After a failed stock rom flashing on my gear 1st generation, I've these kind of problem:
- when I try to reflash with Odin, the process keeps blocked on NAND Write start --> zImage, with the gear in download mode
- I've tried to launch an hard reset, going in recovery mode, but nothing, only a simple reboot verifies
- when I simply connect the gear via USB to my laptop nothing, it's is recongnized only in kies; also unstick DebugUSB, the gear is not recognized. I've tried to reinstall Samsung drivers, but nothing
- and when I try to pair with my S7 edge, a message to restore all the data compares, then a simple reboot, but the pairing is not complete
(sorry for my english not perfect). Please help me
The only flashing process that works is the one with the zip file AllSamsungDataRecovery
I suppose that it would be better to try an hard reset, but via PC, Kies, Odin or whatever...
Anyone doesn't have my same problems?
I suppose that it would be better to try an hard reset, but via PC, Kies, Odin or whatever...
Anyone doesn't have my same problems?
Anyone can help me??
Ok....First things first. What are you trying to install Android or Tizen????
What O.S did you have before the failed flash???
....If your trying to downgrade from Tizen back to Android then YES!! Your going to have problems, As Tizen changes the "PIT" When installing causing problems when you want to go back to Android.
Download this if your looking to install Stock Android for your Gear.
Then follow these steps...
1st...Extract the D/L'd file and you should see 5 files..(1_dn_android.tar...2_recovery.img.tar....2x png files & 1 ls02_android.pit file)
2nd....Open Odin and ensure the "Auto Reboot" is unticked, Then click on the "PIT" tab of Odin and choose the extracted ls02_android.pit file. Then click on "AP" tab and choose the extracted "1_dn_android.tar" file.
3rd.....Press Start, disconnect and close Odin when its done, the Gear will still be in DL mode.
4th....Put the Gear into Recovery Mode, A error message will pop up informing you that the "Firmware upgrade encounted a problem".....Dont worry.
5th.....With the error message still displayed reopen Odin and ensure Auto Reboot is unticked. Then in the AP tab your going to choose the extracrted "2_recovery.img.tar" file. Then press Start. Disconnect when done.
6th.....Reboot Gear into Recovery Mode, wait for it to do its thing. It'll auto reboot when ita done.
...This will put your GEAR on Android.
Related
Hi, I have a Samsung Galaxy S I 9000. I tried to flash the ROM, accidentlly switched off my phone. The phone would only go into Recovery mode so i erased everything on my Card and Reset my phone through Recovery. Since it still didnt start, i tried dowloading the I9000XXJP2.7z file and loading a fresh copy of phone software. Phone goes into downloading mode, however after loading all the files on Odin and pressing start, the message "Analysing files" comes up and nothing happens beyond that. It shows COM8. I'm absolutely new to this and dont know what to do. Can somebody please help.
So what is your current condition? can you go to Download Mode? I recommend use Odin.. I've bricked my SGS almost 10times while learning how to flash but managed to flash all desired Roms successfully (eventually )
I can go to the download mode however i dont know what am i not doing right as after selecting all the files (Pit, PDA, Phone, Modem, CSC) and being on com 8 and clicking on Start, all Odin does is say "Analysing files". Doesnt go beyond that and there is no activity (Blue bar) on the phone either. I'm not sure if the files i'm using are right or not or if im missing anything else here.
Hi,
was very interested in rooting my phone (Samsung Galaxy S) and putting a custom rom on it. I managed to put on Darky's latest rom last night. However it was giving me problems with the Android market (it crashed when it came to the installation part). Therefore, I want to get rid of all the modifications I made to my phone and go back to the settings how the phone was shipped to me.
How can I do that?
I already downloaded the original firmware (2.2.1) using this forum. It is a .tar file and I tried to flash it with Odin. Seemed to work at the beginning but there were still some elements, like apps, of the old Rom left. So I did the process again.
Now my phone starts up but after the boot screen I only have a black screen with the typical crash vibration patterns all the time. After flashing it again I get into the recovery mode showing errors.
Can somebody please tell me how to go back to my original firmware, without a custom rom, root access etc.?
I'm afraid that I will brick my phone now.
thank you
(I searched this forum but couldnt find anything related to my question)
Try a different firmware. Had the same issue when flashing a 2.1fw on an already 2.2 custom rom. Try a US 2.2 jpy. You can get any galaxy s firmware from (www samfirmware com).
Sent from my GT-I9000 using XDA App
thank you for the quick reply.
I am not 100% exactly sure if my procedure is right. Here is what I do:
1. Put your phone to download mode (hold down: volume down, home key, power)
2. Do not plug in your phone yet.
3. Start Odin3
4. Tick "Re-Partition", and also check that "Auto Reboot" and "F. Reset Time" have been ticked.
5. Click "PIT" button and select s1_odin_20100512.pit file.
6. Now, plug in the phone and wait until Odin finds it.
7. Click "Start" button... <Firmware update start...> <Get PIT for mapping...> appear. The phone will turn off and the screen indicates "Reset". Wait until Odin indicates "Pass".
8. Plug out your phone, remove the battery, put it back in and put phone to download mode again.
9. Click "Reset" button in Odin and untick "Re-Partition" box.
10. Do not select PIT file again. Just leave it empty.
11. I select here the downloaded firmware (2.2.1) in PDA. Everything else is blank (PHONE and CSC)
12. Phone installs and Odin shows pass
Now, the phone does not boot but goes into system recovery 3e showing an error message E: Cant mount /dev/block/st110
E: copy_dbdata_media:Cant mount DBDATA
After I select "reboot system now" the phone boots but gets stuck right after the Samsung logo disappears. then I only see a black screen and the vibration.
What am I doing wrong here?
thank you I really appreciate it!!
Follow instructions Block 2 method Odin and use the firmware you want .
http://forum.xda-developers.com/showthread.php?t=818556
jje
Firmware upgrade encountered an issue. Please select recovery mode in kies & try agai
i was trying to root my note something happen now i cant do nothing!!!in the screen say'''
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again even kies cant conect to the phone
PSYCHOBOY18 said:
i was trying to root my note something happen now i cant do nothing!!!in the screen say'''
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again even kies cant conect to the phone
Click to expand...
Click to collapse
what have you tried to do to fix this already?
ICS Bad Idea!!!
I wouldnt recommned updating to ICS especially through kies i had my phone stuck at "firmware upgrade encountered an issue please select recovery mode in kies and try again" for 2 days It was a disaster. So i came across a website called http://androidromupdate.com/2012/09...-firmware-upgrade-official-kiesota-stock-rom/
I then downloaded the the I927UCLH2 ICS 4.0.4 Original Stock ROM using ODIN... FOLLOW DIRECTIONS THROUGH THE SITE NOT KIES!! BUT THE ORIGINAL STOCK ROM!
***After you have successfully completed the stock rom with ODIN***
Get a rom from http://forum.jakar.co/android-hack/1345758298/ Choose the ROM called Bio360 its almost the same Replica of Gingerbread its Version 2.3.5
VERY IMPORTANT!! Make sure you put the ZIP FILE (ROM) in your INTERNAL STORAGE NOT THE EXTERNAL!!! (SD CARD SLOT) BIG MISTAKE!!
Go to google and type in "CWM captivate glide new" click the first link beggining with www.theandroidsoul.com........ FOLLOW DIRECTIONS THROUGH THE SITE!
After you have downloaded the Rom (ZIP FILE) and CWM put your phone into Recovery mode by powering off the device. hold power button and the volume down button until you see clockwork recovery, from here you are going to look for install from sd card and look for the zip file/Rom Bio360 and you should be set!
*******THE Bio360 Rom is also Rooted so there is no need to do an extra step************
*** I HOPE THSI HELPS ANY PROBLEMS FEEL FREE TO INBOX ME ANY QUESTIONS*** I WILL TRY MY BEST TO HELP......
Sorry guys wrong post this is for Samsung captivate glide! , my mistake..
Sent from my SAMSUNG-SGH-I927R using xda premium
Firmware upgrade encountered an issue. Please select recovery in Kies and try again
This is for Samsung Galaxy Note 2 (Sprint SPH-L900) Is the website for the stock rom
rwilco12.com
stock rom: [ROM][ODIN][TAR]SPH-L900 MA7 (MA7 Modem/Kernel/ROM - Stock
Odin 3 v 1.85 (You Can Google and find it)
ok sweet so I have done this successfully. i really believe you should put this on ur first post so people dont have to do searching and can feel at ease.
1. Start ODIN 3v1.85
2. Enter Download Mode
a. Power the phone off.
b. Plug the usb cable into the computer (not the phone)
c. Hold both sides of the volume rocker down (vol up + vol down)
d. While holding those buttons down, insert the usb cable into your phone.
It may take a second or two for the screen to display with a warning. Press the Volume UP key to download a custom ROM.
3. In ODIN, click PDA and select the PDA.tar file you extracted
4. DO NOT check re-partition, Flash Lock, Phone EFS Clear, Phone bootloader update
5. CHECK Auto Reboot and F.Reset Time
6. Click Start
At the end of the process ODIN's first block will show up as YELLOW with the words PASS and your phone will reboot.
Unplug USB from your phone after first boot.
It worked for me perfectly you don't have to F.Reset
Perhaps you should try the Note 2 forums for a more informative response?
I have the same problem with my tmobile galaxy s ii, T989
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again
and whenever I start installing a stock room using Odin 1.85 it force close and the phone stays in the same page saying
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again
Please help!
Tried everything I know and still not working
I tried two computers and everytime I start odin it forces stop
The screen is still in Firmware upgrade encountered an issue. Please select recovery mode in kies & try again
and I guess this is the download mode because I restarted it with volume up and down and pluged the usb and it turns to this screen
I downloaded odin again to make sure it runs ok and also tried it in my wifes phone and it runs with no problem
It is one of two cases, ether the phone is completely dead or the files I am using to be installed are not the correct ones
I tried the files on this post:
http://forum.xda-developers.com/showthread.php?t=1414341
Please tell me what to do
I really need the phone...
I'm a newbie here and doesn't followed correctly steps for install a theme, so it's completely my fault. Now, I need somebody to help me recovering my device.
I tried to install this theme http://forum.xda-developers.com/showthread.php?t=1808013
I read this thread http://forum.xda-developers.com/showthread.php?t=1551156 I've rooted the device and applied the instructions for "ClockWorkMod Recovery 5 - for use in future custons rom or partial back-up.-" but then, here is when I do wrong, I went to boot recovery mode (not CWM) > apply patch/update and selected the theme zip. Since then, every time I boot the device, it shows me 2 errors: the status bar process has stopped - And then the screen goes black and return again with the same error. At least it loads the background and icons of the main screen.
The device doesn't ask me for the password before the errors prompt. My device has the stock rom.
Can I fix it with recovery boot > wipe data/factory reset?
kalise said:
I'm a newbie here and doesn't followed correctly steps for install a theme, so it's completely my fault. Now, I need somebody to help me recovering my device.
I tried to install this theme http://forum.xda-developers.com/showthread.php?t=1808013
I read this thread http://forum.xda-developers.com/showthread.php?t=1551156 I've rooted the device and applied the instructions for "ClockWorkMod Recovery 5 - for use in future custons rom or partial back-up.-" but then, here is when I do wrong, I went to boot recovery mode (not CWM) > apply patch/update and selected the theme zip. Since then, every time I boot the device, it shows me 2 errors: the status bar process has stopped - And then the screen goes black and return again with the same error. At least it loads the background and icons of the main screen.
The device doesn't ask me for the password before the errors prompt.
Can I fix it?
Click to expand...
Click to collapse
Yeah from what you are describing you can 100% fix it. However if you didn't make a backup of any sort then you will need to reinstall your firmware with ODIN3 v3.07. Go to the same thread that you got ClockWorkMod Recovery from and download Odin from there. Then download the latest firmware for your country/region from here (you have to change the country to your own one in the drop down menu and sign up to download files which is free).
Make sure you download firmware for S5830i ONLY whatever you do! Wipe all user data in recovery just to avoid any further hiccups. Then put your phone in Download Mode (Power + VolUP + VolDown when switched off), connect it the PC and open Odin. Use the PDA section ONLY to put the tar.md5 firmware file in. DO NOT use a PIT file and do not tick any other options than the two default ones (Auto Reboot and FReset Time I think). Just follow that to the letter and once ODIN is done, it will almost definitely be back to normal again.
By the way also make sure you run Odin as administrator and that Kies is not running because they don't agree with each other.
I've downloaded the lastest firmware for my country (s8530i, Spain, November) and now Odin looks like this: i.imgur.com /rZ76d.png (no 10 posts yet, sorry)
I've got the device connected via USB and awaiting in odin mode "product name, custom bin, current bin, etc) "Downloading..." message. Should I use the entry "Wipe data/restore factory" from the recovery boot first?
Now, is everything ok, do I press start?
Very nearly but Odin hasn't recognised your phone yet. Basically you see where it says "ID:Com" with 8 grey boxes above the writing, well when Odin has made a connection with your phone one of those boxes should light up and something like COM:1-9 (number isn't important) will be displayed inside the box.
You probably need to install Samsung Kies (search for it on Google) which comes with the USB driver needed for Odin and then it should work. But as I said just make sure you actually kill/terminate Kies from Windows Task Manager before using Odin. If you've already installed Kies sometimes it's just being a pain in the backside, unplug the phone, pull the battery out, reinsert it, put the phone back in Download mode, reboot your PC, hopefully that should do it.
Everything else in your screenshot is absolutely fine. You don't have to Wipe Data before doing it, I usually do it because sometimes it can cause issues. In the worst case you might have to do it afterwards.
Sorry, my fault. The device wasn't plugged. Now it looks like this i.imgur.com /HJz3B.png
Done, device working, thank you very much and sorry for the trouble.
No trouble just press thanks button if I helped though please.
I'm a newbie on XDA so pardon anything that I might do "wrong"
So I was using safestrap recovery to play around with some custom roms, and I was going to switch to a new rom so I thought I was going to delete everything from Rom-Slot 1, but actually ended up going to the section where you can check off everything you want to delete from the the rom. I ended up checking all except micro SD card, and ended up deleting all the data from the stock rom by accident. I tried restarting the phone but all I see now is a stuck "Galaxy Note 3" on boot-up.
I've tried using Odin (with the BL AP CP CSC and PIT files ) to flash back and Oneclickbin.exe, but none work. They all give me a fail message shortly (or a couple minutes) after I press start
Additional notes:
Rooted with kingo root
I got the OTA update on the stock rom (The one with the black stock keyboard)
Please Help!!!
How do I fix this?!?!
UPDATE: Problem not fixed, but when I try to turn on the device, it now says:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I plugged my phone in the computer and kies can't connect to the device....
XerorebornX said:
I'm a newbie on XDA so pardon anything that I might do "wrong"
So I was using safestrap recovery to play around with some custom roms, and I was going to switch to a new rom so I thought I was going to delete everything from Rom-Slot 1, but actually ended up going to the section where you can check off everything you want to delete from the the rom. I ended up checking all except micro SD card, and ended up deleting all the data from the stock rom by accident. I tried restarting the phone but all I see now is a stuck "Galaxy Note 3" on boot-up.
I've tried using Odin (with the BL AP CP CSC and PIT files ) to flash back and Oneclickbin.exe, but none work. They all give me a fail message shortly (or a couple minutes) after I press start
Additional notes:
Rooted with kingo root
I got the OTA update on the stock rom (The one with the black stock keyboard)
Please Help!!!
How do I fix this?!?!
UPDATE: Problem not fixed, but when I try to turn on the device, it now says:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I plugged my phone in the computer and kies can't connect to the device....
Click to expand...
Click to collapse
Are you using Kies 3 or just the regular Kies?
Try putting the phone in download mode yourself, then plug into kies 3
Still no
Are you using Kies 3 or just the regular Kies?
Click to expand...
Click to collapse
I'm using Kies 3 and tried emergency recovery. It didn't work. Kies 3 actually doesn't even recognize my note 3 as a supported device, but I attempted the recovery anyway. I can get to step in the recovery where the recovery window on my computer says, "Do Not disconnect your device from the PC" but the loading bar never goes past 0%, then after a while it'll give me another fail message...
Try this
http://forum.xda-developers.com/showthread.php?t=2559715
XerorebornX said:
I'm using Kies 3 and tried emergency recovery. It didn't work. Kies 3 actually doesn't even recognize my note 3 as a supported device, but I attempted the recovery anyway. I can get to step in the recovery where the recovery window on my computer says, "Do Not disconnect your device from the PC" but the loading bar never goes past 0%, then after a while it'll give me another fail message...
Click to expand...
Click to collapse
Try this my friend (Same as above post sorry)
XerorebornX said:
I'm using Kies 3 and tried emergency recovery. It didn't work. Kies 3 actually doesn't even recognize my note 3 as a supported device, but I attempted the recovery anyway. I can get to step in the recovery where the recovery window on my computer says, "Do Not disconnect your device from the PC" but the loading bar never goes past 0%, then after a while it'll give me another fail message...
Click to expand...
Click to collapse
itmaster85 said:
Try this
http://forum.xda-developers.com/showthread.php?t=2559715
Click to expand...
Click to collapse
Problem solved!!!
Thank you so much