Database Develop

[RECOVERY][m8qlul] TWRP 3.2.3-0 for HTC One M8s

Hello everyone,
TWRP 3.2.3-0 recovery for HTC One M8s
Download it from HERE
NOTE: Before flashing ensure that your last stock version was Android 6.0
Bugs
Decryption of /data is probably broken
XDA:DevDB Information
[RECOVERY][m8qlul] TWRP 3.2.3-0 for HTC One M8s, ROM for the HTC One (M8)
Contributors
root-expert, voidzero
Source Code: https://github.com/M8s-dev/android_device_htc_m8qlul
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Created 2018-06-17
Last Updated 2018-08-25

Reserved
Code:
[B][U]Changelog 30 July 2018[/U][/B]
* Upgraded recovery to version 3.2.3-0
* While on offmode charging pressing the power key reboots the phone
* While on offmode charging battery animation is show instead of TWRP screen
* Led is working now.
Code:
[B][U]Changelog 17 June 2018[/U][/B]
* Initial release

If you are coming from CM12.1 (Just like I did) then follow these steps
NOTE: If you do not follow these steps, your final Oreo ROM (LOS 15) will crash, you'll suffer randoms reboots and instability problems due to incompatible radio / HTC firmware. This whole update process to Stock 6.0 can take up to 4 hours! So make sure you have the time to do everything correctly, don't cut corners.
I suffered
1. Create a full backup of your ROM using TWRP (v2.8 or v3.0.2.0), Copy your INTERNAL STORAGE and SD Card contents to PC .
During the upgrade from "CM12.1 > 5.0.1 Stock > 6 Stock > LOS 15" you WILL lose your internal data! (because of bootloader relock & unlock again)
2. Relock your bootloader; (Make sure you are using the htc_fastboot.exe)
Turn off phone
Go into bootloader (Hold down VOL DOWN+Power button
Connect USB and enter Fastboot (Should show as FASTBOOT USB)
Open commandprompt;
Code:
htc_fastboot oem lock
The phone should restart and show up as ***RELOCKED***
3. Get your matching RUU from https://ruu.lalleman.net/HTC_M8S(QL_UL)/
If you dont know which RUU to get, follow this thread; https://forum.xda-developers.com/ht...lp-thread-htc-one-m8s-to-stock-howto-t3190238 (M8sQL_UL > Firmware (Expert)>Firmware Crypted (Original HTC))
If you get the "Device halted due to Large Image update fail" error during installation, just try another RUU - but make sure it matches your CID.
I got it working using a "signed" version. The "combined-signed" version did not work for me. Your mileage may very.
Click to expand...
Click to collapse
4. In Android Stock (5.0.1), continue the setup and after that go to: Settings > Software updates (At the bottom) > Check for updates
At first I only got 2 APP updates: "HTC Sense" and some other app (cant remember). Update both apps and reboot.
After a reboot check again for updates. Now you get a ~400Mb update. Download and install.
After the first update check again for updates. Now you get a ~1.23Gb update (Update to Marshmallow, Part 1 of 2). Download and install.
After that check again, and now you'll get a ~700Mb update (Update to Marshmallow, Part 2 of 2.)
That's it for going back to the most recent stock version. You now have Android 6.0 Stock running.
To install TWRP (if you want to flash LOS 15)
1. Unlock your bootloader again.
Go to https://www.htcdev.com/bootloader/ and follow the instructions.
2. Flash TWRP.
Code:
htc_fastboot flash recovery twrp-recovery-image-name-and-version.img
After that:
Wipe Cache/Dalvik, Data and System
Install LOS15
Wipe Dalvik again
Flash Gapps
Wipe Dalvik
Boot
Say thank you to @root-expert for keeping this phone alive with the development and @voidzero for providing the build-environment / mirrors
- Jeroen

Uploaded new build!
Changelog
Code:
* Upgraded recovery to version 3.2.3-0
* When on offmode charging pressing the power key reboots the phone
* When on offmode charging battery animation is show instead of TWRP screen
* Led is working
Grab it from here

guys, where do i find the ADBs for htc_fastboot? i installed years ago the "classic ones" but never heard about that command.

Hi!
I wanted to root and flash my old m8s to give it a new life,
but I noticed the twrp download link is dead as is the one for Lineage OS 15.1.
Could they be renewed/reuploaded?
Thanks in advance!
Sam

Official Ressurection Remix 8.1

Resurrection Remix
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
Requirements:
Honor 9i (RNE- L22)
I don't know if this will work on the other variants like RNE-L21, L23.
Your device MUST have an unlockable bootloader.
Your device MUST be Project Treble compatible. That means your device meets one of the following criteria:
Your device LAUNCHED with Android 8.0 Oreo or a newer version (eg. Android 8.1 Oreo) AND is Google Play certified. (If you rooted your device/flashed another custom ROM and somehow ended up with your device being listed as uncertified in Google Play, then don’t worry. We’re only concerned about the status of the device as it was shipped.)
Your device UPGRADED to Android 8.0 Oreo or a newer version AND was made Project Treble compatible by the manufacturer. See this article for a list of such devices.
For honor 9i(RNE-L22) u need to be in EMUI 8.0 otherwise u wont be able to flash this rom.
NOTE - ROM INCLUDES GAPPS AND SU (ROOTED)
ROM link - RESURRECTION REMIX
How to flash GSI system image? -
- CHANGE the ROM img file name to RROS
- copy the downloaded rom image file to the adb folder
- now once you are in that folder press and hold the shift key and right-click in the blank area , now select open command window here.
- Now u r in CMD enter the following code.
(Don't change any thing)
type - fastboot devices
(check if it shows any device if shows then process further or else install adb system wide properly)
type - fastboot -w
(this will wipe everything from your phone so before doing this take backup)
type - fastboot flash system RROS.img
(this will flash the rom)
when flash is finished
type - fastboot reboot.
HERE IS THE TRICKY PART
AFTER REBOOTING SYSTEM HUWAIE eRECOVERY WILL ASK TO FORMAT THE DATA PARTITION , DO THAT, AFTER THAT IT MAY AGAIN TAKE YOU TO RECOVERY, DO A SIMPLE FACTORY RESET AND REBOOT SYSTEM
NOW GIVE IT SOME TIME TO BOOT UP
Note: all the credit goes to the GSI image developer @phh
A big thanks to @KingofMezi for the recovery.
Please hit the thanks button for me.
Will add screenshot soon.
XDA:DevDB Information
Official Ressurection Remix 8.1, ROM for the Honor 9i
Contributors
sknoman1
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 8.0
Based On: AOSP
Version Information
Status: Stable
Created 2018-07-19
Last Updated 2018-07-19

VoLTE support?

AnantNigam said:
VoLTE support?
Click to expand...
Click to collapse
No there is no VOLTE support for now.. There isn't any treble rom that supports volte
But developers are working on it..

is this different from this rr rom? https://forum.xda-developers.com/ho...rrection-remix8-1-gsi-treble-project-t3807126

Hi can I wipe in adb commands? the fastboot -w doesn't work on my device. Also, where's the link for the adb?

Hi since the bootloader unlocking service is no longer supported by Huawei/ Honor team is there any other method available that could assist me with installing this ROM.

[RECOVERY][UNOFFICIAL][ONCLITE] TWRP 3.3.1-x

HTML:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
Introduction
This is an unofficial build of TWRP for Redmi 7 (onclite).
Based on TWRP version: 3.3.1
For device: onclite
Maintainer/Authors build: Galitsky Dmitry([email protected]/ [email protected])
Device tree: https://github.com/krot-melles/device_xiaomi_onclite-TWRP
In development plans
Supports CAF-based wrappedkey encryption (decryption) properly
Implemented
Mounts the system partition at /system_root as per AOSP standards.
Support install custom ROM (PE,RR and other)
Installation Instructions
Fastboot
Grab the recovery.img from extracted folder
Reboot device in fastboot
Run "fastboot flash recovery recovery.img" from fastboot
Boot into recovery
Downloads
IMG:Release list
Created 2019-05-10
Last update 2019-08-15

Thanks. I will try when I will arrived to home.
Is it control vendor partition too...?

I've installed your TWRP.
Unfortunately it is cannot bypass the encryption-decryption problem. Unfortunately, "format data" is required...
I need TWRP for Global Stable...but if I format data, after no SIM-card, and other problems (not suitable for MIUI incremental OTA)...this is good for custom roms only.
But very-very thanks your work.
Maybe next build will be better.
小米8青春版4/64国际版MIUI10.3.2.0

Somehow it wont flash the recovery on the 16/2gb version, yes phone is unlocked.
after abd flash recovery recovery.img it says ok, but after reboot no twrp but the original redmi bootloader v3.0.

TWRP is not flashable to Locked bootloader!
朱利安死了.請不要再打電話給他.红米7标准版3GB32GB稳定MIUIv10.3.6.0PFLINXM

please read, phone aka bootloader is unlocked.

Sorry. I ve read wrong.
So. On new phones need different install method
1.fastboot flash recovery recoveryname.img
2.fastboot boot recoveryname.img
(if img booted, you need reflash third recoveryname.img in TWRP, and you need install Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip then reboot if you want to use stock system)
or
1.fastboot flash recovery recoveryname.img
2.press an hold volume up
3.fastboot reboot command (on pc, press enter...but hold volume up constantly)
4.maybe then after mi logo, TWRP will launching
5.make format data with TWRP
6.install custom ROM
Day by day Xiaomi system is more closed.
朱利安死了.請不要再打電話給他.红米7标准版3GB32GB稳定MIUIv10.3.6.0PFLINXM

Ok got it working now thanks.
indeed little bit different than other phones i have used.

Update TWRP
15082019
BoardConfig: fixed PARTITION_SIZE values ​​equated to partition.xml values
fstab: some fix
Click to expand...
Click to collapse
TWRP download

Do this recovery support decryption in stock ROM?

sherindroid said:
Do this recovery support decryption in stock ROM?
Click to expand...
Click to collapse
No((( maybe fix it in next build

Can I install ROM Builder from mi-globe.com? Can I take an error "Updater process ended with: Error 7"?

AdamWilling said:
Can I install ROM Builder from mi-globe.com? Can I take an error "Updater process ended with: Error 7"?
Click to expand...
Click to collapse
Do you have the opportunity to take a screenshot or error log???

can you flash apps with this version of twrp?

melles.android said:
Do you have the opportunity to take a screenshot or error log???
Click to expand...
Click to collapse
I already didn't tested...but maybe I know the problem, in redmi 7 is wrote onclite on every rom, but getvar of device is onc

Good work but encryption problem i hope get fixed

does this handle decryption and can disable dm-verify?

need help
JulianJenner said:
I've installed your TWRP.
Unfortunately it is cannot bypass the encryption-decryption problem. Unfortunately, "format data" is required...
I need TWRP for Global Stable...but if I format data, after no SIM-card, and other problems (not suitable for MIUI incremental OTA)...this is good for custom roms only.
But very-very thanks your work.
Maybe next build will be better.
小米8青春版4/64国际版MIUI10.3.2.0
Click to expand...
Click to collapse
hey julian i am replying you on this thread as the https://forum.xda-developers.com/redmi-7/how-to/redmi7-lr-team-twrp-3-3-0-redmi7-cn-t3924278 (this) is closed.
i am searching for a working recovery but available twrp are not getting the job done. i am looking for the recovery you talked about can u please refresh the download link or share the recovery with me as the given given in the orignal post dosent work anymore. Thanks in advance

I have no Redmi7 anymore.
Sent from my MI CC9 Pro using Tapatalk

[RMX2061][RECOVERY][3.3.1-3]Unofficial TWRP for Realme 6 Pro

Code:
/*
* Your warranty is now void (or isn't ? who am I to judge ?)
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Current status
Working :
- TWRP boots
- /data decryption is working
- system and vendor partitions are mountable but you can't modify them
- You can flash magisk and modules, or custom kernel (if that's even exists since our kernel source is total mess and broken)
- Flashing stock rom.ozip works
Not working :
- USB OTG works now
- Partition formatting doesn't works (upstream)
Installation
Direct booting (fastboot boot twrp.img) is not possible, so we just have to flash it like normal
1. Disable verified boot first
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
2. Flash downloaded twrp
Code:
fastboot flash recovery twrp.img
3. Reboot to recovery
Code:
fastboot reboot recovery
Download
Google Drive
Source code
https://github.com/nullxception/twrp_device_realme_RMX2061
Thanks to @simonsmh @mauronofrio @bigbiff and many other opensource TWRP devs
XDA:DevDB Information
Unofficial TWRP for Realme 6 Pro, Tool/Utility for the Realme 6 Pro
Contributors
nullxception
Source Code: https://github.com/nullxception/twrp_device_realme_RMX2061
Version Information
Status: Stable
Current Stable Version: 3.3.1-3
Stable Release Date: 2020-06-08
Created 2020-05-31
Last Updated 2020-06-08

Reserved
Flashing stock ROM will make twrp gone, to preserve it, follow this step :
- Flash stock ROM .ozip
- Flash patched-vbmeta-v2.img
- Flash OF_avb_patcher.zip
- done, you can also reflash Magisk if you want, or just reboot
Changelog
3.3.1-3
- Support flash-backup-restore vbmeta_system and vbmeta_vendor
3.3.1-2
- Support direct .ozip (Realme Stock ROM) flash
3.3.1-1
- Fix USB OTG not detected
3.3.1-0
- Initial Release

I am using rmx 2061_11_A17. Will this flashing of twrp cause any bootloop or damage to the phone? I've already unlocked the bootloader
---------- Post added at 04:18 PM ---------- Previous post was at 04:13 PM ----------
I've flashed both files successfully. But when applying 'fastboot reboot recovery' command doesn't work when I manually go to recovery, I'm entering to the normal recovery everytime.

Muhammed159753 said:
I am using rmx 2061_11_A17. Will this flashing of twrp cause any bootloop or damage to the phone? I've already unlocked the bootloader
---------- Post added at 04:18 PM ---------- Previous post was at 04:13 PM ----------
I've flashed both files successfully. But when applying 'fastboot reboot recovery' command doesn't work when I manually go to recovery, I'm entering to the normal recovery everytime.
Click to expand...
Click to collapse
I don't get what are you trying to say, if you already flash twrp but still got a stock recovery, then you didn't flash it properly.

Ah it sucks that twrp hurdles with A10 hasn't been solved yet. 7 months already.
Anyway did you build it yourself @nullxception? Thanks alot!

Rizezky said:
Ah it sucks that twrp hurdles with A10 hasn't been solved yet. 7 months already.
Anyway did you build it yourself @nullxception? Thanks alot!
Click to expand...
Click to collapse
A/B, SaR, now Dynamic Partition, Thanks to google for adding a new layout again and again XD

Muhammed159753 said:
I've flashed both files successfully. But when applying 'fastboot reboot recovery' command doesn't work when I manually go to recovery, I'm entering to the normal recovery everytime.
Click to expand...
Click to collapse
Wait is fastboot reboot recovery even a valid command? Wasn't it adb reboot recovery and fastboot reboot. If you are booting into stock recovery that means twrp isn't flashed properly.

debdeep98 said:
Wait is fastboot reboot recovery even a valid command? Wasn't it adb reboot recovery and fastboot reboot. If you are booting into stock recovery that means twrp isn't flashed properly.
Click to expand...
Click to collapse
both adb and fastboot can reboot recovery

New build is out, version 3.3.1-1.
Changelog
- Fixed USB OTG not detected

Pro asF

nullxception said:
both adb and fastboot can reboot recovery
Click to expand...
Click to collapse
Didn't know that.. thnks bro..

Failed to mount
I success install this twrp, but always "failed to mount" to do something....
So i put back my stock recovery.....

Didisurya said:
I success install this twrp, but always "failed to mount" to do something....
So i put back my stock recovery.....
Click to expand...
Click to collapse
Read the first post, system/vendor is mountable but you can't modify them (which means read-only).
That's how Android 10 dynamic partition works, it'll fail if you try to mount system as read/write.
Why ? because the system and vendor partition is just a logical partition under the big volume called "super" partition. and generally, it has no reserved space at all to ensure that partitions aren't wasting space and are allocated to a minimum possible size.
https://source.android.com/devices/tech/ota/dynamic_partitions/implement
> So, how can I modify stuff under the /system or /vendor ?
The only way to do it is via magisk, create your own modules.
> But, how custom ROM is working on such devices like OP7 or Redmi Note 9s ?
Because it is build from the source, you'll get the whole super partition that can be flashed to the device.
> Will GApps be working too ?
Yes, overlayfs is a thing, just like how magisk works systemlessly.
If you don't like it, blame Google and buy devices that comes with Android 9.

New build is out, version 3.3.1-2
Changelog
- Support direct .ozip (Realme Stock ROM) flash
Disclaimer
Flashing stock ROM will make twrp gone, to preserve it, follow this step :
- Flash stock ROM .ozip
- Flash patched-vbmeta-v2.img
- Flash OF_avb_patcher.zip
- done, you can also reflash Magisk if you want, or just reboot
Download
https://drive.google.com/drive/folders/175UVgYa2PuKsb87VBQnOtAMxTi2OumRz
patched-vbmeta-v2.img and OF_avbpatcher.zip already in the Google Drive too

nullxception said:
New build is out, version 3.3.1-2
Changelog
- Support direct .ozip (Realme Stock ROM) flash
Disclaimer
Flashing stock ROM will make twrp gone, to preserve it, follow this step :
- Flash stock ROM .ozip
- Flash patched-vbmeta-v2.img
- Flash OF_avb_patcher.zip
- done, you can also reflash Magisk if you want, or just reboot
Download
https://drive.google.com/drive/folders/175UVgYa2PuKsb87VBQnOtAMxTi2OumRz
patched-vbmeta-v2.img and OF_avbpatcher.zip already in the Google Drive too
Click to expand...
Click to collapse
So the steps are :
- Flash stock ROM .ozip
- Flash patched-vbmeta-v2.img
- Flash TWRP
- Flash OF_avb_patcher.zip (from TWRP)
- Done, you can also reflash Magisk if you want, or just reboot
Are they correct steps or not?

Need twrp for Rmx2001 can't find
please help

Felix Siahaan said:
So the steps are :
- Flash stock ROM .ozip
- Flash patched-vbmeta-v2.img
- Flash TWRP
- Flash OF_avb_patcher.zip (from TWRP)
- Done, you can also reflash Magisk if you want, or just reboot
Are they correct steps or not?
Click to expand...
Click to collapse
Nah, you don't have to reflash twrp.
Recovery will be replaced by the system if you start booting a system that didn't yet patched.

Do you think we can flash and boot A10 gsis with it despite the twrp and A10 condition currently?
Also i've read in Oneplus 8 twrp thread that the best way to backup currently is using img format, is it also true on this build?

Rizezky said:
Do you think we can flash and boot A10 gsis with it despite the twrp and A10 condition currently?
Also i've read in Oneplus 8 twrp thread that the best way to backup currently is using img format, is it also true on this build?
Click to expand...
Click to collapse
GSI ? Idk, I'm not interested in that.
Backing up the ROM ?
You can backup super partition because both system and vendor are inside of it,
but also you have to backup the vbmeta_system and vbmeta_vendor too, I'll make an another build that can backup both vbmetas.

New build is out, version 3.3.1-3
Changelog
- Support flash-backup-restore vbmeta_system and vbmeta_vendor
Download
https://drive.google.com/drive/folders/175UVgYa2PuKsb87VBQnOtAMxTi2OumRz

[ROM][fajita][12]ArrowOS 12.0[DEAD]

Code:
*** Disclamer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Introduction
This is the ArrowOS for OnePlus 6t
Click to expand...
Click to collapse
Installation instructions
1. Install R Stock Rom onto your phone , follow some tutorial you can find in this forum
2. Flash boot.img and dtbo.img by typing fastboot flash boot boot.img and fastboot flash dtbo_a dtbo.img and fastboot flash dtbo_b dtbo.img
3. Wipe your userdata by typing fastboot erase userdata
4. Reboot the phone and immeditly do the recovery key combination
5. In Lineageos recovery select install and then sideload from adb
6. On your computer type adb sideload pathtotheromzip and press enter
7. The rom should now be flashed , flash gapps and other mods like magisk the same way
Click to expand...
Click to collapse
Download
ROM
RECOVERY
Click to expand...
Click to collapse
Changelog
Code:
Current changelog:08.11.2021
[note] 2nd Release of ArrowOS 12.0
[new] Audio works now , wifi works now , userdebug build
[changed] userdebug build now
[fixed] audio wifi
Older changelogs:
Click to expand...
Click to collapse
Code:
Current changelog:05.11.2021
[note] 1st Release of ArrowOS 12.0
[new] Android 12 R
[changed]
[fixed] Rom boots into OS
FAQ
What doesnt work ?
fingerprint,,and maybe others
This rom is for fajita only
VOLTE DONT WORK
For Gapps i recommend NikGapps
Click to expand...
Click to collapse
Thanks To/Credits
Code:
@SGCMarkus
@LuK1337
Sources
Code:
[URL="https://github.com/J0SH1X/android_kernel_oneplus_sdm845"]Kernel[/URL]
[URL="https://github.com/J0SH1X/android_device_oneplus_sdm845-common"]Common[/URL]
[URL="https://github.com/J0SH1X/android_device_oneplus_fajita"]Device[/URL]
[URL="https://github.com/J0SH1X/proprietary_vendor_oneplus"]Vendor[/URL]

Wow first 12 build. But will be wait till fixing things by dev as described. Best of luck.

omg this is a good start

Thanks waiting

I don't see in the instructions what to do with the rootfs.tar.gz file from the Recovery link.

That's a good start.

digidude512 said:
I don't see in the instructions what to do with the rootfs.tar.gz file from the Recovery link.
Click to expand...
Click to collapse
you dont , the rootfs.tar.gz is for running full desktop ubuntu on oneplus 6t

small update audio is fixed wait for next build maybe even more till then

J0SH1X said:
small update audio is fixed wait for next build maybe even more till then
Click to expand...
Click to collapse
wifi fixed fp kinda works but not quite yet

Don't understand this thing

The flashing instructions you have listed don't seem to be working for me. When i enter recovery im still in stock recovery. the dtbo.img is flashed to both slots too as well as boot.img.

koobie777 said:
The flashing instructions you have listed don't seem to be working for me. When i enter recovery im still in stock recovery. the dtbo.img is flashed to both slots too as well as boot.img.
Click to expand...
Click to collapse
try to flash boot to slot a and b , also dont expect any touch recovery its normal e3 with some extra stuff added or do you mean oneplus recovery?

New Release with fixed audio and wifi bt audio may or may not work , also fingerprint sensor will be detected now but it fails to illuminate the sensor so systemui will crash
Release fajita-20211108 · J0SH1X/Lineage-OTA
host for json response file for supporting ota updates on unoffcial lineageos || EOL FIND ANOTHER IDIOT TO DO YOUR **** - Release fajita-20211108 · J0SH1X/Lineage-OTA
github.com

J0SH1X said:
try to flash boot to slot a and b , also dont expect any touch recovery its normal e3 with some extra stuff added or do you mean oneplus recovery?
Click to expand...
Click to collapse
Yeah it booted to OnePlus recovery, your instructions though mention using the recovery buttons command I tried vol. Down + power but I also tried just booting to recovery from bootloader, both booted to OnePlus recovery. I'll try to flash boot to both slots tonight. Testing out PE A12 GSI today while I'm at work. I'll have to MSM back to stock first to try your build out. I'll also test out bugs if I get it to boot and throw a logcat up.

Hey dev do you have any telegram group we people can hope in and ask for doubts xda seems to slow the process of asking doubts id someone stuck at recovery.
I will highly appreciate of telegram is there

Tushi001 said:
Hey dev do you have any telegram group we people can hope in and ask for doubts xda seems to slow the process of asking doubts id someone stuck at recovery.
I will highly appreciate of telegram is there
Click to expand...
Click to collapse
LineageOS 19 - OnePlus 6T
Group to discuss about the Alpha Builds of LineageOS 19 based on Android 12 for the OnePlus 6T.
t.me

Can get this to boot, but can't change the recovery from the standard OnePlus recovery. As a result, sideloading .zip files fails because of signature verification (I can't see any option to disable that in the standard recovery).
Wifi is also still flaky on the latest build. It did connect once but now won't reconnect.

Happy to see arrow OS on fajita! thank you

MrUrgit said:
Can get this to boot, but can't change the recovery from the standard OnePlus recovery. As a result, sideloading .zip files fails because of signature verification (I can't see any option to disable that in the standard recovery).
Wifi is also still flaky on the latest build. It did connect once but now won't reconnect.
Click to expand...
Click to collapse
okay can you maybe provide logs or so , i dont see any iusse with wifi anymore

Did Google open source wallpaper based color themeing? I didn't keep a track recently and wanted to know id its included in custom roms like this one.