Database Develop

[Q] Brick Challenge lvl hard - Milestone stucks on bootload

Whats up cheers!
After try flash a droid kernel, my milestone stucks on the bootload on this err:A5,69,4E,00,23 (version 90.78). But, i can access the normal bootload with no error, pressing UP when the phone starts.
The RSDLite recognise my device, but without any informations (before it, when I had flashed the vunerable recovery, a lot of infos, like the OMAP platform appears on the screen).
I can access the recovery screen, but without the menu, just the /!\ image (my device don't work with VolUp+Cam [the buttons work perfectly on the android], to install my CM7 custom rom i had to instal some scripts on the stock rom, but the device don't starts anymore, so i can't install any script).
So, I think, if I can open the recovery menu and re-install the cm7 my brick will be back, but HOW? Exists a mod to work this way?
Sorry for my bad english, i'm brazilian.

Notord said:
Whats up cheers!
After try flash a droid kernel, my milestone stucks on the bootload on this err:A5,69,4E,00,23 (version 90.78). But, i can access the normal bootload with no error, pressing UP when the phone starts.
The RSDLite recognise my device, but without any informations (before it, when I had flashed the vunerable recovery, a lot of infos, like the OMAP platform appears on the screen).
I can access the recovery screen, but without the menu, just the /!\ image (my device don't work with VolUp+Cam [the buttons work perfectly on the android], to install my CM7 custom rom i had to instal some scripts on the stock rom, but the device don't starts anymore, so i can't install any script).
So, I think, if I can open the recovery menu and re-install the cm7 my brick will be back, but HOW? Exists a mod to work this way?
Sorry for my bad english, i'm brazilian.
Click to expand...
Click to collapse
As long as RSDlite sees the device, you should be able to SBF back to stock. Once you are back to stock you can go through the root process again, install Open Recovery, and then you will be able to restore your nandroid backup.
Another option is, and I don't know anything about the Open Recovery for Milestones, but some custom recoveries have a way of cold booting straight into the recovery. If you can find out how to do that then you are golden, if not then you will have to SBF.

catawalks said:
As long as RSDlite sees the device, you should be able to SBF back to stock. Once you are back to stock you can go through the root process again, install Open Recovery, and then you will be able to restore your nandroid backup.
Another option is, and I don't know anything about the Open Recovery for Milestones, but some custom recoveries have a way of cold booting straight into the recovery. If you can find out how to do that then you are golden, if not then you will have to SBF.
Click to expand...
Click to collapse
I'm downloading the sbf right now!
But I will wait you find the another way to start the OR before flash the sbf.

Notord said:
I'm downloading the sbf right now!
But I will wait you find the another way to start the OR before flash the sbf.
Click to expand...
Click to collapse
Try these two things, if they don't work then I think you are stuck with SBFing.
From phone off state - Hold Power+X. When you get to the triangle with !, try either VolUp+VolDown or VolUp+Camera. If you don't get into the recovery that way, try:
From phone off state - Hold Power+Camera. If that gets you to a triangle with ! then try the same key combinations from above.
If neither of those work for you, then SBF your phone and start over. If you get bootloops after SBFing, boot into the stock recovery with Power+X and wipe data/factory reset.

catawalks said:
Try these two things, if they don't work then I think you are stuck with SBFing.
From phone off state - Hold Power+X. When you get to the triangle with !, try either VolUp+VolDown or VolUp+Camera. If you don't get into the recovery that way, try:
From phone off state - Hold Power+Camera. If that gets you to a triangle with ! then try the same key combinations from above.
If neither of those work for you, then SBF your phone and start over. If you get bootloops after SBFing, boot into the stock recovery with Power+X and wipe data/factory reset.
Click to expand...
Click to collapse
I had downloaded the Brazi Retail one on this link: sbf.droid-developers(dot)org/umts_sholes/list.php (I can't link before 10 posts, change the (dot))
But, before the flash, i saw a problem: The A853 SBF is only for Canada, the rest, i think, may be for the Droid, and not for the Milestone.
Please, help me one more time! How version I need?

Notord said:
I had downloaded the Brazi Retail one on this link: sbf.droid-developers(dot)org/umts_sholes/list.php (I can't link before 10 posts, change the (dot))
But, before the flash, i saw a problem: The A853 SBF is only for Canada, the rest, i think, may be for the Droid, and not for the Milestone.
Please, help me one more time! How version I need?
Click to expand...
Click to collapse
All of those should be for the Milestone. Any of the Brazilian ones should work for you, they are most likely just different versions of the OS. If you press back in the upper left hand corner of that page it shows that the Droid (A854,A855) has it's own download area. All the Brazilian ones seem to be the SHLA SBF's and I believe that is what you are looking for.

catawalks said:
All of those should be for the Milestone. Any of the Brazilian ones should work for you, they are most likely just different versions of the OS. If you press back in the upper left hand corner of that page it shows that the Droid (A854,A855) has it's own download area. All the Brazilian ones seem to be the SHLA SBF's and I believe that is what you are looking for.
Click to expand...
Click to collapse
I did it, but the RSD fail on this screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What I need to do now? I'm bricked at all?
Please, call your friends to help me too.

Notord said:
I did it, but the RSD fail on this screen:
What I need to do now? I'm bricked at all?
Please, call your friends to help me too.
Click to expand...
Click to collapse
haha, not sure I've been on here long enough to have friends to call upon. I'll go through that list again tomorrow and see if I can figure out what went wrong.

Are you running RSDLite as Administrator? If that is not the issue, try to shorten the path and filename (you have a space in your path? (M MS)). You could also try to use earlier versions of RSD, I used 4.9 with no problems (mostly).

mrvek said:
Are you running RSDLite as Administrator? If that is not the issue, try to shorten the path and filename (you have a space in your path? (M MS)). You could also try to use earlier versions of RSD, I used 4.9 with no problems (mostly).
Click to expand...
Click to collapse
Don't work...
I will try flash with ubuntu.
brb

I'm still bricked, ubuntu results:
Normal sbf flash mode
-f sbf flash mode (force)

GREAT NEWS!!!
The device is back to life!
I had flashed this sbf: SHLA_U2_05.14.0_SIGNED_USASHLSMR1RETBRLA038.0R_PDS002_USASHLSMR1RETBRLA_P010_A008_M002_HWp2a_WIG145942_Service1FF.sbf
The file can be found here: sbf.droid-developers . org/umts_sholes/list.php is a retail brazilian version (about 116 mb)
RSD Lite version used: 5.6 (without adm permitions)
OS: Win 7
The file has renamed as stck.sbf and putted on the C:\ root directory
Thanks for everybody. And now, I wanna help the people with the same problem as me, so, any questions about this process you can ask me by PM.

Great news. Glad to hear you are up and running. Welcome back.
Sent from my MB870 using xda app-developers app

[Q] [I9001] SGS+ bricked/broken

Hey guys,
I own a SGS+ and tried to flash a ROM a few month ago.
Not sure which one it was in particular but it was a 4.1.2 ROM.
Normally it worked pretty well but that time it broke my phone apparently.
So now a few month later I tried to get it to work again.
My phone stucks at the splashscreen, easy said.
It boots till the splash screen and then it's on for about 3-4 minutes I guess and then the screen turns off.
But apparently it still runs because if I try to start it again over the power button it doesn't work.
I have to remove the battery, insert it again and then I can use the power button.
I tried several things and I'm out of information here.
So maybe one of you guys can help me out here?
Thanks for reading!

Try wiping cache an dalvik cache and fix permissions. If that doesn't help do a full wipe and install a new rom. If it still doesn't work, flash a stock rom via odin. Also, which recovery are you using?
Sent from my GT-I9001 using xda app-developers app

Already did everything you mentioned, multiple times.
Well I used at first CWM 6.0.1.2 then switched to 6.0.2.8, then 6.0.3.2, then 6.0.3.6 and then TWRP 2.4.0.0 and TWRP 2.6.0.0.
I tried those who should be for the bricked phones.

Try to flash a new kernel, then flash a new ROM. You should be able to get into download mode...
Click to expand...
Click to collapse
..

That's not the problem.
I can get into download mode, I could get into download mode all the time.
I don't think you got my problem right:
My phone stucks at the splash screen.
Doesn't turn off only screen turns off but the phone is still running.
I can only reboot if I take the battery out.
So it boots up to the splashscreen and stucks.
I flashed a few new roms and nothing worked.

If you can get into download mode, try flahing a stock rom via odin.
Sent from my GT-I9001 using xda app-developers app

NintendoLink07 said:
That's not the problem.
I can get into download mode, I could get into download mode all the time.
I don't think you got my problem right:
My phone stucks at the splash screen.
Doesn't turn off only screen turns off but the phone is still running.
I can only reboot if I take the battery out.
So it boots up to the splashscreen and stucks.
I flashed a few new roms and nothing worked.
Click to expand...
Click to collapse
1.Remove your battery.
2.Reinsert battery.
3.Put in download mode.
4.Flash stock rom.
5.Profit!
Sent from my Nexus 4 using xda app-developers app

I tried that one too, no success.
The phone still stucks in the splashscreen, nothing changed.

NintendoLink07 said:
I tried that one too, no success.
The phone still stucks in the splashscreen, nothing changed.
Click to expand...
Click to collapse
Download BroodRom(Not ics or jb just the old GB edition) it's a lifesaver.
1.Go to recovery.
2.Format EVERYTHING(data, cache, dalvik AND system.)
3.Download mode
4.Flash broodrom with Odin.
That should work!
Sent from my Nexus 4 using xda app-developers app

Not really, still the same.
My phone still stucks in splashscreen.

Does nobody else know a solution?
I can flash normal, go to download mode easily and everything else too.
It just stucks in the splashscreen.

Follow my tutorial about how to flash back to stock. See here: http://forum.xda-developers.com/showpost.php?p=44047896&postcount=2

NintendoLink07 said:
Does nobody else know a solution?
I can flash normal, go to download mode easily and everything else too.
It just stucks in the splashscreen.
Click to expand...
Click to collapse
Maybe you didn't flash appropriate ROM for your device. Read this thread, especially the first post by our forum mate xsensman and try to check if it could be concerning also your device:
http://forum.xda-developers.com/showthread.php?t=1890667

Even through I know how to flash, I tried the two links from the guys above and tried them.
Again nothing happened either.
Flashing was okay, everything was fine.
Unfortunately the phone still stucks in splashscreen.
No one else knows what I could do?

verify serial No
NintendoLink07 said:
...Flashing was okay, everything was fine.Unfortunately the phone still stucks in splashscreen.
Click to expand...
Click to collapse
Mate, something is strange there. With splashscreen you mean bootloop, right? So you see the logo, but the phone doesn't really loads the Android?
OK, here we go: please remove the battery and write down your serial No and google a bit is it really i9001? There are about 20 different types of SGS so just to make sure which model do you have.
That bootloop can happen for several reasons, but I would assume that in your case it happens either for:
bootloader isn't working properly
you haven't flashed the proper ROM for your device.
I suspect very strongly the bootloader, so re-flashing the bootloader via Odin, theoretically, should revive your phone. Just check (as written above) do you REALLY have i9001, (as otherwise -if not- you could brick it with the bootloader for i9001):
First post, "5. Follow the instruction" (all files there)
http://forum.xda-developers.com/showthread.php?p=32144697

I'm 100% sure that I have a real i9001, not a special edition or something like that.
And I flashed before it got broken a few month and the roms worked just fine.
Well but then it broke somehow.
I just see that my phone with the CWM-Recovery can't format /data and hangs.
Can't do anything unless I remove the battery and boot up again.
Could this be a hint for you guys?

NintendoLink07 said:
....
Click to expand...
Click to collapse
Did you flash the bootloader as I've wrote you in my previous post?

NintendoLink07 said:
I'm 100% sure that I have a real i9001, not a special edition or something like that.
And I flashed before it got broken a few month and the roms worked just fine.
Well but then it broke somehow.
I just see that my phone with the CWM-Recovery can't format /data and hangs.
Can't do anything unless I remove the battery and boot up again.
Could this be a hint for you guys?
Click to expand...
Click to collapse
I have no idea what may that be, but are you sure your phone is bricked?
Have you tried to use normal TWRP 2.6 instead of that one for bricked phones?
I don't know, but maybe this helps:
Guide: How to Recover from a bootloop http://forum.xda-developers.com/showthread.php?t=1660596

@tetakpatak: Yes, I did it like the post "suggested".
@3L4CK_5C0RP10N: No, I'm actually not sure, that's why I wrote "bricked/broken".
I'm not the best guy at those things as you can guess.
No, I didn't tried the normal one, gonna try it now, atleast it's worth trying.
I read the post you linked me here and tried those things, unfortunately nothing happened.
Even tried it with ADB, also no solution found there.
But thanks already for the work guys!

suggest you try the following:-
1) power it down, remove battery, remove SIM card and Ext SD card and press and hold your power button for at least 30 seconds to a min, before reinserting battery and entering CWM recovery
2) In CWM recovery, enter Mounts and Storage and Format every partition, that can be formatted, repeat it twice ( You will lose all your data ) meaning you will be trying to get a clean environment for a fresh start. Do not reboot but pull out battery, press power for a few seconds and insert battery.
If you need your data, in mounts and storage, enter usb storage, here with usb connected to PC you can copy your entiere internal SDcard to PC, for salvage later.
3) get into Download mode, to flash the oldest i9000 Stock ROM 2.3.3 with AriesVe.ops using Odin 4.43 ( with ops ticked) How to flash follow this
download ROM from here
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​

[SOLVED] [Q] Need stock Modempack

Hi,
ive flashed the stocky rom with its modem pack. I changed to Super WizCyan ROM and my WLAN doesnt work, so I need the stock modem pack again.
Can someone upload it for me?
Kind regards

dentero said:
Hi,
ive flashed the stocky rom with its modem pack. I changed to Super WizCyan ROM and my WLAN doesnt work, so I need the stock modem pack again.
Can someone upload it for me?
Kind regards
Click to expand...
Click to collapse
Which modem are you on and which one are you looking for? Wifi works fine with NE5 modem.
Yesterday, I have added another couple of modems with wifi fixes, you can look below flashing instructions in th OP.

Great! NE5 works fine :good: Thanks a lot!

Where can I find the basebands as well as modems?
mine does not match, and therefor my in call sound screws around.
I've read and searched and found solutions, but can't find the source of files
I'm currently on bootloader XXUAMI3 and basebandXXUCNH2
running CM12

nasaprinsloo said:
Where can I find the basebands as well as modems?
mine does not match, and therefor my in call sound screws around.
I've read and searched and found solutions, but can't find the source of files
I'm currently on bootloader XXUAMI3 and basebandXXUCNH2
running CM12
Click to expand...
Click to collapse
Baseband is the term used for modem in the about phone in settings.
You seem to be on the old bootloader and may have to upgrade to 4.4.2 to solve the in call issue

Do you know where I can find the bootloaders? Or is it included in the roms?

nasaprinsloo said:
Do you know where I can find the bootloaders? Or is it included in the roms?
Click to expand...
Click to collapse
Bootloader is included in the firmware. I do have a CWM flashable zip of the CNE5 firmware that I had made but has not been tested (I have personally flashed over same firmware without any issues, it goes through). It includes the modem & non-holos that you can delete before flashing. If you want to try you can get it from my GDrive https://docs.google.com/file/d/0ByY8uLVuRKD2ZHc0NGFsNjhPalk/edit?usp=docslist_api.
Put in the root of your internal sdcard. Power off and manully boot into recovery and flash.

Thanks Jason. I downloaded your file and then did the following
1. Removed non-holos and modem, rezipped, added to phone, switched off, into recovery and installed. Still the same bootloader.
2. Tried your file as is, i could just reload the modem later. All fine, but when i checked, it's still the same bootloader.
Any ideas?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Busy downloading the UK version XXUCNH2 from sammobile.
I'll load that stock rom and then root and install CM12 and see if the bootloader is updated
thanks for the help

nasaprinsloo said:
Busy downloading the UK version XXUCNH2 from sammobile.
I'll load that stock rom and then root and install CM12 and see if the bootloader is updated
thanks for the help
Click to expand...
Click to collapse
In case you have not yet flashed the CNH2 firmware, it would be a good idea to flash the CNE5 firmware as it does not have knox. You can get it from this link and then flash the modem you want separately.

nasaprinsloo said:
Busy downloading the UK version XXUCNH2 from sammobile.
I'll load that stock rom and then root and install CM12 and see if the bootloader is updated
thanks for the help
Click to expand...
Click to collapse
Enter download mode only after complete power off. Do not attempt to enter download mode from phone software menu or by holding Vol- when rebooting.
Lots of guides say double flashing is needed to "make it stick" [emoji15] Jasonrr and allram among others advice this unnecessary because download mode is entered wrong.
Jason Gdrive instructions
"Open Odin -> Untick Autoreboot -> Flash modem.bin in Phone part, reboot phone to download mode again and reflash modem.bin, same procedure with NON-Hlos.bin, flash twice -> reboot to ROM and check baseband version"
Allram http://forum.xda-developers.com/showthread.php?p=54959047
Both equally missing how to flash only once.
Here's what you need to flash safely, and I'm not telling you to select this or that modems. Read and choose what best fit your needs:
http://forum.xda-developers.com/showthread.php?p=56955843
Bevare the Thanks Button

O-T said:
Enter download mode only after complete power off. Do not attempt to enter download mode from phone software menu or by holding Vol- when rebooting.
Lots of guides say double flashing is needed to "make it stick" [emoji15] Jasonrr and allram among others advice this unnecessary because download mode is entered wrong.
Here's what you need to flash safely, and I'm not telling you to select this or that modems. Read and choose what best fit your needs:
http://forum.xda-developers.com/showthread.php?p=56955843
Bevare the Thanks Button
Click to expand...
Click to collapse
If you refer to the post above you will see that I have said to power off & manually boot into recovery & Never have I had to double flash any firmware or modem. So I really cannot understand the reason for this post.
Yes only once I had recommended it to someone who complained that after a couple of tries he was unable to flash & sometimes unothodox methods work.

thanks for that link Jason. The download and flash did not work. there must have been something wrong with the download i tried from sammobile. I ended up restoring a backup of slimkat I had after a couple of hrs struggling.
busy downloading the CNE5 one
And yes thanks O-T . I saw your posts on that when I" was searching for a solution the last couple of days. also the Power and volume up/down.
I came from SII so when I first tried with the home and it worked I assumed it was correct. now I can pick my nose while entering recovery/downoad

I see Jason tried to correct the modem flashing guide on his Gdrive, still some strange lines.
"...
Boot into download mode by holding power down + power key
...
Connect USB Cable"
Where is power down key?
Hardware key on the left side control sound dB level up and down. Guess this is the one. Most others call it volume key. System settings also use Volume.
Flashing by USB need connection to 5V powered plug. Lot of frustration from failed flash by USB hub can be avoided by emphasize to connect cable directly to computer USB.
Please read my thread. Use it instead of rewrite what's there. I will correct if you find something is missing.
Bevare the Thanks Button

stuck at samsung logo

my friends a305f A30 stuck at samsung logo
i tried factory reset from recovery but it didnt work
flashed 4 files firmware neither worked
the strange thing the device remains on samsung logo for 12 hours and the device temperature is like a the temperature when it is turned off

If you cannot recovery this phone by flashing full firmware with Odin, the internal memory is damaged.
Something you should try:
1. A30 has the ability to prevent downgrade flash, try the latest version always. If you flash old version, Odin will sometimes fail for no specific reason
2. Flash CSC instead of home CSC, leave it alone.
Sent from my Mi A2 using Tapatalk

abd96iq said:
my friends a305f A30 stuck at samsung logo
i tried factory reset from recovery but it didnt work
flashed 4 files firmware neither worked
the strange thing the device remains on samsung logo for 12 hours and the device temperature is like a the temperature when it is turned off
Click to expand...
Click to collapse
You nees install framework

Tayyab Sohail said:
You nees install framework
Click to expand...
Click to collapse
And how could i of install the framework while the device can't even boot up?

Did you solve the issue?
K9998 said:
If you cannot recovery this phone by flashing full firmware with Odin, the internal memory is damaged.
Something you should try:
1. A30 has the ability to prevent downgrade flash, try the latest version always. If you flash old version, Odin will sometimes fail for no specific reason
2. Flash CSC instead of home CSC, leave it alone.
Sent from my Mi A2 using Tapatalk
Click to expand...
Click to collapse
Did you solve the issue? I am facing similar problem with my friend's mobile

Neels.a said:
Did you solve the issue? I am facing similar problem with my friend's mobile
Click to expand...
Click to collapse
Yes, I got the similar problem because I flashed rooted boot.img provided by other people which doesn't match my current rom.
So I use lastest odin with lastest A30 rom (check carefully, the country code as well as the ISP)
For example, my A30 is SM-A305YN Australia XSA, if I try to flash OPP, TEL, VAU, it ALWAYS FAILS, but the process does not damage your phone so you can keep trying if you are not sure about the correct version. However your need to make sure reboot phone and re open the odin everytime when if failed.
Since I mentioned before, you cannot flash lower version than the rom your phone has, but you can flash the same version, so always use latest rom with latest odin.

i try install last one android 10 but same
i try the orginal one and same

suazouz said:
i try install last one android 10 but same
i try the orginal one and same
Click to expand...
Click to collapse
Here are some common mistakes or potential problems:
1. Didn't use USB 2.0
2. Didn't use back USB ports (those on motherboard)
3. Dodge cable
4. Wrong ROM files (or shows errors while decompression)
5. Put wrong files in wrong sections.(for example, put boot img in system section)
Provide log and screenshot maybe we can check which part is wrong
Sent from my Mi A2 using Tapatalk

This is what happened
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Takes 2 seconds then

You don't need to flash userdata section AFAIK
Sent from my Mi A2 using Tapatalk

Nothing changed

Samsung A30s
I have similar issues with mine.. Same Samsung A30s I have flashed stock ROM, But still stuck at LOGO

i try change motherboard and some cable nothing work

i find Motherboard connection cable is not like my model it's a505f
i will try change cable
and tell you it's work or not
https://ar.aliexpress.com/item/4000...earchweb0_0,searchweb201602_,searchweb201603_

Hello. I have the same problem as OP. It is stuck on Samsung galaxy A30 screen. I have flashed BL, AP, CP, and CSC through Odin. It passed successfully. Then the phone restarted. It should blue screen saying download updates for 2 sec then restarted and was stuck on the same first screen. Anyone can help. Is it hardware issue?

albachari said:
Hello. I have the same problem as OP. It is stuck on Samsung galaxy A30 screen. I have flashed BL, AP, CP, and CSC through Odin. It passed successfully. Then the phone restarted. It should blue screen saying download updates for 2 sec then restarted and was stuck on the same first screen. Anyone can help. Is it hardware issue?
Click to expand...
Click to collapse
:crying: if you fix this tell me

Did you solve the problem ? I also have this problem
Hello Sir
I also have this problem and my phone is stucked on Samsing Galaxy A30 logo after i rooted my phone it worked for a day and then suddenly got stucked.
Now it turns on and off automatically and doesn't go forward or backward using power button and vol down or vol up keys also doesn't work .
It's been a day but unfortunately the battery also doesn't go dead and it keeps shutting on and off .
Can you somehow help me ?
Thanks in adavance.

please i also face the same problem, has anyone of you fixed it yet?

Wajid Arya said:
Can you somehow help me ?
Click to expand...
Click to collapse
do force reboot (- volume and power)

Samsung Note 8 N950F Boot Loop after latest update

Hey
After the latest update, every time I called with the Note 8, it would restart and every time I would switch it off, it would start back on. So the first thing I did was boot to recovery mode and wipe cache partition. When I restarted the phone, I would get a "No command" error and it would always boot to the recovery mode. Next, I tried flashing the latest firmware (I made sure to use the right carrier, VDH) from SamMobile using Odin which still didn't work. Then I tried NAND erase and re-partition and this didn't work either.
I am very new to this so any solutions would be greatly appreciated
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

NoteEight said:
Hey
After the latest update, every time I called with the Note 8, it would restart and every time I would switch it off, it would start back on. So the first thing I did was boot to recovery mode and wipe cache partition. When I restarted the phone, I would get a "No command" error and it would always boot to the recovery mode. Next, I tried flashing the latest firmware (I made sure to use the right carrier, VDH) from SamMobile using Odin which still didn't work. Then I tried NAND erase and re-partition and this didn't work either.
I am very new to this so any solutions would be greatly appreciated
View attachment 5256493View attachment 5256495
Click to expand...
Click to collapse
NoteEight said:
Hey
After the latest update, every time I called with the Note 8, it would restart and every time I would switch it off, it would start back on. So the first thing I did was boot to recovery mode and wipe cache partition. When I restarted the phone, I would get a "No command" error and it would always boot to the recovery mode. Next, I tried flashing the latest firmware (I made sure to use the right carrier, VDH) from SamMobile using Odin which still didn't work. Then I tried NAND erase and re-partition and this didn't work either.
I am very new to this so any solutions would be greatly appreciated
View attachment 5256493View attachment 5256495
Click to expand...
Click to collapse
When you tried to flash stock with Odin did it pass? Fail? Did it give an error code? Did you download the latest filmware? As you can't flash older filmware than what is already on the phone.

stonedpsycho said:
When you tried to flash stock with Odin did it pass? Fail? Did it give an error code? Did you download the latest filmware? As you can't flash older filmware than what is already on the phone.
Click to expand...
Click to collapse
Hey, thanks for the reply
When I flashed with stock firmware, Odin said it passed. And I used the latest firmware for my carrier from SamMobile

NoteEight said:
Hey, thanks for the reply
When I flashed with stock firmware, Odin said it passed. And I used the latest firmware for my carrier from SamMobile
Click to expand...
Click to collapse
I was hoping that it was an issue with Odin so I could possibly help you, even having a look on the internet doesn't being much help other than trying a factory reset. I've been on xda for years and never seen this issue before. Hopefully someone more knowledgeable will see your post, I suggest bumping your thread every 24 hrs.
Having tried flashing stock with Odin which usually resolves most bugs I would guess that it is a hardware issue and if you're able to, take it to a service centre.
If you do find a solution please post it here on XDA for anyone who searches this in the future

stonedpsycho said:
I was hoping that it was an issue with Odin so I could possibly help you, even having a look on the internet doesn't being much help other than trying a factory reset. I've been on xda for years and never seen this issue before. Hopefully someone more knowledgeable will see your post, I suggest bumping your thread every 24 hrs.
Having tried flashing stock with Odin which usually resolves most bugs I would guess that it is a hardware issue and if you're able to, take it to a service centre.
If you do find a solution please post it here on XDA for anyone who searches this in the future
Click to expand...
Click to collapse
Thanks for trying. If I do find the solution, I'll be sure to post it here

Looks like the partition in your internal SSD has been corrupted and needs to be reformatted. If that doesn't work then you need to have the motherboard on your device replaced.

iceepyon said:
Looks like the partition in your internal SSD has been corrupted and needs to be reformatted. If that doesn't work then you need to have the motherboard on your device replaced.
Click to expand...
Click to collapse
How would I go about doing this?

Bump

The same thing happened to me. I tried everything possible. I tried a new flash via odin. unsuccessful. only Download mode works, nothing else works, not even recovery mode, black screen.

Have anyone found the solution to fix this issue ?

im having similar problems