Hi there.
My phone could not connect both sim cards to the carrier after flashing some recent custom roms like RR and xeonHD. in that roms when I set my first Sim as data sim, the second Sim starts to connect to the carrier and have a signal and vice versa.
I've tried to flash the latest miui rom with miflash but it won't work.
Related
Every time I flash a new ROM, the SIM is corrupted and I can't connect to AT&T.
SIM card was out before and during flash.
USB disconnected during flash.
The APN Settings are fine.
I even put a good, working SIM card (from another phone) in the device and I got service. I also put the bad SIM in the other phone and it ALSO got no service.
The APN settings are equal on both phones.
I had to go to AT&T and get a new SIM activated. I do not want to do this every time I flash a new ROM.
Rikusaki said:
Every time I flash a new ROM, the SIM is corrupted and I can't connect to AT&T.
SIM card was out before and during flash.
USB disconnected during flash.
The APN Settings are fine.
I even put a good, working SIM card (from another phone) in the device and I got service. I also put the bad SIM in the other phone and it ALSO got no service.
The APN settings are equal on both phones.
I had to go to AT&T and get a new SIM activated. I do not want to do this every time I flash a new ROM.
Click to expand...
Click to collapse
Bad luck. There is no way your phone picks and chooses what sim card to mess up after flashing (you said it corrupted your sim card, but not another one you tried?), and if it does you need to find a new phone
rootnik said:
Bad luck. There is no way your phone picks and chooses what sim card to mess up after flashing (you said it corrupted your sim card, but not another one you tried?), and if it does you need to find a new phone
Click to expand...
Click to collapse
It did this on two different phones with two different roms (Darky 8 and Pheonix 2.5).
Rikusaki said:
It did this on two different phones with two different roms (Darky 8 and Pheonix 2.5).
Click to expand...
Click to collapse
This is just highly unlikely, especially if you did everything you claimed to do (removing the sim card, unplugged during flashing, etc)
Hi All. I have quite a strange case of my SIM card not being recognised by my Xiaomi Mi3W.
Here's what happed.
1) Purchased phone off friend with stock MIUI - all working
2) Inserted my SIM with mobile carrier A (still with stock MIUI) - all working
3) Flashed Cyanogenmod 12.1 Cancro on phone - all working
4) 3 days later, changed mobile carrier to carrier B - not working
Original SIM card from carrier A was in phone when my account with carrier A was erased.
Since my number was ported from carrier A to carrier B, the phone has had issues recognising SIM cards.
5) SIM card from carrier B not working, and neither are other SIM cards
6) I have checked with carrier B and my phone is definitely compatible with their network.
7) My SIM card is working on all other phones
8) The weird bit is that at the shop of carrier B, the shop assistant SIM worked, but a brand new SIM didn't.
9) I have tried reflashing Cyanogenmod. - not working
10) I have updated Cyanogenmod. - not working
11) SIM tray looks clear of dust/obstacles - still not working
System details: imgur dot com/zwiD3pR <--(sorry new acc)
Not to sure where to go to next. I guess I can try back to MIUI or stock android, but I'd love to hear what you think.
Try doing a factory reset (assuming you haven't as mentioned in post)
If still not working, remove the sim, flash the stock miui back through fastboot, guides of which can be found in more detail in the miui forums
See if the sim works or not, if it does try rooting and installing recovery
Then flash the cyanogenmod and see if the issue still persists
Sent from my MI 3W using Tapatalk
hi,
i have a big problem whit my moto g 2014, my phone do not find sim cards....
no sim in and there says: no service - lycamobile....
i have do everythink reboot, change sim, reboot whitout sim and: no service- lycamobile... ... invalid network Mode (-1), ignore. at the second slot it dind find a sim too but there says only empty...
i have a german moto g 2014
Rom: Nexus Experience 10.3.3
Kernel: halogen r28
baseband: MSM826BP_1032.3105.93.00R
can any one help me?
Invalid network mode -1 , ignore
Same with my moto e2 4g
After replacing sim 1, both sim slot shows empty.
Both sim working well in other phone,
Also tries with many other sim,
Tried everything
Reset original roam,
Custom ROM
All radio firmware
Contact sim provider and Motorola too
But nothing works
Have any solution?
Bhutdu said:
Same with my moto e2 4g
After replacing sim 1, both sim slot shows empty.
Both sim working well in other phone,
Also tries with many other sim,
Tried everything
Reset original roam,
Custom ROM
All radio firmware
Contact sim provider and Motorola too
But nothing works
Have any solution?
Click to expand...
Click to collapse
this usually happens when you change a rom and sometimes do mess with your modem files . try flashing then in fastboot
Hi, I have xt1079 for about 6 months, and it works well, since the day I used it in low coverage area,
it has Mokee 5.1 build and works in LTE network. And I take the 2nd sim card off while the phone was working, and after that the phone cant recognize the 2nd sim card at all, after a half of hour the 1st sim card lost too.
After rebooting the phone show phone app error...as I can see, in settings menu IMEI information became "unknown".
I wiped the phone and try to reflash the same firmware, but the result was the same. I tried 6.1 firmware, and the IMEI information came back and the phone works , but only in 2g. I mean I set the LTE/ 3G/2G, but it always in 2g network.
If I install LTE only or 3g only - no signal.
If I flash the phone back to any 5.1 ROM it's loose sim cards.
What would you recomend? Flash stock firmware?
I don't do it yet, what do I need to flash stock firmware?
Download the stock firmware for XT1079 and flash it from PC using fastboot. All the process & steps to flash are already available on XDA, just give it a search.
Install oxygen os or open beta latest. Then insert the jim sim only in slot 1. Slot 2 must be empty. Den after the network is shown, dial *#*#4636#*#*. In the menu that comes up, select network as LTE only. See whether volte icon is der at this stage. Now after this install the custom rom.. Dont insert the second sim now. After installing the custom rom and getting to home screen , see whether volte is working. It will work. Now insert the other sim in slot 2. Keeping the jio sim in slot 1. Volte will work. If you plan on using any other new sim.. make sure u first put it along with jio first. Jio should be in slot 1. After this only u can shuffle the sims wid the slots.
This method worked for me in every custom rom and volte will stick after reboots also.
Works on oneplus 3. Should work on 3t also.
You dont need to do this each time you flash a new rom. Do this if volte is not working or when you change from oos to custom roms.