Related
need help [urgent]
here I post command from CMD :
++++++++++++++++
C:\android>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 0.000s]
finished. total time: 0.000s
++++++++++++++++
C:\android>fastboot flash hboot vivo_downgrade.img
sending 'hboot' (1024 KB)...
OKAY [ 0.421s]
writing 'hboot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.546s
C:\android>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.172s]
finished. total time: 0.172s
++++++++++++++++
C:\android>fastboot flash recovery recovery.img
sending 'recovery' (5386 KB)...
OKAY [ 1.669s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.340s
C:\android>fastboot flash boot boot.img
sending 'boot' (3350 KB)...
OKAY [ 1.030s]
writing 'boot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.451s
+++++++++++++++++++++++++
C:\android>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 0.000s]
finished. total time: 0.000s
C:\android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.16.0000
(bootloader) version-baseband: 3805.09.03.27_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.30.707.1
(bootloader) serialno: HT155TD00844
(bootloader) imei: 355301044806969
(bootloader) product: vivo
(bootloader) platform: HBOOT-7630
(bootloader) modelid: PG3213000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3794mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d3a3895d
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.031s
+++++++++++++++++++++
I cant access RECOVERY MODE
I cant access My ROM/Stock ROM
Help me
wesly.btm said:
need help [urgent]
here I post command from CMD :
++++++++++++++++
C:\android>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 0.000s]
finished. total time: 0.000s
++++++++++++++++
C:\android>fastboot flash hboot vivo_downgrade.img
sending 'hboot' (1024 KB)...
OKAY [ 0.421s]
writing 'hboot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.546s
C:\android>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.172s]
finished. total time: 0.172s
++++++++++++++++
C:\android>fastboot flash recovery recovery.img
sending 'recovery' (5386 KB)...
OKAY [ 1.669s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.340s
C:\android>fastboot flash boot boot.img
sending 'boot' (3350 KB)...
OKAY [ 1.030s]
writing 'boot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.451s
+++++++++++++++++++++++++
C:\android>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 0.000s]
finished. total time: 0.000s
C:\android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.16.0000
(bootloader) version-baseband: 3805.09.03.27_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.30.707.1
(bootloader) serialno: HT155TD00844
(bootloader) imei: 355301044806969
(bootloader) product: vivo
(bootloader) platform: HBOOT-7630
(bootloader) modelid: PG3213000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3794mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d3a3895d
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.031s
+++++++++++++++++++++
I cant access RECOVERY MODE
I cant access My ROM/Stock ROM
Help me
Click to expand...
Click to collapse
What are you trying to accomplish? The vivo_downgrade.img is only used when you have Revolutionary S-OFF HBOOT installed. Also, you will only be able to use the 'fastboot flash' command when the bootloader is in the UNLOCKED state. The fact that you LOCKED it before the attempting the 'fastboot flash hboot' command probably saved you from making a huge mistake.
You have 2 options to get your phone operational again.
1. You need to UNLOCK your bootloader again then flash a custom Recovery and then flash a custom ROM.
2. Since you are now RELOCKED, you can take the 2.30.707.1 RUU and run it to return to stock.
You have 2 options to get your phone operational again.
1. You need to UNLOCK your bootloader again then flash a custom Recovery and then flash a custom ROM.
2. Since you are now RELOCKED, you can take the 2.30.707.1 RUU and run it to return to stock.
+++++++++++
pls advise, the link for Item 1 & 2?
thanks,
how to I get S-OFF,
since I cant load to Menu HTC forgot to check Setting > Developer Option > USB Debug
I cant access recovery mode.
wesly.btm said:
You have 2 options to get your phone operational again.
1. You need to UNLOCK your bootloader again then flash a custom Recovery and then flash a custom ROM.
2. Since you are now RELOCKED, you can take the 2.30.707.1 RUU and run it to return to stock.
+++++++++++
pls advise, the link for Item 1 & 2?
thanks,
Click to expand...
Click to collapse
wesly.btm said:
how to I get S-OFF,
since I cant load to Menu HTC forgot to check Setting > Developer Option > USB Debug
I cant access recovery mode.
Click to expand...
Click to collapse
If you want to gain S-OFF, you first will need to do option 1 and then use the Downgrade script.
If you need links, you should search this forum and read the sticky posts. If you have never unlocked the bootloader, then you need to use the procedure at HTCDEV.com. If you have used that procedure, then you can simply use the same unlock_token.bin again to unlock it.
tpbklake said:
If you want to gain S-OFF, you first will need to do option 1 and then use the Downgrade script.
If you need links, you should search this forum and read the sticky posts. If you have never unlocked the bootloader, then you need to use the procedure at HTCDEV.com. If you have used that procedure, then you can simply use the same unlock_token.bin again to unlock it.
Click to expand...
Click to collapse
I need help
short story:
Error when flashing RUU? ERROR [110]: FILE OPEN ERROR
Now, I know the problem was my Desire was S-OFF.
When pull out the USB cable:
[1]SPLASH 1 – OK
[2]USERDATA - OK
[3]SYSTEM - FAIL-PU
[4]RECOVERY - OK
[5]RADIO_CUST - OK
[6]RADIO_V2 - OK
[7]BOOTLOADER - Bypassed
[8]BOOT - OK
Partition update fail!
Update fail!
HTC logo when I turn on the phone with four figures on the squares
After that I tried to flash recovery with fastboot, but I can’t install my backup and the all custom room was frozen on the first boot.
My nandroid beckup:
system: 254MB
data: 128 MB
cache: 2,6 MB
First I tried to flash bravo_alpharev.img but it dosn’t work. The RUU flash was error as well.
I heard that:
flash- fastboot- bravo_downgrader.img
Now the error massege: RUU? ERROR [132]: SIGNATURE ERROR
http://forum.xda-developers.com/showthread.php?t=2214309
Fastboot flash:
[Q] Fastboot 'FAILED (remote: signature verify fail)
http://forum.xda-developers.com/showthread.php?t=1357625
+++++++++++++++++++++++++++++++
C:\android>fastboot flash recovery recovery.img
sending 'recovery' (5386 KB)...
OKAY [ 1.669s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.340s
++++++++++++++++++++++++++++++++++++++
C:\android>fastboot flash boot boot.img
sending 'boot' (3350 KB)...
OKAY [ 1.030s]
writing 'boot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.451s
++++++++++++++++
++++++++++++++++++++++++
C:\android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.80.0000
(bootloader) version-baseband: 4.06.00.02_2
(bootloader) version-cpld: None
(bootloader) version-microp: 051d
(bootloader) version-main: SetRuuNbhUpdate
(bootloader) serialno: SH0C4PL02400
(bootloader) imei: 355302049055073
(bootloader) product: Bravo
(bootloader) platform: HBOOT-8x50
(bootloader) modelid: PB9920000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3991mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-6175d920
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0 I have no displayed this last line
all: Done!
finished. total time: 0.031s
+++++++++++++++++++++++++++
Now I can’t turn on the phone. I can charging the buttery and if I connect the USB cable and my PC , I can use some base function but I can’t flashing.
So put something on the SD an turn on fastboot mode or any other mode is not working for my phone. If I try to turn on I have no nothing on the screen at the moment. Black screen….
I heard maybe I locked the bootloader so….
bootloader (bootloader lock) I try to unlock and I used HTCdev
Windows fail process stopped ect.
What can I do now?
Is there any solution for me?
GeriW said:
I need help
short story:
Error when flashing RUU? ERROR [110]: FILE OPEN ERROR
Now, I know the problem was my Desire was S-OFF.
When pull out the USB cable:
[1]SPLASH 1 – OK
[2]USERDATA - OK
[3]SYSTEM - FAIL-PU
[4]RECOVERY - OK
[5]RADIO_CUST - OK
[6]RADIO_V2 - OK
[7]BOOTLOADER - Bypassed
[8]BOOT - OK
Partition update fail!
Update fail!
HTC logo when I turn on the phone with four figures on the squares
After that I tried to flash recovery with fastboot, but I can’t install my backup and the all custom room was frozen on the first boot.
My nandroid beckup:
system: 254MB
data: 128 MB
cache: 2,6 MB
First I tried to flash bravo_alpharev.img but it dosn’t work. The RUU flash was error as well.
I heard that:
flash- fastboot- bravo_downgrader.img
Now the error massege: RUU? ERROR [132]: SIGNATURE ERROR
http://forum.xda-developers.com/showthread.php?t=2214309
Fastboot flash:
[Q] Fastboot 'FAILED (remote: signature verify fail)
http://forum.xda-developers.com/showthread.php?t=1357625
+++++++++++++++++++++++++++++++
C:\android>fastboot flash recovery recovery.img
sending 'recovery' (5386 KB)...
OKAY [ 1.669s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.340s
++++++++++++++++++++++++++++++++++++++
C:\android>fastboot flash boot boot.img
sending 'boot' (3350 KB)...
OKAY [ 1.030s]
writing 'boot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.451s
++++++++++++++++
++++++++++++++++++++++++
C:\android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.80.0000
(bootloader) version-baseband: 4.06.00.02_2
(bootloader) version-cpld: None
(bootloader) version-microp: 051d
(bootloader) version-main: SetRuuNbhUpdate
(bootloader) serialno: SH0C4PL02400
(bootloader) imei: 355302049055073
(bootloader) product: Bravo
(bootloader) platform: HBOOT-8x50
(bootloader) modelid: PB9920000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3991mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-6175d920
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0 I have no displayed this last line
all: Done!
finished. total time: 0.031s
+++++++++++++++++++++++++++
Now I can’t turn on the phone. I can charging the buttery and if I connect the USB cable and my PC , I can use some base function but I can’t flashing.
So put something on the SD an turn on fastboot mode or any other mode is not working for my phone. If I try to turn on I have no nothing on the screen at the moment. Black screen….
I heard maybe I locked the bootloader so….
bootloader (bootloader lock)I try to unlock and I used HTCdev
Windows fail process stopped ect.
What can I do now?
Is there any solution for me?
Click to expand...
Click to collapse
Why do you reply to a thread that is more than a year old?
As well as this, you have posted in the wrong device forum. This is for the HTC Incredible S, not the HTC Desire xD
You may have better luck in the Desire forum
Sent from my Nexus 5
I've got a HTC One At&t that I converted to GE using the HTC Bootloader Unlock tool and rumrunner to s-off. installed 4.4.2 OTA. Everything worked great. Until
tried to revert back to stock. I changed cid back to (CWS__001) locked bootloader using fastboot. tried To run RUU JB 4.3 from HTC Keep getting error (155).
now my bootloader is Relocked and S=on. And twrp is gone with no recovery. So is SuperUser. Need help reverting back to stock.
fastboot: getvar version
fastboot out: version: 0.5
finished. total time: 0.000s
fastboot: getvar version-bootloader
fastboot out: version-bootloader: 1.54.0000
finished. total time: -0.000s
fastboot: getvar version-main
fastboot out: version-main: 3.62.1700.1
finished. total time: 0.000s
fastboot: getvar product
fastboot out: product: m7_ul
finished. total time: 0.000s
fastboot: getvar modelid
fastboot out: modelid: PN0712000
finished. total time: 0.000s
fastboot: getvar cidnum
fastboot out: cidnum: CWS__001
finished. total time: -0.000s
fastboot: getvar build-mode
fastboot out: build-mode: SHIP
finished. total time: -0.000s
fastboot: getvar boot-mode
fastboot out: boot-mode: FASTBOOT
finished. total time: 0.000s
fastboot: getvar security
fastboot out: security: on
finished. total time: -0.000s
Here's what I've Tried.
c:\fastboot>fastboot oem unlock
...
(bootloader) [PG_ERROR] htc_pg_part_traverse(839):
(bootloader) invalid traverse range
(bootloader) [PG_ERROR] htc_pg_part_read(1029):
(bootloader) htc_pg_part_traverse failed
(bootloader) [DISPLAY_ERR] sp_custom partition: unlock_disp_buf.img_buf r
(bootloader) ead error!
(bootloader) [DISPLAY_ERR] Can not load custom splash!
(bootloader) Loading custom splash failed!
OKAY [ 0.531s]
finished. total time: 0.531s
C:\fastboot>fastboot flash recovery recovery.img
target reported max download size of 1526722560 bytes
sending 'recovery' (9184 KB)...
OKAY [ 1.063s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.719s
C:\fastboot>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 1.063s]
booting...
FAILED (remote: not allowed)
finished. total time: 1.063s
ATT 3.17.502.3 won't work because version is lower than your current 3.62.1700.1. Hate to say it but you are stuck until ATT releases an RUU for 4.18.502.7
s.noob said:
I've got a HTC One At&t that I converted to GE using the HTC Bootloader Unlock tool and rumrunner to s-off. installed 4.4.2 OTA. Everything worked great. Until
tried to revert back to stock. I changed cid back to (CWS__001) locked bootloader using fastboot. tried To run RUU JB 4.3 from HTC Keep getting error (155).
now my bootloader is Relocked and S=on. And twrp is gone with no recovery. So is SuperUser. Need help reverting back to stock.
fastboot: getvar version
fastboot out: version: 0.5
finished. total time: 0.000s
fastboot: getvar version-bootloader
fastboot out: version-bootloader: 1.54.0000
finished. total time: -0.000s
fastboot: getvar version-main
fastboot out: version-main: 3.62.1700.1
finished. total time: 0.000s
fastboot: getvar product
fastboot out: product: m7_ul
finished. total time: 0.000s
fastboot: getvar modelid
fastboot out: modelid: PN0712000
finished. total time: 0.000s
fastboot: getvar cidnum
fastboot out: cidnum: CWS__001
finished. total time: -0.000s
fastboot: getvar build-mode
fastboot out: build-mode: SHIP
finished. total time: -0.000s
fastboot: getvar boot-mode
fastboot out: boot-mode: FASTBOOT
finished. total time: 0.000s
fastboot: getvar security
fastboot out: security: on
finished. total time: -0.000s
Here's what I've Tried.
c:\fastboot>fastboot oem unlock
...
(bootloader) [PG_ERROR] htc_pg_part_traverse(839):
(bootloader) invalid traverse range
(bootloader) [PG_ERROR] htc_pg_part_read(1029):
(bootloader) htc_pg_part_traverse failed
(bootloader) [DISPLAY_ERR] sp_custom partition: unlock_disp_buf.img_buf r
(bootloader) ead error!
(bootloader) [DISPLAY_ERR] Can not load custom splash!
(bootloader) Loading custom splash failed!
OKAY [ 0.531s]
finished. total time: 0.531s
C:\fastboot>fastboot flash recovery recovery.img
target reported max download size of 1526722560 bytes
sending 'recovery' (9184 KB)...
OKAY [ 1.063s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.719s
C:\fastboot>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 1.063s]
booting...
FAILED (remote: not allowed)
finished. total time: 1.063s
Click to expand...
Click to collapse
OMG why did you relocked bootloader and turned security back on?
can you unlock via htcdev.com? Also post your ''fastboot getvar all'' minus IMEI and s/n
If you cant unlock from htcdev.com, I think your device might be bricked...
cschmitt said:
ATT 3.17.502.3 won't work because version is lower than your current 3.62.1700.1. Hate to say it but you are stuck until ATT releases an RUU for 4.18.502.7
Click to expand...
Click to collapse
Kind of figured that was the case. Thought someone would know a work around.
alray said:
OMG why did you relocked bootloader and turned security back on?
can you unlock via htcdev.com? Also post your ''fastboot getvar all'' minus IMEI and s/n
If you cant unlock from htcdev.com, I think your device might be bricked...
Click to expand...
Click to collapse
Device still works great as GE just wanted to go Back to stock.
s.noob said:
Device still works great as GE just wanted to go Back to stock.
Click to expand...
Click to collapse
Good. Do you still have su in GE, or the temp root exploit, and s-off again then the 3.17.502.3 RUU will work. Then take the OTA to 4.4.2.
s.noob said:
Device still works great as GE just wanted to go Back to stock.
Click to expand...
Click to collapse
Your HBOOT is 1.54.0000, I think you can use rumrunner or firewater to get S-OFF again and flash the old 1.44.0000 HBOOT via fastboot, then run the RUU again.
Don't have superuser. Tried temp root and firewater. Didn't work
Sent from my HTC One using xda app-developers app
Hello all so I unlocked my boot loader and then I think something odd happened BC it's saying its locked buy still seems to be unlocked. Anyway I keep done loading firmware and side loading iywand it simply won't work if any of you can makd full tsrp backup I could use twrp to hopefully rescue devjcs
this is when i attemp the unlock again
PS C:\Users\Jack\Desktop\New folder> fastboot.exe oem unlock X46SMX5XO4VBGBTL6XO4
...
(bootloader) invalid boot state
OKAY [ 0.004s]
finished. total time: 0.006s
PS C:\Users\Jack\Desktop\New folder>
this is what happens when attempting flashingfactory image
PS C:\Users\Jack\Desktop\New folder> fastboot.exe oem unlock X46SMX5XO4VBGBTL6XO4
...
(bootloader) invalid boot state
OKAY [ 0.004s]
finished. total time: 0.006s
PS C:\Users\Jack\Desktop\New folder>
PS C:\Users\Jack\Desktop\New folder> fastboot flash partition gpt.bin
>> fastboot flash bootloader bootloader.img
>> fastboot flash modem NON-HLOS.bin
>> fastboot flash fsg fsg.mbn
>> fastboot erase modemst1
>> fastboot erase modemst2
>> fastboot flash bluetooth BTFM.bin
>> fastboot flash dsp dspso.bin
>> fastboot flash boot boot.img
>> fastboot flash system system.img_sparsechunk.# (do this for each numbered variant normally starting with 0)
>> fastboot flash system_b system_b.img_sparsechunk.# (do this for each numbered variant normally starting with 0)
>> fastboot flash oem oem.img
>> fastboot flash oem_b oem_other.img
>> fastboot flash vendor vendor.img_sparsechunk.# (do this for each numbered variant normally starting with 0)
>> fastboot erase carrier
>> fastboot erase userdata
>> fastboot erase DDR
>> fastboot flash logo logo.bin
>> fastboot reboot
< waiting for device >
target reported max download size of 535822336 bytes
sending 'partition' (45 KB)...
OKAY [ 0.006s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote failure)
finished. total time: 0.073s
target reported max download size of 535822336 bytes
sending 'bootloader' (7483 KB)...
OKAY [ 0.244s]
writing 'bootloader'...
(bootloader) Validating 'bootloader.default.xml'
(bootloader) Committing 'bootloader.default.xml'
(bootloader) - flashing 'emmc_appsboot.mbn' to 'aboot'
(bootloader) - flashing 'rpm.mbn' to 'rpm'
(bootloader) - flashing 'tz.mbn' to 'tz'
(bootloader) - flashing 'devcfg.mbn' to 'devcfg'
(bootloader) - flashing 'cmnlib.mbn' to 'cmnlib'
(bootloader) - flashing 'cmnlib64.mbn' to 'cmnlib64'
(bootloader) - flashing 'keymaster.mbn' to 'keymaster'
(bootloader) - flashing 'prov.mbn' to 'prov'
(bootloader) - flashing 'sbl1.mbn' to 'sbl1'
OKAY [ 0.522s]
finished. total time: 0.780s
target reported max download size of 535822336 bytes
sending 'modem' (76610 KB)...
OKAY [ 2.414s]
writing 'modem'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 2.440s
target reported max download size of 535822336 bytes
sending 'fsg' (1984 KB)...
OKAY [ 0.065s]
writing 'fsg'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 0.071s
erasing 'modemst1'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.018s
erasing 'modemst2'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.017s
error: cannot load 'BTFM.bin'
error: cannot load 'dspso.bin'
target reported max download size of 535822336 bytes
sending 'boot' (16384 KB)...
OKAY [ 0.521s]
writing 'boot'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 0.545s
do : The term 'do' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the
spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:10 char:49
+ fastboot flash system system.img_sparsechunk.# (do this for each numb ...
+ ~~
+ CategoryInfo : ObjectNotFound: (do:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
do : The term 'do' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the
spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:11 char:53
+ fastboot flash system_b system_b.img_sparsechunk.# (do this for each ...
+ ~~
+ CategoryInfo : ObjectNotFound: (do:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
target reported max download size of 535822336 bytes
sending 'oem' (150840 KB)...
OKAY [ 4.749s]
writing 'oem'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 4.774s
error: cannot load 'oem_other.img'
do : The term 'do' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the
spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:14 char:49
+ fastboot flash vendor vendor.img_sparsechunk.# (do this for each numb ...
+ ~~
+ CategoryInfo : ObjectNotFound: (do:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
erasing 'carrier'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.006s
erasing 'userdata'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.022s
erasing 'DDR'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.006s
target reported max download size of 535822336 bytes
sending 'logo' (1423 KB)...
OKAY [ 0.055s]
writing 'logo'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 0.087s
rebooting...
finished. total time: 0.111s
PS C:\Users\Jack\Desktop\New folder> fastboot oem config
...
(bootloader) <UTAG name="battery" protected="false">
(bootloader) <value>
(bootloader) </value>
(bootloader) <description>
(bootloader) Battery detection control
(bootloader) ("test" or "no_eprom")
(bootloader) </description>
(bootloader) </UTAG>
(bootloader) <UTAG name="bootmode" protected="false">
(bootloader) <value>
(bootloader) </value>
(bootloader) <description>
(bootloader) To force certain bootmode
(bootloader) (valid values are "fastboot", "factory", "bp-tools", "q
(bootloader) com", and "on-device-diag")
(bootloader) </description>
(bootloader) </UTAG>
(bootloader) <UTAG name="carrier" protected="false">
(bootloader) <value>
(bootloader) </value>
(bootloader) <description>
(bootloader) Carrier IDs, see http://goo.gl/lojLh3
(bootloader) </description>
(bootloader) </UTAG>
(bootloader) <UTAG name="factory_kill_timeout" protected="false">
(bootloader) <value>
(bootloader) </value>
(bootloader) <description>
(bootloader) Timeout to shutdown in factory if usb is disconnected.
(bootloader) By default, this feature is disabled.
(bootloader) 0 - shutdown immediately
(bootloader) n - shutdown phone in n seconds: 1 ~ 100
(bootloader)
(bootloader) </description>
(bootloader) </UTAG>
(bootloader) <UTAG name="fsg-id" protected="false">
(bootloader) <value>
(bootloader) </value>
(bootloader) <description>
(bootloader) FSG IDs, see http://goo.gl/gPmhU
(bootloader) </description>
(bootloader) </UTAG>
(bootloader) <UTAG name="enable_dump_gpt" protected="false">
(bootloader) <value>
(bootloader) </value>
(bootloader) <description>
(bootloader) Indicate if the oem command to dump gpt is enabled (tru
(bootloader) e|false)
(bootloader) </description>
(bootloader) </UTAG>
OKAY [ 0.141s]
finished. total time: 0.144s
Does anyone know how to remove the flashing_lock and your device has loaded a different operating system to get back to the stock market?
Pictures:https://photos.app.goo.gl/B8UQEMkfR7E1mp4cA
my device:Revvlry Plus
model number:XT1965-T
Picture 1 and 3 are included in your logo.bin which is stored on your logo partition (/dev/block/by-name/logo). They appear when you unlock the bootloader. To change them you should flash a custom boot logo.
Picture 2 is the normal fastboot menu.
Did you try to flash a firmware?
you are not the only one who has the same problem
WoKoschekk said:
Picture 1 and 3 are included in your logo.bin which is stored on your logo partition (/dev/block/by-name/logo). They appear when you unlock the bootloader. To change them you should flash a custom boot logo.
Picture 2 is the normal fastboot menu.
Did you try to flash a firmware?
Click to expand...
Click to collapse
yes, flash firmware but as a device it says that bootloader is flashing_locked and doesn't allow me to flash it, it asks me for a signed image.
and for custom logo.bin I have to unlock bootloader and that doesn't help me, I want to leave it as factory stock rom.
my device:Revvlry Plus
model number:XT1965-T
darkherman said:
yes, flash firmware but as a device it says that bootloader is flashing_locked and doesn't allow me to flash it, it asks me for a signed image.
and for custom logo.bin I have to unlock bootloader and that doesn't help me, I want to leave it as factory stock rom.
my device:Revvlry Plus
model number:XT1965-T
Click to expand...
Click to collapse
The current firmware on your device can be found via fastboot command
Code:
fastboot getvar ro.build.fingerprint
Output is (e.g. my device):
(bootloader)ro.build.fingerprint[0]:motorola/ali_n/ali_
n:9/PPSS29.55-3
(bootloader) ro.build.fingerprint[1]: 7-7-2/924b9:user/
release-keys
You should read fingerprint[0] and fingerprint[1] as one line:
motorola/ali_n/ali_n:9/PPSS29.55-37-7-2/924b9:user/release-keys
In this case my current firmware is:
PPSS29.55-37-7-2
Here is a link to your firmware builds.
https://mirrors.lolinet.com/firmware/moto/lake/official/TMO/
Download the firmware that is matching with the output of the fastboot command and flash it. That should restore your boot logo.
WoKoschekk said:
The current firmware on your device can be found via fastboot command
Code:
fastboot getvar ro.build.fingerprint
Output is (e.g. my device):
(bootloader)ro.build.fingerprint[0]:motorola/ali_n/ali_
n:9/PPSS29.55-3
(bootloader) ro.build.fingerprint[1]: 7-7-2/924b9:user/
release-keys
You should read fingerprint[0] and fingerprint[1] as one line:
motorola/ali_n/ali_n:9/PPSS29.55-37-7-2/924b9:user/release-keys
In this case my current firmware is:
PPSS29.55-37-7-2
Here is a link to your firmware builds.
https://mirrors.lolinet.com/firmware/moto/lake/official/TMO/
Download the firmware that is matching with the output of the fastboot command and flash it. That should restore your boot logo.
Click to expand...
Click to collapse
if I tried that and it says denied, what I'm trying to do is get it back to normal because it blocks bootloader again and says: your device has loaded a different operating system
What was denied? The fastboot command to get the build? Then download the latest firmware from page provided in my link. You can always flash the same firmware that is already installed. You must try it.
---------- Post added at 10:38 PM ---------- Previous post was at 10:22 PM ----------
Is it possible to boot up into system? Then go to settings > system > about phone and search the build number. Download the right firmware and try to flash it with the mfastboot tool. It's nearly the same as fastboot but was made for Motorola devices and firmware.
Maybe it is possible to flash only the logo.bin??
Or use the Lenovo Motorola Smart Assistant to get back to stock.
WoKoschekk said:
What was denied? The fastboot command to get the build? Then download the latest firmware from page provided in my link. You can always flash the same firmware that is already installed. You must try it.
---------- Post added at 10:38 PM ---------- Previous post was at 10:22 PM ----------
Is it possible to boot up into system? Then go to settings > system > about phone and search the build number. Download the right firmware and try to flash it with the mfastboot tool. It's nearly the same as fastboot but was made for Motorola devices and firmware.
Maybe it is possible to flash only the logo.bin??
Or use the Lenovo Motorola Smart Assistant to get back to stock.
Click to expand...
Click to collapse
LMSA doesn't work, post it here https://forums.lenovo.com/t5/moto-g7-play-moto-g7-moto-g7/Revvlry-not-support-LMSA/td-p/4644912
in command mfastboot is denying me all commands to write the corresponding partition
darkherman said:
LMSA doesn't work, post it here https://forums.lenovo.com/t5/moto-g7-play-moto-g7-moto-g7/Revvlry-not-support-LMSA/td-p/4644912
in command mfastboot is denying me all commands to write the corresponding partition
Click to expand...
Click to collapse
That's strange... Are you able to boot into system?
WoKoschekk said:
That's strange... Are you able to boot into system?
Click to expand...
Click to collapse
The system boots perfectly, but the thing that doesn't work is that the verity boot of A/B that detects the integrity of the system is broken and in play store it says that the device is not certified and no apps like netflix appear and other similar apps don't appear
Enviado desde mi Moto G7 Plus mediante Tapatalk
Why did you flash another firmware with a locked bootloader?? You won't be able to install further updates with broken verity.
Which build is installed and which build are you trying to flash?
WoKoschekk said:
Why did you flash another firmware with a locked bootloader?? You won't be able to install further updates with broken verity.
Which build is installed and which build are you trying to flash?
Click to expand...
Click to collapse
do not flash other firmware I have only used TMO and you know well that it will not allow me to install other firmware from another market.
I want to return the stock rom and because I don't like to use custom rom at the moment and I want to remove the message that I know in picture when device is turning on.
log fastboot getvar all:
Code:
PS C:\Users\yunio> fastboot getvar all (bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-lake_revvl-e7be04b-191127
(bootloader) product: lake
(bootloader) board: lake
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: TMO
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB SAMSUNG DH6DAB RV=08 PV=02 FV=0000000000000002
(bootloader) ufs: N/A
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: SDM636 1.0 (2)
(bootloader) serialno: ZY226GNL47
(bootloader) cid: 0x0015
(bootloader) channelid: 0x85
(bootloader) uid: 3F6F892B
(bootloader) securestate: flashing_locked
(bootloader) verity-state: disabled (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei:
(bootloader) meid:
(bootloader) date: 07-26-2019
(bootloader) sku: XT1965-T
(bootloader) carrier_sku: XT1965-T
(bootloader) battid: SB18C53460
(bootloader) battery-voltage: 3752
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/lake_revvl_n/lake_n:9/PCW
(bootloader) ro.build.fingerprint[1]: S29.83-56-8/db4d:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.221.7.lake_rv.rev
(bootloader) ro.build.version.full[1]: vl.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.2.r1-05900-sdm660.0
(bootloader) version-baseband: M636_08.23.02.46R LAKE_TMO_CUST
(bootloader) kernel.version[0]: Linux version 4.4.153-perf-g1b289e4 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 201
(bootloader) kernel.version[2]: 50123 (prerelease) (GCC) ) #1 SMP PREEMP
(bootloader) kernel.version[3]: T Wed Nov 27 03:41:16 CST 2019
(bootloader) git:abl: MBM-3.0-lake_revvl-e7be04b-191127
(bootloader) git:xbl: MBM-3.0-lake_revvl-a366ae0-191127
(bootloader) git:pmic: MBM-3.0-lake_revvl-a366ae0-191127
(bootloader) git:rpm: MBM-3.0-lake_revvl-33b79ec-191127
(bootloader) git:tz: MBM-3.0-lake_revvl-25bf0b3-191127
(bootloader) git:hyp: MBM-3.0-lake_revvl-25bf0b3-191127
(bootloader) git:devcfg: MBM-3.0-lake_revvl-25bf0b3-191127
(bootloader) git:cmnlib: MBM-3.0-lake_revvl-25bf0b3-191127
(bootloader) git:cmnlib64: MBM-3.0-lake_revvl-25bf0b3-191127
(bootloader) git:keymaster: MBM-3.0-lake_revvl-25bf0b3-191127
(bootloader) git:prov: MBM-3.0-lake_revvl-25bf0b3-191127
(bootloader) git:storsec: MBM-3.0-lake_revvl-25bf0b3-191127
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: tmo
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 0
all: listed above
Finished. Total time: 0.243s
log flash firmware command
Code:
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot getvar max-sparse-size
max-sparse-size: 268435456
finished. total time: 0.107s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot oem fb_mode_set
...
OKAY [ 0.005s]
finished. total time: 0.006s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (37 KB)...
OKAY [ 0.006s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Committing 'gpt.default.xml'
(bootloader) - flashing 'gpt_main0.bin' to 'partition:0'
OKAY [ 0.136s]
finished. total time: 0.144s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot flash bootloader bootloader.img
target max-sparse-size: 256MB
sending 'bootloader' (9520 KB)...
OKAY [ 1.864s]
writing 'bootloader'...
(bootloader) Validating 'bootloader.default.xml'
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) Cancelling 'bootloader.default.xml'
FAILED (remote failure)
finished. total time: 1.984s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (76476 KB)...
OKAY [ 2.542s]
writing 'modem'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 2.547s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot flash fsg fsg.mbn
target max-sparse-size: 256MB
sending 'fsg' (9408 KB)...
OKAY [ 0.307s]
writing 'fsg'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 0.320s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot erase modemst1
erasing 'modemst1'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.005s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot erase modemst2
erasing 'modemst2'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.012s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot flash bluetooth BTFM.bin
target max-sparse-size: 256MB
sending 'bluetooth' (400 KB)...
OKAY [ 0.016s]
writing 'bluetooth'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 0.027s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot flash dsp dspso.bin
target max-sparse-size: 256MB
sending 'dsp' (16384 KB)...
OKAY [ 0.530s]
writing 'dsp'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 0.534s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot flash logo logo.bin
target max-sparse-size: 256MB
sending 'logo' (2560 KB)...
OKAY [ 0.084s]
writing 'logo'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 0.088s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (22153 KB)...
OKAY [ 0.710s]
writing 'boot'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 0.718s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot flash dtbo dtbo.img
target max-sparse-size: 256MB
sending 'dtbo' (16 KB)...
OKAY [ 0.004s]
writing 'dtbo'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 0.020s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot flash system system.img_sparsechunk.0
target max-sparse-size: 256MB
Sparse-Flash is enabled!
sending sparse 'system' (262140 KB)...
OKAY [ 15.573s]
writing 'system'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 15.637s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot flash system system.img_sparsechunk.1
target max-sparse-size: 256MB
Sparse-Flash is enabled!
sending sparse 'system' (262140 KB)...
OKAY [ 10.307s]
writing 'system'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 10.315s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot flash system system.img_sparsechunk.2
target max-sparse-size: 256MB
Sparse-Flash is enabled!
sending sparse 'system' (262140 KB)...
OKAY [ 9.359s]
writing 'system'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 9.366s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot flash system system.img_sparsechunk.3
target max-sparse-size: 256MB
Sparse-Flash is enabled!
sending sparse 'system' (262140 KB)...
OKAY [ 9.381s]
writing 'system'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 9.386s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot flash system system.img_sparsechunk.4
target max-sparse-size: 256MB
Sparse-Flash is enabled!
sending sparse 'system' (235264 KB)...
OKAY [ 8.524s]
writing 'system'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 8.530s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot flash system_b system_b.img_sparsechunk.0
target max-sparse-size: 256MB
Sparse-Flash is enabled!
sending sparse 'system_b' (262140 KB)...
OKAY [ 9.284s]
writing 'system_b'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 9.289s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot flash system_b system_b.img_sparsechunk.1
target max-sparse-size: 256MB
sending 'system_b' (45272 KB)...
OKAY [ 1.453s]
writing 'system_b'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 1.457s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot flash vendor vendor.img
target max-sparse-size: 256MB
Sparse-Flash is enabled!
sending sparse 'vendor' (262140 KB)...
OKAY [ 9.271s]
writing 'vendor'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 9.276s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot flash oem oem.img
target max-sparse-size: 256MB
sending 'oem' (136156 KB)...
OKAY [ 4.350s]
writing 'oem'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 4.355s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot flash oem_b oem_other.img
target max-sparse-size: 256MB
sending 'oem_b' (92264 KB)...
OKAY [ 2.945s]
writing 'oem_b'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 2.952s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot erase carrier
erasing 'carrier'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.004s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot erase userdata
erasing 'userdata'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.008s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot erase ddr
erasing 'ddr'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.014s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>mfastboot oem fb_mode_clear
...
OKAY [ 0.002s]
finished. total time: 0.003s
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>echo -------------------------------------------------------------------------
-------------------------------------------------------------------------
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>echo please scroll up and check your flash for any errors
please scroll up and check your flash for any errors
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>echo -------------------------------------------------------------------------
-------------------------------------------------------------------------
C:\Windows.old\Users\Will Celular\Downloads\Compressed\XT1965-T_LAKE_REVVL_9.0_PCWS29.83-56-8_subsidy-TMO_SPR_RSU_QCOM_regulatory-DEFAULT_CFC.xml>pause
Any solutions?
darkherman said:
Any solutions?
Click to expand...
Click to collapse
Your getvar all says bootloader is locked
Sent from my mata using XDA Labs
---------- Post added at 06:33 PM ---------- Previous post was at 06:30 PM ----------
Nevermind wrong thread
Sent from my mata using XDA Labs
---------- Post added at 07:17 PM ---------- Previous post was at 06:33 PM ----------
darkherman said:
Any solutions?
Click to expand...
Click to collapse
The only solution I see is
Unlock the bootloader
Root with magisk
Magisk can hide the unlocked bootloader
Sent from my mata using XDA Labs
sd_shadow said:
Your getvar all says bootloader is locked
Sent from my mata using XDA Labs
---------- Post added at 06:33 PM ---------- Previous post was at 06:30 PM ----------
Nevermind wrong thread
Sent from my mata using XDA Labs
---------- Post added at 07:17 PM ---------- Previous post was at 06:33 PM ----------
The only solution I see is
Unlock the bootloader
Root with magisk
Magisk can hide the unlocked bootloader
Sent from my mata using XDA Labs
Click to expand...
Click to collapse
I don't like to use magisk for daily use, I only use it for development and testing.
thanks for everything
darkherman said:
Any solutions?
Click to expand...
Click to collapse
Unlock the bootloader, flash the firmware and relock the bootloader. As I can see in your output of "getvar all" the warranty is already void. So you won't loose anything by it.
darkherman said:
Does anyone know how to remove the flashing_lock and your device has loaded a different operating system to get back to the stock market?
Pictures:https://photos.app.goo.gl/B8UQEMkfR7E1mp4cA
my device:Revvlry Plus
model number:XT1965-T
Click to expand...
Click to collapse
Managed to solve?
Copo Gold said:
Managed to solve?
Click to expand...
Click to collapse
MotoBootLogoMaker
Download MotoBootLogoMaker for free. Change Motorola splash screen --> logo.bin. Moto Boot Logo Maker for Motorola Moto Devices (4MiB, 6MiB, 8MiB, 16MiB & 32MiB) - All Moto devices supported Source Code: https://github.com/Franco28/Moto_Boot_Logo_Maker
sourceforge.net
I have a moto z3 play (device name beckham) which I can't factory reset now. What happens is when I go to Settings > Advanced > Reset options > Erase all data (factory reset) but the phone simply restart (reboots) back. I also tried going to fastboot mode and running the command from there and the behavior ends up the same. My third attempt was to just do like this post but when I run the `fastboot` commands it fails with the error:
> $ fastboot erase userdata <br>(bootloader) has: not found Erasing<br>
> 'userdata' FAILED (remote: 'unknown<br>
> command') fastboot: error: Command failed<br> $ fastboot erase cache<br>
> (bootloader) partiti: not found Erasing 'cache'<br>
> (bootloader) Invalid partition name cacheiti FAILED (remote: '')<br>
> fastboot: error: Command failed<br>
Click to expand...
Click to collapse
Any idea on that? Thx
**Edit** All attempts were made in both USB 2.0 and 3.0
Tried in another pc (all of them linux) and also with older version (r30 and r25.0.4) of fastboot, the error gets even stranger since each time gives a different output for same input:
[$ platform-tools]$ sudo ./fastboot devices
0048267113 fastboot
[$ platform-tools]$ sudo ./fastboot erase userdata
erasing 'userdata'...
(bootloader) Invalid partition name userdataon-type:us
FAILED (remote failure)
finished. total time: 0.001s
[$ platform-tools]$ sudo ./fastboot erase userdata
(bootloader) slot-co: not found
(bootloader) slot-suffi: not found
(bootloader) partition-typ: not found
erasing 'userdata'...
(bootloader) Invalid partition name userdataon-typ
FAILED (remote failure)
finished. total time: 0.001s
[$ platform-tools]$ sudo ./fastboot erase userdata
(bootloader) slot-counttyp: not found
(bootloader) slot-su: not found
(bootloader) slot-suffi: not found
(bootloader) partition-typ: not found
erasing 'userdata'...
(bootloader) Invalid partition name userdataon-typ
FAILED (remote failure)
finished. total time: 0.001s
[$ platform-tools]$ sudo ./fastboot erase userdata
(bootloader) slot-counttyp: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-su: not found
erasing 'userdata'...
(bootloader) Invalid partition name userdataon-typ
FAILED (remote failure)
finished. total time: 0.001s
[$ platform-tools]$ sudo ./fastboot erase cache
(bootloader) slot-counttyp: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slo: not found
(bootloader) partition-: not found
erasing 'cache'...
FAILED (remote: unknown command)
finished. total time: 0.000s
Click to expand...
Click to collapse
bump
have you tried to do a recovery with the device manager tool through motorola
no because I'm using linux and these are only available in windows