Once you have twrp recovery you are not able to apply new update roms, except if you can put back the original recovery.img through fastboot command.
Only for ASUS ZC554KL !!
You can take it from here.
https://drive.google.com/open?id=1i1bc7-TLIf0T9fY77ItahNoNlSri1St3
File is zipped, unzip before flashing it
XDA:DevDB Information
original Recovery.img ZC554KL, ROM for the Asus ZenFone 4 Max
Contributors
holowmanx
ROM OS Version: 7.x Nougat
Version Information
Status: Stable
Created 2018-04-08
Last Updated 2018-04-08
holowmanx said:
Once you have twrp recovery you are not able to apply new update roms, except if you can put back the original recovery.img through fastboot command.
Only for ASUS ZC554KL !!
You can take it from here.
https://drive.google.com/open?id=1i1bc7-TLIf0T9fY77ItahNoNlSri1St3
File is zipped, unzip before flashing it
XDA:DevDB Information
original Recovery.img ZC554KL, ROM for the Asus ZenFone 4 Max
Contributors
holowmanx
ROM OS Version: 7.x Nougat
Version Information
Status: Stable
Created 2018-04-08
Last Updated 2018-04-08
Click to expand...
Click to collapse
it is not stock. it is twrp 3.1.1
It is TWRP, it is not the stock recovery
this is TWRP
never can install any official update, like all other TWRP version
here is stock I had posted
https://forum.xda-developers.com/ze...k-recovery-t3793133/post76575366#post76575366
Related
Okay I need quick help I have cm11 runing with cwm 6.0.4.6.. I want to flash Android Revolution HD 62.. I was wondering can i use my cwm or do I need to install twrp 2.6.3.3? By the way its international HTC One.
Use TWRP
Use TWRP.
CWM will cause bootloops.
QUOTE (End 1st post)
XDAevDB Information
[ROM] Android Revolution HD 62.0 | High Quality & Performance | Android 4.4.2 KitKat | HTC Sense 6.0 | 1.54.401.5 | Tweaks app - Sense 6 Toolbox Alpha | Sprint Support | T-Mobile Wi-Fi Calling, a ROM for the HTC One
Contributors
mike1986., langer hans, Mikanoshi
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP 2.6.3.3 recovery or newer
Based On: HTC RUU
manish_ram378 said:
Use TWRP.
CWM will cause bootloops.
QUOTE (End 1st post)
XDAevDB Information
[ROM] Android Revolution HD 62.0 | High Quality & Performance | Android 4.4.2 KitKat | HTC Sense 6.0 | 1.54.401.5 | Tweaks app - Sense 6 Toolbox Alpha | Sprint Support | T-Mobile Wi-Fi Calling, a ROM for the HTC One
Contributors
mike1986., langer hans, Mikanoshi
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP 2.6.3.3 recovery or newer
Based On: HTC RUU
Click to expand...
Click to collapse
Okay to flash TWRP I just need to download TWRP 2.6.3.3 then put it in platform tools folder than go to fastboot and run in command prompt this command fastboot flash recovery and then type the name like this openrecovery-twrp-2.6.3.3-m7.img..
And also can I skip installation of firmware.zip?
Prism Gap Fix
when i attempt to flash the prism_gap_fix.zip in twrp 2.6.3.3, after swiping to flash, my phone reboots without installing the zip file.
I've tried on twrp 2.7 too with same results, any fix for this?
lightyagami11 said:
And also can I skip installation of firmware.zip?
Click to expand...
Click to collapse
lightyagami11 said:
Okay to flash TWRP I just need to download TWRP 2.6.3.3 then put it in platform tools folder than go to fastboot and run in command prompt this command fastboot flash recovery and then type the name like this openrecovery-twrp-2.6.3.3-m7.img..
Click to expand...
Click to collapse
I dumped CWM, due to reboots, and installed TWRP 2.6.3.3 via flashify from playstore. I also skipped installation of firmware zip, came from stock rooted
T-Mobile G6 H872 11H Stock Collection
Based on OEM 11h KDZ. Extracted and Repacked.
DISCLAIMER
Proceed at your own risk. I am not responsible for any damage to your device.
Stock 20a System Firmware will not work with 11g or 11h Bootloaders
11H Firmware is ARB01
Flashing LAF WILL REMOVE TWRP from your laf partition and restore stock DL Mode
FILE BREAKDOWN
The following Zips DO NOT include stock LAF.
You must flash the provided LAF separately if you wish to go back to stock DL mode
Bootloader: 11h Stock Bootloader ONLY
SysBoot: 11h Boot and System ONLY (Modem, Bootloader not included). These zips are adb sideload compatible.
FullStock: Full 11h Firmware Installation
StockLAF: Individual LAF image for returning to stock DL mode
TWRPLAF: Individual LAF image for replacing stock DL mode with TWRP
Magisk: You know. You must flash this after flashing any of the above packages if you want to stay rooted.
INSTRUCTIONS
Make a FULL TWRP Backup using 3.2.3. Link to thread is below.
Boot to TWRP and do a Format Data
Reboot back to TWRP on Recovery to allow TWRP to mount System properly.
Do an Advanced Wipe - System, Data, Cache and Dalvik
Flash your chosen Zip using TWRP
You must have TWRP on recovery to flash LAF images.
It is recommended that Sysboot Images be flashed AFTER Bootloader or FullStock
If you flash the SysBoot rom with Kernel patch and Root you are good to go, otherwise flash Magisk to maintain root access.
Wipe Cache/Dalvik
Reboot to system.
Your phone may reboot once or twice during the initial boot to system. This is normal.
Your phone may hang a while on the boot logo. This is also normal. If hang persists for too long, hold vol-down+power until phone powers off to reboot.
DOWNLOADS
Stable v1.0
Project Files have been moved to SourceForge
TWRP 3.2.3 for H872 by @Eliminator74 - Thank you for all the work you have done for the G6!
Magisk + Magisk Manager
Bootloader - md5:1c168cff641f8609b3ee0d235d232028
SysBoot ROM - md5:f3bb40d933fdb11cdf3e7c18b91f0ec3
SysBoot Deodexed - md5:f45b6325326234a61ebcb012febdb1a8
SysBoot w/Patched Kernel + Magisk Root - md5:170ef77a503c4c3b36eb39150ca7a2d9
FullStock ROM - md5:667066e2eff9d1fd1c5b895c40950733
StockLAF - md5:4f2f2318005231f65a4ebdc36b6434c9
TWRPLAF - md5:f8ea4e93dc417d2d31f5cb8b77530bfa
These files are long overdue. I hope you all find them helpful. Please let me know if you run into any problems with them. Thanks!
Other H872 Projects
H872 11G Stock Collection
H872 20A SysBoot ROMs (OEM and Rooted)
Announcement
I have officially moved to the V30 and no longer own the G6.
I will still be active in this community, but since I don't have the device any longer I will not be able to test any packages or issues that might arise.
All of my current projects have been tested. If anybody runs into problems, you can still let me know and I'll do my best to support my stock packages.
Thanks guys!
-weakNPCdotCom
XDA:DevDB Information
[STOCK] h87211h, ROM for the T-Mobile LG G6
Contributors
weakNPCdotCom
Source Code: https://sourceforge.net/projects/t-mobile-g6-firmware/files/h872/11h/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.2.3
Based On: 11h KDZ
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2018-10-05
Created 2018-10-05
Last Updated 2018-10-19
All 11h Files Up
UPDATE
All Files are done and available now for 11h
Added Today:
SysBoot ROM
SysBoot Deodexed
SysBoot w/Patched Kernel + Magisk Root
Enjoy!
Is full stoc.zip include recovery or laf ? I mean flashing full stock will not remove twrp or twrplaf ?
I was on 11g I made full backup from twrp... Then I flashed 20g for testing .. 20g flashed successefully but it was too laggy ... Then I restored my backup of 11g it restored succefully but fingerprint did not work ... After that I wiped everything and flashed 11g bootloder ,restored backup and flashed magisk and ended up with a bootloop....
Now I am on pixelexperience 9.0 ...
Now I want my 11g+data(apps) backup to restore ...
Plz help me
I hope you understood sorry for bad English
YOU ARE NOT ALLOWED TO USE ANY PART OF THIS ROM WITHOUT MY PERMISSION
Attention
The rom and the bootloader provided in this topic and to be used in a device where the Bootloader Binary has been changed to 3, devices where the binary has not been altered that is in Binary 1 or 2, it is not necessary to use these files to Downgrade. If you use and come, there is an error such as: Loss of IMEI, Battery Bug, Super Heating, Boot Random. I am not responsible for any errors caused by user error or misuse.
Instruction:
1º Download the most recent version of Odin or it can be the version also v3.10.
2nd Download the files needed to downgrade.
3º Open Odin, and in the AP put the file with the name (bootloaderDowngrade.tar) of the start to start the procedure. The unit will restart by itself. Go back in download mode again and in AP put the file (DowngradeMM6.0.1Binario.tar) of the start again leaves until the device restarts normally.
Note: The first start of it may take 5 to 10 minutes.
4º After the procedure is finished, the phone will restart with ROM STOCK MM 6.0.1, NO ROOT and NO MODIFICATION (ROM IS FACTORY). However this procedure did not allow updating by OTA, because in this procedure the Binary will still continue with B3 and file is with binary combination. But when installing any other ROM STOCK when passing them on ODIN, just do not put the Bootloader of 7.0 or 8.1.0 in the BL option. Only use the stock files as standard AP, CP and CSC.
Download:
bootloaderdowngrade.tar
downgradeMM6.0.1binario.tar
Donation:
Click Here
XDA:DevDB Information
STOCK MM 6.0.1 , ROM for the Samsung Galaxy J7
Contributors
darkfalling
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Stable Release Date: 2018-11-07
Created 2018-11-07
Last Updated 2018-11-06
Knox warranty void 0x1 how to 0x0 problem?
I need to be root in its version, help please
pls help i am trying to install Havoc-OS rom on g611f but get boot loop and when install stock oreo firmware on odin it's field
Buddy, does it still work on stock 8.1 with binary 4?
compatible with g610f/ds?
kingbrazile said:
pls help i am trying to install Havoc-OS rom on g611f but get boot loop and when install stock oreo firmware on odin it's field
Click to expand...
Click to collapse
You nedd to flash kernel to boot havoc os
Cashy short links are internet's ultimate garbage even trolls are better
bootloaderdowngrade.tar https://drive.google.com/file/d/1YwF4iu-LH2u6yopY_7WNXiGAI4TKOORl/view
downgradeMMbinario.tar https://drive.google.com/file/d/1ioVLpbAGI1Ptm6xvpyFmFH1C8IAumIJR/view
can i downgrade my on nxt 64 gb with this
sir, am currently using android 8.1 os in my galaxy on nxt 64 gb model. i would like to downgrade my phone to its marshmallow firmware. can i downgrade my phone with this thread?. is the firmware is same for on nxt and j7 prime?
YOU ARE NOT ALLOWED TO USE ANY PART OF THIS ROM WITHOUT MY PERMISSION
Attention
The rom and the bootloader provided in this topic and to be used in a device where the Bootloader Binary has been changed to 3, devices where the binary has not been altered that is in Binary 1 or 2, it is not necessary to use these files to Downgrade. If you use and come, there is an error such as: Loss of IMEI, Battery Bug, Super Heating, Boot Random. I am not responsible for any errors caused by user error or misuse.
Instruction:
1º Download the most recent version of Odin or it can be the version also v3.10.
2nd Download the files needed to downgrade.
3º Open Odin, and in the AP put the file with the name (bootloaderDowngrade.tar) of the start to start the procedure. The unit will restart by itself. Go back in download mode again and in AP put the file (DowngradeMM6.0.1Binario.tar) of the start again leaves until the device restarts normally.
Note: The first start of it may take 5 to 10 minutes.
4º After the procedure is finished, the phone will restart with ROM STOCK MM 6.0.1, NO ROOT and NO MODIFICATION (ROM IS FACTORY). However this procedure did not allow updating by OTA, because in this procedure the Binary will still continue with B3 and file is with binary combination. But when installing any other ROM STOCK when passing them on ODIN, just do not put the Bootloader of 7.0 or 8.1.0 in the BL option. Only use the stock files as standard AP, CP and CSC.
Download:
bootloaderdowngrade.tar
downgradeMM6.0.1binario.tar
Donation:
Click Here
XDA:DevDB Information
STOCK MM 6.0.1 , ROM for the Samsung Galaxy J7
Contributors
darkfalling
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Stable Release Date: 2018-11-07
Created 2018-11-07
Last Updated 2018-11-06
please tell will work on sm g610 s l k version korean variants which are on 8.1.0 u2 CSB1
FOR binary 8 to binary 1 and/or install firmware marshmallow? pls
Lineage 15.1 for Xperia XZ
Based on SODP
By Sjll
This is a stable and performance version
Download Link: AndroidFileHost
Choose the file named "kagura"
OEM download : Link
How to flash:
1. Wipe Data and flash in twrp
2. Flash oem with SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone.zip
3. Boot and Enjoy.
Feature: Performance, Stable, Gcam support.
Gcam recommend: MGC_6.1.009_MI8_A8.1+_V0_2.apk
For dual model
Add this in build.prop
Code:
persist.multisim.config=dsds
persist.radio.multisim.config=dsds
ro.telephony.default_network=9,1
Source code: Github
XDA:DevDB Information
Lineage 15.1 for the Sony Xperia XZ
Contributors
Sjll
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Created 2020-03-26
Last Updated 2020-3-26
2. Flash oem in SW
Hello
I am brand new here so I am not sure if I should post a question here or some place else? I started working on installing Lineage OS to my Xperia XZ about 10 days ago with no results. Than I found this thread today after installing Lineage OS on Realme 3 Pro.
Can you explain to me what I am suppose to do here?
2. Flash oem in SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .zip
Kind Regards
T
toxypoxy said:
Hello
I am brand new here so I am not sure if I should post a question here or some place else? I started working on installing Lineage OS to my Xperia XZ about 10 days ago with no results. Than I found this thread today after installing Lineage OS on Realme 3 Pro.
Can you explain to me what I am suppose to do here?
2. Flash oem in SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .zip
Kind Regards
T
Click to expand...
Click to collapse
1. Backup all your staff.
2. Unlock Bootloader on Sony Xperia XZ
3. fastboot flash recovery twrp-kagura-oem-to-vendor.img---------> https://sx.ix5.org/files/builds/kagura/misc/twrp-kagura-oem-to-vendor.img ....Use this TWRP , it will solve your " Failed to mount ´/oem´ " problem!
4. fastboot flash oem SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .img
5. In TWRP --> flash --->zip rom.
6. reboot.
7. Optional (you can install Magisk https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-v20.4.zip) to uninstall Magisk --> https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-uninstaller-20200323.zip
İf you have never done such thing before! Research for more info.
Thanks to Sjll.
toxypoxy said:
Hello
I am brand new here so I am not sure if I should post a question here or some place else? I started working on installing Lineage OS to my Xperia XZ about 10 days ago with no results. Than I found this thread today after installing Lineage OS on Realme 3 Pro.
Can you explain to me what I am suppose to do here?
2. Flash oem in SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .zip
Kind Regards
T
Click to expand...
Click to collapse
elm_bacchus said:
1. Backup all your staff.
2. Unlock Bootloader on Sony Xperia XZ
3. fastboot flash recovery twrp-3.3.1-0-kagura.img
4. fastboot flash oem SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .zip
5. In TWRP --> flash --->zip rom.
6. reboot.
7. İf you have never done such thing before! Research for more info.
Click to expand...
Click to collapse
Unzip it,you need to flash IMG in this zip file.
Sjll said:
Lineage 15.1 for Xperia XZ
Based on SODPBy Sjll
This is a stable and performance version
Download Link: AndroidFileHost
Choose the file named "kagura"
OEM download : Link
How to flash:
1. Wipe Data and flash in twrp
2. Flash oem with SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone.zip
3. Boot and Enjoy.
Feature: Performance, Stable, Gcam support.
Source code: Github
XDA:DevDB Information
Lineage 15.1 for the Sony Xperia XZ
Contributors
Sjll
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Created 2020-03-26
Last Updated 2020-3-26
Click to expand...
Click to collapse
Good project can you up until lineages 16.0 for XZ?
Do I have to first install Oreo base firmware ROM. Latest .192?
Working on it
Sjll said:
Unzip it,you need to flash IMG in this zip file.
Click to expand...
Click to collapse
Hello and thank you and elm_bacchus for quick reply
So this is the status:
1. Backup all your staff. FINISHED
2. Unlock Bootloader on Sony Xperia XZ FINISHED
3. fastboot flash recovery twrp-3.3.1-0-kagura.img FINISHED
4. fastboot flash oem SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .zip FINISHED But after I did this I always get this message in TWRP : Failed to mount ´/oem´ (Invalid argument) in red letters. TWRP still continues to work but always this message. :silly:
5. In TWRP --> flash --->zip rom. I am assuming this is the file I should Unzip? And flash IMG in TWRP? or ...
6. reboot. Seen SONY logo enough times for today :laugh:
7. İf you have never done such thing before! Research for more info.
---End Quote---
Unzip it,you need to flash IMG in this zip file
Thanks
T
delete
wich gapps is recomended? or there is a specific one that works?
caqo71 said:
Do I have to first install Oreo base firmware ROM. Latest .192?
Click to expand...
Click to collapse
Yup.
seyrarms said:
Good project can you up until lineages 16.0 for XZ?
Click to expand...
Click to collapse
Need time.
toxypoxy said:
Hello and thank you and elm_bacchus for quick reply
So this is the status:
1. Backup all your staff. FINISHED
2. Unlock Bootloader on Sony Xperia XZ FINISHED
3. fastboot flash recovery twrp-3.3.1-0-kagura.img FINISHED
4. fastboot flash oem SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .zip FINISHED But after I did this I always get this message in TWRP : Failed to mount ´/oem´ (Invalid argument) in red letters. TWRP still continues to work but always this message. :silly:
5. In TWRP --> flash --->zip rom. I am assuming this is the file I should Unzip? And flash IMG in TWRP? or ...
6. reboot. Seen SONY logo enough times for today :laugh:
7. İf you have never done such thing before! Research for more info.
---End Quote---
Unzip it,you need to flash IMG in this zip file
Thanks
T
Click to expand...
Click to collapse
You need to upgrade to latest Oreo FW, the flash oem.img via fastboot or twrp, format data, flash lineage zip in twrp.
Sjll said:
Yup.
Need time.
You need to upgrade to latest Oreo FW, the flash oem.img via fastboot or twrp, format data, flash lineage zip in twrp.
Click to expand...
Click to collapse
Thanks you my hope
SONY Xperia XZ
Quote:
Originally Posted by Sjll
You need to upgrade to latest Oreo FW, the flash oem.img via fastboot or twrp, format data, flash lineage zip in twrp.[/QUOTE]
Thank you and elm_bacchus again for the help
Well well this all went well, most of my time went in to trying to flash the wrong TWRP for XZ but after that, it worked in my second attempt :good:
After flashing the SW binaries and format data I got this message again in TWRP : Failed to mount ´/oem in red letters. But I just continued flashing the ROM in TWRP and it worked like a charm.
Kind regards
T
@Sjll:
It seems that this build doesn't support ExFat on External SDCards, am I right ?
And:
What TWRP-Version do you recommend ? The lastest offical 3.3.1-0 doesn't mount /data, so every time I enter TWRP I have to format data ...
Thanks for this. I followed the instructions and it worked.
I forgot that my SDcard was encrypted and lost my photos but hey ho.
@Sjll is there a git repository for this ROM ?
2faraway2 said:
@Sjll:
It seems that this build doesn't support ExFat on External SDCards, am I right ?
And:
What TWRP-Version do you recommend ? The lastest offical 3.3.1-0 doesn't mount /data, so every time I enter TWRP I have to format data ...
Click to expand...
Click to collapse
Hello
I used twrp-3.3.1-0-kagura and it worked for me.
Regards
T
How about front camera? Does it work properly?
dawidcx3 said:
How about front camera? Does it work properly?
Click to expand...
Click to collapse
It works for me on the F8331 device.
XZs build (keyaki)?
By chance is there a choice for 15.1 for Keyaki? It is stated to choose Kagura, are there other choices for the XZ variants? Would like to update to 8.1, 9, or 10 binaries and read the build instructions from source for Lineage but am wondering if all I need are the kernel binaries to complie Lineage (15.1, 16, 17, 17.1) for the XZS. There is practically nothing for the XZS and it would be helpful to know how to provide other roms for it as well. Any assistance will be greatly appreciated.
Does anyone know what the latest Android security update supported is on this ROM?
Some bugs
Hello, I've been using as my daily for a week now and I've noticed some bugs
1) the camera works but it's bad not even close to stock. The picture is dark and dim.
2) sometimes the wifi doesn't open or close no matter how much you try only restarting the phone helps.
3)sometimes the phone doesn't charge even when it's showing charging.
I hope these bugs can be solved asap because I love this rom its stable, smooth and fast with good battery life. Thanks.