Related
Hi there!
Please, could anyone help me? I'm using AOKP Milestone 6 and changed original kernel, as the original one is causing problems, but no matters which kernel I use, my capacitive buttons lights keep turning on, even when disabled using options and even when those buttons itself are disabled through CWM.
I use navigation bar just like Galaxy Nexus and everytime I touch those buttons or I turn the screen on, their lights turn on also!
What I must do here? Which file I need to edit?
Thanks so much in advance!
On the Ics rom...its done like
Settings-display-touch keylight duration-always off... Nit sure bout other roms..
Mount /system read write.
Edit the file /system/usr/keylayout/sec_touchkey.kl adding the character # at the start of each line.
Mount /system read only.
Reboot.
Will try this right now and report back!
Oh God, it already has "#" before each line. I removed and inserted again, rebooted, and it's still turning on.
Probably it's ridiculous what I'm saying now, but I will return and stay at 40.1 due to this thing. Definitely Milestone 6 without it's native kernel can't handle this disabling capacitive lights things. =/
I just hate these buttons. Hope Galaxy Note 2 came with software buttons! I'm praying for that, but I know it's almost impossible...
viniciusrsouza said:
Oh God, it already has "#" before each line. I removed and inserted again, rebooted, and it's still turning on.
Probably it's ridiculous what I'm saying now, but I will return and stay at 40.1 due to this thing. Definitely Milestone 6 without it's native kernel can't handle this disabling capacitive lights things. =/
I just hate these buttons. Hope Galaxy Note 2 came with software buttons! I'm praying for that, but I know it's almost impossible...
Click to expand...
Click to collapse
Try this
1. Go into Settings -> Display -> Custom Backlight Settings -> Edit other levels... -> And set every "button" field to 0 and save.
2. Turn your brightness settings to "Auto" either via your statusbar widgets/toggles or via the standard Settings -> Display settings.
3. Go back to Home, turn your screen off, wait a second and turn it back on. Notice that the button lights stay off!
If you like to keep keep your screen brightness at Auto, then you're done!
4. Now turn your brightness back to a manual setting. Notice that your buttons light back up. That's okay.
5. Turn your screen off, wait a few seconds, then turn it back on.
6. Now they should be off and will remain off until either you reboot or you toggle the Auto field again (which toggling it simply brings you back to step 5 to fix again).
All credits goes to Jaxidian
Thanks so much for the tips. As I'm back to 40.1, I will try to check this before testing AOKP JB!
By the way, you are using it, right? It worth? Can be used in a daily basis?
Acc
It's it possible to turn on this feature in vetw 3.9.27?
There's such an option (in the settings) , but trying to turn it on, it always turns off by itself.
Sent from note, a phone like never before
jakuburban said:
It's it possible to turn on this feature in vetw 3.9.27?
There's such an option (in the settings) , but trying to turn it on, it always turns off by itself.
Sent from note, a phone like never before
Click to expand...
Click to collapse
Its preety simple..
at ur homescreen hold back button for few seconds and ull have multiwindow...
happy3777 said:
Its preety simple..
at ur homescreen hold back button for few seconds and ull have multiwindow...
Click to expand...
Click to collapse
Oh Yeah, sorry.
I know that there's multiwindow
I've made a mistake.
I meant airview.
Anyway, I've already figured it out.
I simply had to go into the airview settings and enable it (else it wouldnt work).
I have Lumia 520, with "soon to be broken" power buttton. Is there a way to turn it off without using power button ? by some kind of app perhaps ? I can turn it on by plug it in to usb cable and can reboot it by using quick tiles app. Only shutdown is missing.
Any suggestion ?
yokowasis said:
I have Lumia 520, with "soon to be broken" power buttton. Is there a way to turn it off without using power button ? by some kind of app perhaps ? I can turn it on by plug it in to usb cable and can reboot it by using quick tiles app. Only shutdown is missing.
Any suggestion ?
Click to expand...
Click to collapse
Drain the battery so it will turn off by it self?
cevi said:
Drain the battery so it will turn off by it self?
Click to expand...
Click to collapse
Wow, you are absolutely right. How comes I didn't come with that idea. But wait... I did. And while you are at it, Why don't you suggest pulling out the battery -_-
I need something like this :
http://www.windowsphone.com/en-gb/store/app/reboot-now/86cbd073-cbac-4297-be47-5032779eba80
But instead Reboot Now, Perhaps Shutdown Now ?
yokowasis said:
I have Lumia 520, with "soon to be broken" power buttton. Is there a way to turn it off without using power button ? by some kind of app perhaps ? I can turn it on by plug it in to usb cable and can reboot it by using quick tiles app. Only shutdown is missing.
Any suggestion ?
Click to expand...
Click to collapse
There you go, maybe this will be more appropriate to you needs : http://www.windowsphone.com/ro-ro/store/app/quick-tiles/1725cca2-2349-4d33-b5d5-8b04e7810c04
This app. will free all your buttons except for the camera one )) .
yokowasis said:
Wow, you are absolutely right. How comes I didn't come with that idea. But wait... I did. And while you are at it, Why don't you suggest pulling out the battery -_-
I need something like this :
http://www.windowsphone.com/en-gb/store/app/reboot-now/86cbd073-cbac-4297-be47-5032779eba80
But instead Reboot Now, Perhaps Shutdown Now ?
Click to expand...
Click to collapse
Cool your attitude, it's not gonna help. If you have a faulty unit, why not seek replacement or repairs?
I think tier3 apps can't shutdown the phone. There may be something useful in Nokia Care Suit, as it has the ability to put phone into various modes and such, maybe there's a way to shutdown the phone as well. Let me check...
EDIT: Yes, there's an option to shut down the device. However, because it's charging it'll want to turn back on, so you'll have to unplug the USB cable as soon as the display goes dark.
Which part of the power button is "soon to be broken"? If it is the part on the body of the phone, that's no good. Is it just the shell?
Sent from my RM-820_nam_att_100 using XDA Windows Phone 7 App
DaviUnic said:
Cool your attitude, it's not gonna help. If you have a faulty unit, why not seek replacement or repairs?
I think tier3 apps can't shutdown the phone. There may be something useful in Nokia Care Suit, as it has the ability to put phone into various modes and such, maybe there's a way to shutdown the phone as well. Let me check...
EDIT: Yes, there's an option to shut down the device. However, because it's charging it'll want to turn back on, so you'll have to unplug the USB cable as soon as the display goes dark.
Click to expand...
Click to collapse
Okay, good suggestion. But it doesn't exacly what I need because it requires me to plugin my phone to pc just to shut it down. The application I mentioned before able to perform restart, and there is some application here on XDA for shutdown too (but for WP7). If a tier 3 application can do restart, why it can't do a shutdown ? How about native toast launcher, is there some kind of code I need to put there so "the swipe down to shutdown" appear on my phone ?
dragon_76 said:
Which part of the power button is "soon to be broken"? If it is the part on the body of the phone, that's no good. Is it just the shell?
Sent from my RM-820_nam_att_100 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
It is the body, not just the shell.
Apps aren't actually supposed to be able to do shutdown, I think... there are OEM drivers that support it, but there's no public API for it and it *should* require capabilities not available to third-party devs. There's a capability that an app can have to add it, but it's not even available to OEM apps...
From Microsoft.BaseOS.CoreSecurityPolicy.policy.xml:
<Capability ElementID="A299B268AA89DF5B931F8297543C6B205C28D676F8C13EE804C5FA8D117E9233" AttributeHash="57A431AE729DFAECE24FECB94120D6240DAF4E622F53452C73AFE57CBE623979" Id="ID_CAP_BUILTIN_SHUTDOWN" AppCapSID="S-1-15-3-1024-1756535202-1541376426-2541887379-543898708-1993746524-3896427000-2382021892-865238545" SvcCapSID="S-1-5-21-2702878673-795188819-444038987-1039" FriendlyName="Shutdown or reboot the system" Visibility="Internal">
<CapabilityRules>
<Rules>
<Privilege ElementID="B74C20861E4D6DCF0134290FC25B8DD0062C2B9C868C7A662B9B400722D3F133" Id="SeShutdownPrivilege" />
</Rules>
</CapabilityRules>
</Capability>
It's only available to CAPABILITY_CLASS_ENTERPRISE_OEM_VERY_HIGH_ACCESS_APPLICATIONS.
As I said, NCS is your best option. But the phone is really useless without a working power button, so as I said, seek replacement/repairs.
If the 520 is just like the 521 the button should be attached to the shell. Just buy a new shell.
Sent from my RM-917_nam_usa_100 using XDA Windows Phone 7 App
please help my phone get power off and my power button is broken and i cant turn it on. after few try now its always enter to recovery mode but cant select any option dont have button try to connect pc but not reconigze in recovery mod thanks
You officially have a paper-weight now. Does anyone know if there is still a "USB JIG" option for the Note8 and the USB Type-C port?
Anonymously_Unknown said:
You officially have a paper-weight now. Does anyone know if there is still a "USB JIG" option for the Note8 and the USB Type-C port?
Click to expand...
Click to collapse
yes and dont know what to because my screen is a little bit broken and they will charged me new screen for power button
The only way to go would be to change the motherboard, sorry, I always install some apps to reduce the use of the power button since day one, I use gravity screen to awake the screen, and invisible widgets to turn it off, and shortcutter to make a tile to call the power menu, so, I only use the power button to ACTUALLY power the device ON
winol said:
I use gravity screen to awake the screen
Click to expand...
Click to collapse
Here it was, I thought I was being conservative by using fingerprint unlock to save a few presses on my power button.
I wonder if the OP has a saved alarm set to go off at a specific time. I then forgot that the alarm clock doesn't work when the phone is off.
Anonymously_Unknown said:
Here it was, I thought I was being conservative by using fingerprint unlock to save a few presses on my power button.
In fact I even try to save presses on volume buttons via virtual button bar
Click to expand...
Click to collapse
^^^That is taking it too far now. I assume you use wireless charging to save your USB port, and SSH to access your phone remotely, to save your phone from screen burn-in?
Edit: then there is bluetooth speakers / headphones to save the built in speaker.
Hahahaha! Only the wireless charging part too!
i got mine to turn on by doing the downloazd mode, then plug in to a copmputer. it turns on and starts in download or upload or recovery mode, but i cant get it to restart and boot
shutfu said:
i got mine to turn on by doing the downloazd mode, then plug in to a copmputer. it turns on and starts in download or upload or recovery mode, but i cant get it to restart and boot
Click to expand...
Click to collapse
Hi. How did you manage that without the power button?
Mine broke too.
Hello guys! Merry Christmas to everyone!
Please, any ideas how to get unstuck from power saving mode?
I have the 10 pro, 2213, OxygenOs 13 and I was short on battery when I decided to activate the power saving mode.
Now, my phone wont get out from this powersaving mode even though it is charged , plugged in the ac adapter or after rebooting and shutting it down.
On my notification panel, I only have a few power toggles that cannot go in the settings menu if long pressed.
There is no notification message to disable power saving mode. I'm fully charged and still the power saving mode is on.
Knock on is not working and multitask button isn't as well. Home button sometimes work and sometimes does not. I really wish to get out of this powersaving mode as I had my phone looking up only for 3G network to maximize battery plus the other annoyances mentioned....
I recorded a video to show this behaviour.
Any Ideas? thank you all!
screenshot notification panel
gtabr1 said:
Hello guys! Merry Christmas to everyone!
Please, any ideas how to get unstuck from power saving mode?
I have the 10 pro, 2213, OxygenOs 13 and I was short on battery when I decided to activate the power saving mode.
Now, my phone wont get out from this powersaving mode even though it is charged , plugged in the ac adapter or after rebooting and shutting it down.
On my notification panel, I only have a few power toggles that cannot go in the settings menu if long pressed.
There is no notification message to disable power saving mode. I'm fully charged and still the power saving mode is on.
Knock on is not working and multitask button isn't as well. Home button sometimes work and sometimes does not. I really wish to get out of this powersaving mode as I had my phone looking up only for 3G network to maximize battery plus the other annoyances mentioned....
I recorded a video to show this behaviour.
Any Ideas? thank you all
Click to expand...
Click to collapse
gtabr1 said:
Hello guys! Merry Christmas to everyone!
Please, any ideas how to get unstuck from power saving mode?
I have the 10 pro, 2213, OxygenOs 13 and I was short on battery when I decided to activate the power saving mode.
Now, my phone wont get out from this powersaving mode even though it is charged , plugged in the ac adapter or after rebooting and shutting it down.
On my notification panel, I only have a few power toggles that cannot go in the settings menu if long pressed.
There is no notification message to disable power saving mode. I'm fully charged and still the power saving mode is on.
Knock on is not working and multitask button isn't as well. Home button sometimes work and sometimes does not. I really wish to get out of this powersaving mode as I had my phone looking up only for 3G network to maximize battery plus the other annoyances mentioned....
I recorded a video to show this behaviour.
Any Ideas? thank you all!
Click to expand...
Click to collapse
Hi I noticed you just swiped down don't know if you're aware you can swipe down further and the settings icon should appear. Try that I don't own a Oneplus 10 Pro well I haven't received it yet should arrive tomorrow but I keep seeing problems with this phone I'm considering on returning it. But I think you can swipe down further at least that's what I can do on Oneplus 7T Pro. Hopefully this may help you.
slapman said:
Hi I noticed you just swiped down don't know if you're aware you can swipe down further and the settings icon should appear. Try that I don't own a Oneplus 10 Pro well I haven't received it yet should arrive tomorrow but I keep seeing problems with this phone I'm considering on returning it. But I think you can swipe down further at least that's what I can do on Oneplus 7T Pro. Hopefully this may help you.
Click to expand...
Click to collapse
HI, mate. Well, I cannot swipe further down to expand the notification panel. Anyway, the settings icon should appear at the top right portion even if you don't swipe twice.. :/
Attached is a screen shot of the notification panel while in normal condition...
I'm sorry to say, but I cannot recommend this phone. If you can get a s22u or pixel for a similar price, I'd definitely go for it. I have a long list of complaints and suggestions about software on this device.. I previously had the s10+ for a happy 3 years
Can you boot it in safe mode?
Cengiz67 said:
Can you boot it in safe mode?
Click to expand...
Click to collapse
Sorry, but how can I do it? I Googled but found out only a method that no longer works on OxygenOs 13... (shutdown menu and long pressing shutdown). Could not find it how elsewhere... Such an important information should be more easily available
Can you get to settings..? Sorry you can't just seen that in video
You can always go into fastboot... go to recovery and format...start all over
Canuck Knarf said:
Can you get to settings..? Sorry you can't just seen that in video
Click to expand...
Click to collapse
I can't... Tapping on settings icon will bring up a blank screen for a split second before closing automatically. Long pressing power toggles will say "not supported action"
Canuck Knarf said:
You can always go into fastboot... go to recovery and format...start all over
Click to expand...
Click to collapse
yeah.. But since I'm about to go out for dinner and I am going to work tomorrow morning, I really do not want to configure all apps and everything again in a rush.. If this is my only solution, I'm selling my OP this week
Press and hold the power button.
Tap and hold the "Power off" option.
Normally a new popup menu should appear on your screen that asks you to “Reboot to safe mode”. Answer “OK” at this point and let your phone reboot in Safe Mode.
Cengiz67 said:
Press and hold the power button.
Tap and hold the "Power off" option.
Normally a new popup menu should appear on your screen that asks you to “Reboot to safe mode”. Answer “OK” at this point and let your phone reboot in Safe Mode.
Click to expand...
Click to collapse
The new OOS 13 shutdown sliding menu doesn't do anything when pressing the shutdown option :/
gtabr1 said:
The new OOS 13 shutdown sliding menu doesn't do anything when pressing the shutdown option :/
Click to expand...
Click to collapse
Maybe this might work. When you swipe down tap on battery icon and it should take you to battery settings, again I don't have your phone but it wouldn't hurt to try.
Deleted
Deleted
Wipe cache is not working? On recovery
Cengiz67 said:
Wipe cache is not working? On recovery
Click to expand...
Click to collapse
Dont you mean format..?
slapman said:
Maybe this might work. When you swipe down tap on battery icon and it should take you to battery settings, again I don't have your phone but it wouldn't hurt to try.
Click to expand...
Click to collapse
I did try this on the video, but as shown, I was granted a "not supported" message :/
Cengiz67 said:
Wipe cache is not working? On recovery
Click to expand...
Click to collapse
I tried getting to recovery, but got a Recovery written in chinese....... ( wasnt the 2213 supposed to be global or european model?). Anyway, I translated the options and there was only Format Data, Reboot and Shutdown.
Canuck Knarf said:
Dont you mean format..?
Click to expand...
Click to collapse
It would be the best, but really couldn't get to format my phone on such busy days
Update!
I was able to boot on safe mode. Then, my phone presented me correctly the Super Power Saving Screen and I was able to disable it!
Safe mode steps on OOS13:
Once your device has been powered off, long press the power button to turn it back on and wait till you see the device manufacturer or the Android logo.
Once you see the logo, press and hold the volume down button until your device reboots.
Release the power button once your device has rebooted and you will now be entered into the safe mode.
Click to expand...
Click to collapse
What happened:
Saturday 24th I activated the power saving mode when I was 5%. The phone died and later when I turned it on, it was on SUPER POWER SAVING MODE without being on the "Super power saving launcher". Instead, somehow it was on my NOVA LAUNCHER while being on super power saving mode, as shown on the video...... So I was not able to disable it or access any configuration. My phone was on Do not disturb, good night mode, 3G network locked...
I tried booting to safe mode, but instead I got to a Recovery screen written in chinese ( isn't this phone supposed to be global or European? model 2213) a few times.
This bug was seriously weird and should be investigated by oneplus. Such thing cannot happen!
Thank you all for your time and your help! Very much appreciated!
gtabr1 said:
Update!
I was able to boot on safe mode. Then, my phone presented me correctly the Super Power Saving Screen and I was able to disable it!
Safe mode steps on OOS13:
View attachment 5794247
What happened:
Saturday 24th I activated the power saving mode when I was 5%. The phone died and later when I turned it on, it was on SUPER POWER SAVING MODE without being on the "Super power saving launcher". Instead, somehow it was on my NOVA LAUNCHER while being on super power saving mode, as shown on the video...... So I was not able to disable it or access any configuration. My phone was on Do not disturb, good night mode, 3G network locked...
I tried booting to safe mode, but instead I got to a Recovery screen written in chinese ( isn't this phone supposed to be global or European? model 2213) a few times.
View attachment 5794251
This bug was seriously weird and should be investigated by oneplus. Such thing cannot happen!
Thank you all for your time and your help! Very much appreciated!
Click to expand...
Click to collapse
Deleted.