I have installed the B895 ROM, downloaded from https://androidfilehost.com/?fid=961840155545586099.
Also i have a question - will the Sim-Lock go away if i flash LineageOS?
Can someone tell me if there is a ROM without Vodafone SIM Lock? Also i have installed TWRP from there:
[Recovery][BKL][EMUI 8.x only][Unofficial]TWRP 3.2.1-0 [14/04/2018]
Disclaimer This software comes wth no warranty,XDA staff ,myself or TeamWin stuff can't be hold responsible for any damage it may cause to your device. Note: Currently Oreo 8.1 custom roms are supported only on BKL-L04 with EMUI 8.1 Download...
forum.xda-developers.com
Also i installed Magisk with TWRP, it seems that it has worked, because when i select internal storage over TWRP Menu it shows the capacity of it.
But i cannot open Magisk in System, it only displays it as an android app.
Also if i try installing LineageOS from
https://forum.xda-developers.com/t/rom-ota-7-1-2-lineageos-14-1-for-p8-lite.3824247/
It displays the output in the attached picture. Does someone know a workaround for that?
Related
So I installed a version of the P9 OS EVAL09 from here - https://forum.xda-developers.com/p9/development/bluewei-test-crossflash-to-l09-c432-t3608270 the B387 version.
Prior to this, I was running unofficial CM 13 with TWRP installed, and it worked mostly fine.
The B387 .zip had a .update log which I was supposed to install via SDcard upgrade or something like that, however instead I removed a few lines from the update binary and installed via TWRP (in hindsight, probably what caused this problem).
Since then, I have launched into the new ROM with the purpose of updating, then moving to the unofficial Lineage OS.
However, I have encountered the biggest problem which is that, when I tried to reaccess TWRP it would automatically redirect to Huawei eRecovery, which does not allow me to reset/upgrade (as it says package info isn't correct).
I then tried to redo the process of flashing TWRP via ADB fastboot, and then it says that writing recovery has failed.
I can't download the stock ROM from huawei hicloud from the thread here - https://forum.xda-developers.com/p9/development/rom-stock-rom-eva-l19c636b168-t3419586 - as it always says the website is unavailable.
So far, the current OS installed is unusable, and I do not have any custom recovery software. If I can get TWRP to work again, then I should be ok as I made backups before.
edit 2018-01-18: The fix is to make the dload folder in the sd card and hard flash the ROM, which will get me back to a working stable version.
I can't find the way to get my Huawei P10 to Stock. Huawei eRecovery is not working for me: Getting package info failed.
I'm currently on LineageOS 15.1
I have same problem. Anything I try to flash via TWRP gives me error messages. Tried download several files with same results. Also trying to flash Google apps package comes up with version error. Even thou system images for treble project are version 8.1 it asks me to flash gapps version 7.1.2.
I also am stuck with this system image. Can not use e-recovery to restore stock system.
On top of that I was silly enough to not make backup of my previous installation.
There are plenty tutorials on how to flash project treble images but not so many of how to revert back to stock. Especially huawei devices are nowhere to be seen.
Resurrection Remix
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
Requirements:
Honor 9i (RNE- L22)
I don't know if this will work on the other variants like RNE-L21, L23.
Your device MUST have an unlockable bootloader.
Your device MUST be Project Treble compatible. That means your device meets one of the following criteria:
Your device LAUNCHED with Android 8.0 Oreo or a newer version (eg. Android 8.1 Oreo) AND is Google Play certified. (If you rooted your device/flashed another custom ROM and somehow ended up with your device being listed as uncertified in Google Play, then don’t worry. We’re only concerned about the status of the device as it was shipped.)
Your device UPGRADED to Android 8.0 Oreo or a newer version AND was made Project Treble compatible by the manufacturer. See this article for a list of such devices.
For honor 9i(RNE-L22) u need to be in EMUI 8.0 otherwise u wont be able to flash this rom.
NOTE - ROM INCLUDES GAPPS AND SU (ROOTED)
ROM link - RESURRECTION REMIX
How to flash GSI system image? -
- CHANGE the ROM img file name to RROS
- copy the downloaded rom image file to the adb folder
- now once you are in that folder press and hold the shift key and right-click in the blank area , now select open command window here.
- Now u r in CMD enter the following code.
(Don't change any thing)
type - fastboot devices
(check if it shows any device if shows then process further or else install adb system wide properly)
type - fastboot -w
(this will wipe everything from your phone so before doing this take backup)
type - fastboot flash system RROS.img
(this will flash the rom)
when flash is finished
type - fastboot reboot.
HERE IS THE TRICKY PART
AFTER REBOOTING SYSTEM HUWAIE eRECOVERY WILL ASK TO FORMAT THE DATA PARTITION , DO THAT, AFTER THAT IT MAY AGAIN TAKE YOU TO RECOVERY, DO A SIMPLE FACTORY RESET AND REBOOT SYSTEM
NOW GIVE IT SOME TIME TO BOOT UP
Note: all the credit goes to the GSI image developer @phh
A big thanks to @KingofMezi for the recovery.
Please hit the thanks button for me.
Will add screenshot soon.
XDA:DevDB Information
Official Ressurection Remix 8.1, ROM for the Honor 9i
Contributors
sknoman1
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 8.0
Based On: AOSP
Version Information
Status: Stable
Created 2018-07-19
Last Updated 2018-07-19
VoLTE support?
AnantNigam said:
VoLTE support?
Click to expand...
Click to collapse
No there is no VOLTE support for now.. There isn't any treble rom that supports volte
But developers are working on it..
is this different from this rr rom? https://forum.xda-developers.com/ho...rrection-remix8-1-gsi-treble-project-t3807126
Hi can I wipe in adb commands? the fastboot -w doesn't work on my device. Also, where's the link for the adb?
Hi since the bootloader unlocking service is no longer supported by Huawei/ Honor team is there any other method available that could assist me with installing this ROM.
Hello,
I am new to the world of custom ROMs, I have a huawei mediapad T5. I followed the guide and successfully rooted my device. then I installed TWRP from this link:
https://forum.xda-developers.com/showpost.php?do=showpost&p=76362629
I struggled to flash lineageos 16 on my device, after couple of hours, I found the installation guide from openkirin, that mentioned they don't support TWRP. but as I had already flashed my device with TWRP, I had no backup for stock recovery image. I tried to flash it anyway as mentioned in the openkirin site.
but now it stuck at TWRP screen. I am not sure how can I remove twrp completely from my mediapad t5.
After messing around I managed to boot into eRecovery from huawei, where I got option to download the stock firmware. that saved my day.
But I really want to flash it with LineageOS 16. I am not sure what can be done about twrp. Is there any way to remove it from my Mediapad, or is there any guide to install Open Kirin's LineageOS image onto my device along with TWRP?
Please let me know.
#Update
I managed to install Lineage OS onto my Mediapad T5. But I am afraid, I didn't like it much. It is not optimized for the tablet. There're unnecessary apps like Phone App, Messaging App etc. I only got Wifi version. Plus it has issues with Audio Output.
I am reverting back to stock ROM for now, Until better ROM is available from OpenKirin.
gunpal5 said:
Hello,
I am new to the world of custom ROMs, I have a huawei mediapad T5. I followed the guide and successfully rooted my device. then I installed TWRP from this link:
https://forum.xda-developers.com/showpost.php?do=showpost&p=76362629
I struggled to flash lineageos 16 on my device, after couple of hours, I found the installation guide from openkirin, that mentioned they don't support TWRP. but as I had already flashed my device with TWRP, I had no backup for stock recovery image. I tried to flash it anyway as mentioned in the openkirin site.
but now it stuck at TWRP screen. I am not sure how can I remove twrp completely from my mediapad t5.
After messing around I managed to boot into eRecovery from huawei, where I got option to download the stock firmware. that saved my day.
But I really want to flash it with LineageOS 16. I am not sure what can be done about twrp. Is there any way to remove it from my Mediapad, or is there any guide to install Open Kirin's LineageOS image onto my device along with TWRP?
Please let me know.
#Update
I managed to install Lineage OS onto my Mediapad T5. But I am afraid, I didn't like it much. It is not optimized for the tablet. There're unnecessary apps like Phone App, Messaging App etc. I only got Wifi version. Plus it has issues with Audio Output.
I am reverting back to stock ROM for now, Until better ROM is available from OpenKirin.
Click to expand...
Click to collapse
Try LOS18.1 (very VERY smooth) --> https://forum.xda-developers.com/t/...ation-guide-for-mediapad-t5-ags2-xxx.4291431/
Fosanz said:
Try LOS18.1 (very VERY smooth) --> https://forum.xda-developers.com/t/...ation-guide-for-mediapad-t5-ags2-xxx.4291431/
Click to expand...
Click to collapse
How safe is this unofficial LOS18.1 ROM?
gunpal5 said:
How safe is this unofficial LOS18.1 ROM?
Click to expand...
Click to collapse
I use it everyday so. Very safe I'm gonna say
Hello everyone,
I am wondering if anyone else is experiencing problems when installing lineage OS 19.1 on the galaxy s10 (SM-G973F/DS). I followed precisely the steps from the documentation (https://wiki.lineageos.org/devices/beyond1lte/install) but lineage os will not boot. The error shown on the device after trying to boot Lineage OS is : "Can't load android system. Your data may be corrupt."
My initial goal was to setup Lineage OS 19.1 with Mind the Gaps from the official website https://androidfilehost.com/?w=files&flid=322935.
I tried the following several times:
* Wiping the phone several times and installing different lineageOS nightly builds with different versions of Mind the Gapps. -> Did not work
* Wiping the phone and installing lineage OS without mind the gapps. -> did not work
* I tried both ways with windows and linux -> did not work
* I installed the newest firmware with odin and through the stock roms capability to update the system -> still, same result
I google a lot and could not find any s10 owners, experiencing the same problems. Maybe anyone of you guys has a clue.
Thanks in advance.
zehbauer said:
Hello everyone,
I am wondering if anyone else is experiencing problems when installing lineage OS 19.1 on the galaxy s10 (SM-G973F/DS). I followed precisely the steps from the documentation (https://wiki.lineageos.org/devices/beyond1lte/install) but lineage os will not boot. The error shown on the device after trying to boot Lineage OS is : "Can't load android system. Your data may be corrupt."
My initial goal was to setup Lineage OS 19.1 with Mind the Gaps from the official website https://androidfilehost.com/?w=files&flid=322935.
I tried the following several times:
* Wiping the phone several times and installing different lineageOS nightly builds with different versions of Mind the Gapps. -> Did not work
* Wiping the phone and installing lineage OS without mind the gapps. -> did not work
* I tried both ways with windows and linux -> did not work
* I installed the newest firmware with odin and through the stock roms capability to update the system -> still, same result
I google a lot and could not find any s10 owners, experiencing the same problems. Maybe anyone of you guys has a clue.
Thanks in advance.
Click to expand...
Click to collapse
Try here:
[ROM][OFFICIAL] LineageOS 19 for Galaxy S10e/S10/S10+/S10 5G Exynos
LineageOS is a free, community built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project with extra...
forum.xda-developers.com
Info about beyond1lte | LineageOS Wiki
wiki.lineageos.org
ZmisiS said:
Try here:
[ROM][OFFICIAL] LineageOS 19 for Galaxy S10e/S10/S10+/S10 5G Exynos
LineageOS is a free, community built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project with extra...
forum.xda-developers.com
Info about beyond1lte | LineageOS Wiki
wiki.lineageos.org
Click to expand...
Click to collapse
Thanks for your reply. Unfortunately I already tried it.
Just did it again to be sure:
* Flash system and install firmware update via Heimdall.
* Installed lineageOS with Mind the Gapps -> Same error
* Insatlled lineageOS without gapps -> same error
zehbauer said:
Thanks for your reply. Unfortunately I already tried it.
Just did it again to be sure:
* Flash system and install firmware update via Heimdall.
* Installed lineageOS with Mind the Gapps -> Same error
* Insatlled lineageOS without gapps -> same error
Click to expand...
Click to collapse
I not installed with Heimdall. I don't know about it.
The first make Backup all what you have on Android.
I downloaded last Build for my phone. https://download.lineageos.org/beyond1lte
I downloaded latest Firmware for SM-G973F https://lineage.linux4.de/fw_update/beyond1lte.html and I installed this with ODIN.
I installed this Gapps http://downloads.codefi.re/jdcteam/...MindTheGapps-12.1.0-arm64-20220605_112439.zip
I installed Lineage Recovery with ODIN https://mirrorbits.lineageos.org/re...lineage-19.1-20220909-recovery-beyond1lte.img
Recovery.img convert to .tar with 7zip. Right-click on Recovery.img, in the context menu select 7zip and in the drop-down menu select 'Add to archive'. When the window opens, select tar at the top and click OK at the bottom. and that's it.
Lineage OS and Gapps paste on SD Card.
Firmware and Recovery use in BL slot. The first install firmware. After install firmvare, again open download mode adn use Recovery tar in BL slot. ODIN open as Administrator. In Option switch off Auto Reboot. Click on Start. When it's done, press the Power + Volume Down keys together. When the black screen appears, press the Power + Volume UP + Bixby keys together. Hold until Lineage Recovery opens. In recovery, go to Factory reset and the other two reset options. In Recovery, choose to install from the SD card, if the no and yes options appear during the installation, choose yes and wait for everything to finish. After that, choose to install from the SD card again and choose to install Gapps. After these installations, if you are asked to accept the upgrade, accept it. After that, select Reboot system now in Recovery and wait for everything to finish.
Thanks again for replying. It looks like the Gapps 12.1 did the trick. In the next days I will finish the installation.