Related
I want to reset binary counter on samsung galaxy note n7000 and I flash bootloader of galaxy s2 by odin to my galaxy note n7000. Now my galaxy note can not boot. How can I do for repairing?
Thank for help me.
ysambo said:
I want to reset binary counter on samsung galaxy note n7000 and I flash bootloader of galaxy s2 by odin to my galaxy note n7000. Now my galaxy note can not boot. How can I do for repairing?
Thank for help me.
Click to expand...
Click to collapse
Damn dude that's intense.
Sent from my GT-N7000 using Tapatalk 2
ysambo said:
I want to reset binary counter on samsung galaxy note n7000 and I flash bootloader of galaxy s2 by odin to my galaxy note n7000. Now my galaxy note can not boot. How can I do for repairing?
Thank for help me.
Click to expand...
Click to collapse
Just follow this guide http://forum.xda-developers.com/showthread.php?t=1354888.
I believe you are at step 7 now.
ysambo said:
I want to reset binary counter on samsung galaxy note n7000 and I flash bootloader of galaxy s2 by odin to my galaxy note n7000. Now my galaxy note can not boot. How can I do for repairing?
Thank for help me.
Click to expand...
Click to collapse
Man what were you trying to achieve by flashing the bootloader of S2 ?
Not sure if jig will help you. Try that.
If it does not help then you got a brick. Send it to samsung service center and get a motherboard replacement done at your cost m afraid!
kopitalk said:
Just follow this guide http://forum.xda-developers.com/showthread.php?t=1354888.
I believe you are at step 7 now.
Click to expand...
Click to collapse
Thank you.
I follow you and my phone is work well.
Thank you again.
abhisahara said:
Man what were you trying to achieve by flashing the bootloader of S2 ?
Not sure if jig will help you. Try that.
If it does not help then you got a brick. Send it to samsung service center and get a motherboard replacement done at your cost m afraid!
Click to expand...
Click to collapse
Now my phone is working.
Thanks
ysambo said:
Now my phone is working.
Thanks
Click to expand...
Click to collapse
Did you use JIG to reset your binary counter? How did you do it?
Edit: I have solved the issue. I was able to remove the triangle and the binary counter as mentioned in this thread in post #13 of this thread. Please read the all the 13 posts for proper context.
Galaxy Note Boot Repair Without JTAG / RIFF box ??
I have to ask the originaltor of this thread - how did you fix your 'bricked' Samsung phone?
As I have made the same mistake...
I used odin on the pc and flashed (by mistake) the wrong bootloader into the phone (as part of flashing fresh rom procedure)!
So now....
Basically when I press power on the phone, nothing happens.
When I put the 'jig' into it - nothing happens - no download mode
when I press the recovery key / download key modes - nothing happens
When I plug the charger in - there is no battery charge icon
When I plug the usb cable into the laptop - nothing happens
Basically the phone is bricked and having read a similar thread on how to revive a Samsung without the phone having to be turned on, or the battery in, well I thought to ask.
Many thanks for any replies.
http://forum.gsmhosting.com/vbb/f200/gt-i9100g-usb-boot-repair-here-1488048/
Basically JTAG / RIFF box will repair the boot loader....but are there other ways??
..
Can you help me?
ysambo said:
Thank you.
I follow you and my phone is work well.
Thank you again.
Click to expand...
Click to collapse
I am in the same situation as you, could you tell me if you had to buy the jig thing to make your phone work? Which specific steps from the post did you have to follow? Thanks! Daniel.
http://forum.xda-developers.com/showthread.php?t=1354888
Hello,
I purchased a second hand phone and did not know that it was korean galaxy Note, ,
After trying to flash PhilZ-cwm6 recovery I hard Bricked my Phone. it won't charge, it won't turn on, No Recovery, No Download mode. Since I am in India, Samsung does not repair my Korean Phone, Is there any hope for this device??
Please Please Please Heeelp...
mchauhan said:
Hello,
I purchased a second hand phone and did not know that it was korean galaxy Note, ,
After trying to flash PhilZ-cwm6 recovery I hard Bricked my Phone. it won't charge, it won't turn on, No Recovery, No Download mode. Since I am in India, Samsung does not repair my Korean Phone, Is there any hope for this device??
Please Please Please Heeelp...
Click to expand...
Click to collapse
there must be lot of local technicians in your locality, try them, negotiate pricing.
You should try harder to get into download mode some how.. I have seen people flashing S2 rom on N7000 and regenerating.
Try this thing.
Azeazezar said:
Try this thing.
Click to expand...
Click to collapse
Thanks, But My Phone is Dead Bricked so I am not sure if USB JIG can help me.
I have seen a video on youtube from MobileTechVideos and my Phone is in same condition.
http://www.youtube.com/watch?v=d0SX3iDuIZc
But I am not sure If any body in my Town does that.
Does your PC detect your phone???
Yesterday evening my phone was on the charger then it suddenly stopped and it is completely dead. It isn't showing any signs of life ever since, even if I charge it. It doesn't even show offline charging and I can't send it to Samsung as it's rooted so my warranty it VOID. It seems to me that it has Sudden Death Syndrome because it has been recently been switching off and now it's completely dead. What should I do? I'm pretty much screwed!
KoolKid98189 said:
Yesterday evening my phone was on the charger then it suddenly stopped and it is completely dead. It isn't showing any signs of life ever since, even if I charge it. It doesn't even show offline charging and I can't send it to Samsung as it's rooted so my warranty it VOID. It seems to me that it has Sudden Death Syndrome because it has been recently been switching off and now it's completely dead. What should I do? I'm pretty much screwed!
Click to expand...
Click to collapse
Can you enter download mode?
robintjeuuu said:
Can you enter download mode?
Click to expand...
Click to collapse
Well... I managed to just get it into offline charging. When I boot it up in normal mode it shows Samsung Galaxy S3 mini then after a few seconds the bottom lights flash for half a second and shut down. When I try to boot to recovery, model name then shut down. Yes it can just about make it into download mode.
KoolKid98189 said:
Well... I managed to just get it into offline charging. When I boot it up in normal mode it shows Samsung Galaxy S3 mini then after a few seconds the bottom lights flash for half a second and shut down. When I try to boot to recovery, model name then shut down. Yes it can just about make it into download mode.
Click to expand...
Click to collapse
If you get into download mode, go to sammobile en download the firmware for your phone and flash it with odin. if that worked, open stock recovery and do a fatory reset to make sure everything is back to stock... Then you can just hope it won't happen again.
robintjeuuu said:
If you get into download mode, go to sammobile en download the firmware for your phone and flash it with odin. if that worked, open stock recovery and do a fatory reset to make sure everything is back to stock... Then you can just hope it won't happen again.
Click to expand...
Click to collapse
I tried flashing stock recovery and ROM through Odin, it said pass but nothing actually seemed to fix and it still has the same problem that it shuts down after showing logo and when I boot to recovery it just shows TeamWin for a few seconds and shuts down so looks like I'm screwed and I have to use my BlackBerry :'(
KoolKid98189 said:
I tried flashing stock recovery and ROM through Odin, it said pass but nothing actually seemed to fix and it still has the same problem that it shuts down after showing logo and when I boot to recovery it just shows TeamWin for a few seconds and shuts down so looks like I'm screwed and I have to use my BlackBerry :'(
Click to expand...
Click to collapse
Ok, can't help you, maybe search this forum for unbrick device. I know there are fixes that can be used with some bricks.
robintjeuuu said:
Ok, can't help you, maybe search this forum for unbrick device. I know there are fixes that can be used with some bricks.
Click to expand...
Click to collapse
And I don't think Samsung will repair it as my warranty is void and I doubt if my parents would get me a new phone as this phone is only 3 months as well! And I have seen an unbrick thread and I tried it and it didn't work :'(
Well, I know how you feel. My charging port died once after I changed rom. Samsung asked me 200 for repair. Maybe you can give it a try and send him in... You never know Samsung loves you more than me..
Sent from my GT-I8190 using Tapatalk
robintjeuuu said:
Well, I know how you feel. My charging port died once after I changed rom. Samsung asked me 200 for repair. Maybe you can give it a try and send him in... You never know Samsung loves you more than me..
Sent from my GT-I8190 using Tapatalk
Click to expand...
Click to collapse
My dad took it to the service centre and they said they can't fix it as it's rooted so I'm screwed :'(
sunny296 said:
thanks,this index help me out very much.
Click to expand...
Click to collapse
What do you mean?
Zamoro1 said:
it is not samsung galaxy problem. it was your problem. you must close your downloading and other working while it is on charging.
Click to expand...
Click to collapse
It wasn't downloading anything?
Don't worry everyone I sent it to a repair shop (not Samsung) so I hope they manage to fix it.
Mine also dead
KoolKid98189 said:
Don't worry everyone I sent it to a repair shop (not Samsung) so I hope they manage to fix it.
Click to expand...
Click to collapse
Have you any news about the problem in your phone?
Mine (i8190 with one of the mclaws roms from previous week) also appeared in the morning shut down and there's no way of starting it. It does not even vibrate when power button pressed, as if the battery was completely empty.
Tried with another battery and checked that the original one had charge, but no luck. It does not start (normal, download or recovery, makes no difference).
Any ideas?
PelosBi said:
Have you any news about the problem in your phone?
Mine (i8190 with one of the mclaws roms from previous week) also appeared in the morning shut down and there's no way of starting it. It does not even vibrate when power button pressed, as if the battery was completely empty.
Tried with another battery and checked that the original one had charge, but no luck. It does not start (normal, download or recovery, makes no difference).
Any ideas?
Click to expand...
Click to collapse
Well mine was dead for a day then I plugged it into the charger (this was after a day and I left it on charge all night and it wouldn't start) and I held the power button for 10 seconds while it was on the charger it showed offline charging so I let it charge for a bit and then I powered it on and it seemed to be bricked so I sent it to a phone repair shop (not Samsung as my warranty is void). If it doesn't show any signs of life then it's bricked. If it comes to life then it is also probably bricked. I tried flashing many recoveries, ROMs, kernels and params and nothing happened.
In the S III Mini General forum there are topics about getting your phone back to stock so that it is covered by warranty.
james.faction said:
In the S III Mini General forum there are topics about getting your phone back to stock so that it is covered by warranty.
Click to expand...
Click to collapse
I tried to flash stock ROM and recovery but nothing actually worked!
1. Did you follow the instructions in detail?
2. What does "nothing actually worked!!" mean??
Maybe you need to work out what is the problem and why it is failing. Then you will be able to figure out if it is actually fixable, and if so how to fix it. "Trying everything" doesn't really work unless you make an effort to analyse the results you get every time you try something.
You could try posting in one of the threads about taking the phone back to stock. The people who posted them might be able to help you, they are more experienced at this sort of thing.
james.faction said:
1. Did you follow the instructions in detail?
2. What does "nothing actually worked!!" mean??
Maybe you need to work out what is the problem and why it is failing. Then you will be able to figure out if it is actually fixable, and if so how to fix it. "Trying everything" doesn't really work unless you make an effort to analyse the results you get every time you try something.
You could try posting in one of the threads about taking the phone back to stock. The people who posted them might be able to help you, they are more experienced at this sort of thing.
Click to expand...
Click to collapse
I tried those solutions and they didn't work.
Kid, can you read?
What did you try? What was the result?
"didn't work" isn't a result, it's you giving up. Without even trying to find out why it didn't work.
james.faction said:
Kid, can you read?
What did you try? What was the result?
"didn't work" isn't a result, it's you giving up. Without even trying to find out why it didn't work.
Click to expand...
Click to collapse
I read all instructions, and when I flashed it via Odin, nothing actually changed even with the params!
Hello,
I wanted to root my S3 mini (GT-i8190, that worked but then I wanted to enter Bootloader. I downloaded EZ-Unlock 11.apk and installed it on my S3 mini. I launched the app and selected unlock and after I wanted to reboot it, it didn't work anymore... I can't enter Recovery Mode... I live in the Netherlands so I actually don't want to buy something from Amazon or so. I saw a little movie with a paperclip and graphite but that vid has been removed... HELP ME PLEASE!!!
SebastiaanSpeck said:
Hello,
I wanted to root my S3 mini (GT-i8190, that worked but then I wanted to enter Bootloader. I downloaded EZ-Unlock 11.apk and installed it on my S3 mini. I launched the app and selected unlock and after I wanted to reboot it, it didn't work anymore... I can't enter Recovery Mode... I live in the Netherlands so I actually don't want to buy something from Amazon or so. I saw a little movie with a paperclip and graphite but that vid has been removed... HELP ME PLEASE!!!
Click to expand...
Click to collapse
what are you doing ???
SIII mini don´t need to unlock a bootloader.
Just follow this guide here
It's to late now... I couldn't get in Bootloader... How can I access my phone when it's hard-bricked? Maybe I can remove everything and put back the original software
SebastiaanSpeck said:
It's to late now... I couldn't get in Bootloader... How can I access my phone when it's hard-bricked? Maybe I can remove everything and put back the original software
Click to expand...
Click to collapse
what you should do is go through the sticky threads in the general section and this section before you start messing around with that phone again
But the sticky note is for an soft-bricked s3 mini... Mine is hard-bricked
SebastiaanSpeck said:
But the sticky note is for an soft-bricked s3 mini... Mine is hard-bricked
Click to expand...
Click to collapse
So, if you press the power button, the phone don't turn on?
That's right. I also tried the 3-buttons but nothing works, not a single vibration. Even my pc won't recognize it
What happen if you charge the phone?
Nothing, the screen remains black. I tried the usb-cable on pc, a usb charger and the cable... but nothing works
SebastiaanSpeck said:
Nothing, the screen remains black. I tried the usb-cable on pc, a usb charger and the cable... but nothing works
Click to expand...
Click to collapse
OK your phone is really hard bricked. Only send it back to Samsung can help you.
Also a usb JIG won't work?
i suggest you to contact @Alejandrissimo.search for him here in xda or internet.i hard bricked my previous phone(sony neo),totally dead like yours and he fixed it .even if he can t do this he should point you to some other guy who could possibly do it
broky said:
i suggest you to contact @Alejandrissimo.search for him here in xda or internet.i hard bricked my previous phone(sony neo),totally dead like yours and he fixed it .even if he can t do this he should point you to some other guy who could possibly do it
Click to expand...
Click to collapse
Thanx I'm gonna contact him
Hi All.
I am looking for help and advice with regards to getting my wife's Samsung Galaxy S3 Mini GT-I8190N working again.
My wife has been having issues with this phone restarting it's self at random on and off for the last few months, but as the phone is always in use/needed, I have been unable to have a look for the cause of the problem.
A few weeks ago the phone powered down, and would not switch back or, it would also not charge.
After removing the battery and having a closer look it seems that the battery has swollen and is no longer flat so a new replacement battery was ordered.
The new replacement battery was fitted and the phone was put on charge, the phone displayed that is was now charging, I thought all was good and just left the phone to charge.
Some time later on I tried to power on the phone, but am just greeted by "Samsung Galaxy S3 Mini GT-I8190N" logo and then the phone just restarts again, and keeps on doing this.
The phone is 100% stock, it has not been unlocked or re-flashed.
The phone is on contract from Tesco Mobile, but my wife has been told by Tesco that the warranty has expired.
From searching on the forum it seems that it is quite common for Samsung phones to get stuck in this kind of boot loop.
So far it seems that there are two possible ways to fix the current issue.
1 - Power off the phone and go into boot-loader and do a factory reset.
or
2 - Re-flash the stock rom.
So I thought I would 1st try the factory reset.
So I removed and replaced the battery, Held down "Volume Up, Home, Power", I am then greeted by "Samsung Galaxy S3 Mini GT-I8190N" logo and the phone just sits there.
So it now looks like the only other option is to re-flash the phone with the stock rom.
But how do I find out what stock rom that I need for this phone, as I am unable to get into the bootloader to run any ADB or FastBoot commands.
Any help would be much appreciated.
Thanks for your time.
Best Regards.
MadProfessor2002 said:
Hi All.
I am looking for help and advice with regards to getting my wife's Samsung Galaxy S3 Mini GT-I8190N working again.
My wife has been having issues with this phone restarting it's self at random on and off for the last few months, but as the phone is always in use/needed, I have been unable to have a look for the cause of the problem.
A few weeks ago the phone powered down, and would not switch back or, it would also not charge.
After removing the battery and having a closer look it seems that the battery has swollen and is no longer flat so a new replacement battery was ordered.
The new replacement battery was fitted and the phone was put on charge, the phone displayed that is was now charging, I thought all was good and just left the phone to charge.
Some time later on I tried to power on the phone, but am just greeted by "Samsung Galaxy S3 Mini GT-I8190N" logo and then the phone just restarts again, and keeps on doing this.
The phone is 100% stock, it has not been unlocked or re-flashed.
The phone is on contract from Tesco Mobile, but my wife has been told by Tesco that the warranty has expired.
From searching on the forum it seems that it is quite common for Samsung phones to get stuck in this kind of boot loop.
So far it seems that there are two possible ways to fix the current issue.
1 - Power off the phone and go into boot-loader and do a factory reset.
or
2 - Re-flash the stock rom.
So I thought I would 1st try the factory reset.
So I removed and replaced the battery, Held down "Volume Up, Home, Power", I am then greeted by "Samsung Galaxy S3 Mini GT-I8190N" logo and the phone just sits there.
So it now looks like the only other option is to re-flash the phone with the stock rom.
But how do I find out what stock rom that I need for this phone, as I am unable to get into the bootloader to run any ADB or FastBoot commands.
Any help would be much appreciated.
Thanks for your time.
Best Regards.
Click to expand...
Click to collapse
Download the stock firmware you prefer from here: http://www.tsar3000.com/Joomla/inde...iii-mini-firmwares&catid=55:samsung&Itemid=82
Then follow this guide to install it: http://forum.xda-developers.com/showthread.php?t=2429169
Riky720: Thank you for your reply, and the links.
I have already been reading the following guides
[GUIDE] Stock Rom - All S3 Mini
and
[GUIDE] Unroot / Unbrick, Flash official stock firmware on Galaxy SIII Mini GT-I8190
Can you please advice how I can find out what is the correct firmware / stock rom to download, as the phone will not boot, and I am unable to use ADB or Fastboot to pull any information from the phone.
As said before my wife got the phone from Tesco Mobile on contract, and from my understanding is that Tesco Mobile uses the O2 Network.
Looking at the list of firmware's I can't not see any listed as Tesco Mobile.
Thanks again for your time.
Best Regards.
I am still having issues with this phone, and I have been unable to progress forward.
I did start this post: Samsung Galaxy S3 Mini GT-I8190N - Re-flashing stock rom, to try and locate the stock firmware (rom) so that I could re-flash it.
From my other post I have been able to locate the following firmware (roms) for the phone.
I8190NXXAMJ2_I8190NBTUAMJ1_BTU.zip
I8190NXXAMG1_I8190NOXXAMG1_BTU.zip
I8190NXXALL6_I8190NOXXALL3_BTU.zip
I have tried flashing all of the above firmwares (roms) one by one, but I am still having the same issue.
Can anyone please advice me on anything else that I can try.
Thanks for your time.
Best Regards.
I am still having issues with this phone, and would really like some help and advice.
I found this post with a similar issue: S3 Mini stuck in boot loop after flashing cm 10.2 try odin am i missing a step?
The above post pointed me here: Official ROOTED firmwares for the SIII mini - OXX csc
I have once again tried all the I8190N firmware (roms) listed, and I am still having the same issue as before.
Just to recap the issue that I am having.
The phone will switch on, get as far as displaying "Samsung Galaxy S3 Mini GT-I8190N" then the phone restarts, this will on happening.
If you try to start the phone in bootloader / recovery mode the phone will just display "Samsung Galaxy S3 Mini GT-I8190N" and sit there.
Powering up the phone in Odin mode seems to work fine.
Thanks again for your time.
Best Regards.
MadProfessor2002 said:
I am still having issues with this phone, and would really like some help and advice.
I found this post with a similar issue: S3 Mini stuck in boot loop after flashing cm 10.2 try odin am i missing a step?
The above post pointed me here: Official ROOTED firmwares for the SIII mini - OXX csc
I have once again tried all the I8190N firmware (roms) listed, and I am still having the same issue as before.
Just to recap the issue that I am having.
The phone will switch on, get as far as displaying "Samsung Galaxy S3 Mini GT-I8190N" then the phone restarts, this will on happening.
If you try to start the phone in bootloader / recovery mode the phone will just display "Samsung Galaxy S3 Mini GT-I8190N" and sit there.
Powering up the phone in Odin mode seems to work fine.
Thanks again for your time.
Best Regards.
Click to expand...
Click to collapse
Let me understand.
Download mode is working fine and ODIN recognizes phone ?
You tried to flash stock ROM via Odin ?
But It still stucked in bootloop ?
That is correct.
Are you sure about did you find the stock ROM ?
Behind the battery there is a paper. With S/N you may understand which baseband do you have
I am not sure about the stock firmware (rom), that is why I have been asking for help and advice.
The sticker under the battery has the following details:
MODEL: GT-I8190N
FCC ID: A3LGTI8190N
SSN: -I8190NGSMH
IMEI: ******/**/******/*
S/N: R21D7D7BEJE
Click to expand...
Click to collapse
The sticker on the NAND Flash chip has the following details:
073110
H49C BTU
HS033741
C-HVT1
I8190NXXA
Click to expand...
Click to collapse
Are you above to advice me what is the correct firmware (rom) I need with the above details?
Best Regards.
You should try kies. It will find the correct ROM but I didnt use it and its diffrent from ODIN
Kies does not work, when you have kies loaded and then plug the usb cable into the phone kies just shows connecting but fails to connect or do anything else.
You need to unistall ODIN. Did you entered your phone S/N and did kies download the files ?
simbilli said:
You should try kies. It will find the correct ROM but I didnt use it and its diffrent from ODIN
Click to expand...
Click to collapse
Here are some question about Kies.
Does Kies detect a rooted device and deny its USB connection?
Or limit any feature on it?
I`m facing a problem using Odin and USB connection while
trying to flash TWRP update on my Samsung Galaxy S3 Mini (GT-I8190N).
i have no issue using Kies to make a backup before, so i`m guesting that`s the reason.
my solution was to uninstall Kies temporarily(keeping the backup files).
Its no major problem, just trying to communicate and share opinions in this forum.
Anyone having/had this kind of problem?
Naimlaaa said:
Here are some question about Kies.
Does Kies detect a rooted device and deny its USB connection?
Or limit any feature on it?
I`m facing a problem using Odin and USB connection while
trying to flash TWRP update on my Samsung Galaxy S3 Mini (GT-I8190N).
i have no issue using Kies to make a backup before, so i`m guesting that`s the reason.
my solution was to uninstall Kies temporarily(keeping the backup files).
Its no major problem, just trying to communicate and share opinions in this forum.
Anyone having/had this kind of problem?
Click to expand...
Click to collapse
Did you installed USB drivers ?
simbilli said:
Did you installed USB drivers ?
Click to expand...
Click to collapse
I did. Probably after done the backup via Kies, I think (not sure the exact time).
I was looking forward on flashing custom ROMs.
Naimlaaa said:
I did. Probably after done the backup via Kies, I think (not sure the exact time).
I was looking forward on flashing custom ROMs.
Click to expand...
Click to collapse
Ok now If you installed USB drivers flash twrp via ODIN. Donf forget to unistall kies.
simbilli said:
Ok now If you installed USB drivers flash twrp via ODIN. Donf forget to unistall kies.
Click to expand...
Click to collapse
Thank you simbili Bro. Will flash -f2fs 2.8.1.0 version. i just got an update of CM11 Rom, maybe will use it on my Mini`s. Thanks again simbili.
:highfive:
Your welcome
I will be happy If you use thanks button :good:
simbilli said:
Your welcome
I will be happy If you use thanks button :good:
Click to expand...
Click to collapse
Done. :good:
What does the "thanks" button main effect anyway?
Naimlaaa said:
Done. :good:
What does the "thanks" button main effect anyway?
Click to expand...
Click to collapse
It just effects thanks meter not a big thing