Related
Hi folks,
There seem already many AOSP builds for NS, but I'm just pleased to share my personal build with you. I took the Google source and CM kernel/vendor as a base and have done lots of optimization work. My changes for NS after forking CM vendor were listed in the changelog of the initial build. Devs can check out commits on my github. It may worth a note that it's AOSP so never request extra features. No doubt I will keep it as stock as possible.
Credits:
clearly go to CM Team and all worked for our NS
steven676 for SurfaceFlinger and other patches
Download:
Final Build | MD5: 47af680bd273732d751de65656f62f7e
I don't hold the Nexus S any more, so if something in the final build does stupid for you, fall back to Build 6. And at last thank you again for your support.
Issues:
panorama preview. Check out CataHd's reply for the fix.
android-4.4.3-r1.1 build can be found in this reply. Panorama issue has been fixed.
You can find out all changes on my Github. Remember that AOSP ROM doesn't include Gapps, you have to install/flash it yourself.
Cheers,
Changelog:
Final Build
android-4.4.2_r2
merged some fixing patches from CM etc
Build 6
fixed random rebooting issue
saved about 3MB memory from the Kernel, thanks to pawitp
Build 5
android-4.4.2_r1
added swipe the pull-down panel to switch between Notifications and QuickSettings, thanks to CM/Slim
speed up statubar/notification drawer, thanks to kufikugel
changed dalvik heap parameters to reduce memory footprint (CodeAurora)
used double buffering instead of triple buffering
disabled hardware Vsync completely
fixed Screen record function, but in landscape only
increased the extra free memory to 12MB (you can change it in build.prop at any time.)
alpha 4
increased EGL cache size
switched to SW-based Vsync implementation by Google
fixed Keyguard layout for some languages
added a workaround to suppress the SU binary deprecated warning
few patches in Kernel and other minor fixes in SurfaceFlinger
alpha 3
merge in AOSP 4.4_r1.2
WebView black square issue was gone. Thanks to klusark for the wonderful porting work.
fixed app to sdcard function
enable low RAM feature in 4.4
root access fixed in Superuser with ART enabled
add Emoji support
Changes from init alpha Build:
merge the extra free kbytes patch from 3.4 Kernel
enable Swap for zRAM and KSM in Kernel side
Kernel 3.0.101
I will test this tomorow !
It's working fine. Very stock-ish feel. No FCs whatsoever (except for apps that are yet to be updated to fully support 4.3)
excellent rom thanks !!!!
only problem with superuser..I must install zip from recovery !!
then all ok !!
leap_ahead said:
excellent rom thanks !!!!
only problem with superuser..I must install zip from recovery !!
then all ok !!
Click to expand...
Click to collapse
Thanks for trying. But Superuser was fixed for weeks and works for me.
cn.fyodor said:
Thanks for trying. But Superuser was fixed for weeks and works for me.
Click to expand...
Click to collapse
no my friend .. I flash 3 times to make it sure and no work
if you go to settings superuser then u will se that u cant change anything in superuser settings..
also check with root checker..
but don't worry !! this is nothing for this super rom !! I try all aosp 4.3 rom and this is the best for me !!
leap_ahead said:
no my friend .. I flash 3 times to make it sure and no work
if you go to settings superuser then u will se that u cant change anything in superuser settings..
also check with root checker..
but don't worry !! this is nothing for this super rom !! I try all aosp 4.3 rom and this is the best for me !!
Click to expand...
Click to collapse
I tried changing settings in Superuser, every option works like charm. I always chased the changes of Superuser by Koush and the hack in that Superuser zip was included in my ROM. Afaik the tweak is just to run '/system/bin/su --daemon' for the root requirement.
OK, anyone else got superuser issue? xD
leap_ahead said:
no my friend .. I flash 3 times to make it sure and no work
if you go to settings superuser then u will se that u cant change anything in superuser settings..
also check with root checker..
but don't worry !! this is nothing for this super rom !! I try all aosp 4.3 rom and this is the best for me !!
Click to expand...
Click to collapse
cn.fyodor said:
I tried changing settings in Superuser, every option works like charm. I always chased the changes of Superuser by Koush and the hack in that Superuser zip was included in my ROM. Afaik the tweak is just to run '/system/bin/su --daemon' for the root requirement.
OK, anyone else got superuser issue? xD
Click to expand...
Click to collapse
Works fine here.
cn.fyodor said:
I tried changing settings in Superuser, every option works like charm. I always chased the changes of Superuser by Koush and the hack in that Superuser zip was included in my ROM. Afaik the tweak is just to run '/system/bin/su --daemon' for the root requirement.
OK, anyone else got superuser issue? xD
Click to expand...
Click to collapse
I don't know ..is not work here for that I flash the zip ..
sorry but is ok to flash the zip ? or I must try again without the zip ?
*now I remember that I get notification that su is out date and I forget to click ...
Downloaded and installed the latest superuser.zip and the su binary out of date notification is gone
Very good job. So happy to see the deveopment for our old phone continues.
Now, I can confirm Superuser doesn't work. Flashing SuperSU from recovery fixed the issue pretty fast.
Other than that the ROM is very solid and smooth. I tested SMS, Location services, Wi-Fi, left phone without a charge for a night. No problems so far. Will test bluetooth streaming later today in my car.
I have the same issue with calendar like any other non google build has, I have two of them, one is AOSP build another is Google's from the play store. That doesn't bother me.
Also, I still want to know what kind of "optimization" was done. Also, can anyone test MTP for me? I turned it on using USB Switcher, but my computer didn't recognize the device.
Great job, I hope the project continues.
@leap_ahead, velishka:
Let's rule out some exceptions about Superuser issue. Did you do factory reset before flashing? I hope the old Superuser app didn't make noise. Although you guys have fixed it manually, I still hope someone can paste the output of command 'getprop persist.sys.root_access' and check if the /system/xbin/su is running when you can't get root permissions. Thank you.
Hey,
just had a closer look at your build and found the interesting property 'ro.sys.fw.bg_apps_limit' in your build.prop which is set to 8. Are you sure this works in your build ? (I only ask because this was seen only in CM until now)...
Greetz
lagloose said:
Hey,
just had a closer look at your build and found the interesting property 'ro.sys.fw.bg_apps_limit' in your build.prop which is set to 8. Are you sure this works in your build ? (I only ask because this was seen only in CM until now)...
Greetz
Click to expand...
Click to collapse
Yeah, CM merged that commit from Codeaurora afaik. Bet you haven't checked out my github yet. xD
velishka said:
Very good job. So happy to see the deveopment for our old phone continues.
Now, I can confirm Superuser doesn't work. Flashing SuperSU from recovery fixed the issue pretty fast.
Other than that the ROM is very solid and smooth. I tested SMS, Location services, Wi-Fi, left phone without a charge for a night. No problems so far. Will test bluetooth streaming later today in my car.
I have the same issue with calendar like any other non google build has, I have two of them, one is AOSP build another is Google's from the play store. That doesn't bother me.
Also, I still want to know what kind of "optimization" was done. Also, can anyone test MTP for me? I turned it on using USB Switcher, but my computer didn't recognize the device.
Great job, I hope the project continues.
Click to expand...
Click to collapse
I connect the phone to car radio so it ok !
for root you can flash the superuser from koush too ...
use marmite kernel for mtp ...
I use other gapps so I don't have the problem with two calendar ..only one I get the green one ...
---------- Post added at 05:26 PM ---------- Previous post was at 05:25 PM ----------
cn.fyodor said:
@leap_ahead, velishka:
Let's rule out some exceptions about Superuser issue. Did you do factory reset before flashing? I hope the old Superuser app didn't make noise. Although you guys have fixed it manually, I still hope someone can paste the output of command 'getprop persist.sys.root_access' and check if the /system/xbin/su is running when you can't get root permissions. Thank you.
Click to expand...
Click to collapse
yes I make full wipe and ofcource factory reset ! with twrp recovery !
cn.fyodor said:
Yeah, CM merged that commit from Codeaurora afaik. Bet you haven't checked out my github yet. xD
Click to expand...
Click to collapse
Indeed, i didn't check it out yet. Link ?
lagloose said:
Indeed, i didn't check it out yet. Link ?
Click to expand...
Click to collapse
link :https://github.com/Juansheng
I can just say, very nice work, I'll try the rom soon
cn.fyodor said:
[*]Superuser fails (Workaround is to run '/system/xbin/su --daemon' via adb shell, then go to Superuser settings -> allow root access. Then it'll be fine even after a reboot. Thanks to leap_ahead for bug report)
[*]Gesture typing not working?
[/LIST][/HIDE]
Click to expand...
Click to collapse
or you can flash via recovery the superuser zip from here :http://download.clockworkmod.com/superuser/superuser.zip
for gesture I use other gapps that gesture is working without any problem
Wanna try this Rom, seems great..
Sent from my Nexus S i9023 using Tapatalk 4 Beta
Used this baby for 3 days now and have to say that it has the best memory management for 'low-memory' devices i've seen until now. Whatever you did cn.fyodor, very good work. !
I've noticed that CM has already reverted the commit for property 'ro.sys.fw.bg_apps_limit'. You should take care that this is not reverted in your sources because IMHO this is one of the essential things which gives us this better memory management. The relevant part can be found in line 105 of https://github.com/Juansheng/androi...s/java/com/android/server/am/ProcessList.java in your github.
Greetz
lagloose said:
Used this baby for 3 days now and have to say that it has the best memory management for 'low-memory' devices i've seen until now. Whatever you did cn.fyodor, very good work. !
I've noticed that CM has already reverted the commit for property 'ro.sys.fw.bg_apps_limit'. You should take care that this is not reverted in your sources because IMHO this is one of the essential things which gives us this better memory management. The relevant part can be found in line 105 of https://github.com/Juansheng/androi...s/java/com/android/server/am/ProcessList.java in your github.
Greetz
Click to expand...
Click to collapse
Thanks for your suggestion. Actually I once changed MAX_HIDDEN_APPS back the default value in Gingerbread for low memory devices nine months ago. Check this commit. ro.sys.fw.bg_apps_limit was just introduced by Codeaurora recently. And yeah CM have already reverted this prop and added a new prop for high memory (> 1.5GB) devices since more CM supported devices hold more memories nowadays. I'll ignore that commit.
Cheers,
I have discovered chinese developers are working on CM13.0 for A2015 version.
http://www.myzte.cn/thread-263527-1-1.html
It's needed to register on the chinese forum for getting the download link, but I have already downloaded and uploaded it to MEGA.
https://mega.nz/#!PwJS0QpZ!SphrqNpypkaPG86oJ_RoBxuIvFRnQy38LRHk9GymSwk
Can anyone try if it works on A2016? I bought it some days ago, so I'm waiting for it and I can't try it yet.
Facts about this rom vs. stock rom I could read from chinese people:
- Overheat
- No google services
- No fingerprint
- Better battery performance
- Faster
- Very slow boot
- Worst mobile coverage
- Works with Xposed
The version is only for the A2015, said in post #198 (http://www.myzte.cn/forum.php?mod=redirect&goto=findpost&ptid=263527&pid=3289532)
"Please don't install this ROM in AXON ELITE devices. it's only for AXON A2015. "
garciaHelp said:
The version is only for the A2015, said in post #198 (http://www.myzte.cn/forum.php?mod=redirect&goto=findpost&ptid=263527&pid=3289532)
"Please don't install this ROM in AXON ELITE devices. it's only for AXON A2015. "
Click to expand...
Click to collapse
So what's the difference between A2015 and A2016?
If there're no hardware differences, it wouldn't be difficult to make a port of this rom for A2016, right?
supremoh said:
So what's the difference between A2015 and A2016?
If there're no hardware differences, it wouldn't be difficult to make a port of this rom for A2016, right?
Click to expand...
Click to collapse
It shouldn´t be, as there are no dramatic hardware differences as far as I know. Unfortunately my knowledge in porting ROMs is almost non-existent.
I´d be grateful if a more experienced dev could investigate. :angel:
Just to give you all an answer - no its not compatible. I've made full backup in TWRP, then wiped all partitions and made an clean install then rebooted.
It stayed on ZTE bootloader screen for 15 minutes and it didn't booted. So not even passing the bootloader screen.
Full restore of stock ROM was only possible after first wiping all of the partitions, then rebooting, restoring the stock ROM and even then the stock ROM didn't wanted to boot. After going into the Factory reset mode (not resetting, just getting into with Volume low button and power) I was able to power off the phone, then start it and then it finally booted back to previously restored Stock ROM.
This was done on A2016 Elite model.
brainmaster said:
Just to give you all an answer - no its not compatible. I've made full backup in TWRP, then wiped all partitions and made an clean install then rebooted.
It stayed on ZTE bootloader screen for 15 minutes and it didn't booted. So not even passing the bootloader screen.
Full restore of stock ROM was only possible after first wiping all of the partitions, then rebooting, restoring the stock ROM and even then the stock ROM didn't wanted to boot. After going into the Factory reset mode (not resetting, just getting into with Volume low button and power) I was able to power off the phone, then start it and then it finally booted back to previously restored Stock ROM.
This was done on A2016 Elite model.
Click to expand...
Click to collapse
Many thanks for the try.
It seems we'll need a developer who ports this rom to our device.
supremoh said:
Many thanks for the try.
It seems we'll need a developer who ports this rom to our device.
Click to expand...
Click to collapse
It would definitely awesome having CM13 on this phone since the hardware is absolutely awesome considering the price tag. I have purchased this device from gearbest a few days ago for about 180 bucks. IMHO quite insane for QCOM MSM8994, 1080p, metal build etc.
Too bad ZTE isn't eager to provide proper community support...
My LG G4 shortly died (bootloop issue) after the alarm rang, waking me for work....still fulfilled its last duty... Lol
GalaxyFan88 said:
It would definitely awesome having CM13 on this phone since the hardware is absolutely awesome considering the price tag. I have purchased this device from gearbest a few days ago for about 180 bucks. IMHO quite insane for QCOM MSM8994, 1080p, metal build etc.
Too bad ZTE isn't eager to provide proper community support...
My LG G4 shortly died (bootloop issue) after the alarm rang, waking me for work....still fulfilled its last duty... Lol
Click to expand...
Click to collapse
I have saw some Russian people are now working on our A2016 version.
It seems we'll have some scene
I've found a way to boot and run Chinese CM13 for A2015 correctly on our A2016.
There is no fingerprint support! NFC have problems and you can't change lockscreen settings (use external lockscreen app works fine).
Dual SIM is supported, WiFi, Caliing, Data, Sound, Camera - everything works fine. Need to sort few thing out and check the bugs if there are A2016 dependend or CM bug, since this is unofficial ROM.
For the record - I'm not building CM13 myself, just made CM13 A2015 bootable on A2016 using some special files.
In couple of days, I'll upload the needed files for you guys, so that you can also use it.
AnTuTu gives 79k on CM13.
Greetings
BM
brainmaster said:
I've found a way to boot and run Chinese CM13 for A2015 correctly on our A2016.
[...]
Click to expand...
Click to collapse
Great news! :highfive:
Can't wait to try this out and give this phone some custom rom goodness
brainmaster said:
I've found a way to boot and run Chinese CM13 for A2015 correctly on our A2016.
Click to expand...
Click to collapse
That are really good news!
brainmaster said:
There is no fingerprint support! NFC have problems and you can't change lockscreen settings (use external lockscreen app works fine).
Click to expand...
Click to collapse
Sounds the same issues than I got when installing Chinese marshmallow rom on A2016, but I didn't test NFC. Does it have same issue also that when trying to enable password/pin protection in security options, settings will force close?
suunnittelija said:
Sounds the same issues than I got when installing Chinese marshmallow rom on A2016, but I didn't test NFC. Does it have same issue also that when trying to enable password/pin protection in security options, settings will force close?
Click to expand...
Click to collapse
Yes, correctly. The same issues. Can't tell if this is device firmware problem or ROM.
Is it possible to use the fingerprint and NFC files from the official A2016 Android 5.0 Firmware and port them to Android M? Like with the radio file (NON-HLOS.bin).
brainmaster said:
I've found a way to boot and run Chinese CM13 for A2015 correctly on our A2016.
There is no fingerprint support! NFC have problems and you can't change lockscreen settings (use external lockscreen app works fine).
Dual SIM is supported, WiFi, Caliing, Data, Sound, Camera - everything works fine. Need to sort few thing out and check the bugs if there are A2016 dependend or CM bug, since this is unofficial ROM.
For the record - I'm not building CM13 myself, just made CM13 A2015 bootable on A2016 using some special files.
In couple of days, I'll upload the needed files for you guys, so that you can also use it.
AnTuTu gives 79k on CM13.
Greetings
BM
Click to expand...
Click to collapse
So good news!! Can't wait for it
brainmaster said:
Dual SIM is supported, WiFi, Caliing, Data, Sound, Camera - everything works fine.
Click to expand...
Click to collapse
Did modem work without using NON-HLOS.bin from lollipop rom?
suunnittelija said:
Did modem work without using NON-HLOS.bin from lollipop rom?
Click to expand...
Click to collapse
Sorry, didn't tested that. I'm also back on stock, since the CM13 had few bugs. Can't recommend it as daily driver. With the time, the ROM become laggy and simple games started to stutter.
supremoh said:
I have saw some Russian people are now working on our A2016 version.
It seems we'll have some scene
Click to expand...
Click to collapse
May I ask where I can find some more Information about this process?
How is to use this rom, does it have any major issue? I'm interested in using pure android over the disgusting custom layer of ZTE. Thank you!
New CM release, password 9f1a
This ROM is no longer maintained. Sadly the last provided zip files got deleted by accident. If anyone can provide them, I will re-upload.
Disclaimer: Flash at your own risk! Backup your data before flashing! I am not responsible for bricked devices, World War III or your exploding cats!
Warning: The SGP611 images are not tested, but just built by me, as I do not own the device. But as the two devices are the same except for the 4G Modem, it should work. If not, please let me know.
About:
As my beloved SGP621 was just collecting dust, I decided to try porting Android 7.1 AOSP onto it.
And voila, with a few tweaks here and there, it works (for the most part).
What works:
- Display
- Sound
- WiFi
- 4G Data
- Bluetooth
- NFC (somewhat flakey, but much better with fixes in V4)
- LED
- Magnetic Cover Sleep/Wake
- WideVine DRM
- Double-Tap to wake
What doesn't work:
- FM Radio (working on it)
- Camera (Taking Pictures works, but sometimes the camera is not able to connect. Taking a video crashes the mediaserver.)
- You tell me
I have used it for the last few weeks. Battery life near optimal now and I had no crashes up until now. If your battery depletes rapidly, please disable NFC and check if it betters things. Then comment here, so I can look into it.
Keeping your data:
If you come from an earlier version of this ROM it should suffice to only flash boot.img and system.img. Coming from Stock or another ROM you could try to not flash userdata and see if it would keep your data, but I think it will not work in most cases.
Flashing:
Flashing userdata it is like doing a wipe. So BACKUP your data! You have been warned!
To flash it, you need to put your tablet into fastboot mode (VolUp + plugging in USB-Cable) and then flash the three image files from the zip file in the provided link like:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata userdata.img
gapps and/or root:
If you want Google Apps and/or root you need to download official twrp for scorpion windy (or inofficial for scorpion) from here and flash it to the FOTAKernel partition with the following command:
Code:
fastboot flash FOTAKernel twrp-3.0.2-0-scorpion_windy.img
After that you can boot into recovery by hitting VolUp multiple times once the LED flashes purple until it turns orange.
From there you are able to flash
- gapps for Nougat 7.1 arm (nano confirmed working, others could be problematic)
- Magisk-V8 and phh-SuperUser (confirmed working)
Tips for better battery life:
I installed Naptime to trigger deep doze as soon as the tablet goes to sleep. I also enabled zzmoove cpu gov and noop scheduler in the kernel options. Because of the high display brightness, I installed Lux Lite, to dim the screen if it is darker. This leads to me getting standby battery consumption of around 1.2% per hour (measured with GSam Battery Monitor) which is nearly the same amount I got with stock.
Changelog:
18.11.2016 - V4:
- Integrated newest Android Patches from Sony and Google.
- New binaries from qcom (camera, sensors, display, ...)
- Custom kernel with additional fixes, FMRadio patches (not working yet) and zen I/O scheduler
- Fixes and Enhancements here and there
08.11.2016 - V3:
- Integrated newest Android Version NDE63X from earlier today.
- Integrated and enabled WideVine DRM, so that Google Play Movies is now working.
- Custom kernel with additional zzmoove governer and adreno_idler patches to lengthen battery life
- Fixes and Enhancements here and there
04.11.2016 - V2:
- switched the Camera subsystem to HAL1 after discussion with the sony camera guys
- fixed most of the camera related crashes and hangs. Quality of the preview is poor, but pictures are okay.
- Taking a Video crashes the mediaserver and yields no playable result as of now.
- added build for SGP611, which is untested as I do not own the device. But it should work.
02.11.2016 - V1:
- Initial release: Everything except Camera is working. Camera uses HAL3.
Thanks:
- Sony, for providing awesome AOSP support on github
Downloads (currently not available):
V4 - GDrive - SGP621: scorpion-nougat-7.1-v4.zip
V4 - GDrive - SGP611: scorpion_windy-nougat-7.1-v4.zip
Older Downloads:
V3 - GDrive - SGP621: scorpion-nougat-7.1-v3.zip
V3 - GDrive - SGP611: scorpion_windy-nougat-7.1-v3.zip
oh man, you're awesome! i will test it when i have a little bit more time. Thanks!
for the camera there is a post in the forum that some dev are trying to figure out a solution for get a camera fully functional?
edit: for the moment the most things are working fine, only one thing when i play video, the video show a green imagen. i will continue testing.
wulfiss said:
oh man, you're awesome! i will test it when i have a little bit more time. Thanks!
for the camera there is a post in the forum that some dev are trying to figure out a solution for get a camera fully functional?
edit: for the moment the most things are working fine, only one thing when i play video, the video show a green imagen. i will continue testing.
Click to expand...
Click to collapse
Are you using a specfic video player? Which codec does the video file use?
As for the camera. I am already in contact with the camera guys from Sony and will experiment a little with their suggested solutions today.
@lowtraxx
Is this also for the WiFi only Z3 Tablet? (Scorpion Windy)
Gesendet von meinem SM-G930F mit Tapatalk
iamnotkurtcobain said:
@lowtraxx
Is this also for the WiFi only Z3 Tablet? (Scorpion Windy)
Gesendet von meinem SM-G930F mit Tapatalk
Click to expand...
Click to collapse
Nope, only SGP621 (scorpion) for now, as I have no scorpion_windy. I'll maybe do a blind build once scorpion is stable and functional enough for my taste.
wulfiss said:
oh man, you're awesome! i will test it when i have a little bit more time. Thanks!
for the camera there is a post in the forum that some dev are trying to figure out a solution for get a camera fully functional?
edit: for the moment the most things are working fine, only one thing when i play video, the video show a green imagen. i will continue testing.
Click to expand...
Click to collapse
Tried with many different samples from mplayerhq with many different codecs. In VLC with hardware and software decoding as well as with firefoxes internal playback. They all played back fine and without color distortion. Maybe your player app is not yet compatible with 7.1?
Well this is a surprise. Since I never used NFC and the Cameras with the tablet and always got rid of the corresponding apks in /system this would actually be a daily runner for me right now
Sadly I only have a SGP611, so no love for me right now...
Anyway, top notch work, keep it up!
Spleeno said:
Well this is a surprise. Since I never used NFC and the Cameras with the tablet and always got rid of the corresponding apks in /system this would actually be a daily runner for me right now
Sadly I only have a SGP611, so no love for me right now...
Anyway, top notch work, keep it up!
Click to expand...
Click to collapse
I think I nearly have the camera figured out. As soon as I am done with that, I will try to do a blind build for the SGP611 (scorpion_windy). If it goes through, you can be my guinea pig for testing if you want
sure thing
fröhliches schaffen
lowtraxx said:
Tried with many different samples from mplayerhq with many different codecs. In VLC with hardware and software decoding as well as with firefoxes internal playback. They all played back fine and without color distortion. Maybe your player app is not yet compatible with 7.1?
Click to expand...
Click to collapse
my fault I only tried playing with the gallery. other apps work well and I forgot to mention that I've installed this rom on my SGP611. thanks!
iamnotkurtcobain said:
@lowtraxx
Is this also for the WiFi only Z3 Tablet? (Scorpion Windy)
Gesendet von meinem SM-G930F mit Tapatalk
Click to expand...
Click to collapse
Spleeno said:
Well this is a surprise. Since I never used NFC and the Cameras with the tablet and always got rid of the corresponding apks in /system this would actually be a daily runner for me right now
Sadly I only have a SGP611, so no love for me right now...
Anyway, top notch work, keep it up!
Click to expand...
Click to collapse
I've installed this rom on my SGP611 and it works well. Give it a try, everything is working fine
wulfiss said:
my fault I only tried playing with the gallery. other apps work well and I forgot to mention that I've installed this rom on my SGP611. thanks!
I've installed this rom on my SGP611 and it works well. Give it a try, everything is working fine
Click to expand...
Click to collapse
Is it smooth? Better than cm12.1?
iamnotkurtcobain said:
Is it smooth? Better than cm12.1?
Click to expand...
Click to collapse
It's smooth, but I don't know if it better than cm 12.1 because I never used cm on the tablet.
Backup and try for you oneself . :good:
TWRP stopped working after Gapps flash.
Reflashed TWRP but still stack at TWRP wallpaper and doesn't start.
Does anyone have the solution?
ps. Found out if I take out SD card, TWRP works.
SD card corrupts easily, it seems.
ux50jp said:
TWRP stopped working after Gapps flash.
Reflashed TWRP but still stack at TWRP wallpaper and doesn't start.
Does anyone have the solution?
Click to expand...
Click to collapse
This is strange. Please try reflashing boot.img to boot and twrp to FOTAKernel. If that does not work, you could try formatting those partitions before writing to them via fastboot format.
ux50jp said:
TWRP stopped working after Gapps flash.
Reflashed TWRP but still stack at TWRP wallpaper and doesn't start.
Does anyone have the solution?
ps. Found out if I take out SD card, TWRP works.
SD card corrupts easily, it seems.
Click to expand...
Click to collapse
For the SD card corrupt, I took the sd and put sd again and it working fine and I don't any problems with TWRP
Sorry for my bad English I am trying to improve
Just posted a new version with better camera support.
04.11.2016 - V2: After discussion with the sony camera guys I switched the Camera subsystem to HAL1. Then I fixed most of the camera related crashes and hangs. Quality of the preview is poor, but pictures are okay. Taking a Video crashes the mediaserver and yields no playable result as of now.
Also I am currently running a build for SGP611 (scorpion_windy). If it builds with no problems, I will post it here for you to test.
Is there a way to get ROOT?
I just flashed SR3-SuperSUv278 and got a boot loop.
ux50jp said:
Is there a way to get ROOT?
I just flashed SR3-SuperSUv278 and got a boot loop.
Click to expand...
Click to collapse
I don't know if SuperSU works with 7.1.
I used Magisk and phh-superuser and it worked without bootlooping.
lowtraxx said:
I don't know if SuperSU works with 7.1.
I used Magisk and phh-superuser and it worked without bootlooping.
Click to expand...
Click to collapse
Thank you for your info.
I have flashed phh-superuser-magisk-r259 but the root is still missing. No boot loop though.
ps. Solved by installing phh's superuser from Play store.
Added build for SGP611, but the following Warning applies
Warning: The SGP611 images are not tested, but just built by me, as I do not own the device. But as the two devices are the same except for the 4G Modem, it should work. If not, please let me know.
Have fun testing
Hi,
Another LineageOS 14.1 unofficial here :
https://zukfans.eu/community/threads/unofficial-lineageos-14-1.6708/
I'm currently testing it : it's battery life oriented.
I noted that CPUs are under-clocked (1,6 Ghz-1,8 GHz max) in the last 08/03/2017 release.
No crashs/bugs seen so far...
I like this Rom very much. I dirty flashed it yesterday evening over AEX but had to wipe data also to avoid boot loop.
So far I have not find any problems.
When Xposed works on Zuk2 Pro with LOS 14/Nougat it will be perfect.
I've had a black screen followed by a blue led of death after a loss of 4G, so I'm back to AEX 07/24 - AEX seems to work better with KernelAduitor on my phone.
How is the image quality of camera? Better than AEX and RR? Similar to ZUI 2.5?
Z2 Pro
New update on zukfans forum 14.1- 20171001-UNOFFICIAL-z2_row https://zukfans.eu/community/index.php?threads/6708/
Sredna76 said:
New update on zukfans forum 14.1- 20171001-UNOFFICIAL-z2_row https://zukfans.eu/community/index.php?threads/6708/
Click to expand...
Click to collapse
Hi,
I'm just testing it right now.
What I can tell:
Camera is ok, GPS is ok, no poping sound in Facebook, very smooth, no chinese app.
U-Health installed but i didn't test it yet.
LED, sound and vibrator are ok.
Don't know about battery drain for now, but so far it seem better than AEX 4.6, real LineageOS experience....
Great work @cosme ! I guess I'll stick with it waiting for EAX6 beta, wich already seem really nice (I need aGPS :-S )
Please check uhealth, if spo² and heard rate sensor works. Thank you
toom11 said:
Please check uhealth, if spo² and heard rate sensor works. Thank you
Click to expand...
Click to collapse
So I checked. All permissions given to the app, I can connect but crashes when I enter my birthdate...
Sorry.
Battery consumption was higher for me so I have switched back to RR...(void kernel was not working with this rom)
I was very impressed of this ROM, extremely smooth with underclocked CPU ! But battery is not good as expected.
Dear All,
As of now I was finally able to install the ROM properly and the [email protected] to be finally working properly and the Video and the Audio stream to go in synch so my only mistake was that I was not wiping the proper partition and that was causing the [email protected] not synchronizing the Video stream and the Audio stream properly ... So first of all you need to use ZUKfans.eu forum particular TWRP 3.1.1-0 recovery provided and second if you install from a clean ZUI 2.5.462 ST like me once you unlock your bootloader and install the TWRP, you need to wipe only the DATA partition (do not wipe any other partition, leave them as is) and then install the build and the Open Gapps and voila ... 1080p60FPS is now working flawlessly good and even have this crisp and sharpness in the video
Thank you, this is so far the most clean and greatest build I've ever installed on my device and I vote for OFFICIAL, cause I've tried all the other features and they work properly and once again THANK YOOOOOUUU !!!
P.S. Sadly after reboot of the both devices the [email protected] once again have the same problem and the Video stream is going faster than the Audio stream :crying::crying::crying: Please let me know what kind of Logcat level should I capture and of course dmesg if needed ...
BUT !
NOOOOOO, after restart both devices are now not synchronizing the Video and the Audio streaming again... [emoji20] [emoji20] [emoji20] same old story and I didn't installed anything on the devices they are totally clean !!! So please let me know what kind of Logcat level do you want me to select while recording [email protected] and also if you want me I can take dmesg log too ... ???
Изпратено от моят ZUK Z2121 с помощта на Tapatalk
To go into deeper detail on the ROM, I used Lineage 16.0 20180901 s6 build modified for the s6 found here:
https://forum.xda-developers.com/ga...20x-5x-nexusos-9-0-samsung-galaxy-s6-t3843199
It was also based on NexusOS kernel that has been modified, so a big shout out to Team Nexus for the kernel and rom, and to @lukasb06 for porting it to s6.
The original kernel was by Team Nexus for s6 and s6e
Kernel Features;
v2.0: first support Pie on s6e+ and n5
change log:
support N5-s6e+ (ready for daily usage)
bug: BT, GPS, NFC
deep sleep fixed, init.d support, dyninteractive and a lot of kernel code changed.
the kernel can be found at :
https://github.com/slaminger/android_kernel_samsung_exynos7420
**I have made some modifications, added a shim, added code to the init.rc to disable p2p wifi. Moving forward the modifications to the kernel will be done by myself.
Please read and follow the instructions :
New zip uploaded for November. Each month has its own folder
This is not fully functional yet but it is close, no Bluetooth, no NFC. the two buttons next to home don't work yet(a couple of temporary solutions below)
BACK UP YOUR CURRENT ROM! especially efs. Some people have ril issues, I noticed my imei changed. A quick efs restore fixed it and my sim worked again.
The home button can be set to double tap for recent apps and use opera browser for compensation of no back button as they have their own, or download back button from play store to add floating buttons to screen. Some versions have buttons pre installed.
I can get bluetooth not to crash, but it doesn't connect.
Wifi Hotspot not working.
Now that the bad is out of the way.
Install Instructions Below:
The call audio and WiFi works, camera works(lower res for video to 1080), magisk is working but apk requires manual apk install, audio works, headphones, video, gapps, everything I have tried besides the above is OK.
The install is a process, first flash the ROM, then the pie fix, then no NFC, and then flash the boot.
Img and start the ROM. set your WiFi and take a look around, give it a moment to run). After first boot, reboot to twrp and flash gapps. If you do it all at once gapps crash sometimes. Once you have this all set up and good to go then add magisk.
9.0SeptSecurity is a different version from the august security not just in the sense that the security patch is different, but also the august build is N920 where the September build is G920F. One is from a note one from s6. It is possible one might resolve a bug that is in the other for your device, i am honestly not sure. different people report different bugs on the same device. If bluetooth does happen to be in one of the zips it will likely crash a lot. remove it via twrp by mounting system and then going to system/app and delete the bluetooth and bluetoothmidi folders.
The reason for lowering rear camera to 1080p for video is that it gets buggy at the 4k default.
A big thank you to NexusOS and LineageOS for their 9.0 lineage 16.0 s6 ROM which I used as a base to port this to our device!
i would also like to thank @topjohnwu for Magisk.
And @MirzaAwais for the Pie fix zip
Link for zenltecan:
https://mega.nz/#F!vKZ2UIzZ!BRrSiAxmz2DOjGmnkl26uA
Link for zenlte:
https://mega.nz/#F!Peo0FAjL!_eknpYZl8Ih-x2Hr9vSysg
Link for common files to be flashed on every device:
https://mega.nz/#F!yewjES6B!71Yrg0zaIzAys0wjxvMOzA
Link for Noblelte:
https://mega.nz/#F!DH4HSS7I!0MusytbbTqTsnWB6XzR2Bg
Modified RIL fix to disable P2P WIFI (connect droid to droid without internet, this saves battery life)
https://mega.nz/#F!OOwBmCJb!n7zaoutCLw74vsVTmXUjvg
Link for zenltetmo:
https://mega.nz/#F!7D5xhQab!WgqIleQph7goPHVVSVo1lA
New Multirom for note 5 and s6e+
https://mega.nz/#F!es4wnQjI!sCZqFZiJbhQr1BtEKYKzYw
It's a bit slow for the first little bit while setting up and whatnot, but once you get everything running it works fine. You can use kernel auditor if you find your battery is dying a little too fast.
I am VERY open to suggestions and or help with this, as it is my goal to fix the bugs and have a fully working 9.0 for our device. The buttons are a priority for me.
To briefly summarize: you sacrifice the back button, pages button, and Bluetooth and get 9.0. Everything else works. I've got viper4android going via magisk, the audio fx work. The ROM has a LOUD volume. So if you like music, enjoy. The back button/page has a work around(most apps have a back button), and you can get an app from play store called back button which gives you the home, back and recent button as tiny floating screen icons also, in the meantime. so just bluetooth really. Use modified cam perm boot shim.img
Enjoy
I removed Bluetooth from the ROM intentionally because it crashed constantly and was hard to disable for people unfamiliar with twrp. No NFC.
The camera has been modified to address pipeline errors that caused it to not work in other builds, it is now fully functional up to 1080p video.
The advanced menu seems to be working fine.
Magisk successfully installed with the following modules tested: Viper4Android, Sony Framework, Sony Music, Audio Modification Library, Sys Config Patcher.
SUBSTRATUM DOES NOT WORK ON ANDROID PIE. This is because google does not want us using OMS for custom themes. they disabled it on purpose. i do not believe systemless substratum will be possible moving forward on any device running pie. atleast not at the time being.
**** Solved** see next post** Netflix not currently working, I googled and found many users on pie are having issues.
Superuser works also, but magisk has modules.
More details will be coming.
All gapps 9.0 working on sm-g928
W8, I used the full aroma package and installed everything. However pixel launcher with assistant in the search bar will not work if you install the new Google webview. The built in Google now launcher will work, and I have tried Nova launcher prime. Keep in mind the more gapps you install the slower your device can get. it is best to only install what you need. i installed everything just to see what worked. but i noticed my phone was slower after a while.
The camera is only confirmed working on g928w8 Canadian, g928g, g928f international/american, note 5 N 920variants. Others have reported bugs.
Netflix Netflix-6.13.0_build_29940.apk confirmed working, both cast and watching videos.
Congrats! Will this rom work on Note 5 N920C too ?
ThePscho said:
Congrats! Will this rom work on Note 5 N920C too ?
Click to expand...
Click to collapse
It could be made to work yes, there is an alpha note5 ROM already on xda
so i flashed the ROM. very stable i can say, but unfortunately the camera still does not work. i was able to install google camera mod via adb but still the same problem. it does not crash tho. it's just not starting
Dread2000 said:
so i flashed the ROM. very stable i can say, but unfortunately the camera still does not work. i was able to install google camera mod via adb but still the same problem. it does not crash tho. it's just not starting
Click to expand...
Click to collapse
Suggestion: if you un-compress the rom(s) and do a search for *camera or camera* does it return any results. I suggest you compare it to a working version and determine what is missing in the system/ system/app and system/priv-app folder(s) once you determine what is missing then just bring those changes over to your folders
AFFAFXP said:
Suggestion: if you un-compress the rom(s) and do a search for *camera or camera* does it return any results. I suggest you compare it to a working version and determine what is missing in the system/ system/app and system/priv-app folder(s) once you determine what is missing then just bring those changes over to your folders
Click to expand...
Click to collapse
i will give a try but i don't think i'm going to make it
AFFAFXP said:
Suggestion: if you un-compress the rom(s) and do a search for *camera or camera* does it return any results. I suggest you compare it to a working version and determine what is missing in the system/ system/app and system/priv-app folder(s) once you determine what is missing then just bring those changes over to your folders
Click to expand...
Click to collapse
My camera works on SM-G928W8
Dread2000 said:
so i flashed the ROM. very stable i can say, but unfortunately the camera still does not work. i was able to install google camera mod via adb but still the same problem. it does not crash tho. it's just not starting
Click to expand...
Click to collapse
Let me try n rebuild it real quick for your device, its the same phone mine is just zenltecan not zenlte
Its uploading now, I used the same zip from my phone and changed the updater script to zenlte
OK its done, I named it v2, same link as first post
@godkingofcanada Hi, I've got same problem with this rom as I had with Oreo rom before. My WiFi MAC Address is 02:00:00:00:00:00 and it doesn't turn on. Have I to do something more than installing rom and all fixes with it ? I can provide logcat if it would do. Also after clean installation there was no bootanimation and no wallpaper. Just black screen and that's all. Hope to see quick reply. Cheers
aerzjee said:
@godkingofcanada Hi, I've got same problem with this rom as I had with Oreo rom before. My WiFi MAC Address is 02:00:00:00:00:00 and it doesn't turn on. Have I to do something more than installing rom and all fixes with it ? I can provide logcat if it would do. Also after clean installation there was no bootanimation and no wallpaper. Just black screen and that's all. Hope to see quick reply. Cheers
Click to expand...
Click to collapse
What variant of s6e+ do you have? And sure let me peek at the logcat, I have never had it boot to black screen, normally the boot only fails if you did not flash the boot.img. the pie kl500.zip fixes the Wi-Fi, the other zip disables NFC, did you flash both ?
godkingofcanada said:
What variant of s6e+ do you have? And sure let me peek at the logcat, I have never had it boot to black screen, normally the boot only fails if you did not flash the boot.img
Click to expand...
Click to collapse
I did everything from first post apart from installing gapps. Let me grab it, and I will upload here. Thanks for fast reply
aerzjee said:
I did everything from first post apart from installing gapps. Let me grab it, and I will upload here. Thanks for fast reply
Click to expand...
Click to collapse
You are welcome. Also, what country is your phone manufactured in?
godkingofcanada said:
You are welcome. Also, what country is your phone manufactured in?
Click to expand...
Click to collapse
It's G928F variant, I don't have phone box with me, so can't check on it. I bought it here in Poland.
godkingofcanada said:
What variant of s6e+ do you have? And sure let me peek at the logcat, I have never had it boot to black screen, normally the boot only fails if you did not flash the boot.img. the pie kl500.zip fixes the Wi-Fi, the other zip disables NFC, did you flash both ?
Click to expand...
Click to collapse
Logcat took via built-in SysLog app. Hope there's something
aerzjee said:
It's G928F variant, I don't have phone box with me, so can't check on it. I bought it here in Poland.
Click to expand...
Click to collapse
Give me a moment to look, you have the international variant but I don't think there's any hardware differences. I need to verify
godkingofcanada said:
Give me a moment to look, you have the international variant but I don't think there's any hardware differences. I need to verify
Click to expand...
Click to collapse
Also, the phone is identifying itself as SM-N920X is settings, same this was happening with Oreo ROMs. I'll keep this page refreshed once in a while, I hope that you will find something. I've updated bootloader, but I'm not sure if it changes something. Thanks for fast replies