Hi Guys,
I need serious help, as I tried to drand my Huawei P9 Plus, that I have purchased for UK Vodafone in the UK, as they are the only people who sell it.
This phone was originally on VIE-L09C02B131.
I have tried to dbrand it to L09C423B181, using the video guide [VDO-GUIDE] How to debrand Huawei Phone by SRK Tool Huawei by somboons. It is now showing as L09C900B181.
I tried again to unlock my bootloader, Install TWRP, root my phone, so that I could reapply the correct C432 oeminfo and custom.bin file.
However my phone is now stuck in Huawei eRecovery boot and I am unable to get back into my phone at all.
Can someone please help.
UPDATE 1: I have now managed to get L09C432B181 installed on my phone, however, the firmware is still showing as L09C900B181 and my theme are now showing default.
UPDATE 2: I have now installed TWRP and SUPERSU, however the phone keeps rebooting to Huawei eRecovery. I now need to now update the custom.bin and oeminfo to C432.
Someone please help me. I can't work out where I went wrong, as I have followed the dbranding video.
Thanks in advance,
Bashy
i want to share my story, maybe it will help someone
I flashed HassanMirza01's Elite ROM using Elite TWRP and forgot to backup my partitions (very dumb move), and when i tried to return to stock using the dload method i couldn't, i even tried flashing the extracted partitions from UPDATE.APP using fastboot and it also didn't work, i was stuck because my OEMinfo partition was overwritten by the ROM so i tried to restore this Full Backup because it was for PRA-LA1C185 (same as my device), it worked but it caused me problems, i couldn't make calls and couldn't use the camera, and my boot screen changed from HUAWEI to HONOR, it turned out that GR3 2017 and Honor 8lite are both PRA-LA1C185 but the firmwares are different, so i kept looking for an OEMinfo backup for my GR3 so i can restore it and return to stock using eRecovery and i found this Thread that contains OEMinfo backups for LX1C432 (P8lite 2017) and LA1C185 (honor 8lite) but nothing for GR3 2017 (that is also LA1C185), soo i tried flashing honor8lite OEMinfo using Elite TWRP then i tried to return to stock using eRecovery but it gave me an error, then i tried OEMinfo for LX1 and flashed stock recovery over TWRP, then went into eRecovery and it worked, it started downloading stock PRA-LX1C432B160 and after booting everything worked great and i even recieved the PRA-LX1C432B194 update immediately, and now my phone says it is P8 lite 2017 (instead of GR3 2017) in Settings>About
What i learned :
1- DLOAD METHOD NEVER WORKS
2- ALWAYS BACKUP YOUR OEMinfo PARTITION SO YOU CAN RETURN TO STOCK USING eRECOVERY
3- ALWAYS BACKUP YOUR BOOTLOADER UNLOCK CODE BECAUSE WHEN YOU FLASH OEMinfo PARTITION THE PHONE WILL LOCK AND YOU CAN'T EVEN BOOT TO GET YOUR SERIAL NUMBER and EMEI TO UNLOCK IT
If you are in the same situation as me, follow this Tutorial made by @Youssef Reda who had the same problem with the same phone.
And if nothing works, use DC Phoenix software (not free) to force flash the stock UPDATE.APP, it works even if the bootloader is locked and FRP is locked.
Happy to help :highfive:
dz3ro said:
i want to share my story, maybe it will help someone
I flashed HassanMirza01's Elite ROM using Elite TWRP and forgot to backup my partitions (very dumb move), and when i tried to return to stock using the dload method i couldn't, i even tried flashing the extracted partitions from UPDATE.APP using fastboot and it also didn't work, i was stuck because my OEMinfo partition was overwritten by the ROM so i tried to restore this Full Backup because it was for PRA-LA1C185 (same as my device), it worked but it caused me problems, i couldn't make calls and couldn't use the camera, and my boot screen changed from HUAWEI to HONOR, it turned out that GR3 2017 and Honor 8lite are both PRA-LA1C185 but the firmwares are different, so i kept looking for an OEMinfo backup for my GR3 so i can restore it and return to stock using eRecovery and i found this Thread that contains OEMinfo backups for LX1C432 (P8lite 2017) and LA1C185 (honor 8lite) but nothing for GR3 2017 (that is also LA1C185), soo i tried flashing honor8lite OEMinfo using Elite TWRP then i tried to return to stock using eRecovery but it gave me an error, then i tried OEMinfo for LX1 and flashed stock recovery over TWRP, then went into eRecovery and it worked, it started downloading stock PRA-LX1C432B160 and after booting everything worked great and i even recieved the PRA-LX1C432B194 update immediately, and now my phone says it is P8 lite 2017 (instead of GR3 2017) in Settings>About
What i learned :
1- DLOAD METHOD NEVER WORKS
2- ALWAYS BACKUP YOUR OEMinfo PARTITION SO YOU CAN RETURN TO STOCK USING eRECOVERY
3- ALWAYS BACKUP YOUR BOOTLOADER UNLOCK CODE BECAUSE WHEN YOU FLASH OEMinfo PARTITION THE PHONE WILL LOCK AND YOU CAN'T EVEN BOOT TO GET YOUR SERIAL NUMBER and EMEI TO UNLOCK IT
If you are in the same situation as me, follow this Tutorial made by @Youssef Reda who had the same problem with the same phone.
And if nothing works, use DC Phoenix software (not free) to force flash the stock UPDATE.APP, it works even if the bootloader is locked and FRP is locked.
Click to expand...
Click to collapse
thanx For Your Help. So like to know if you have changed your model GR3 2017 Pra-la1 to européen P8 lite 2017 Pra-lx1 ??? it's work for you without problem !!!
I asked you because i flashed Pra-lx1 and it installed with problem for me i don't have many system app and the software update.
jalel25 said:
thanx For Your Help. So like to know if you have changed your model GR3 2017 Pra-la1 to européen P8 lite 2017 Pra-lx1 ??? it's work for you without problem !!!
I asked you because i flashed Pra-lx1 and it installed with problem for me i don't have many system app and the software update.
Click to expand...
Click to collapse
It works perfectly with 0 problems, how did u flash ?
dz3ro said:
It works perfectly with 0 problems, how did u flash ?
Click to expand...
Click to collapse
I know it's worked for you because the firmware istalled with Erecovery it's legal for Huawei server. but i installed this pra-lx1 with twrp i flashed him with many problem. i know your experience is the right way. but i'm surprised how the européen version pra-lx1 worked in middle east version pra-la1 i have the some one like you GR3 2017 with pra-lac185b188 software.
i like to change my GR3 2017 in the européen version but my smartphone is out of granti now and i'm affraid lol. if you can help me to know more fir that and thnx a lot ? .
im jalel from Tunisia
jalel25 said:
I know it's worked for you because the firmware istalled with Erecovery it's legal for Huawei server. but i installed this pra-lx1 with twrp i flashed him with many problem. i know your experience is the right way. but i'm surprised how the européen version pra-lx1 worked in middle east version pra-la1 i have the some one like you GR3 2017 with pra-lac185b188 software.
i like to change my GR3 2017 in the européen version but my smartphone is out of granti now and i'm affraid lol. if you can help me to know more fir that and thnx a lot ? .
im jalel from Tunisia
Click to expand...
Click to collapse
What happens when you go into eRecovery ? Does it show error ?
dz3ro said:
What happens when you go into eRecovery ? Does it show error ?
Click to expand...
Click to collapse
yes show error with my software GR3 2017 Pra-la1
I asked you if eRecovery work with pra-lx1 oeminfo ?
jalel25 said:
yes show error with my software GR3 2017 Pra-la1
I asked you if eRecovery work with pra-lx1 oeminfo ?
Click to expand...
Click to collapse
Yes it works, but back up your original OEMinfo, and then restore pra-lx1 OEMinfo from the link in OP
Ps: if you can, upload your backup of OEMinfo so we can all use it to return to GR3 2017 stock
dz3ro said:
Yes it works, but back up your original OEMinfo, and then restore pra-lx1 OEMinfo from the link in OP
Ps: if you can, upload your backup of OEMinfo so we can all use it to return to GR3 2017 stock
Click to expand...
Click to collapse
Now we can Restore with européen pra-lx1 right ?
but pra-la1 OEMinfo we can Restore software with him !!! i asked you because when we are in the default software i tried to restore the phone but he said error ?
why ?
jalel25 said:
Now we can Restore with européen pra-lx1 right ?
but pra-la1 OEMinfo we can Restore software with him !!! i asked you because when we are in the default software i tried to restore the phone but he said error ?
why ?
Click to expand...
Click to collapse
I don't know about original pra-la1 eRecovery because i never tried it, i tried honor 8lite OEMinfo and it gave me the same error.
But pra-lx1 I'm sure it works because i tried it
It is weird that we can't use our original OEMinfo to restore but we can use European OEMinfo
dz3ro said:
I don't know about original pra-la1 eRecovery because i never tried it, i tried honor 8lite OEMinfo and it gave me the same error.
But pra-lx1 I'm sure it works because i tried it
It is weird that we can't use our original OEMinfo to restore but we can use European OEMinfo
Click to expand...
Click to collapse
yes that's right the original stock doesn't work for eRecovery.
another question man. if i flash Elite Twrp i can backup my phone. and he can work without problem if i restore it ?
dz3ro said:
i want to share my story, maybe it will help someone
I flashed HassanMirza01's Elite ROM using Elite TWRP and forgot to backup my partitions (very dumb move), and when i tried to return to stock using the dload method i couldn't, i even tried flashing the extracted partitions from UPDATE.APP using fastboot and it also didn't work, i was stuck because my OEMinfo partition was overwritten by the ROM so i tried to restore this Full Backup because it was for PRA-LA1C185 (same as my device), it worked but it caused me problems, i couldn't make calls and couldn't use the camera, and my boot screen changed from HUAWEI to HONOR, it turned out that GR3 2017 and Honor 8lite are both PRA-LA1C185 but the firmwares are different, so i kept looking for an OEMinfo backup for my GR3 so i can restore it and return to stock using eRecovery and i found this Thread that contains OEMinfo backups for LX1C432 (P8lite 2017) and LA1C185 (honor 8lite) but nothing for GR3 2017 (that is also LA1C185), soo i tried flashing honor8lite OEMinfo using Elite TWRP then i tried to return to stock using eRecovery but it gave me an error, then i tried OEMinfo for LX1 and flashed stock recovery over TWRP, then went into eRecovery and it worked, it started downloading stock PRA-LX1C432B160 and after booting everything worked great and i even recieved the PRA-LX1C432B194 update immediately, and now my phone says it is P8 lite 2017 (instead of GR3 2017) in Settings>About
What i learned :
1- DLOAD METHOD NEVER WORKS
2- ALWAYS BACKUP YOUR OEMinfo PARTITION SO YOU CAN RETURN TO STOCK USING eRECOVERY
3- ALWAYS BACKUP YOUR BOOTLOADER UNLOCK CODE BECAUSE WHEN YOU FLASH OEMinfo PARTITION THE PHONE WILL LOCK AND YOU CAN'T EVEN BOOT TO GET YOUR SERIAL NUMBER and EMEI TO UNLOCK IT
If you are in the same situation as me, follow this Tutorial made by @Youssef Reda who had the same problem with the same phone.
And if nothing works, use DC Phoenix software (not free) to force flash the stock UPDATE.APP, it works even if the bootloader is locked and FRP is locked.
Click to expand...
Click to collapse
thank you very very much It's work for me too
i Rebranding my GR3 2017 north africa model to P8 LITE 2017 Européen Model it's amazing Software it's very faster and smoother model. the best model is the européen and it's a best solution to Restore The phone thank's for your best idea it's work without problem ???
jalel25 said:
thank you very very much It's work for me too
i Rebranding my GR3 2017 north africa model to P8 LITE 2017 Européen Model it's amazing Software it's very faster and smoother model. the best model is the européen and it's a best solution to Restore The phone thank's for your best idea it's work without problem ???
Click to expand...
Click to collapse
You're welcome mate
dz3ro said:
You're welcome mate
Click to expand...
Click to collapse
hi man how are you am filling good with europeen model very fast and stable but
this software work with one sim card hehe . i have many software update like B169 and B191 wich one
is better for device ????
jalel25 said:
hi man how are you am filling good with europeen model very fast and stable but
this software work with one sim card hehe . i have many software update like B169 and B191 wich one
is better for device ????
Click to expand...
Click to collapse
Really ???
Mine is dual sim, and i am on B194
Go to settings>update>click on three dots> download latest full package
dz3ro said:
Really ???
Mine is dual sim, and i am on B194
Go to settings>update>click on three dots> download latest full package
Click to expand...
Click to collapse
oh my god i flashed oem info by haky86 it.s for one sim mobile ???
plz tell me your oem info is for dual sim ?
how i can get ?
about software update i get B193 FULL its for one sim .
jalel25 said:
oh my god i flashed oem info by haky86 it.s for one sim mobile ???
plz tell me your oem info is for dual sim ?
how i can get ?
about software update i get B193 FULL its for one sim .
Click to expand...
Click to collapse
You should have flashed OEMinfo that i linked in first post, so u get the same firmware as me
dz3ro said:
You should have flashed OEMinfo that i linked in first post, so u get the same firmware as me
Click to expand...
Click to collapse
another question plz . if i flash OEMinfo for my PRA-LA1 and show me error ( didnt work ) .
how i can reflash another OEMinfo for example PRA-LX1 because the bootloader is loocked and the device dont boot and the twrp didnt work
that problem we can show in boot right .
jalel25 said:
another question plz . if i flash OEMinfo for my PRA-LA1 and show me error ( didnt work ) .
how i can reflash another OEMinfo for example PRA-LX1 because the bootloader is loocked and the device dont boot and the twrp didnt work
that problem we can show in boot right .
Click to expand...
Click to collapse
Unlock your bootloader using your unlock code and try again
dz3ro said:
Unlock your bootloader using your unlock code and try again
Click to expand...
Click to collapse
its worked for you when you unlock the bootloader again ???
you say tried to flash OEMinfo of PRA-LA1 and show error right here the bootloader is locked
then you unlock again and flash twrp and flash OEMinfo of PRA-LX1 this is the method right :good:
Hi guys, ı have P8 Lite 2017 build number C464, ı want C432. How can I do it? I have twrp, bootloader unlock and C432 Full-OTA downloand but how to install? I don't have oeminfo.. Pls help me guys
Xpredator 20 said:
Hi guys, ı have P8 Lite 2017 build number C464, ı want C432. How can I do it? I have twrp, bootloader unlock and C432 Full-OTA downloand but how to install? I don't have oeminfo.. Pls help me guys
Click to expand...
Click to collapse
I am not exactly sure how to guide you, check this thread and my post too.
Here are the oem infos.
Me, i wanted to convert it to dual sim, when i flashed the oem info it bricked actually, it was entering erecovery only, no TWRP, and prompted me to download and install the original firmware, i did so, the first time was a failure but on the second attempt it almost booted, imade a factory reset and a clear cache and it works fine, it was converted to dual sim, and the firmware that downloaded was not the original one, but the one that matched with the oem info that i had flashed, that's how i did it.
Hi,
I want to share you the firmware repair service huawei for p8 lite 2015 and 2017.
This firmware works only with the ALE-L21 and PRA-LX1 version.
What is repair service firmware:
Code:
[CENTER]When you buy dc phoenix (It cost 20€/$) you are able to fix your phone bricked or dead by flashing a firmware that rewrite all partition and wipe the emmc[/CENTER]
Looking around the net I found two repair service firmare, one for emui 3.1(LP) and one for emui 4.0.3(MM) and for o8 lite 17 with emui 5.x (N).
Requirement
Code:
[CENTER]* A Huawei P8 Lite with emui (I don t know if you need unlocked bootloader)
* Sd Card
* Stock recovery2[/CENTER]
How to use
Code:
[CENTER]* Extract the rar file
* Put dload folder into sd card
* Turn off the phone
* Press power and volume buttons and wait the boot in to recovery2[/CENTER]
NOTE: It' s recommended to don' t have emui 4.1 bootloader(this is in case of p8 lite 2015) or any custom rom installed before doing this, also I' m not responsible of any damage reported by using my stuff.
Download
Code:
[CENTER][URL="https://mega.nz/#!gC5AmQoC!L2nJAfgaqTIg9qsP7e9_VpsvK98iuZ1NoY73gZyn0jY"]Huawei_P8_Lite_ALE-L21_V100R001C432B133_Europe.rar[/URL]
[URL="http://androidhost.ru/3az"]Huawei_P8_Lite_ALE-L21_V100R001C432B365_Europe.rar[/URL]
[URL="http://androidhost.ru/3x5"]HUAWEI P8 LITE 2017 PRAGUE-L11C432B211 FIRMWARE ANDROID7.0 EMUI5.0.1 05014HYF.zip[/URL]
ALE-L21C432B052: [url]http://androidhost.ru/2Ub[/url] [/CENTER]
This maybe won't lock bootloader.
I recommend to flash this firmware if you are facing also lags and crashes every time, for me it worked like a charm.
Credits
@Askuccio_DROID
Team-mt for providing firmware and supporting huawei phones
Regards
ottimo
perfect
which is for simple sim or also doublé? thank you very much.
PECHOLOBO2001 said:
which is for simple sim or also doublé? thank you very much.
Click to expand...
Click to collapse
It s just for single sim, when I m able to find more firmwares I ll upload
PECHOLOBO2001 said:
which is for simple sim or also doublé? thank you very much.
Click to expand...
Click to collapse
Hello, now dual sim variant is available !
i have honor 8 lite PRA-LX1 Dual sim
i recieved an update from ' the system update app' so i DL and installed it ,, now my builed number is NRD90M test-keys!!!
how i can go back to normal version!
which software do i use
I have my huawei p10 lite bricked, and I need the stock rom to recover it with the dload method, it is the WAS-LX3C605B366
Please, I need to recover my device
Please post your issue in the P10 Lite forums. This here is for P10 VTR only.