Database Develop

[ROM][UNOFFICIAL] Resurrection Remix v6.0.0 [8.1.0]

Resurrection Remix Oreo
It should go without saying, but do not lock your bootloader with this installed. You must be 100% stock, I'd suggest on both slots, in order to re-lock your bootloader. Doing otherwise will likely lead to a brick that Essential really shouldn't warranty.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Source
Device | Kernel
Here's a local_manifest for those who want to build at home.
Prerequisites
Unlocked boot loader
FLASH THIS FIRMWARE BEFORE YOU BEGIN
OPM1.180104.092 firmware - even if you were on this build, you should flash this firmware package to ensure the firmware is on BOTH slots.(Use flash.bat to install)
Fastboot, ADB and essential phone driver from their website
NOOB Proof Guide to install the Rom, Future Updates and Rooting the rom:silly::silly::victory:
Downloads
ROM BUILD 4 (Build 4 With May security patch)
(Flash This arm 64 nano gapps flash after rebooting again to twrp recovery and select partition A)
Boot into recovery mode and wipe user data
Then reboot to bootloader
with Fastboot, you can use this command:
Code:
fastboot getvar current-slot
This will show you the current partition the phone is in
If it is in partition B skip the next step
If it is in Partition A then execute next command
Code:
fastboot set_active other
Download twrp and flash it with this command:
Code:
fastboot flash boot twrp-mata_11.img
While still in bootloader mode, use vol down to select "Recovery mode" and hit the power button. This should boot you in to TWRP.
In recovery go to reboot and set partition to A
Then flash the rom
after that reboot to twrp recovery again and select partition A and flash gapps zip
Wipe data
When finished, reboot.
Profit!
FLASHING FUTURE UPDATES AS THIS ROM DOES NOT SUPPORT SEEMLESS UPDATES
Turn off security pin/fingerprint etc
Reboot to Fastboot
In Fastboot, you can use this command:
Code:
fastboot getvar current-slot
The output should be partition A
If not execute next command(we need it to be on B)
Code:
fastboot set_active other
This should set the Partiton to B
Reboot to recovery from within the bootloader
TWRP Should boot
Set partition to A in reboot option
Then flash the rom
after that reboot again to twrp recovery again and select partition A and flash gapps zip
then Reboot
SETTING UP ROOT USING THE BOOT.IMG
After setting up the device, download the boot.img from nutrino kernel thread and install magisk manager and patch the boot.img using magisk
copy patched boot to pc
reboot to bootloader
Flash the patched boot.img via fastboot
You should be able to boot properly and with magisk enabled and root
XDA:DevDB Information
Resurrection Remix v6.0.0, ROM for the Essential Phone
Contributors
Ashwin Prabhunerurkar
Source Code: https://github.com/ResurrectionRemix
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Beta
Created 2018-03-20
Last Updated 2018-03-19

General Information
*Play Store keeps hanging up on restoring apps? A reset starts the restore again, but hangs up after a few apps are installed.
A)You need to force stop the play store app in setting, and then open it again
Build 3 Notes
with april security patch and bug fixes released
Flash nutrino kernel for best performance
ALSO Even though gapps are included in the build they dont work for some reason on dirty flashing
So Also download the gapps i have included in the OP and flash right after the rom without reboot
If you have any random user app fcs
uninstall the app and redownload from playstore
Enjoy!!

one more

Thanks Dev, for bringing up this ROM to this device.

The guide and all links are online
Enjoyyy!!

Delete

Let me know if everything works properly as i havent tested this particular build

Delete

gflexstump said:
I will been on splash screen for 5 minutes, Will update once it boots
Click to expand...
Click to collapse
did u wipe data?
Did u flash any other gaaps or zips?

Delete

Delete

I'm letting it boot while I take a shower I'll report when back. I really want this rom to work

Nice, have read lots of good things about this rom.

Delete

Delete

20 mins no boot ?

I have replaced the link with a older version that i am using currently
please try that

Ashwin Prabhunerurkar said:
I have replaced the link with a older version that i am using currently
please try that
Click to expand...
Click to collapse
any difference between this older one and the new one that wouldn't boot?
Also with this version we have to flash gapps? which do we flash?

DolphiinHD said:
any difference between this older one and the new one that wouldn't boot?
Also with this version we have to flash gapps? which do we flash?
Click to expand...
Click to collapse
This is the build i tested
It does not include gaaps
I built gaaps into the rom for todays built but i guess something got messed up
Keeping this rom as experimental for now until i remember how i flashed gaaps with the current build

Guys who try the New build without gaaps do not flash gaaps for now and let me know if this build boots

[DISCONTINUED][RECOVERY] TWRP 3.3.x for Realme 3 Pro

Mod Announcement: All links removed on request of OP.
This TWRP recovery Is compiled from source & will be supported officially soon
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Prerequisites
1. Unlocked bootloader.
Bugs
1. No bugs
2. If you have found a bug, please consider posting it to my ....
Instructions
1. Go to the fastboot mode.
2. Download the recovery.img and transfer it to the adb folder.
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
5. After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery twrp-name.img
6. Then flash super su zip to avoid stock recovery to overwrite twrp recovery.
Downloads
Android File Host: ...
Official TWRP Page: ...
XDA:DevDB Information
TWRP For Realme 3 Pro
Contributors
chankruze
Source Code: ...
Version Information
Status: Beta
Based on: TWRP
Created 2019-05-26
Last Updated 2019-06-04

Reserved
Everything is normal
No Root For Now
Flashing Magisk will brick and cause bootloop (working on it)
Flashing SuperSU will not cause any issue but it is unable to install su binary (working on it too)

Please build for Realme 3 too

Good work chandan keep it up !

great. mantul

Thanks for giving a start to our device dev
P.S - How to unlock bootloader ?

great job...!!! Trying it soon..:good::good:

Well thats why i believed that i wont regret after buying thus device. Thnx bro

Is our device already unlock? And please help to build a way to Full Flash our device something bad happen
thank you for your work, hope this device will have Custom Rom soon (Miui 10)

Awesome. Keep the Good work up.

Awesome, development started for realme 3 pro. Keep going[emoji106].
Sent from my RMX1851 using Tapatalk

stuck logo realme powered by android
i tested on coloros not android Q

artmomeymi5 said:
stuck logo realme powered by android
i tested on coloros not android Q
Click to expand...
Click to collapse
Test the new updated build (link updated in OP)
Mod edit: Link removed on request of OP.

How to UBL?anyone can share step by step?

Well Done Bro When we will taste custom roms ?

Samdroid18 said:
Thanks for giving a start to our device dev
P.S - How to unlock bootloader ?
Click to expand...
Click to collapse
?
https://c.realme.com/in/post-details/1134295513231785984

Stuk on logo twrp
dude i need your help,,after UBL and flash twrp, i,ve got stuck on twrp logo, and now my recovery cant be access, need heelp

burk44 said:
dude i need your help,,after UBL and flash twrp, i,ve got stuck on twrp logo, and now my recovery cant be access, need heelp
Click to expand...
Click to collapse
I also experienced the same problem, stuck on the twrp logo

anabhi said:
Good work chandan keep it up !
Click to expand...
Click to collapse
Anabhi bro anything for realme 3 pro from your side..
Btw good work you did for for realme 2 pro

@chankruze thanks for the initial twrp bringup buddy , want to know does it support flashing magisk?

[PBRP][UNOFFICIAL] Pitch Black Recovery for Realme 3 Pro [v2.9.0]

Pitch Black Recovery For Realme 3 Pro
Note: This going to be official soon
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this project
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Pitch Black Recovery Project (PBRP) is a custom recovery project based on Team Win Recovery Project (TWRP) developed by Reza Adi, maintained by Manjot Sidhu and Mohd Faraz and themed by FireWolf.
Prerequisites
1. Unlocked bootloader.
Bugs
1. No bugs, test it's those sides which others haven't tested yet
2. If you have found a bug, please consider posting it to my GitHub Issues.
Instructions
Method 1 (Fastboot Installation)
1. Go to the fastboot mode.
2. Download the PitchBlack-charlie-001.img and transfer it to the adb folder (rename is optional for simplicity).
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
5. After that we will flash this PBRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery PitchBlack-charlie-001.img
BooM ! PBRP flashed successfully.
Method 2 (TWRP Installation)
1. As far i know there is an official [STABLE] twrp. If you have it installed in your device, then this is just a piece of cake
2. Flash PitchBlack-charlie-2.9.0-20190606-1814-UNOFFICIAL.zip from twrp.
3. It will reboot to recovery automatically after that.
BooM ! PBRP flashed successfully.
Notes
DM-Verity patch added to flashable zip
Force Encryption patch also added to flashable zip
Downloads
Recovery Image => https://www.androidfilehost.com/?fid=6006931924117932101
Flashable Zip => https://www.androidfilehost.com/?fid=6006931924117932103
Mirror (For both)=> http://recovery.geekofia.in/ *Only up when i am building
XDA:DevDB Information
Pitch Black Recovery For Realme 3 Pro, Kernel for the Realme 3 Pro
Contributors
chankruze
Source Code: https://github.com/N00bTree/android_device_realme_charlie
Kernel Special Features:
Version Information
Status: Beta
Created 2019-06-06
Last Updated 2019-08-08

Reserved
There are some changes made for gapps and other miner things.
This is due to low bandwith i am unable to sync and build, and my vm is also expired due to high unpaid bills.
So no hope for updates from me.

Reserved
What's new in 8th August Update:
* Crypto disabled (general & FBE)
* Header version also disabled, will be auto generated.

boom

For realme 3 mediatek too please

Bro psl consider making custom rom rom for real me 3 pro its color os is worst,if u can make make miui or lineage os pls pls dear

If you want miUI, go buy a note 7.....miUI is a worse garbage than ColorOS.

Bro i want a stable rom make any rom and in comparison to color os miui is far better

Can flash magisk ?

jack baghel said:
Bro i want a stable rom make any rom and in comparison to color os miui is far better
Click to expand...
Click to collapse
Oh please. As I'm using ColorOS, i think it is better than that crappy advert-full MiUI. But I'm sincerely waiting for LineageOS, Pixel Experience or just stock Pie/Q
Cookie Ninja said:
If you want miUI, go buy a note 7.....miUI is a worse garbage than ColorOS.
Click to expand...
Click to collapse
True that.

Bro miui rom ka new version ya oxygen os or crdroid rom bi bnao na realme 3 pro keliye plx

My device already unlocked
Test flash via fastbot with .img file, result = boot destroyed
Test flash via TWRP with .zip file with no error result , result = boot destroyed
So, This recovery can't install properly on my realme 3 pro
and so , anyone have boot.img from stock realme 3 pro rom ??
my device can't boot to system/recovery , after I start the device. there is something like " boot/recovery destroyed"
but I still open my bootloader/fastboot and try to flash twrp official and same result, cant boot
anyone can help ?

Why U developer dont start to make custom roms plz make I eagerly waiting for this even not me too much person waiting for this If u make then very thankfull even we start donation also

puttr said:
My device already unlocked
Test flash via fastbot with .img file, result = boot destroyed
Test flash via TWRP with .zip file with no error result , result = boot destroyed
So, This recovery can't install properly on my realme 3 pro
and so , anyone have boot.img from stock realme 3 pro rom ??
my device can't boot to system/recovery , after I start the device. there is something like " boot/recovery destroyed"
but I still open my bootloader/fastboot and try to flash twrp official and same result, cant boot
anyone can help ?
Click to expand...
Click to collapse
What version of firmware do you have?

Asking people make custom ROMs is kinda not Ok. "make this ROM pls". When they want to do it, they'll do. Just wait for someone to release.

https://chat.whatsapp.com/FIXqnbGXTWa4SSScVt5zax what's app grp for realme3 pro

Can we expect any update for this good recovery....? @chankruze

THREAD CLOSED on behalf of OP!

[ROM][RMX1971][9.0.0][UNOFFICIAL] LineageOS 16.0 for Realme 5 Pro / Realme Q

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
Back camera
Front camera
Audio
Sensors
Flash
GPS
VoLTE
Known issues :
Selinux permissive
Report with logcat if found any
Instructions :
Download the latest build
Reboot to recovery
Make sure you're using stock unmodified vendor.
Wipe data, cache, system ( Don't wipe vendor )
Flash the latest build and GApps
Reboot
Downloads :
Unofficial Builds : Click Here
Source :
Device tree
Kernel tree
Credits :
@SagarMakhar for his work on Realme X
Thanks to all testers who helped in testing
XDA:DevDB Information
[ROM][RMX1971][9.0.0][UNOFFICIAL] LineageOS 16.0, ROM for the Realme 5 Pro
Contributors
thesprintster, SagarMakhar
Source Code: https://github.com/lineageos
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: TWRP
Based On: Lineage OS
Version Information
Status: Stable
Created 2019-10-18
Last Updated 2019-10-18

Screenshots:
Changelog:
20191018: Initial build
20191109: Here
20191116: Here

Amazing job brother
using as daily driver from last 2 weeks ^_^
Everything Works perfect , Stable ROM :fingers-crossed::laugh:
note :
Keep ambiance display (Always-on display) off ( because our touch drivers are outdated ;p touch doesn't work after booting device, need to press power button on and off to get touch working and with ambiance display on screen doesn't sleep so touch won't work ;p so simple keep it off ;p )
this should get fixed in upcoming builds so relax

yog12 said:
Amazing job brother
Click to expand...
Click to collapse
have you tried it?
---------- Post added at 05:43 AM ---------- Previous post was at 05:34 AM ----------
thesprintster said:
Screenshots:
View attachment 4847829 View attachment 4847831 View attachment 4847833 View attachment 4847835 View attachment 4847837
Changelog:
20191018: Initial build
Click to expand...
Click to collapse
how about the camera quality? is it similar?

:silly: Yeaaaay... gonna try soon..

will try today..

Good job bro

iam flashing bug failed to mount '/system_root'
my devices realme Q

what is the purpose of vbmeta.img?

star.vest2 said:
what is the purpose of vbmeta.img?
Click to expand...
Click to collapse
Do you need to flash this vbmeta.img as well or just the rom?

Touch is not working
thesprintster said:
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
Back camera
Front camera
Audio
Sensors
Flash
GPS
VoLTE
Fingerprint
Known issues :
Selinux permissive
Report with logcat if found any
Instructions :
Download the latest build
Reboot to recovery
Make sure you're using stock unmodified vendor.
Wipe data, cache, system ( Don't wipe vendor )
Flash the latest build and GApps
Reboot
Downloads :
Unofficial Builds : Click Here
Source :
Device tree
Kernel tree
Credits :
@SagarMakhar for his work on Realme X
Thanks to all testers who helped in testing
XDA:DevDB Information
[ROM][RMX1971][9.0.0][UNOFFICIAL] LineageOS 16.0, ROM for the Realme 5 Pro
Contributors
thesprintster, SagarMakhar
Source Code: https://github.com/lineageos
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: TWRP
Based On: Lineage OS
Version Information
Status: Stable
Created 2019-10-18
Last Updated 2019-10-18
Click to expand...
Click to collapse
touch is not working.
it was working initially then screen became irresponsive on reboot

Karan Yuvraj Singh said:
touch is not working.
it was working initially then screen became irresponsive on reboot
Click to expand...
Click to collapse
U have to flash it again.. Turn of ambient diaply immediately after booting.. There is some.problem with that..

How is it, is there any serious bug in this rom?
How is the camera quality? Can i still use the wide angle lens as well? How if i wanna go back to Color Os? Vooc still working?

mfauzanalg said:
How is it, is there any serious bug in this rom?
How is the camera quality? Can i still use the wide angle lens as well? How if i wanna go back to Color Os? Vooc still working?
Click to expand...
Click to collapse
Can't even flash lineage os with the twrp recovery provided by the same guy. I'm stuck in recovery now and can't flash a single thing for system_root cannot be mounted invalid anrgument. Don't try this.

greenys' said:
Can't even flash lineage os with the twrp recovery provided by the same guy. I'm stuck in recovery now and can't flash a single thing for system_root cannot be mounted invalid anrgument. Don't try this.
Click to expand...
Click to collapse
Hmmm, so what can you do noww to repair it? I rlly want aosp rom on my device (( i dont like color os (

Karan Yuvraj Singh said:
touch is not working.
it was working initially then screen became irresponsive on reboot
Click to expand...
Click to collapse
jijoejoe123 said:
U have to flash it again.. Turn of ambient diaply immediately after booting.. There is some.problem with that..
Click to expand...
Click to collapse
WIll address it in next build
greenys' said:
Can't even flash lineage os with the twrp recovery provided by the same guy. I'm stuck in recovery now and can't flash a single thing for system_root cannot be mounted invalid anrgument. Don't try this.
Click to expand...
Click to collapse
Some Non indian firmware devices are facing trouble while flashing. I have to inspect it

JominatorX said:
Do you need to flash this vbmeta.img as well or just the rom?
Click to expand...
Click to collapse
i don't know the author included it in the download page, so i'm asking

star.vest2 said:
i don't know the author included it in the download page, so i'm asking
Click to expand...
Click to collapse
-----------------------------
TWRP flashing and LenageOS installation REALME 5 pro/Q
1)make sure that your bootloader is unlocked.
you can vist this link https://c.realme.com/in/post-details/1184734239149522944 OR
this youtube video
for referance
2)after you have a unlocked bootloader, download the neccessory files required in your PC
===>platform tools (fastboot files) link: https://dl.google.com/android/repository/platform-tools-latest-windows.zip
===>TWRP recovery img . link: https://drive.google.com/drive/folders/1_pRUK4bj74N6xErkpFLr--2GoKyGxUtl
===> vbmeta img . link: https://drive.google.com/file/d/1kq9rV3eF8rYAUwmUvXo-8vttYIhVcQCb/view
===>Leneage OS for realme 5 pro . link:https://drive.google.com/drive/folders/1wa4bllIa6WgH1STAszdxC_xkBTEHDSiT
3) once you have all the files
flash the vbmeta.img with fastboot..
COMMAND : fastboot flash vbmeta vbmeta.img
4) after that flash the recovery
COMMAND: fastboot flash recovery twrp-RMX1971-20191018.img
5) after that reboot into recovery by pressing the volume button on your phone and see " reboot recovery" in a red font
and press power button when u see that.
--.OPTIANAL AND RISKY step {IF YOU WANT TO BOOT INTO COLOROS AFTER INSTALLING TWRP, FLASH THE TWRP RECOVERY IMG AS BOOT ,i dont know this work in new twrp.but worked for me(fastboot flash boot twrp-RMX1971-20191018.img )}
6)after u successfully get the twrp menu make a backup of your whole system(all partitions) in case something goes wrong and move the backup into a lap or memory card
7)install the LenageOS and gapps . and reboot into fastboot mode and do step 3 again but this time flash vbmeta.img from this link:https://drive.google.com/drive/folders/1wa4bllIa6WgH1STAszdxC_xkBTEHDSiT
8) wipe the whole data partition
9) reboot normally.
IN CASE YOU ARE STUCK IN THE RECOVERY MODE OR FASTBOOT MODE FEEL FREE TO CONTACT ME @azharsalim135

thanks man i managed to boot after i flashed the vbmeta, but any lockscreen method doesn't work. And i forgot to backup the color os so i can't get back to it. Any ideas how to flash magisk? @jijoejoe123

jijoejoe123 said:
-----------------------------
TWRP flashing and LenageOS installation REALME 5 pro/Q
1)make sure that your bootloader is unlocked.
you can vist this link https://c.realme.com/in/post-details/1184734239149522944 OR
this youtube video
for referance
2)after you have a unlocked bootloader, download the neccessory files required in your PC
===>platform tools (fastboot files) link: https://dl.google.com/android/repository/platform-tools-latest-windows.zip
===>TWRP recovery img . link: https://drive.google.com/drive/folders/1_pRUK4bj74N6xErkpFLr--2GoKyGxUtl
===> vbmeta img . link: https://drive.google.com/file/d/1kq9rV3eF8rYAUwmUvXo-8vttYIhVcQCb/view
===>Leneage OS for realme 5 pro . link:https://drive.google.com/drive/folders/1wa4bllIa6WgH1STAszdxC_xkBTEHDSiT
3) once you have all the files
flash the vbmeta.img with fastboot..
COMMAND : fastboot flash vbmeta vbmeta.img
4) after that flash the recovery
COMMAND: fastboot flash recovery twrp-RMX1971-20191018.img
5) after that reboot into recovery by pressing the volume button on your phone and see " reboot recovery" in a red font
and press power button when u see that.
--.OPTIANAL AND RISKY step {IF YOU WANT TO BOOT INTO COLOROS AFTER INSTALLING TWRP, FLASH THE TWRP RECOVERY IMG AS BOOT ,i dont know this work in new twrp.but worked for me(fastboot flash boot twrp-RMX1971-20191018.img )}
6)after u successfully get the twrp menu make a backup of your whole system(all partitions) in case something goes wrong and move the backup into a lap or memory card
7)install the LenageOS and gapps . and reboot into fastboot mode and do step 3 again but this time flash vbmeta.img from this link:https://drive.google.com/drive/folders/1wa4bllIa6WgH1STAszdxC_xkBTEHDSiT
8) wipe the whole data partition
9) reboot normally.
IN CASE YOU ARE STUCK IN THE RECOVERY MODE OR FASTBOOT MODE FEEL FREE TO CONTACT ME @azharsalim135
Click to expand...
Click to collapse
Nothing changes. Still can't flash a thing from twrp. Error: 7, failed to mount /system_root (invalid argument)

EMUI 4.1 ROM for ALE-L21

I have installed the B895 ROM, downloaded from https://androidfilehost.com/?fid=961840155545586099.
Also i have a question - will the Sim-Lock go away if i flash LineageOS?
Can someone tell me if there is a ROM without Vodafone SIM Lock? Also i have installed TWRP from there:
[Recovery][BKL][EMUI 8.x only][Unofficial]TWRP 3.2.1-0 [14/04/2018]
Disclaimer This software comes wth no warranty,XDA staff ,myself or TeamWin stuff can't be hold responsible for any damage it may cause to your device. Note: Currently Oreo 8.1 custom roms are supported only on BKL-L04 with EMUI 8.1 Download...
forum.xda-developers.com
Also i installed Magisk with TWRP, it seems that it has worked, because when i select internal storage over TWRP Menu it shows the capacity of it.
But i cannot open Magisk in System, it only displays it as an android app.
Also if i try installing LineageOS from
https://forum.xda-developers.com/t/rom-ota-7-1-2-lineageos-14-1-for-p8-lite.3824247/
It displays the output in the attached picture. Does someone know a workaround for that?