Related
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
ClementNerma said:
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
Click to expand...
Click to collapse
Are you on EMUI 5 (Android Nougat) ? If so, official TWRP is not compatible with version > EMUI 4.x for now.
I'm using EMUI 5.0 / Android 7.0.
So now I've installed an incompatible TWRP can I just downgrade to EMUI 4.0 / Android 5.0 then flash it again and root my phone or should I reflash the original recovery before doing that ? I've read somewhere that updating a rooted phone could brick it so even if mine has just a TWRP and want to downgrade instead of upgrading I prefer to be sure.
Thanks by advance !
ClementNerma said:
I'm using EMUI 5.0 / Android 7.0.
So now I've installed an incompatible TWRP can I just downgrade to EMUI 4.0 / Android 5.0 then flash it again and root my phone or should I reflash the original recovery before doing that ? I've read somewhere that updating a rooted phone could brick it so even if mine has just a TWRP and want to downgrade instead of upgrading I prefer to be sure.
Thanks by advance !
Click to expand...
Click to collapse
you need install original recovery and extract update.app from B100 firmware, then you place it to "dload" folder in your sd card and flash using 3 buttons. you cant full brick by messing with root. only soft brick which is fixable.
Ok I'll try it. I will post again if something comes wrong.
Thanks a lot for your help
I forgot to ask about one thing : I'm owning a phone with NEM-L51 model and I don't know if I can use NEM-L22 firmware ? If I can't, where can I find the right files to downgrade this specific model ? All the firmware files I see on the web are for the NEM-L22...
EDIT : I've found the B102 firmware for NEM-L51 model (Europe + UK) can I take it for the downgrade or is the B100 specific version needed ?
ClementNerma said:
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
Click to expand...
Click to collapse
It is easy bro . When the phone shows warning logo , click volume up + power and don't leave it untill it find a vibration . Leave the buttons after 3 seconds u felt vibration
gopinaidu77 said:
It is easy bro . When the phone shows warning logo , click volume up + power and don't leave it untill it find a vibration . Leave the buttons after 3 seconds u felt vibration
Click to expand...
Click to collapse
Thanks for your help but this doesn't work. When I do what you say it goes again and again to the same warning screen which never disappears. This is really strange, when I see videos I find on YouTube all Honor 5C owners that just do what you say enter in recovery mode, but it's not my case... I really wonder why.
I don't know if that can help you to understand, but I'm using a french Honor 5C phone, with EMUI 5.0 / Android Nougat like I said previously, model is NEM-L51 and I did the Android Nougat update several days ago using the Honor's official update application, which is natively installed on the phone.
About the firmwares, I've tried the B102 version for the specific model I own but each time (I downloaded the update ZIP several times, the first one with two folders named '1-main' and '2-vendor', the second with just the 'dload' files) the update stops at 5 purcents and says "Software install failed! Incompatibility with current version. Please download the correct update package."
What can I do to solve this problem ?
ClementNerma said:
Thanks for your help but this doesn't work. When I do what you say it goes again and again to the same warning screen which never disappears.
About the firmwares, I've tried the B102 version for the specific model I own but each time (I downloaded the update ZIP several times, the first one with two folders named '1-main' and '2-vendor', the second with just the 'dload' files) the update stops at 5 purcents and says "Software install failed! Incompatibility with current version. Please download the correct update package."
What can I do to solve this problem ?
Click to expand...
Click to collapse
When u click on vol up + power in warning screen .dont leave it till it shows erecovery . Probably its 6-7 seconds
gopinaidu77 said:
When u click on vol up + power in warning screen .dont leave it till it shows erecovery . Probably its 6-7 seconds
Click to expand...
Click to collapse
When you do Volume Up + Power it attemps to enter recovery mode, not recovery (that's what I read), excepted if a USB cable is plugged in (which is not my case). And that still doesn't work.
However, I'm able to enter erecovery mode by turning on the phone with only the Power button, then holding "Volume Up" as written on the screen (there are 3 boot options that shows up, but only when I boot normally) and I enter erecovery mode. But I can't do anything interesting in this mode, just download the latest firmware (which fails at each attempt, even when I'm connected to a working WiFi point), shutdown or reboot the phone normally.
Shoud I show you a video of when I boot my phone in normal mode / recovery mode / erecovery mode ?
ClementNerma said:
When you do Volume Up + Power it attemps to enter recovery mode, not recovery (that's what I read), excepted if a USB cable is plugged in (which is not my case). And that still doesn't work.
However, I'm able to enter erecovery mode by turning on the phone with only the Power button, then holding "Volume Up" as written on the screen (there are 3 boot options that shows up, but only when I boot normally) and I enter erecovery mode. But I can't do anything interesting in this mode, just download the latest firmware (which fails at each attempt, even when I'm connected to a working WiFi point), shutdown or reboot the phone normally.
Shoud I show you a video ?
Click to expand...
Click to collapse
No i understood
gopinaidu77 said:
No i understood
Click to expand...
Click to collapse
The problem is that I can't enter recovery mode, each time I try to install an OTA or full update package from the /dload folder on the SD card it fails, so I can't downgrade at all. Do you know a link that sure points to the good update package version for the Honor 5C on EMUI 5.0 in order to downgrade to Marshmallow ? I've found several links during my searches but I don't know if the installation fails because of a phone's bug or if it fails because of an invalid version.
EDIT : I forgot to precise the long model name of my phone : NEM-L51C432B350. On Firmware Finder Rewrite it shows that there are only two update packages for it, published on 20.04.2017... So I wonder if I need to download the three files shown in the filelist of the big update (1.68 Gb) and install them on the device ?
ClementNerma said:
The problem is that I can't enter recovery mode, each time I try to install an OTA or full update package from the /dload folder on the SD card it fails, so I can't downgrade at all. Do you know a link that sure points to the good update package version for the Honor 5C on EMUI 5.0 in order to downgrade to Marshmallow ? I've found several links during my searches but I don't know if the installation fails because of a phone's bug or if it fails because of an invalid version.
Click to expand...
Click to collapse
Stock recovery wont have an option . There is no graphical UI for installation.
Downgrade or update is just a manual procedure.
In order to roll back , u need to install a roll back package and then the origional MM package . Using the three button combination
gopinaidu77 said:
Stock recovery wont have an option . There is no graphical UI for installation.
Downgrade or update is just a manual procedure.
In order to roll back , u need to install a roll back package and then the origional MM package . Using the three button combination
Click to expand...
Click to collapse
Ok but where can I find this rollback package ? I only find files for the NEM-L22 model...
EDIT : If found the Russian version from here but is it ok to take it ?
ClementNerma said:
Ok but where can I find this rollback package ? I only find files for the NEM-L22 model...
EDIT : If found the Russian version from here but is it ok to take it ?
Click to expand...
Click to collapse
Yes that's fine.
gopinaidu77 said:
Yes that's fine.
Click to expand...
Click to collapse
Ok so in the guide I found on the same page I linked in my previous post (the guide is hopefully written in english) it says that the phone must haven't been rooted or even unlocked, so I prefered to relock the bootloader (and completely reset my phone, for the third time at least in two days).
But then I realized I would need to have an unlocked bootloader for the flash so I unlocked it again, but now the device stucks on "Your device is booting now..." with no option at all whatever I do, whatever the buttons I push... I'll really start to think I'm simply idiot
I'm searching on how to solve this new problem and unbrick the phone... 'cause I can't even shutdown it, the "Volume Up + Power" combination while USB plugged in or anything else doesn't work this time.
EDIT : Okay so my phone seems to really be hard-bricked. My phone just stays at the screen "Your device is booting now..." with no option at all, I can't shutdown it, I can't enter recovery or erecovery mode. Does anyone know what to do or is my phone definitively bricked ?
ClementNerma said:
Ok so in the guide I found on the same page I linked in my previous post (the guide is hopefully written in english) it says that the phone must haven't been rooted or even unlocked, so I prefered to relock the bootloader (and completely reset my phone, for the third time at least in two days).
But then I realized I would need to have an unlocked bootloader for the flash so I unlocked it again, but now the device stucks on "Your device is booting now..." with no option at all whatever I do, whatever the buttons I push... I'll really start to think I'm simply idiot
I'm searching on how to solve this new problem and unbrick the phone... 'cause I can't even shutdown it, the "Volume Up + Power" combination while USB plugged in or anything else doesn't work this time.
EDIT : Okay so my phone seems to really be hard-bricked. My phone just stays at the screen "Your device is booting now..." with no option at all, I can't shutdown it, I can't enter recovery or erecovery mode. Does anyone know what to do or is my phone definitively bricked ?
Click to expand...
Click to collapse
Long click of power button will shut down the phone. Why u always refer about usb cable . Follow all instructions unplugged
Even the same happend for my honor 8 . Ur device isnt hard bricked .its just a soft brick
gopinaidu77 said:
Long click of power button will shut down the phone.
Even the same happend for my honor 8 . Ur device isnt hard bricked .its just a soft brick
Click to expand...
Click to collapse
Nope, long click of power button will just reboot the phone and make it displaying the same screen again and again.... I can't shutdown it at all. I've tried several times but it doesn't work :crying:
ClementNerma said:
Nope, long click of power button will hust reboot the phone and make it displaying the same screen again and again.... I can't shutdown it at all. I've tried several times but it doesn't work :crying:
Click to expand...
Click to collapse
Yes , the same happend for me ! U can unbrick bro
gopinaidu77 said:
Yes , the same happend for me ! U can unbrick bro
Click to expand...
Click to collapse
But how can I unbrick the phone ? I can't enter in any mode, I can't connect it to PC, I can't shutdown the phone, I can't use ADB or FastBoot on it, I can't reflash the bootloader or install a TWRP, downgrade or boot normally, I can't do anything !
So how could I unbrick it ? For now it's just still displaying "Your device is booting now..."
If you know how to do, please tell me so I can unbrick my phone. Sorry for asking you so many things I don't understand myself why there are so many problems...
Hello everyone, I saw a few posts on this forum about other bricked phones, but my case is different (if its not then please link me the thread, Thanks).
Story: Today I decided that my unrooted phone wasn't enough for me, so I said: "Why not root?" . I have to add that I owned a LG Magna 3G before this Huawei P8 LIte 2017 and oh boi was the rooting procedure WAY HARDER(the huawei procedure)... I did well with my LG, but not so well with my Huawei. To be honest I was almost done but because I couldnt boot into TWRP, I decided to follow a guide I cant find cause I followed so many that my History is a mess (if anyone requests I will do some digging though). The guy suggested to someone that couldnt boot into TWRP (like me) that he should falsh TWRP>relock his OEM>Shutdown>Press a combination to go into recovery mode>???>Profit. I did just that but my device is now a 180 Euro brick.
Probelm: My device bootloops. Every time I shut it down (hold power key for 10sec), it reboots and gets stuck on the famous "Your device has been locked and can't be trusted. To learn more, BLAH BLAH BLAH. Your device is booting now...
I tried several key combinations, but whatever I do, when I hold my power key for 10sec, The huawei logo pops up for a second or two and then I get stuck on this screen again...
Sadly, I seem to have no connection between my PC and my device (adb can't find any connected device).
I also want to add that, after I was promted to relock my OEM, I removed the USB cable whoopsie.
What Im looking for:
A way to regain contact between my PC (adb) and my phone
A way to shutdown my device for now (and not forever... just for the night)
Someone to tell me that he had the same issue and took the following steps (Need clear answers and steps)
Anything else whatsoever
I don't think it's necessary to provide the files I used, since the reason my device is like this is because of my own stupidity:silly:
Thank you for your time.
You have to hold Power and Volume Up button pressed to boot into erecovery, not only power, check it.
grgzz said:
You have to hold Power and Volume Up button pressed to boot into erecovery, not only power, check it.
Click to expand...
Click to collapse
Sorry for replying after 2 hours, I didn't get a notification.
I tried:
1. Holding the buttons until I see the "your device is booting..." message
2.Holding the buttons until it vibrates
3.Holding the buttons until I see the Huawei logo
Thanks for your time anyway
You press Volume Up + Power simultaneously, when you see the Huawei logo you release Power and hold Volume Up only until it boots to erecovery.
grgzz said:
You press Volume Up + Power simultaneously, when you see the Huawei logo you release Power and hold Volume Up only until it boots to erecovery.
Click to expand...
Click to collapse
Tried this several times, no result.
Is there a more drastic solution to my stubborn phone?
Aneom7331 said:
Tried this several times, no result.
Is there a more drastic solution to my stubborn phone?
Click to expand...
Click to collapse
The most drastic solution is the DC Phoenix software, not for free, if i am right they ask 15€ for 72 hours.
Not going to bother with this one tho... if I am very desperate, I might try to "borrow" it, but Im gonna seek other solutions until then.
Thanks for your time
On the "your device has been unlocked" hold the Volume up button until you boot to eRecovery. From there connect to wifi and restore stock rom. Afaik, erecovery should boot on bootlooped device. Give it a try
If this doesnt work, plug in to pc, and hold volume up + power, on huawei logo leave power button and hold volume up until you get to erecovery
aciupapa said:
On the "your device has been unlocked" hold the Volume up button until you boot to eRecovery. From there connect to wifi and restore stock rom. Afaik, erecovery should boot on bootlooped device. Give it a try
If this doesnt work, plug in to pc, and hold volume up + power, on huawei logo leave power button and hold volume up until you get to erecovery
Click to expand...
Click to collapse
Hello, thanks for replying
My device is now good, only gapps are missing but I don't care too much. Here is what happened:
So, I left my phone unplugged from any power source during the night (meanwhile the screen couldn't turn off), although I swear I did this 20 times already, when I booted my device after I came back from my University, my phone booted into eRecovery... I downloaded the latest package and it seems to work just fine now, the only problem is that the gapps need to be flased via TWRP (that I don't think I have anymore, how ironic).
Thanks to all of you who cared about giving me a solution :victory: Have a fantastic day
If you want to have a complete working system, i suggest you to try to update using erecovery again. It should download full firmware with gapps etc
Aneom7331 said:
Hello, thanks for replying
My device is now good, only gapps are missing but I don't care too much. Here is what happened:
So, I left my phone unplugged from any power source during the night (meanwhile the screen couldn't turn off), although I swear I did this 20 times already, when I booted my device after I came back from my University, my phone booted into eRecovery... I downloaded the latest package and it seems to work just fine now, the only problem is that the gapps need to be flased via TWRP (that I don't think I have anymore, how ironic).
Thanks to all of you who cared about giving me a solution :victory: Have a fantastic day
Click to expand...
Click to collapse
aciupapa said:
If you want to have a complete working system, i suggest you to try to update using erecovery again. It should download full firmware with gapps etc
Click to expand...
Click to collapse
Well, that was what we told you to do at first time. Erecovery can bring it back to life easily. Now as you have already been told erecovery flashes the complete firmware, including gapps.
You can also try to update it through the settings menu, in the system update settings you press the three dots menu on the upper right corner and select download latest complete package.
grgzz said:
Well, that was what we told you to do at first time. Erecovery can bring it back to life easily. Now as you have already been told erecovery flashes the complete firmware, including gapps.
You can also try to update it through the settings menu, in the system update settings you press the three dots menu on the upper right corner and select download latest complete package.
Click to expand...
Click to collapse
I know you told me first but, the difference was that, my phone had to ran out of battery to do this. In the end of my last reply I said thanks to all of you who cared, including you, you cared the most actualy
Aneom7331 said:
I know you told me first but, the difference was that, my phone had to ran out of battery to do this. In the end of my last reply I said thanks to all of you who cared, including you, you cared the most actualy
Click to expand...
Click to collapse
Well, at least it works now.
Good morning people,
Hope you are well!
I updated my Mi A2 via OTA to PIE, it was in Bootloop, I got MiFlash back to OREO (V9.6.16.0), and I tried to install PIE, now for Fastboot MiFlash , but my cell phone was again in Bootloop.
Does anybody know how to solve this?
Or what happened to someone else?
Thanks for the help!
Claim warranty by far the most easy solution.
And yeah more people have this isseu.
had same problem... twice but solved very easy
just boot to recovery boot (volume down ad power)... connect power and left 10-15 minutes...
dont disconnect phone from power and press and hold power until reboot, release power button and voila, phone normally boot!!!!
i notice if you not wait long enough in recovery boot, phone remain in bootloop... just be patient and maybe helps... works for me twice...
dxdy said:
had same problem... twice but solved very easy
just boot to recovery boot (volume down ad power)... connect power and left 10-15 minutes...
dont disconnect phone from power and press and hold power until reboot, release power button and voila, phone normally boot!!!!
i notice if you not wait long enough in recovery boot, phone remain in bootloop... just be patient and maybe helps... works for me twice...
Click to expand...
Click to collapse
But when I do this, it goes into Fastboot mode (power and volume minus).
Are you talking about going into recovery mode?
ewertombarbosa said:
But when I do this, it goes into Fastboot mode (power and volume minus).
Are you talking about going into recovery mode?
Click to expand...
Click to collapse
just enter in fastboot mode and do nothing... only connect to power charger
is weird because i had two times this problem.. once after android 9 upgrade week ago, and second time today after factory reset
every times i cant do anything to work... this with power charger was stupid idea but is worked.... just connect charger in fastboot mode, wait 10-15 minutes and restart phone with power button... both times this worked for me...
i remember few years ago similar problem with Nokia/MS windows phones batteries and similar steps helped...
After instal january update and restart, on the phone see Android One logo and nothing is happening. After 5 minutes it switches off.
I'll get to the bootloader, but I can not unlock the bootloader (neither unlock critical). Is anyone able to help?
Use official xiaomi "MI FLASH TOOL" on Windows and flash with full stock image named "fastboot rom"
(Download image here: https://xiaomifirmware.com/roms/latest-android-roms-for-xiaomi-mi-a2/)
(You have to extract on Windows this tar.gz and tar also, and then flash with Xiaomi tool)
If you need help with this tool, read this "mi flash tool" tutorial:
https://www.themefoxx.com/2018/07/xiaomi-mi-flash-tool.html
I tried to install an update through OTG method and now my phone won't boot at all, it only vibrates and can go to reovery mode. I think i soft-bricked it. Please, someone help bcs this is my primary and only phone.
https://www.hardreset.info/devices/huawei/huawei-p30-pro/hardreset/first-method/
I tried it already and it stops at 5%. Is there a way to flash it through fastboot mode? It seems like that's the only thing running fine on the phone
First turn off the phone
Hold the volume up button and then connect the phone to usb power, it will boot to recovery. There you can connect to wifi and download the correct firmware.
Hold on... So are updates okay for this phone?
I'm about to turn mine on for the first time today but I don't want to bust it straight away.
I'd be hosting OTA.
Brotuck said:
First turn off the phone
Hold the volume up button and then connect the phone to usb power, it will boot to recovery. There you can connect to wifi and download the correct firmware.
Click to expand...
Click to collapse
I bought the phone two days ago. After testing various settings I tried to go into the recovery mode by pressing Power+VolumeUp.
After that the phone displayed a message:
software install failed! get help from emui.com/emotiondownload.php?mod=restore
I did it again and again with the same result. So I decided to return the phone to the shop. In a shop I took another one.
I go home and repeated the test, again with failure.
So, you are my saviour. I didn't know the trick with the usb cable.
Thank you! :good:
Hello,
I was on CrDoid 7.2. (Android 11) It was working normally.
I rebooted to recovery (TWRP 3.5), and flashed CrDroid 6.2 (Android 10).
And it bricked severely the phone. At startup, i get a message
"REV CHECK FAIL, DEVICE:9, BINARY:8 (DTB)"
I really think the situation is hopeless :
- impossible to reach download mode
- impossible reach recovery mode
- BixBy + Volume down + Power + plugging the cable doesn't work
- if the telephone stays plugged, i get a boot-loop (before the message "your bootloader is unlocked, please press power button to continue")
Any help is welcome but i really think i lost my phone. Quite painful. I'm not so rich.
I think the device tree of the ROM i flashed is mistaken.
I played i lost.
Jean
jean_michmich said:
Hello,
I was on CrDoid 7.2. (Android 11) It was working normally.
I rebooted to recovery (TWRP 3.5), and flashed CrDroid 6.2 (Android 10).
And it bricked severely the phone. At startup, i get a message
"REV CHECK FAIL, DEVICE:9, BINARY:8 (DTB)"
I really think the situation is hopeless :
- impossible to reach download mode
- impossible reach recovery mode
- BixBy + Volume down + Power + plugging the cable doesn't work
- if the telephone stays plugged, i get a boot-loop (before the message "your bootloader is unlocked, please press power button to continue")
Any help is welcome but i really think i lost my phone. Quite painful. I'm not so rich.
I think the device tree of the ROM i flashed is mistaken.
I played i lost.
Jean
Click to expand...
Click to collapse
Try the FRP Hijacker Tool. It has also happened to me that nothing worked anymore. The cell phone does not appear in the list, but still worked with the SC-01C and SoftBrick Fixer.
This also happened to me before, and I also couldn't get back to TWRP.
The error "REV CHECK FAIL, DEVICE:9, BINARY:8 (DTB)" means that the version of your device is at 9 and the binary you flashed is at 8. You can't simply downgrade Android versions on Samsung devices.
Are you sure you can't enter download mode? The key combination to enter download mode isn't what you said (" BixBy + Volume down + Power + plugging the cable doesn't work "). Try PLUGGING YOUR PHONE IN YOUR PC + VOLUME DOWN + BIXBY.
If you can access download mode, let me know so I can help you get your device unbricked.
Hello,
My mistake is that I downgraded from 11 to 10. You are probably right.
I think (but i'm not sure) that during downgrading, the sboot.bin is not anymore matching with the Device Tree and it generates a crash during flashing.
@WSC Productions : Huge thanks for the advice about the combo buttons.
@bininga59 : I'll give a try to your solution with the software FRP Hijacker Tool. But the phone is restarting itslef every 5 seconds..I wonder how a connection can be established.
Tonight will be a long night again
jean_michmich said:
Hello,
My mistake is that I downgraded from 11 to 10. You are probably right.
I think (but i'm not sure) that during downgrading, the sboot.bin is not anymore matching with the Device Tree and it generates a crash during flashing.
@WSC Productions : Huge thanks for the advice about the combo buttons.
@bininga59 : I'll give a try to your solution with the software FRP Hijacker Tool. But the phone is restarting itslef every 5 seconds..I wonder how a connection can be established.
Tonight will be a long night again
Click to expand...
Click to collapse
You can definitely go back from A11 to A10. It's the same bootloader (9). If it keeps restarting, then you should get into download mode too. Emergency off and then immediately quieter + Bixby immediately push the USB plug in.
jean_michmich said:
Hello,
My mistake is that I downgraded from 11 to 10. You are probably right.
I think (but i'm not sure) that during downgrading, the sboot.bin is not anymore matching with the Device Tree and it generates a crash during flashing.
@WSC Productions : Huge thanks for the advice about the combo buttons.
@bininga59 : I'll give a try to your solution with the software FRP Hijacker Tool. But the phone is restarting itslef every 5 seconds..I wonder how a connection can be established.
Tonight will be a long night again
Click to expand...
Click to collapse
No problemo. Try @bininga59 's advice, it'll probably work - he probably knows more than I do about Samsung ROMs tbh. If it doesn't though, let me know.
What i didn't know :
Doing Volume down + BixBy Button + plugging cable for simple electric supply
Is not the same as
Doing Volume down + BixBy Button + plugging cable linked to a computer
The cable you plug to the telephone while you are pressing volume down + BixBy must be linked to a computer.
I finally reached the Download Mode
Many thanks again