Related
I tried to flash many roms on my cell without any succes, so i wonder if anyone can tell me wich rom should i install via original recovery sideload, I got an xt1063 type MOFB9 ON TITAN_UMTS:4.4.4/kxb21.85-23/21
Please i know i can flash and downgrade many roms via fasboot,or custome recovery twrp or pholz, but i want to know, if in original, i got the latest , or what would be the next rom to flash acording to the system i have. thanks for the help.
abispac said:
I tried to flash many roms on my cell without any succes, so i wonder if anyone can tell me wich rom should i install via original recovery sideload, I got an xt1063 type MOFB9 ON TITAN_UMTS:4.4.4/kxb21.85-23/21
Please i know i can flash and downgrade many roms via fasboot,or custome recovery twrp or pholz, but i want to know, if in original, i got the latest , or what would be the next rom to flash acording to the system i have. thanks for the help.
Click to expand...
Click to collapse
http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25&page=1ALL MOTO G firmware available (1st, 2nd and 3rd Gen) pick correct XT1063 in your case
reefuge said:
http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25&page=1ALL MOTO G firmware available (1st, 2nd and 3rd Gen) pick correct XT1063 in your case
Click to expand...
Click to collapse
Thank you sir, but i see this roms end in xml, wich i think are for flashing via fasboot? if im wrong please correct me, im looking for the ota original to flash via original recovery.
abispac said:
Thank you sir, but i see this roms end in xml, wich i think are for flashing via fasboot? if im wrong please correct me, im looking for the ota original to flash via original recovery.
Click to expand...
Click to collapse
thats correct these are via ADB mfastboot (which ignores OTA fingerprint check) as flashes full firmware, not the ota.zip which is only a smaller (not full firmware) update
ota.zip is NOT full firmware, so will not fix a corrupted / altered or non stock firmware
but you say you've flashed many roms.... you need to be on correct rom and matching recovery and also un-rooted to flash a OTA.zip as it checks Recovery version and the build fingerprint inside /system folder of original stock rom. if any of these mismatch it will fail.
also (apologies if wrong) but dont you believe your phone to be corrupted or read only hence why you cant flash images?
reefuge said:
thats correct these are via ADB mfastboot (which ignores OTA fingerprint check) as flashes full firmware, not the ota.zip which is only a smaller (not full firmware) update
ota.zip is NOT full firmware, so will not fix a corrupted / altered or non stock firmware
but you say you've flashed many roms.... you need to be on correct rom and matching recovery and also un-rooted to flash a OTA.zip as it checks Recovery version and the build fingerprint inside /system folder of original stock rom. if any of these mismatch it will fail.
also (apologies if wrong) but dont you believe your phone to be corrupted or read only hence why you cant flash images?
Click to expand...
Click to collapse
Chanses are my phone its corrupted, i had the hope that a mayor ota, such a 5.0 (not5.0.2) would rewrite the phone and fix it, as the olny option i have not be able to tried was install an original ota or rom via recover sideload. I got recovery KXB21.85-23. Are there any fixes for read only out there? because i have found non....
Thanks for the help thought.
abispac said:
Chanses are my phone its corrupted, i had the hope that a mayor ota, such a 5.0 (not5.0.2) would rewrite the phone and fix it, as the olny option i have not be able to tried was install an original ota or rom via recover sideload. I got recovery KXB21.85-23. Are there any fixes for read only out there? because i have found non....
Thanks for the help thought.
Click to expand...
Click to collapse
what error do you get via ADB when you flash?
can you remember what was the original firmware on phone as several for xt1063
or if boots the system version in about phone
reefuge said:
what error do you get via ADB when you flash?
can you remember what was the original firmware on phone as several for xt1063
or if boots the system version in about phone
Click to expand...
Click to collapse
Phone wont boot, its gets to the point where a blue m apears the goes to a blank screen, when flahing a rom via fasboot, all seems to get right but after restart is like nothing happened, i go back to the same state, same thing happens with twrp or philz, if you want to help, we can continue here but your more then wellcome to read this (nevermind i see you allready did)
So let me make a backup of twrp and see if i can post results, thanks allot, iveen waiting to fix this for so many days now.
A bit of background, i consider myself an advance user, someone that can google problems and fix stuff with it, ivee flashed alot of cellphones in the past ,many xt1064 and other models, just like everybody ealse, easy and no problems, but this one i just cant figure out. Seems like its on read only mode or freezed as a deepfreezed computer, dont mater how many roms i flash and the way i do, everything comes back to the same state, even if i reforma partitions, eeven if i delete pictures or folders, they come back once i reboot.
Its going to take 5hrs to upload my backup
abispac said:
Phone wont boot, its gets to the point where a blue m apears the goes to a blank screen, when flahing a rom via fasboot, all seems to get right but after restart is like nothing happened, i go back to the same state, same thing happens with twrp or philz, if you want to help, we can continue here but your more then wellcome to read this (nevermind i see you allready did)
So let me make a backup of twrp and see if i can post results, thanks allot, iveen waiting to fix this for so many days now.
A bit of background, i consider myself an advance user, someone that can google problems and fix stuff with it, ivee flashed alot of cellphones in the past ,many xt1064 and other models, just like everybody ealse, easy and no problems, but this one i just cant figure out. Seems like its on read only mode or freezed as a deepfreezed computer, dont mater how many roms i flash and the way i do, everything comes back to the same state, even if i reforma partitions, eeven if i delete pictures or folders, they come back once i reboot.
Click to expand...
Click to collapse
ok ii'm thinking corrupted partitions too.... but if you are willing to try i've made a xt1063 easy installer script for you to try now normally i work on xt1068 and would test on my xt1068 - so have NO xt1063 its UNTESTED - use at own risk.....
just stock firmware / drivers / adb and mfastboot ( same as my xt1068 script) I see no reason it should not be compatible.
download to pc / unzip to folder / read instruction inside
https://mega.co.nz/#!Tok2DJ6T!ggMoQDfAzuA7cmQQjbGCbXolWZTnx_567vG02CiURVsxt1063 4.4.4 easy installer
I repeat it YOUR choice - if it works- great - if runs ok but rom remains same would suggest somethings corrupt - if it doesnt work at all back to square 1....
now im presuming your boot loader is unlocked, as will fail if locked or relocked - if you use and get error please report what they are, i would have done 5.0.2 but its only 50% downloaded with a 1 hr+ to still go, estimate 2 hrs from time of this post until I can post a link
im uploading the backup, in the mean time i dont know if this is of any use ,its the recovery log zipped...
abispac said:
im uploading the backup, in the mean time i dont know if this is of any use ,its the recovery log zipped...
Click to expand...
Click to collapse
just to let you know TWRP is now 2.5.8.0 fixes some bugs cause older versions know to break permissions in Lollipop!!
https://mega.co.nz/#!Dx03wTbD!3sDFubGomhegQqdoGzNb1RWnQwApzyaTlVq69uX1TqkFlash-able version (unzip to pc and flash from there) 2.5.8.0
https://mega.co.nz/#!n5cUQCAY!uf66vEcQlmtu6VZMLPxksEFMEioZUFpystzTP6kwU4I Temporary boot version (no flash) 2.5.8.0.
will look but cant promise
I tried your easy install tool, brand new drivers, diferent usb port, all went smooth but after restart, im at the same situation. Funny thing, and ivee done this multiple times, after reflashing a new rom, most of them never give errors, then after nothing happens , i flash twrp and boot it, and all the files (the original ones , not the just flashed ones) are there intact, even pictures and music.
abispac said:
I tried your easy install tool, brand new drivers, diferent usb port, all went smooth but after restart, im at the same situation. Funny thing, and ivee done this multiple times, after reflashing a new rom, most of them never give errors, then after nothing happens , i flash twrp and boot it, and all the files (the original ones , not the just flashed ones) are there intact, even pictures and music.
Click to expand...
Click to collapse
ok have you tried mfastboot erase userdata and mfastboot erase cache? from a command window?
i.m interested in the I flash twrp and boot..... does this mean you are able to replace recovery with a custom recovery ON phone
rather than temporary booting into it?
reefuge said:
ok have you tried mfastboot erase userdata and mfastboot erase cache? from a command window?
i.m interested in the I flash twrp and boot..... does this mean you are able to replace recovery with a custom recovery ON phone
rather than temporary booting into it?
Click to expand...
Click to collapse
Yeah i tried those erase commands many many times and same result, i cant replace recovery at all, only boot of it, so when i do " mfastbooot flash recovery twrprecovery.img " then try to boot of recovery, i boot into factory recovery not, twrp, but if i do, "mfasboot boot twrprecovery.img" i can see the recovery img gets flashed and the phone boots of twrp. Weird behavior. So when i notice that i tried to flash a rom with mfastboot, and at the end i gave the command mfasboot boot recovery.img (the original rom recovery) then it gets flashed, and phone reboots, but i gets stuck at the motorola logo. This phone its playing hard to get....
heres, my backup https://mega.co.nz/#!md0AwbLR!uWe9PLklIugOziPLV6O_plbU-Zz9EXbqRvUVpYxECk0 hope you can find something.
Im going to take this phone to a shop to see if they can fix it as i have lost all hope, thanks refuuge for your help.
Hello!
This is actually a common "thing" across many devices so just because this thread is on the Oneplus 5 forum doesn't mean it won't work for your device!
So I know exactly what you're going through....
THE PROBLEM
You've flashed a Zip file, everything seemed to work fine, you pressed the reboot button.... But then... Black screen, blue LED (or something like that)....
You then try to reboot to recovery and then you see "Running Open Recovery Script" and you manage to decipher "Wiping Data", either you clean flashed your ZIP file and this is not a problem or you dirty flashed it and so you're screaming at your phone because it just wiped everything without you asking (I mean, this never happened to me or anything I'm just trying to imagine what it would look like :crying
You then try a few things but you're phone won't even get close to the Bootanimation and keeps trying to boot up into recovery and keeps on Wiping your data which is now non-existent.
THE FIX :fingers-crossed:
Method 1/
This is the most convenient and easiest method but it might not work for you, I'm not even entirely sure how I made it work for me... Anyway:
Once the phone has booted up into recovery and is flashing the ZIP, try the following:
WILL UPDATE AS SOON AS I FIND THE EXACT METHOD
-Taking a screenshot (Power+volume)
-Pressing the back, home and récents button as many times as you can
-Pressing the power button
Basically, for now until I'm certain on what gets you out of this script thing, press every button on the phone a few times (that's what I did)
Click to expand...
Click to collapse
Method 2 [FAILSAFE]/
This method will work no matter what (if your problem is the one this thread covers that is), but it's quite teedious!
Step1/ Boot into the Bootloader (Power+Volume up)
Step2/ Install ADB & Fastboot on your PC (Google)
Step3/Download Stock recovery & TWRP
Step 4/Move both files to the ADB folder for ease of access
Step5/Type in
Code:
fastboot flash recovery STOCK_RECOVERY.img
(change file name)
Step 6/Boot into this new recovery
Step 7/ Ponder for a minute at how useless it is
Step 8/Boot into Bootloader again
Step 9/Type into terminal
Code:
fastboot flash recovery TWRP_RECOVERY.img
(change file name)
Step 10/Boot into recovery and wipe everything except Internal storage
Step 11/Flash ROM again!
VOILA! :fingers-crossed:
Hope it helped, if you have any questions, feel free to ask me!
Cheers, Matt
I had this issue when I was flashing various roms, in my case it ended up being that some of the roms were incompatible with data being formatted as ext4 (mainly oos based ones, but a few others as well) since I went full f2fs, haven't seen this issue. That might be something to consider adding, it's pretty destructive, though, as going with f2fs on /data formats /sdcard, too
I had this issue when I was flashing various roms (xXx NoLimits, ExperienceOS) on the encrypted data partition. Only FreedomOS flashing and booting ok
dragynbane222 said:
I had this issue when I was flashing various roms, in my case it ended up being that some of the roms were incompatible with data being formatted as ext4 (mainly oos based ones, but a few others as well) since I went full f2fs, haven't seen this issue. That might be something to consider adding, it's pretty destructive, though, as going with f2fs on /data formats /sdcard, too
Click to expand...
Click to collapse
Ahh, that's interesting
R0iZ said:
I had this issue when I was flashing various roms (xXx NoLimits, ExperienceOS) on the encrypted data partition. Only FreedomOS flashing and booting ok
Click to expand...
Click to collapse
I had it on my old phone once (Oneplus X) so it's not rom/device specific... And I don't think it's a bug, more a compatibility issue...
first method doesnt work for me (and i have not expecting it to work)
second method should work but i have a little problem, i cant boot into bootloader
can someone help me with this
phone: Doogee X5
Fyzik753 said:
first method doesnt work for me (and i have not expecting it to work)
second method should work but i have a little problem, i cant boot into bootloader
can someone help me with this
phone: Doogee X5
Click to expand...
Click to collapse
You can't boot into bootloader? Are you sure? Long less power + Volume up
Fyzik753 said:
first method doesnt work for me (and i have not expecting it to work)
second method should work but i have a little problem, i cant boot into bootloader
can someone help me with this
phone: Doogee X5
Click to expand...
Click to collapse
Are you trying to install/fix TWRP designed for OnePlus 5 into a different phone? Good luck!
i have a problem with instaling twrp ...
example:
phone have bootloader unlocked
flashing original 4.5.14 firmware .... all good ... boot phone ... settings ... done
reboot to bootloader ... flash twrp (or blu_spark twrp) ... done ... reboot to twrp .. all good
reboot to system ... done. poweroff (or restart)...
boot to recovery ... surprise ... original recovery ... not twrp
flash again twrp ... done ... boot to system ... reboot to recovery ... original recovery ....
saw .. what is going on ?
thanks
aoprea said:
i have a problem with instaling twrp ...
example:
phone have bootloader unlocked
flashing original 4.5.14 firmware .... all good ... boot phone ... settings ... done
reboot to bootloader ... flash twrp (or blu_spark twrp) ... done ... reboot to twrp .. all good
reboot to system ... done. poweroff (or restart)...
boot to recovery ... surprise ... original recovery ... not twrp
flash again twrp ... done ... boot to system ... reboot to recovery ... original recovery ....
saw .. what is going on ?
thanks
Click to expand...
Click to collapse
OxygenOS overwrites the recovery with stock one when you boot into the OS..
to avoid this, after flashing twrp, (without rebooting to system) flash SuperSU or Magisk immediately..
iamelton said:
OxygenOS overwrites the recovery with stock one when you boot into the OS..
to avoid this, after flashing twrp, (without rebooting to system) flash SuperSU or Magisk immediately..
Click to expand...
Click to collapse
thanks ... solved with install magisk
ps. I was accustomed with samsung phones where this does not happen...
Hi, I hope there's somebody who can help me with this.
I think, method could help me, but when I try to flash the recovery, I get this message:
Code:
target reported max download size of 535822336 bytes
sending 'recovery' (27525 KB)...
OKAY [ 0.914s]
writing 'recovery'...
(bootloader) Image size exeeded partition limits
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.954s
Any Ideas to solve this?
iamelton said:
OxygenOS overwrites the recovery with stock one when you boot into the OS..
to avoid this, after flashing twrp, (without rebooting to system) flash SuperSU or Magisk immediately..
Click to expand...
Click to collapse
i have op5
i don't know what should i do - i install magisk and twrp - is it in the twrp i do that i wipe and i flash rom
but i find the some problem open and after boot i don't found the twrp and my recovery return to official recov
please help
my phone without root is worthless
Im_Mattgame said:
Hello!
This is actually a common "thing" across many devices so just because this thread is on the Oneplus 5 forum doesn't mean it won't work for your device!
So I know exactly what you're going through....
THE PROBLEM
You've flashed a Zip file, everything seemed to work fine, you pressed the reboot button.... But then... Black screen, blue LED (or something like that)....
You then try to reboot to recovery and then you see "Running Open Recovery Script" and you manage to decipher "Wiping Data", either you clean flashed your ZIP file and this is not a problem or you dirty flashed it and so you're screaming at your phone because it just wiped everything without you asking (I mean, this never happened to me or anything I'm just trying to imagine what it would look like :crying
You then try a few things but you're phone won't even get close to the Bootanimation and keeps trying to boot up into recovery and keeps on Wiping your data which is now non-existent.
THE FIX :fingers-crossed:
Method 1/
This is the most convenient and easiest method but it might not work for you, I'm not even entirely sure how I made it work for me... Anyway:
Once the phone has booted up into recovery and is flashing the ZIP, try the following:
Method 2 [FAILSAFE]/
This method will work no matter what (if your problem is the one this thread covers that is), but it's quite teedious!
Step1/ Boot into the Bootloader (Power+Volume up)
Step2/ Install ADB & Fastboot on your PC (Google)
Step3/Download Stock recovery & TWRP
Step 4/Move both files to the ADB folder for ease of access
Step5/Type in
Code:
fastboot flash recovery STOCK_RECOVERY.img
(change file name)
Step 6/Boot into this new recovery
Step 7/ Ponder for a minute at how useless it is
Step 8/Boot into Bootloader again
Step 9/Type into terminal
Code:
fastboot flash recovery TWRP_RECOVERY.img
(change file name)
Step 10/Boot into recovery and wipe everything except Internal storage
Step 11/Flash ROM again!
VOILA! :fingers-crossed:
Hope it helped, if you have any questions, feel free to ask me!
Cheers, Matt
Click to expand...
Click to collapse
You saved me bro my life is your from now thankyou love u♥
hi guys,
yesterday i installed the oreo beta on my VTR-L29 but then i brickedd it *cry*. unfortunateley the unbrick methods found here in the forum don't work because the oreo update made some changes in the system file structure...
has anyone an idea what to do?
maybe someone can provide me a recovery image for twrp? (one for oreo, otherwise it wont work) so i can give this a try...
after over 10 hours of fiddeling around a found a really easy solution:
most of you know HWOTA helps with this, but the "normal" version wont work after flashing oreo. but this version is flashed via twrp and is still working!
but you will need a oreo compatible twrp, which you can find here
i know the links are to mate 9 software, but since the p10 and mate 9 are nearly identical, it works on the p10 as well
can you post the step by step guide?
i am on oreo 8.0.0.046 and want to flash another version, or downgrade to nougat because few things don't work on this version
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
johdost said:
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
Click to expand...
Click to collapse
failed install twrp- error find twrp 3.0.3, and i replaced to oero mate 9 recovery....
EDIT: success - problem was on the computer
johdost said:
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
Click to expand...
Click to collapse
i did sucsses to install twrp but on the second step, when i press on install on twrp, the phone restart to erocovey and failed to find the files. what am i doing wrong?
i think that i am stuck with that version forever....
if you reboot to erecovery, you have not successfully installed twrp. you have to install it with "fastboot flash recovery_ramdisk <path to twrp>"
johdost said:
if you reboot to erecovery, you have not successfully installed twrp. you have to install it with "fastboot flash recovery_ramdisk <path to twrp>"
Click to expand...
Click to collapse
you misunderstood me.
i do have twrp, i created HWOTA8 folder on sd card, copied hwota8 update zip, MHA_RECOVERY8 No check and the 3 files that i renamed as it said. after that, from twrp i clicked on hwota8 update zip and begin flash, the phone reboot to stock recovery and failed to install - "files don't found".
please help me fegure out what's the problem.
thanks
t.h.i said:
you misunderstood me.
i do have twrp, i created HWOTA8 folder on sd card, copied hwota8 update zip, MHA_RECOVERY8 No check and the 3 files that i renamed as it said. after that, from twrp i clicked on hwota8 update zip and begin flash, the phone reboot to stock recovery and failed to install - "files don't found".
please help me fegure out what's the problem.
thanks
Click to expand...
Click to collapse
EDIT : the process is sucsses, but its the same version.... 8.0.0.046
Bricked, no TWRP access, any ideas?
Hi.
I know this about a P10, I have a P10 Plus (VKY-L29C605), but the process should be similar, I think.
I bricked my phone after succesfully upgrading from B174 to B321 using HWOTA. After which I decided, since I was at it, to flash the Hyperplus Kernel. This led to a bootloop. To fix it I decided to just go ahead and HWOTA B321 all over again and get over it, and would have probably gone just fine, except I decided to rebrand (C605 > C432) while I was doing that, silly (no, stupid) mistake. This led to the brick I am currently expriencing, I have no recovery access, erecovery or TWRP.
So now I am left trying to unbrick the phone. I extracted the UPDATE.APP for both update_all_hw.zip and update.zip using the Huawei Extractor Tool with no difficulty, except unbricking methods ask for boot.img, which I could not find, so I went along without it and flashed: cust.img, recovery_ramdisk.img (using fastboot recovery_ramdisk command for Oreo), and system.img. All of the commands completed succesfully, but no shebang, still bricked and no recovery access. I figure this has to do with the rebrand as the result after executing the command "fastboot getvar vendorcountry" shows the rebrand pulled through (hw/eu 432).
I am currently downloading HWOTA8.zip (3GB worth of download) to see if I can do something it. I am also downloading the L29C432B360 OTA-FULL, since I believe I am not getting any progress becuase I used the updates for L29C605B321.
The kind people at funkyhuawei told me they could fix it with their tool, but I don't have the money for that right now.
I will post updates, but any ideas would be greatly appreciated.
Many of us have posted over this in the last couple of days. Seems like Funky Huawei unbrick tool was the mehtod to get it work for me. You could try that!
or use dc-phoenix for me it worked (= in the moment i try to capture the usb ports kommunikation so i have the tool with the aktual firmware longer for 3 days :silly:
would first give dc a try 20 bucks for 3 days is ok i think (=
johdost said:
hi guys,
yesterday i installed the oreo beta on my VTR-L29 but then i brickedd it *cry*. unfortunateley the unbrick methods found here in the forum don't work because the oreo update made some changes in the system file structure...
has anyone an idea what to do?
maybe someone can provide me a recovery image for twrp? (one for oreo, otherwise it wont work) so i can give this a try...
Click to expand...
Click to collapse
Must download some software for your phone, unzip update.zip, decompile UPDATE.APP to .iso files, (like recovery.iso, system, iso, vendor iso, boot iso) use fastboot and 10 minuts job, I brik my device over 10 thimes, and repair it.
So I was able to get the C432B360 firmware and I flashed it, but no I can't enter recovery mode because the battery is low (red lightning bolt/red led flash). Anybody know how to charge or force recovery mode boot from fastboot?
If anyone needs, can use my DC-Phoenix account, I don`t need it anymore.
Your username is: cesedy
Your password is: dnL4eHEm
Greting
ure3808 said:
Must download some software for your phone, unzip update.zip, decompile UPDATE.APP to .iso files, (like recovery.iso, system, iso, vendor iso, boot iso) use fastboot and 10 minuts job, I brik my device over 10 thimes, and repair it.
Click to expand...
Click to collapse
Greeting,
Can you explain the procedure of how to do it?
Thank you
Hi everyone.
I was trying to flash Nitrogen OS. First I flashed the latest firmware, then the actual rom and then GAPPS. After that my mobile got stuck in Oneplus logo without being able to go into recovery mode.
I tried using fastboot to flash the files in this thread(https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306) which worked once, but even after that I can't surpass the logo screen.
I've been trying to look for information but I can't find anything.
To clarify:
- I already tried erasing userdata and cache from fastboot
-I already tried flashing recovery images from twrp, stock and bluspark
Thanks in advance guys.
Pavononer23 said:
Hi everyone.
I was trying to flash Nitrogen OS. First I flashed the latest firmware, then the actual rom and then GAPPS. After that my mobile got stuck in Oneplus logo without being able to go into recovery mode.
I tried using fastboot to flash the files in this thread(https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306) which worked once, but even after that I can't surpass the logo screen.
I've been trying to look for information but I can't find anything.
Thanks in advance guys.
Click to expand...
Click to collapse
Which TWRP are you using? Which firmware are you flashing? You can't access recovery at all? I've run into plenty of bricks like this and I'm usually able to get back to recovery by forcing the device off (vol up + power hold) and rebooting back to recovery. and if that doesn't work I can at least get to the bootloader and re-flash a recovery file.
rykanator said:
Which TWRP are you using? Which firmware are you flashing? You can't access recovery at all? I've run into plenty of bricks like this and I'm usually able to get back to recovery by forcing the device off (vol up + power hold) and rebooting back to recovery. and if that doesn't work I can at least get to the bootloader and re-flash a recovery file.
Click to expand...
Click to collapse
I was using last bluspark recovery. I was flashing OB21 when everything happened.
There is no way I can access to recovery. I tried reflashing the stock recovery from that unbricking thread with all the other things through fastboot and I can't boot into recovery at all. It is the first time I face this error so I am lost.
Pavononer23 said:
I was using last bluspark recovery. I was flashing OB21 when everything happened.
There is no way I can access to recovery. I tried reflashing the stock recovery from that unbricking thread with all the other things through fastboot and I can't boot into recovery at all. It is the first time I face this error so I am lost.
Click to expand...
Click to collapse
can you boot into the bootloader/fastboot?
rykanator said:
can you boot into the bootloader/fastboot?
Click to expand...
Click to collapse
Yes I can
Pavononer23 said:
Yes I can
Click to expand...
Click to collapse
okay, well what I would do is boot into the bootloader, and then reflash the blu_spark recovery via adb so you can boot into it. then wipe everything and restart. but this time I would try the OB 20 firmware and not the 21. when I was on NOS I used that one and it worked just fine. I'm not sure if it made a difference, but I flashed the firmware both right before and right after flashing NOS
rykanator said:
okay, well what I would do is boot into the bootloader, and then reflash the blu_spark recovery via adb so you can boot into it. then wipe everything and restart. but this time I would try the OB 20 firmware and not the 21. when I was on NOS I used that one and it worked just fine. I'm not sure if it made a difference, but I flashed the firmware both right before and right after flashing NOS
Click to expand...
Click to collapse
It doesnt recognize my device through adb and I don't know why. If that worked I would have tried to sideload some firmware, but when I do adb devices it doesn't appear
Pavononer23 said:
It doesnt recognize my device through adb and I don't know why. If that worked I would have tried to sideload some firmware, but when I do adb devices it doesn't appear
Click to expand...
Click to collapse
idk if it'll recognize as an adb device if it's in the bootloader. maybe try fastboot devices? sorry, I'm just spitballin here
rykanator said:
idk if it'll recognize as an adb device if it's in the bootloader. maybe try fastboot devices? sorry, I'm just spitballin here
Click to expand...
Click to collapse
Somehow fastboot devices does send me that my device is there but adb devices no, I will try looking into that to see if that works. Thanks for the help anyway
Pavononer23 said:
Somehow fastboot devices does send me that my device is there but adb devices no, I will try looking into that to see if that works. Thanks for the help anyway
Click to expand...
Click to collapse
yeah! try fastboot flash recovery "recovery file name".img
make sure that recovery img file is in the platform-tools file (or wherever your adb files are) and see if that works!
rykanator said:
yeah! try fastboot flash recovery "recovery file name".img
make sure that recovery img file is in the platform-tools file (or wherever your adb files are) and see if that works!
Click to expand...
Click to collapse
It is not working, I think I lost my Oneplus 3t...
Pavononer23 said:
It is not working, I think I lost my Oneplus 3t...
Click to expand...
Click to collapse
I mean idk if you wanna do this, but you could always try to "format userdata", then flash the stock recovery, and then sideload OOS. but you would lose all of your data in your internal storage, and it's still not a guarantee. there are some posts about doing a full wipe and starting from scratch. I'd look into those. Best of luck reviving your OP3T
Pavononer23 said:
It is not working, I think I lost my Oneplus 3t...
Click to expand...
Click to collapse
just a tip, try posting the output instead of "it's not working",
so the devs here might be able to analyze the problem..
nicknacknuke said:
just a tip, try posting the output instead of "it's not working",
so the devs here might be able to analyze the problem..
Click to expand...
Click to collapse
I already post a lot of information on the first post:
Mobile not passing the first time Oneplus logo appears.
Only fastboot is working, not adb, not recovery.
I already tried flashing other recoveries and the stock one->Can't pass Oneplus logo anyway
Tried formatting userdata through fastboot and flashing the .img files from my first post->Not working
Then just do the Qualcomm restore and unlock, boot to fastboot and flash the latest TWRP. Then boot into TWRP and format cache partitions, system and data and then adb sideload using this option under TWRP advanced to flash firmware zip, NitrogenOS zip and then 8.1 Gapps and try booting to see if same thing happens again. You are using the NitrogenOS stock kernel and not some other?
pitrus- said:
Then just do the Qualcomm restore and unlock, boot to fastboot and flash the latest TWRP. Then boot into TWRP and format cache partitions, system and data and then adb sideload using this option under TWRP advanced to flash firmware zip, NitrogenOS zip and then 8.1 Gapps and try booting to see if same thing happens again. You are using the NitrogenOS stock kernel and not some other?
Click to expand...
Click to collapse
What do you mean by the Qualcomm restor and unlock? I already tried the flashing of latest TWRP and it did not work.
I was coming from Validus last beta but did a previous factory reset and that stuff.
Thank you for the answer
Pavononer23 said:
What do you mean by the Qualcomm restor and unlock? I already tried the flashing of latest TWRP and it did not work.
I was coming from Validus last beta but did a previous factory reset and that stuff.
Thank you for the answer
Click to expand...
Click to collapse
What he meant is probably unbrick tool - https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
Try flashing official firmware with it and then try again by flashing TWRP and flashing Nitrogen.
przemcio510 said:
What he meant is probably unbrick tool - https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
Try flashing official firmware with it and then try again by flashing TWRP and flashing Nitrogen.
Click to expand...
Click to collapse
I can't install the drivers:
-First, stupid Windows policy saying that its driver is the best one available.
-Second, choosing from a disk to avoid one saying that the driver is not a x64 one.
Pavononer23 said:
I already post a lot of information on the first post:
Mobile not passing the first time Oneplus logo appears.
Only fastboot is working, not adb, not recovery.
I already tried flashing other recoveries and the stock one->Can't pass Oneplus logo anyway
Tried formatting userdata through fastboot and flashing the .img files from my first post->Not working
Click to expand...
Click to collapse
None of that answer what he actually asked, which is: what was the output (error message, result, etc.) when you tried to flash TWRP?
Did it flash successfully, but still can't boot to TWRP? Or else, what was the exact error message?
In general, when asking for help and giving status, be specific as possible, and give as many details as possible. Saying you "tried xxx" or "it did not work" is not specific enough.
Seems silly, but I've seen a lot of times where it's as simple as the user not using the correct command or entering the right file name.
redpoint73 said:
None of that answer what he actually asked, which is: what was the output (error message, result, etc.) when you tried to flash TWRP?
Did it flash successfully, but still can't boot to TWRP? Or else, what was the exact error message?
In general, when asking for help and giving status, be specific as possible, and give as many details as possible. Saying you "tried xxx" or "it did not work" is not specific enough.
Seems silly, but I've seen a lot of times where it's as simple as the user not using the correct command or entering the right file name.
Click to expand...
Click to collapse
There were no errors when flashing TWRP. When I tried rebooting using fastboot(fastboot boot recovery.img) it got stuck in the message saying booting up... and the only thing that changed was that my phone left the bootloader screen to a screen with the Oneplus logo and a fastboot mode message under it.
The command I used was fastboot flash recovery recovery.img(Name of the actual recovery file)
**URGENT** i have my p20 pro 6/128 with 9.0 last version ROOTED somehow i found a article.. the root was success. Tried to flash official twrp with twrp app and then everything was like HELL.
If i let my phone boot says error! func no: 10 boot image. error no :2 load failed. i faced something simillar when trying to get into recovery sometimes.
I can get into erecovery cant format or download official firmware. I can get into fastboot, download mode. I am gonna tell you everything . every program i tried AND FAILED!
TRIED: multi tool for huawei ( i download a version i think its 165 something when i press flash selected the program closed)
TRIED: to FLASH like 10 times ramdisks, recoverys, CANT FIND BOOT.IMG.
TRIED: Re-flash 9.0 says missing zip files THATS IMPOSIMPLE NOTHING IS MISSING I AM SURE
TRIED: a guide that said to download firmware and i would find a folder named DLOAD. i did everything. COULDNT FLASH SOMETHING ON DOWNLOAD SAYS ERROR
TRIED: ALMOST EVERYTHING
PLEASE HELP ME, HOW TO FIX IT? its very important for me and for everyone who is facing the same problem
Phone infos From Multi tool program http://prntscr.com/min398
and the firmwares i tried 1) http://prntscr.com/min3tn
2) http://prntscr.com/min40j
SEE SOME POSTS BELLOW TO SEE HOW I FIXED IT SUCCESS AFTER MANY ERRORS
1 found this post, and flashed all of them BUT there is not ramdisk on the files. i looked on two different firmwares which should i flash over ramdisk which doesnt exist?
first i run the command fastboot flash kernel kernel.img and i could boot into TWRP for first time. now i cant.
there are not errors for now. only if i boot my phone says phone keeping booting.
when i got to twrp and tried to reboot into system said there is no OS.
How and which os i should flash? since Multi tool program kicks me
HELP
https://forum.xda-developers.com/honor-9/help/help-softbricked-h9-oreo-t3750282
So you're typing a little erratic.
Can you get to eRecovery? This is your best option..
If not then you'll need to reflash all the parts of the OS back to the phone manually..
Beyond that you'll need a recovery method, not sure if it's a device of a program but it can usually help, depends on what is borked.
dladz said:
So you're typing a little erratic.
Can you get to eRecovery? This is your best option..
If not then you'll need to reflash all the parts of the OS back to the phone manually..
Beyond that you'll need a recovery method, not sure if it's a device of a program but it can usually help, depends on what is borked.
Click to expand...
Click to collapse
i can get into erecovery i cannot download the official and flash it throught there says error.. what else i can do
I cant understand what yyou saying here Beyond that you'll need a recovery method, not sure if it's a device of a program but it can usually help, depends on what is borked.
I get into Erecovery if i press download latest version and recovery after some times when i put the wifi pass says error. Error i got also on HIsUite when i tried to format from there and download the latest versio. So we go manually but HOW? i tried almost everything
i tried this https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
success all command went trhough the phone
the problem is i cannot flash twrp
my phone has unlocked bl
well i did a lot of search if you ask me i download 5-7 different programs that can flash stock firmware. ONE seems to be legit for 9.0 RE-flash 9.0 which has commands on its script like this guy says and he helped me too
https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
also if someone cant boot into twrp after the frist steps and see the erecovery just format everything from erecovery and then it will boot to twrp.
also now says installing update.
i hope imeis serial numbers etc wont lost..
Thats the script i found i dont remeber where
http://prntscr.com/mitvum
but i can upload somewhere the files
if you run FLASH.bat and says MISSING ZIPS then remove the update."zip" {ZIP PREFIX FROM THE NAME OF THE FILES ONLY} and run again the bat
the procedure may take 10-30 mins
What about the otg method?
Also I would never use a tool like this.
StonebridgeGr said:
**URGENT** i have my p20 pro 6/128 with 9.0 last version ROOTED somehow i found a article.. the root was success. Tried to flash official twrp with twrp app and then everything was like HELL.
If i let my phone boot says error! func no: 10 boot image. error no :2 load failed. i faced something simillar when trying to get into recovery sometimes.
I can get into erecovery cant format or download official firmware. I can get into fastboot, download mode. I am gonna tell you everything . every program i tried AND FAILED!
TRIED: multi tool for huawei ( i download a version i think its 165 something when i press flash selected the program closed)
TRIED: to FLASH like 10 times ramdisks, recoverys, CANT FIND BOOT.IMG.
TRIED: Re-flash 9.0 says missing zip files THATS IMPOSIMPLE NOTHING IS MISSING I AM SURE
TRIED: a guide that said to download firmware and i would find a folder named DLOAD. i did everything. COULDNT FLASH SOMETHING ON DOWNLOAD SAYS ERROR
TRIED: ALMOST EVERYTHING
PLEASE HELP ME, HOW TO FIX IT? its very important for me and for everyone who is facing the same problem
Phone infos From Multi tool program http://prntscr.com/min398
and the firmwares i tried 1) http://prntscr.com/min3tn
2) http://prntscr.com/min40j
SEE SOME POSTS BELLOW TO SEE HOW I FIXED IT SUCCESS AFTER MANY ERRORS
Click to expand...
Click to collapse
dladz said:
What about the otg method?
Also I would never use a tool like this.
Click to expand...
Click to collapse
like i said in the first post the otg method with the dload folder failed.
Why you wouldnt try it?
StonebridgeGr said:
like i said in the first post the otg method with the dload folder failed.
Why you wouldnt try it?
Click to expand...
Click to collapse
Because I've got no need to mate, manual is always safer.
Have you asked in the thread where you got the tool?
I'm not sure what else to suggest pal
dladz said:
Because I've got no need to mate, manual is always safer.
Have you asked in the thread where you got the tool?
I'm not sure what else to suggest pal
Click to expand...
Click to collapse
now everything is fine but i cant root..
StonebridgeGr said:
now everything is fine but i cant root..
Click to expand...
Click to collapse
Everything is fine? What did you do?
With root Judy follow the instructions that have worked for other people. Don't rush things.
dladz said:
Everything is fine? What did you do?
With root Judy follow the instructions that have worked for other people. Don't rush things.
Click to expand...
Click to collapse
i post i early post a link that helped me a little bit i think i edited the .bat script
also i made a video and post about rooting and everything is fine.
the problem is you can have twrp and magisk root both:/
either you have root and not twrp or either you have twrp and not root