installer - I did not wipe because it was the same rom (big mistake I guess!!). After making the installation option changes, when it was done it proceeded to reboot but now I am stuck in a white HTC logo boot loop hell... (with the red text at the bottom that says "this build is for development purposes only" etc). Holy crap I never had a phone that I could not remove the battery. I cannot get this back into recovery or ANYTHING, it just keeps looping... computer recognizes it, no problem with drivers or anything it just doesn't stay connected long enough (because of the constant looping) to be able to use the toolkit.
PLEASE any advice?? Can't even shut it down omg. Do I have a $600 brick here? :crying::crying:
Deeva said:
I am having the same problem and don't know what to do :crying:
Today I just got my One. Unlocked bootloader, rooted, flashed Android Revolution rom. Everything worked fine for a while... I wanted to reinstall the rom because I wanted to change some options in the installer - I did not wipe because it was the same rom (big mistake I guess!!). After making the installation option changes, when it was done it proceeded to reboot but now I am stuck in a white HTC logo boot loop hell... (with the red text at the bottom that says "this build is for development purposes only" etc). Holy crap I never had a phone that I could not remove the battery. I cannot get this back into recovery or ANYTHING, it just keeps looping... computer recognizes it, no problem with drivers or anything it just doesn't stay connected long enough (because of the constant looping) to be able to use the toolkit.
PLEASE any advice?? Can't even shut it down omg. Do I have a $600 brick here? :crying::crying:
Click to expand...
Click to collapse
Did you read the other posts in this thread? The way you do a "battery pull" on this phone is to HOLD the PWR + VOL DOWN button for ~15seconds. Your capactivie buttons will blink, too. On my device, it took exactly 15seconds to reboot. There have been some reports of some phones that get so stuck that you just have to wait until the battery dies and charge it back up.
Alternatively, if the computer is recongizing it, try to adb reboot recovery to try and get into the recovery.
Deeva said:
I am having the same problem and don't know what to do :crying:
Today I just got my One. Unlocked bootloader, rooted, flashed Android Revolution rom. Everything worked fine for a while... I wanted to reinstall the rom because I wanted to change some options in the installer - I did not wipe because it was the same rom (big mistake I guess!!). After making the installation option changes, when it was done it proceeded to reboot but now I am stuck in a white HTC logo boot loop hell... (with the red text at the bottom that says "this build is for development purposes only" etc). Holy crap I never had a phone that I could not remove the battery. I cannot get this back into recovery or ANYTHING, it just keeps looping... computer recognizes it, no problem with drivers or anything it just doesn't stay connected long enough (because of the constant looping) to be able to use the toolkit.
PLEASE any advice?? Can't even shut it down omg. Do I have a $600 brick here? :crying::crying:
Click to expand...
Click to collapse
no. if it turns on you should be ok. try holdind power+vol down to get into bootloader then try toolkit if it just stays on waiting for device press power button to get into fastboot mode from bootloader
skinsfanbdh said:
yes your not the first person with this problem. hold power+vol down to get into bootloader. press power button in bootloader to get in fast boot mode. use all in one toolkit to erase cache and side load rom. i recommend all in one toolkit because it automates the process. just select the option then follow on screen steps
Click to expand...
Click to collapse
hi again. this morning my battery finally out. Then i put my phone to the charger and started it in fastboot mode( that is a good new) Then i left it for 20-30 minutes to charge a little bit for flashing custom rom.Then i went to recovery and started adb sideload. Sideload was succesful and finally came to aroma installer of trickdroid. I chose my installation options and started to flash rom but process was frozen on 10 percent. It was saying unmount system, unmount cahce and both of them has notification as "already unmounted". But installation was not going on. Then again i tried to go back fasboot mode again by press and holding power+vol down but unfortunatelly lights are blinking but nothing happens again. I think i need to wait to battery die again.
Isn't it quite weird? Why power+vol down combination does not work for me anytime? So, do i need to wait for battery die in every frozen? Do you have any ideas or comments ?
Do i need to go back to stock first ?
EDIT : Battery was out again and i tried once more. This time installation (trick droid) was successful but it frozen at the end this time. And unfortunatelly i can not restart (power+vol down) it again again Holy crap, i am really pissed off with this problem.
O..K...Finally, i managed to start my phone and now it works... Especially thank you skinsfanbdh for your support.
But still i don't know how to solve button configuration problem. But anyhow i think i won't need quite sometim to use it I hope someone can find a solution for that later.
Guide me with steps please
Blue_Shine said:
O..K...Finally, i managed to start my phone and now it works... Especially thank you skinsfanbdh for your support.
But still i don't know how to solve button configuration problem. But anyhow i think i won't need quite sometim to use it I hope someone can find a solution for that later.
Click to expand...
Click to collapse
Hi, I have the same problem now and I let my phone die but when I put it to charge and try to go in bootloader, it's doesn't go and gets stuck at the logo again.
Would you please guide me with the steps how u fixed your phone?
Blue_Shine said:
O..K...Finally, i managed to start my phone and now it works... Especially thank you skinsfanbdh for your support.
But still i don't know how to solve button configuration problem. But anyhow i think i won't need quite sometim to use it I hope someone can find a solution for that later.
Click to expand...
Click to collapse
Do u fix it,i have same problem.on Zenfone max.after successfully rom installation i reboot my phone thn it stuck on resurrection remix logo,then i go into recovery,and mount the stock image without wiping.then twrp showed that image installation successful.thn i reboot it in recovery but it stuck on asus logo.what can i do right now?
Fix it
skinsfanbdh said:
no. if it turns on you should be ok. try holdind power+vol down to get into bootloader then try toolkit if it just stays on waiting for device press power button to get into fastboot mode from bootloader
Click to expand...
Click to collapse
Today i fixed it via asus flash tool.with the right steps it can be flash to stock with no problem
What should I do if I can't even get to the boot screen? I tried holding down the power and volume up buttons, but it just restarts and goes back to the same HTC load screen, what do I do????
Wiped data cache AND dalvik, flashed to Malladus, installed GApps and LGApps at the same time. Been sitting at the android animation for at least 45 minutes all three times and still wont boot. I'm downloading stock image but was hoping someone had an experience similar and had an easy solution?
briangp said:
Wiped data cache AND dalvik, flashed to Malladus, installed GApps and LGApps at the same time. Been sitting at the android animation for at least 45 minutes all three times and still wont boot. I'm downloading stock image but was hoping someone had an experience similar and had an easy solution?
Click to expand...
Click to collapse
And now I offically think my phone is screwed. I cant boot into recovery, every time I try it wont enter and just reboots because I'm holding the power and volume down buttons. So far I don't think I can enter download mode either.
briangp said:
And now I offically think my phone is screwed. I cant boot into recovery, every time I try it wont enter and just reboots because I'm holding the power and volume down buttons. So far I don't think I can enter download mode either.
Click to expand...
Click to collapse
How to get into TWRP with hardware keys on G2
1. Make sure phone is completely powered down.
2. Press and hold the Volume down button and the Power button.
3. When the LG logo is displayed release the Power button only then immediately press and hold the Power button again.
4. Release both buttons when the Factory Hard Reset screen displays.
5. Press the power button three times, like it says. Even though it says it will delete everything, it won't (I can confirm that if you are at least on v2.6.3.2).
6. After a "factory reset processing" appears, you should get the TWRP flash screen, and you are good to go.
From this thread: http://forum.xda-developers.com/showthread.php?t=2534981
acejavelin said:
How to get into TWRP with hardware keys on G2
1. Make sure phone is completely powered down.
2. Press and hold the Volume down button and the Power button.
3. When the LG logo is displayed release the Power button only then immediately press and hold the Power button again.
4. Release both buttons when the Factory Hard Reset screen displays.
5. Press the power button three times, like it says. Even though it says it will delete everything, it won't (I can confirm that if you are at least on v2.6.3.2).
6. After a "factory reset processing" appears, you should get the TWRP flash screen, and you are good to go.
From this thread: http://forum.xda-developers.com/showthread.php?t=2534981
Click to expand...
Click to collapse
Thanks for replying. I've read how to get into the recovery menu many times. Something is wrong with my phone that prevents me from doing it. I'm assuming its hardware related. I was almost ready to give up yesterday when I found out that if I do the key combo while plugging it into USB, it enters the menu normally. At that point I was able to restore my backup and start again.
I think my phone has a fluke, but I've figured out a way around it.
For those who are using Malladus on Verizon, something was wrong with the radios in the set. I had to find a seperate KK baseband file for the VS980 and flash it over top of the ROM to get it to work. I'm not saying its the same results for everyone, but I tried every variant of his directions (just in case) and was unable to get LTE online. It was the seperate BB file later on that fixed it.
Hello, my young brother just bootlooped his new phone, he tried to root the device.
He was following this tutorial - https://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
Unlocking bootloader went fine, then installing TWRP went (probably) fine, then the phone needed another factory reset. And since that moment, there is just "Your device has been unlocked..." and we can't do anything. Going to recovery is impossible. The battery is above 50% so waiting for it to go down on its own will take over a week.
We have a backup made with HiSuite.
I'm not really into huawei, so I've not a single clue what to do. Please, help us guys. Thanks in advance.
Search for firmware flashing with dload method.
Sent from my EVA-L09 using Tapatalk
I'm not any good at such things, really. I don't want to brick the phone, that's why i'm asking you for help. And your help didn't enlight anything, really. So sorry for my ignorance, but I would be greatful if you could explain it in easier way. Thanks in advance.
Just HOLD Volume Down & Power Button Together . Realese Power Button & HOLD Volume Down button when Huawei Logo Appear than You reboot to TWRP(If Install)
Just cheack TWRP installed or not
It's not installed. I have no idea how to boot into system, it just loops. I can't even enter fastboot mode.
ethernity7 said:
It's not installed. I have no idea how to boot into system, it just loops. I can't even enter fastboot mode.
Click to expand...
Click to collapse
Turn of your phone than HOLD Volume Down button than connect to usb than yout phone reboot into fastboot
That's what I try to do. Fastboot doesn't load when i hold volume down + power. I can't turn the device off because it just continously starts over and over again. The phone starts normally when battery goes down completely, system loads but then phone goes off due to lack of battery.
ethernity7 said:
That's what I try to do. Fastboot doesn't load when i hold volume down + power. I can't turn the device off because it just continously starts over and over again. The phone starts normally when battery goes down completely, system loads but then phone goes off due to lack of battery.
Click to expand...
Click to collapse
Sent me a massage after you going to Fastboot
I can't enter fastboot, it doesn't start. It just restarts and i see the screen "phone has been unlocked and can't be trusted, phone is booting..." something like that.
you cant enter fastboot, if you have not... do you even know, what you need to do, to enter fastboot? there is more than two thing to do, so, does you realy know what need to do ? call all thngs you need to do, to enter fastboot please.
got similar problems, because i instaled wrong custom recovery.
there are 2 sugestions, got in fastboot, im sure, its working if do it properly and instal proper recovery, for your model. second, use dc phoenis here
ps. why this post are in p9 not p9 lite forum?!
Well, I plug the device to PC using usb cable and when it's bootlooping I hold volume down and power button. That's how i was entering fastboot before. Now it doesn't work.
I've got stock recovery.
hold power button ~30 sec, force restart. even then nothing? well, if fastboot not working, then its gone. Ofcorse, there need to be a way, how you put on board files to work software, but im sure, thease things have only huawei.
The phone is just bootlooping, nothing else. If the battery goes down and i plug it to its charger I'm able to boot normally into the system. But once i try to turn it off it bootloops again.
ethernity7 said:
Well, I plug the device to PC using usb cable and when it's bootlooping I hold volume down and power button. That's how i was entering fastboot before. Now it doesn't work.
I've got stock recovery.
Click to expand...
Click to collapse
Turn of your phone than HOLD VOLUME DOWN & CONNECT TO USB
---------- Post added at 11:03 AM ---------- Previous post was at 11:01 AM ----------
ethernity7 said:
The phone is just bootlooping, nothing else. If the battery goes down and i plug it to its charger I'm able to boot normally into the system. But once i try to turn it off it bootloops again.
Click to expand...
Click to collapse
Sent me friend request on Facebook www.facebook.com/Rakhib.Mistry
I will tell you how to Unbrick. Don't worry i will want money from you
I can't turn it off. It automatically turns itself on and catches bootloop. I just wrote that fastboot doesn't load at all
Hi Everyone! Well, today is my time to ask for some help! :fingers-crossed:
I got my hands on a great looking Huawei P20 PRO, unfortunately the Phone is locked FRP... But as i had searched around, there was a method to bypass that by a simple bug they had on the "TALKBACK", like one week ago people was doing that bypass successfully , but this phone has a newer version of talk back, 7.1.x.x...
On the videos people have the previous 6.1.x.x version... That means i don't have the same "help" option as they have.
-After that i tried to get the phone into Fastboot mode, but i can't get the phone on that mode, i press volume down and hold for a while with the device turned off, then i plug the usb, and it just starts charging...
-I press Both vol up and vol down buttons with power at same time, it goes to a screen "EMUI" that says "SOFTWARE INSTALL FAILED! GET HELP FROM xxxx.EMUI COM/BLABLABLA) and says "Reboot system now"...i then press reboot now, and i does a regular reboot and starts up to select language etc, all good... BUT FRP locked...
- Then last night i tried to press VOLUME UP then plug the USB and it got into Erecovery mode, that gave me the option to download the latest version, wipe the current one, shutdown, or reboot... well i had nothing to lose and i did the first to download the latest version, after a 4gb download and install the phone is on the same situation, same version, same everything....
Makes me wonder if someone already done bad attempts before me.
Is there anyway to get the phone on Flashboot? Or bypass the FRP ?
Same
I have exactly the same
Any help????
Thebuckers1986 said:
I have exactly the same
Any help????
Click to expand...
Click to collapse
have you tried the wifi update? it didnt work with me... search for "Upgrade to Android Pie through eRecovery and the Wifi - Firmware Finder PC"
I have a G973F that I managed to root and get TWRP installed. I attempted to install the BeyondROM but wouldn't make it past the logo screen so I attempted to flash the original firmware for my device using Odin. There were no errors when I flashed the firmware but the system still didn't boot. I tried to do a factory reset from the recovery menu and it seemed like it completed but now my device will only turn on with "Only official released binaries are allowed to be flashed" at the top. It does not attempt to boot the OS and turns off a few seconds after I release the power button. I have held the Bixby+Vol Up buttons to attempt to get into recovery, doesn't work. I have held Bixby+Vol Down buttons and plugged my phone into my computer to try and boot download mode, doesn't work.
I can't do anything at this point. Does anyone have a way I can use to recover from this?
Hi I got plenty of times this msg "Only official released binaries are allowed to be flashed". You don't have to worry about it. Just try to flash Official Stock and it will be fine.
GearCEO said:
Hi I got plenty of times this msg "Only official released binaries are allowed to be flashed". You don't have to worry about it. Just try to flash Official Stock and it will be fine.
Click to expand...
Click to collapse
Unfortunately I cannot get to download mode to do that. My phone turns on flashes the notice and then turns off. If I hold the power button it will stay on but Download Mode and Recovery cannot be booted to.
erukami said:
Unfortunately I cannot get to download mode to do that. My phone turns on flashes the notice and then turns off. If I hold the power button it will stay on but Download Mode and Recovery cannot be booted to.
Click to expand...
Click to collapse
Thats the tricky part but I know its hard. Try to press together Bixby + Power button. As soon as it goes off then suddenly press Bixby + Volume Down button and attach data cable. I got the same issue because you have only few seconds to do it. If you cant do it then try to get some help of your friend or relatives etc. I am damn sure you can do this. You take reponsibility of buttons and tell your friend to attach the cable once it goes off. And sorry for my bad english
GearCEO said:
Thats the tricky part but I know its hard. Try to press together Bixby + Power button. As soon as it goes off then suddenly press Bixby + Volume Down button and attach data cable. I got the same issue because you have only few seconds to do it. If you cant do it then try to get some help of your friend or relatives etc. I am damn sure you can do this. You take reponsibility of buttons and tell your friend to attach the cable once it goes off. And sorry for my bad english
Click to expand...
Click to collapse
Your English is great and it worked as you said. I totally thought I was out the cost of this damn phone. Was that documented somewhere or did you randomly figure that out?
Its even easier - you can keep the cable attached. Had some story ...)
erukami said:
Your English is great and it worked as you said. I totally thought I was out the cost of this damn phone. Was that documented somewhere or did you randomly figure that out?
Click to expand...
Click to collapse
I never thought my English is good. Hehehehehe By the way I figure this out because it happens to me many times I guess. Anyways glad I helped.